mbed library sources
Fork of mbed-src by
Diff: targets/cmsis/TARGET_STM/TARGET_DISCO_F051R8/stm32f0xx_usart.h
- Revision:
- 130:1dec54e4aec3
diff -r 0182c99221bc -r 1dec54e4aec3 targets/cmsis/TARGET_STM/TARGET_DISCO_F051R8/stm32f0xx_usart.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/cmsis/TARGET_STM/TARGET_DISCO_F051R8/stm32f0xx_usart.h Fri Mar 21 11:45:09 2014 +0000 @@ -0,0 +1,609 @@ +/** + ****************************************************************************** + * @file stm32f0xx_usart.h + * @author MCD Application Team + * @version V1.3.0 + * @date 16-January-2014 + * @brief This file contains all the functions prototypes for the USART + * firmware library. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0XX_USART_H +#define __STM32F0XX_USART_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx.h" + +/** @addtogroup STM32F0xx_StdPeriph_Driver + * @{ + */ + +/** @addtogroup USART + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ + + + +/** + * @brief USART Init Structure definition + */ + +typedef struct +{ + uint32_t USART_BaudRate; /*!< This member configures the USART communication baud rate. + The baud rate is computed using the following formula: + - IntegerDivider = ((PCLKx) / (16 * (USART_InitStruct->USART_BaudRate))) + - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 16) + 0.5 */ + + uint32_t USART_WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref USART_Word_Length */ + + uint32_t USART_StopBits; /*!< Specifies the number of stop bits transmitted. + This parameter can be a value of @ref USART_Stop_Bits */ + + uint32_t USART_Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref USART_Parity + @note When parity is enabled, the computed parity is inserted + at the MSB position of the transmitted data (9th bit when + the word length is set to 9 data bits; 8th bit when the + word length is set to 8 data bits). */ + + uint32_t USART_Mode; /*!< Specifies wether the Receive or Transmit mode is enabled or disabled. + This parameter can be a value of @ref USART_Mode */ + + uint32_t USART_HardwareFlowControl; /*!< Specifies wether the hardware flow control mode is enabled + or disabled. + This parameter can be a value of @ref USART_Hardware_Flow_Control*/ +} USART_InitTypeDef; + +/** + * @brief USART Clock Init Structure definition + */ + +typedef struct +{ + uint32_t USART_Clock; /*!< Specifies whether the USART clock is enabled or disabled. + This parameter can be a value of @ref USART_Clock */ + + uint32_t USART_CPOL; /*!< Specifies the steady state of the serial clock. + This parameter can be a value of @ref USART_Clock_Polarity */ + + uint32_t USART_CPHA; /*!< Specifies the clock transition on which the bit capture is made. + This parameter can be a value of @ref USART_Clock_Phase */ + + uint32_t USART_LastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted + data bit (MSB) has to be output on the SCLK pin in synchronous mode. + This parameter can be a value of @ref USART_Last_Bit */ +} USART_ClockInitTypeDef; + +/* Exported constants --------------------------------------------------------*/ + +/** @defgroup USART_Exported_Constants + * @{ + */ + +#define IS_USART_ALL_PERIPH(PERIPH) (((PERIPH) == USART1) || \ + ((PERIPH) == USART2) || \ + ((PERIPH) == USART3) || \ + ((PERIPH) == USART4)) + +#define IS_USART_12_PERIPH(PERIPH) (((PERIPH) == USART1) || \ + ((PERIPH) == USART2)) + +/** @defgroup USART_Word_Length + * @{ + */ + +#define USART_WordLength_8b ((uint32_t)0x00000000) +#define USART_WordLength_9b USART_CR1_M /* should be ((uint32_t)0x00001000) */ +#define USART_WordLength_7b ((uint32_t)0x10001000) /*!