Added SPI burst mode to spi 8 bit.
Dependents: Bicycl_Computer_NUCLEO-F411RE Bicycl_Computer_NUCLEO-L476RG
Fork of UniGraphic by
Added SPI burst mode to this graphics driver. If whoever wants this rolled in to repository let me know. I replaced _spi.write(); with fastWrite(); and clearRX();
SPI8.cpp
// need to re-create SPI firmware to access SPI handle static SPI_HandleTypeDef SpiHandle; void SPI8::fastWrite(int data) { SpiHandle.Instance = SPI1; // Check if data is transmitted while ((SpiHandle.Instance->SR & SPI_SR_TXE) == 0); SpiHandle.Instance->DR = data; } void SPI8::clearRX( void ) { SpiHandle.Instance = SPI1; //Check if the RX buffer is busy //While busy, keep checking while (SpiHandle.Instance->SR & SPI_SR_BSY){ // Check RX buffer readable while ((SpiHandle.Instance->SR & SPI_SR_RXNE) == 0); int dummy = SpiHandle.Instance->DR; } }
Diff: Inits/ILI9341.cpp
- Revision:
- 21:ae0a4eedfc90
- Parent:
- 11:b842b8e332cb
diff -r 14daa48ffd4c -r ae0a4eedfc90 Inits/ILI9341.cpp --- a/Inits/ILI9341.cpp Mon Mar 23 14:08:04 2015 +0000 +++ b/Inits/ILI9341.cpp Tue Mar 31 21:14:48 2015 +0000 @@ -29,6 +29,19 @@ FastWindow(true); // most but not all controllers support this, even if datasheet tells they should. locate(0,0); } +ILI9341::ILI9341(proto_t displayproto, PinName* buspins, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD, const char *name, unsigned int LCDSIZE_X, unsigned int LCDSIZE_Y) + : TFT(displayproto, buspins, CS, reset, DC, WR, RD, LCDSIZE_X, LCDSIZE_Y, name) +{ + hw_reset(); + BusEnable(true); + identify(); // will collect tftID and set mipistd flag + init(); + auto_gram_read_format(); + set_orientation(0); + cls(); + FastWindow(true); // most but not all controllers support this, even if datasheet tells they should. + locate(0,0); +} ILI9341::ILI9341(proto_t displayproto, int Hz, PinName mosi, PinName miso, PinName sclk, PinName CS, PinName reset, PinName DC, const char *name, unsigned int LCDSIZE_X , unsigned int LCDSIZE_Y) : TFT(displayproto, Hz, mosi, miso, sclk, CS, reset, DC, LCDSIZE_X, LCDSIZE_Y, name) {