Added SPI burst mode to spi 8 bit.
Dependents: Bicycl_Computer_NUCLEO-F411RE Bicycl_Computer_NUCLEO-L476RG
Fork of UniGraphic by
Added SPI burst mode to this graphics driver. If whoever wants this rolled in to repository let me know. I replaced _spi.write(); with fastWrite(); and clearRX();
SPI8.cpp
// need to re-create SPI firmware to access SPI handle static SPI_HandleTypeDef SpiHandle; void SPI8::fastWrite(int data) { SpiHandle.Instance = SPI1; // Check if data is transmitted while ((SpiHandle.Instance->SR & SPI_SR_TXE) == 0); SpiHandle.Instance->DR = data; } void SPI8::clearRX( void ) { SpiHandle.Instance = SPI1; //Check if the RX buffer is busy //While busy, keep checking while (SpiHandle.Instance->SR & SPI_SR_BSY){ // Check RX buffer readable while ((SpiHandle.Instance->SR & SPI_SR_RXNE) == 0); int dummy = SpiHandle.Instance->DR; } }
Diff: Protocols/PAR8.h
- Revision:
- 7:bb0383b91104
- Parent:
- 6:8356d48a07db
- Child:
- 11:b842b8e332cb
diff -r 8356d48a07db -r bb0383b91104 Protocols/PAR8.h --- a/Protocols/PAR8.h Mon Feb 16 01:18:29 2015 +0000 +++ b/Protocols/PAR8.h Tue Feb 17 11:02:06 2015 +0000 @@ -75,19 +75,26 @@ */ virtual void wr_grambuf(unsigned short* data, unsigned int lenght); - /** Read 4x8bit data from display controller (with dummy cycle) - * - * @returns data as uint - * - */ - virtual unsigned int rd_data32_wdummy(); - /** Read 16bit pixeldata from display controller (with dummy cycle) * * @returns 16bit color */ virtual unsigned short rd_gram(); + /** Read 4x8bit register data (with dummy cycle) + * @param reg the register to read + * @returns data as uint + * + */ + virtual unsigned int rd_reg_data32(unsigned char reg); + + /** Read 3x8bit ExtendedCommands register data + * @param reg the register to read + * @returns data as uint + * @note EXTC regs (0xB0 to 0xFF) are read/write registers, for Parallel mode directly accessible in both directions + */ + virtual unsigned int rd_extcreg_data32(unsigned char reg, unsigned char SPIreadenablecmd); + /** HW reset sequence (without display init commands) */ virtual void hw_reset();