< only available for STM32F072 and STM32F030 devices */ +#define IS_USART_WORD_LENGTH(LENGTH) (((LENGTH) == USART_WordLength_8b) || \ + ((LENGTH) == USART_WordLength_9b) || \ + ((LENGTH) == USART_WordLength_7b)) +/** + * @} + */ + +/** @defgroup USART_Stop_Bits + * @{ + */ + +#define USART_StopBits_1 ((uint32_t)0x00000000) +#define USART_StopBits_2 USART_CR2_STOP_1 +#define USART_StopBits_1_5 (USART_CR2_STOP_0 | USART_CR2_STOP_1) +#define IS_USART_STOPBITS(STOPBITS) (((STOPBITS) == USART_StopBits_1) || \ + ((STOPBITS) == USART_StopBits_2) || \ + ((STOPBITS) == USART_StopBits_1_5)) +/** + * @} + */ + +/** @defgroup USART_Parity + * @{ + */ + +#define USART_Parity_No ((uint32_t)0x00000000) +#define USART_Parity_Even USART_CR1_PCE +#define USART_Parity_Odd (USART_CR1_PCE | USART_CR1_PS) +#define IS_USART_PARITY(PARITY) (((PARITY) == USART_Parity_No) || \ + ((PARITY) == USART_Parity_Even) || \ + ((PARITY) == USART_Parity_Odd)) +/** + * @} + */ + +/** @defgroup USART_Mode + * @{ + */ + +#define USART_Mode_Rx USART_CR1_RE +#define USART_Mode_Tx USART_CR1_TE +#define IS_USART_MODE(MODE) ((((MODE) & (uint32_t)0xFFFFFFF3) == 0x00) && \ + ((MODE) != (uint32_t)0x00)) +/** + * @} + */ + +/** @defgroup USART_Hardware_Flow_Control + * @{ + */ + +#define USART_HardwareFlowControl_None ((uint32_t)0x00000000) +#define USART_HardwareFlowControl_RTS USART_CR3_RTSE +#define USART_HardwareFlowControl_CTS USART_CR3_CTSE +#define USART_HardwareFlowControl_RTS_CTS (USART_CR3_RTSE | USART_CR3_CTSE) +#define IS_USART_HARDWARE_FLOW_CONTROL(CONTROL)\ + (((CONTROL) == USART_HardwareFlowControl_None) || \ + ((CONTROL) == USART_HardwareFlowControl_RTS) || \ + ((CONTROL) == USART_HardwareFlowControl_CTS) || \ + ((CONTROL) == USART_HardwareFlowControl_RTS_CTS)) +/** + * @} + */ + +/** @defgroup USART_Clock + * @{ + */ + +#define USART_Clock_Disable ((uint32_t)0x00000000) +#define USART_Clock_Enable USART_CR2_CLKEN +#define IS_USART_CLOCK(CLOCK) (((CLOCK) == USART_Clock_Disable) || \ + ((CLOCK) == USART_Clock_Enable)) +/** + * @} + */ + +/** @defgroup USART_Clock_Polarity + * @{ + */ + +#define USART_CPOL_Low ((uint32_t)0x00000000) +#define USART_CPOL_High USART_CR2_CPOL +#define IS_USART_CPOL(CPOL) (((CPOL) == USART_CPOL_Low) || ((CPOL) == USART_CPOL_High)) + +/** + * @} + */ + +/** @defgroup USART_Clock_Phase + * @{ + */ + +#define USART_CPHA_1Edge ((uint32_t)0x00000000) +#define USART_CPHA_2Edge USART_CR2_CPHA +#define IS_USART_CPHA(CPHA) (((CPHA) == USART_CPHA_1Edge) || ((CPHA) == USART_CPHA_2Edge)) + +/** + * @} + */ + +/** @defgroup USART_Last_Bit + * @{ + */ + +#define USART_LastBit_Disable ((uint32_t)0x00000000) +#define USART_LastBit_Enable USART_CR2_LBCL +#define IS_USART_LASTBIT(LASTBIT) (((LASTBIT) == USART_LastBit_Disable) || \ + ((LASTBIT) == USART_LastBit_Enable)) +/** + * @} + */ + +/** @defgroup USART_DMA_Requests + * @{ + */ + +#define USART_DMAReq_Tx USART_CR3_DMAT +#define USART_DMAReq_Rx USART_CR3_DMAR +#define IS_USART_DMAREQ(DMAREQ) ((((DMAREQ) & (uint32_t)0xFFFFFF3F) == 0x00) && \ + ((DMAREQ) != (uint32_t)0x00)) + +/** + * @} + */ + +/** @defgroup USART_DMA_Recception_Error + * @{ + */ + +#define USART_DMAOnError_Enable ((uint32_t)0x00000000) +#define USART_DMAOnError_Disable