The HID Scope comes in handy for debugging purposes. You can easily specify which values you want to monitor, whether it are Analog inputs, filtering floats or boolean states.

This step by step instruction will guide you through the process and it will be easy to adjust this setup to your needs.

Using the HIDScope on your MBED¶

If there is no project you currently working on, create one first. Now simply import the HIDScope library into your project by clicking on 'Import Library' on the homepage of this library.

Include the HIDScope library in your header

#include "HIDScope.h"

And define the HIDScope beneath your #include-s, outside of any function. The only parameter that it takes is the number of channels you would like to use. In this case we will use one channel.

HIDScope    scope(1);

Now set the data and send it over USB! This example reads and sends at 100hz the value of the analog in.

#include "mbed.h"
#include "HIDScope.h"

// Define the HIDScope and Ticker object
HIDScope    scope(1);
Ticker      scopeTimer;

// Read the analog input
AnalogIn    a0(p2);

// The data read and send function
void scopeSend()
{
    scope.set(0,a0.read());
    scope.send();
}

int main()
{
    // Attach the data read and send function at 100 Hz
    scopeTimer.attach_us(&scopeSend, 1e4);   
    
    while(1) { }
}

If you have a control-loop running at 10kHz you certainly wouldn't want to transfer the data at 10kHz (that isn't even possible using this device). You could SET the data in the 10kHz loop and SEND the data in a 50hz loop. See the following example using 2 channels:

#include "mbed.h"
#include "HIDScope.h"

// Define the HIDScope and Ticker objects
HIDScope    scope(2);
Ticker      scopeTimer;
Ticker      controllerTimer;

// Two analog inputs to read from
AnalogIn    a0(p2);
AnalogIn    a1(p3);

void controlAndMeasure()
{
    // Do some control at 10 kHz
    // Store values in the scope
    scope.set(0,a0.read());
    scope.set(1,a1.read());
}

int main()
{
    // Attach the ##HIDScope::send## method from the ## scope ## object to the timer at 50Hz
    scopeTimer.attach_us(&scope, &HIDScope::send, 2e4); 

    // Attach the ## controlAndMeasure ## method to the controller timer at 1kHz
    controllerTimer.attach_us(&controlAndMeasure, 1e3);
    
    while(1) { }
        
}

Upload it and you are ready to go!

Using the HID Scope software¶

The software is written in Python and currently compatible with Windows. A deprecated NodeJS version exists that is compatible with OSX and Unix but it is not supported anymore.

Quick Start¶

• Download the precompiled application
• Extract the ZIP-archive
• Run hidscope-server.exe
• Open the scope in your browser (http://localhost:18082/)

Alternative: Run from source¶

Alternatively the program can be run from source - Download Python 2.7 - Clone the repo - Run python server.py