USART_CR3_DDRE +#define IS_USART_DMAONERROR(DMAERROR) (((DMAERROR) == USART_DMAOnError_Disable)|| \ + ((DMAERROR) == USART_DMAOnError_Enable)) +/** + * @} + */ + +/** @defgroup USART_MuteMode_WakeUp_methods + * @{ + */ + +#define USART_WakeUp_IdleLine ((uint32_t)0x00000000) +#define USART_WakeUp_AddressMark USART_CR1_WAKE +#define IS_USART_MUTEMODE_WAKEUP(WAKEUP) (((WAKEUP) == USART_WakeUp_IdleLine) || \ + ((WAKEUP) == USART_WakeUp_AddressMark)) +/** + * @} + */ + +/** @defgroup USART_Address_Detection + * @{ + */ + +#define USART_AddressLength_4b ((uint32_t)0x00000000) +#define USART_AddressLength_7b USART_CR2_ADDM7 +#define IS_USART_ADDRESS_DETECTION(ADDRESS) (((ADDRESS) == USART_AddressLength_4b) || \ + ((ADDRESS) == USART_AddressLength_7b)) +/** + * @} + */ + +/** @defgroup USART_StopMode_WakeUp_methods + * @note These parameters are only available for STM32F051 and STM32F072 devices + * @{ + */ + +#define USART_WakeUpSource_AddressMatch ((uint32_t)0x00000000) +#define USART_WakeUpSource_StartBit USART_CR3_WUS_1 +#define USART_WakeUpSource_RXNE (USART_CR3_WUS_0 | USART_CR3_WUS_1) +#define IS_USART_STOPMODE_WAKEUPSOURCE(SOURCE) (((SOURCE) == USART_WakeUpSource_AddressMatch) || \ + ((SOURCE) == USART_WakeUpSource_StartBit) || \ + ((SOURCE) == USART_WakeUpSource_RXNE)) +/** + * @} + */ + +/** @defgroup USART_LIN_Break_Detection_Length + * @{ + */ + +#define USART_LINBreakDetectLength_10b ((uint32_t)0x00000000) +#define USART_LINBreakDetectLength_11b USART_CR2_LBDL +#define IS_USART_LIN_BREAK_DETECT_LENGTH(LENGTH) \ + (((LENGTH) == USART_LINBreakDetectLength_10b) || \ + ((LENGTH) == USART_LINBreakDetectLength_11b)) +/** + * @} + */ + +/** @defgroup USART_IrDA_Low_Power + * @{ + */ + +#define USART_IrDAMode_LowPower USART_CR3_IRLP +#define USART_IrDAMode_Normal ((uint32_t)0x00000000) +#define IS_USART_IRDA_MODE(MODE) (((MODE) == USART_IrDAMode_LowPower) || \ + ((MODE) == USART_IrDAMode_Normal)) +/** + * @} + */ + +/** @defgroup USART_DE_Polarity + * @{ + */ + +#define USART_DEPolarity_High ((uint32_t)0x00000000) +#define USART_DEPolarity_Low USART_CR3_DEP +#define IS_USART_DE_POLARITY(POLARITY) (((POLARITY) == USART_DEPolarity_Low) || \ + ((POLARITY) == USART_DEPolarity_High)) +/** + * @} + */ + +/** @defgroup USART_Inversion_Pins + * @{ + */ + +#define USART_InvPin_Tx USART_CR2_TXINV +#define USART_InvPin_Rx USART_CR2_RXINV +#define IS_USART_INVERSTION_PIN(PIN) ((((PIN) & (uint32_t)0xFFFCFFFF) == 0x00) && \ + ((PIN) != (uint32_t)0x00)) + +/** + * @} + */ + +/** @defgroup USART_AutoBaudRate_Mode + * @{ + */ + +#define USART_AutoBaudRate_StartBit ((uint32_t)0x00000000) +#define USART_AutoBaudRate_FallingEdge USART_CR2_ABRMODE_0 +#define IS_USART_AUTOBAUDRATE_MODE(MODE) (((MODE) == USART_AutoBaudRate_StartBit) || \ + ((MODE) == USART_AutoBaudRate_FallingEdge)) +/** + * @} + */ + +/** @defgroup USART_OVR_DETECTION + * @{ + */ + +#define USART_OVRDetection_Enable ((uint32_t)0x00000000) +#define USART_OVRDetection_Disable USART_CR3_OVRDIS +#define IS_USART_OVRDETECTION(OVR) (((OVR) == USART_OVRDetection_Enable)|| \ + ((OVR) == USART_OVRDetection_Disable)) +/** + * @} + */ +/** @defgroup USART_Request + * @{ + */ + +#define USART_Request_ABRRQ USART_RQR_ABRRQ +#define USART_Request_SBKRQ USART_RQR_SBKRQ +#define USART_Request_MMRQ USART_RQR_MMRQ +#define USART_Request_RXFRQ USART_RQR_RXFRQ +#define USART_Request_TXFRQ USART_RQR_TXFRQ + +#define IS_USART_REQUEST(REQUEST) (((REQUEST) == USART_Request_TXFRQ) || \ + ((REQUEST) == USART_Request_RXFRQ) || \ + ((REQUEST) == USART_Request_MMRQ) || \ + ((REQUEST) == USART_Request_SBKRQ) || \ + ((REQUEST) == USART_Request_ABRRQ)) +/** + * @} + */ + +/** @defgroup USART_Flags + * @{ + */ +#define USART_FLAG_REACK USART_ISR_REACK +#define USART_FLAG_TEACK USART_ISR_TEACK +#define USART_FLAG_WU USART_ISR_WUF /*!< Not available for STM32F030 devices */ +#define USART_FLAG_RWU USART_ISR_RWU /*!< Not available for STM32F030 devices */ +#define USART_FLAG_SBK USART_ISR_SBKF +#define USART_FLAG_CM USART_ISR_CMF +#define USART_FLAG_BUSY USART_ISR_BUSY +#define USART_FLAG_ABRF USART_ISR_ABRF +#define USART_FLAG_ABRE USART_ISR_ABRE +#define USART_FLAG_EOB USART_ISR_EOBF /*!< Not available for STM32F030 devices */ +#define USART_FLAG_RTO USART_ISR_RTOF +#define USART_FLAG_nCTSS USART_ISR_CTS +#define USART_FLAG_CTS USART_ISR_CTSIF +#define USART_FLAG_LBD USART_ISR_LBD /*!< Not available for STM32F030 devices */ +#define USART_FLAG_TXE USART_ISR_TXE +#define USART_FLAG_TC USART_ISR_TC +#define USART_FLAG_RXNE USART_ISR_RXNE +#define USART_FLAG_IDLE USART_ISR_IDLE +#define USART_FLAG_ORE USART_ISR_ORE +#define USART_FLAG_NE USART_ISR_NE +#define USART_FLAG_FE USART_ISR_FE +#define USART_FLAG_PE USART_ISR_PE +#define IS_USART_FLAG(FLAG) (((FLAG) == USART_FLAG_PE) || ((FLAG) == USART_FLAG_TXE) || \ + ((FLAG) == USART_FLAG_TC) || ((FLAG) == USART_FLAG_RXNE) || \ + ((FLAG) == USART_FLAG_IDLE) || ((FLAG) == USART_FLAG_LBD) || \ + ((FLAG) == USART_FLAG_CTS) || ((FLAG) == USART_FLAG_ORE) || \ + ((FLAG) == USART_FLAG_NE) || ((FLAG) == USART_FLAG_FE) || \ + ((FLAG) == USART_FLAG_nCTSS) || ((FLAG) == USART_FLAG_RTO) || \ + ((FLAG) == USART_FLAG_EOB) || ((FLAG) == USART_FLAG_ABRE) || \ + ((FLAG) == USART_FLAG_ABRF) || ((FLAG) == USART_FLAG_BUSY) || \ + ((FLAG) == USART_FLAG_CM) || ((FLAG) == USART_FLAG_SBK) || \ + ((FLAG) == USART_FLAG_RWU) || ((FLAG) == USART_FLAG_WU) || \ + ((FLAG) == USART_FLAG_TEACK)|| ((FLAG) == USART_FLAG_REACK)) + +#define IS_USART_CLEAR_FLAG(FLAG) (((FLAG) == USART_FLAG_WU) || ((FLAG) == USART_FLAG_TC) || \ + ((FLAG) == USART_FLAG_IDLE) || ((FLAG) == USART_FLAG_ORE) || \ + ((FLAG) == USART_FLAG_NE) || ((FLAG) == USART_FLAG_FE) || \ + ((FLAG) == USART_FLAG_LBD) || ((FLAG) == USART_FLAG_CTS) || \ + ((FLAG) == USART_FLAG_RTO) || ((FLAG) == USART_FLAG_EOB) || \ + ((FLAG) == USART_FLAG_CM) || ((FLAG) == USART_FLAG_PE)) +/** + * @} + */ + +/** @defgroup USART_Interrupt_definition + * @brief USART Interrupt definition + * USART_IT possible values + * Elements values convention: 0xZZZZYYXX + * XX: Position of the corresponding Interrupt + * YY: Register index + * ZZZZ: Flag position + * @{ + */ + +#define USART_IT_WU ((uint32_t)0x00140316) /*!< Not available for STM32F030 devices */ +#define USART_IT_CM ((uint32_t)0x0011010E) +#define USART_IT_EOB ((uint32_t)0x000C011B) /*!< Not available for STM32F030 devices */ +#define USART_IT_RTO ((uint32_t)0x000B011A) +#define USART_IT_PE ((uint32_t)0x00000108) +#define USART_IT_TXE ((uint32_t)0x00070107) +#define USART_IT_TC ((uint32_t)0x00060106) +#define USART_IT_RXNE ((uint32_t)0x00050105) +#define USART_IT_IDLE ((uint32_t)0x00040104) +#define USART_IT_LBD ((uint32_t)0x00080206) /*!< Not available for STM32F030 devices */ +#define USART_IT_CTS ((uint32_t)0x0009030A) +#define USART_IT_ERR ((uint32_t)0x00000300) +#define USART_IT_ORE ((uint32_t)0x00030300) +#define USART_IT_NE ((uint32_t)0x00020300) +#define USART_IT_FE ((uint32_t)0x00010300) + +#define IS_USART_CONFIG_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \ + ((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \ + ((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \ + ((IT) == USART_IT_CTS) || ((IT) == USART_IT_ERR) || \ + ((IT) == USART_IT_RTO) || ((IT) == USART_IT_EOB) || \ + ((IT) == USART_IT_CM) || ((IT) == USART_IT_WU)) + +#define IS_USART_GET_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \ + ((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \ + ((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \ + ((IT) == USART_IT_CTS) || ((IT) == USART_IT_ORE) || \ + ((IT) == USART_IT_NE) || ((IT) == USART_IT_FE) || \ + ((IT) == USART_IT_RTO) || ((IT) == USART_IT_EOB) || \ + ((IT) == USART_IT_CM) || ((IT) == USART_IT_WU)) + +#define IS_USART_CLEAR_IT(IT) (((IT) == USART_IT_TC) || ((IT) == USART_IT_PE) || \ + ((IT) == USART_IT_FE) || ((IT) == USART_IT_NE) || \ + ((IT) == USART_IT_ORE) || ((IT) == USART_IT_IDLE) || \ + ((IT) == USART_IT_LBD) || ((IT) == USART_IT_CTS) || \ + ((IT) == USART_IT_RTO) || ((IT) == USART_IT_EOB) || \ + ((IT) == USART_IT_CM) || ((IT) == USART_IT_WU)) +/** + * @} + */ + +/** @defgroup USART_Global_definition + * @{ + */ + +#define IS_USART_BAUDRATE(BAUDRATE) (((BAUDRATE) > 0) && ((BAUDRATE) < 0x005B8D81)) +#define IS_USART_DE_ASSERTION_DEASSERTION_TIME(TIME) ((TIME) <= 0x1F) +#define IS_USART_AUTO_RETRY_COUNTER(COUNTER) ((COUNTER) <= 0x7) +#define IS_USART_TIMEOUT(TIMEOUT) ((TIMEOUT) <= 0x00FFFFFF) +#define IS_USART_DATA(DATA) ((DATA) <= 0x1FF) + +/** + * @} + */ + +/** + * @} + */ + +/* Exported macro ------------------------------------------------------------*/ +/* Exported functions ------------------------------------------------------- */ + +/* Initialization and Configuration functions *********************************/ +void USART_DeInit(USART_TypeDef* USARTx); +void USART_Init(USART_TypeDef* USARTx, USART_InitTypeDef* USART_InitStruct); +void USART_StructInit(USART_InitTypeDef* USART_InitStruct); +void USART_ClockInit(USART_TypeDef* USARTx, USART_ClockInitTypeDef* USART_ClockInitStruct); +void USART_ClockStructInit(USART_ClockInitTypeDef* USART_ClockInitStruct); +void USART_Cmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_DirectionModeCmd(USART_TypeDef* USARTx, uint32_t USART_DirectionMode, FunctionalState NewState); +void USART_SetPrescaler(USART_TypeDef* USARTx, uint8_t USART_Prescaler); /* Not available for STM32F030 devices */ +void USART_OverSampling8Cmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_OneBitMethodCmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_MSBFirstCmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_DataInvCmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_InvPinCmd(USART_TypeDef* USARTx, uint32_t USART_InvPin, FunctionalState NewState); +void USART_SWAPPinCmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_ReceiverTimeOutCmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_SetReceiverTimeOut(USART_TypeDef* USARTx, uint32_t USART_ReceiverTimeOut); + +/* STOP Mode functions ********************************************************/ +void USART_STOPModeCmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_StopModeWakeUpSourceConfig(USART_TypeDef* USARTx, uint32_t USART_WakeUpSource); /* Not available for STM32F030 devices */ + +/* AutoBaudRate functions *****************************************************/ +void USART_AutoBaudRateCmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_AutoBaudRateConfig(USART_TypeDef* USARTx, uint32_t USART_AutoBaudRate); + +/* Data transfers functions ***************************************************/ +void USART_SendData(USART_TypeDef* USARTx, uint16_t Data); +uint16_t USART_ReceiveData(USART_TypeDef* USARTx); + +/* Multi-Processor Communication functions ************************************/ +void USART_SetAddress(USART_TypeDef* USARTx, uint8_t USART_Address); +void USART_MuteModeWakeUpConfig(USART_TypeDef* USARTx, uint32_t USART_WakeUp); +void USART_MuteModeCmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_AddressDetectionConfig(USART_TypeDef* USARTx, uint32_t USART_AddressLength); + +/* LIN mode functions *********************************************************/ +void USART_LINBreakDetectLengthConfig(USART_TypeDef* USARTx, uint32_t USART_LINBreakDetectLength); /* Not available for STM32F030 devices */ +void USART_LINCmd(USART_TypeDef* USARTx, FunctionalState NewState); /* Not available for STM32F030 devices */ + +/* Half-duplex mode function **************************************************/ +void USART_HalfDuplexCmd(USART_TypeDef* USARTx, FunctionalState NewState); + +/* Smartcard mode functions ***************************************************/ +void USART_SmartCardCmd(USART_TypeDef* USARTx, FunctionalState NewState); /* Not available for STM32F030 devices */ +void USART_SmartCardNACKCmd(USART_TypeDef* USARTx, FunctionalState NewState); /* Not available for STM32F030 devices */ +void USART_SetGuardTime(USART_TypeDef* USARTx, uint8_t USART_GuardTime); /* Not available for STM32F030 devices */ +void USART_SetAutoRetryCount(USART_TypeDef* USARTx, uint8_t USART_AutoCount); /* Not available for STM32F030 devices */ +void USART_SetBlockLength(USART_TypeDef* USARTx, uint8_t USART_BlockLength); /* Not available for STM32F030 devices */ + +/* IrDA mode functions ********************************************************/ +void USART_IrDAConfig(USART_TypeDef* USARTx, uint32_t USART_IrDAMode); /* Not available for STM32F030 devices */ +void USART_IrDACmd(USART_TypeDef* USARTx, FunctionalState NewState); /* Not available for STM32F030 devices */ + +/* RS485 mode functions *******************************************************/ +void USART_DECmd(USART_TypeDef* USARTx, FunctionalState NewState); +void USART_DEPolarityConfig(USART_TypeDef* USARTx, uint32_t USART_DEPolarity); +void USART_SetDEAssertionTime(USART_TypeDef* USARTx, uint32_t USART_DEAssertionTime); +void USART_SetDEDeassertionTime(USART_TypeDef* USARTx, uint32_t USART_DEDeassertionTime); + +/* DMA transfers management functions *****************************************/ +void USART_DMACmd(USART_TypeDef* USARTx, uint32_t USART_DMAReq, FunctionalState NewState); +void USART_DMAReceptionErrorConfig(USART_TypeDef* USARTx, uint32_t USART_DMAOnError); + +/* Interrupts and flags management functions **********************************/ +void USART_ITConfig(USART_TypeDef* USARTx, uint32_t USART_IT, FunctionalState NewState); +void USART_RequestCmd(USART_TypeDef* USARTx, uint32_t USART_Request, FunctionalState NewState); +void USART_OverrunDetectionConfig(USART_TypeDef* USARTx, uint32_t USART_OVRDetection); +FlagStatus USART_GetFlagStatus(USART_TypeDef* USARTx, uint32_t USART_FLAG); +void USART_ClearFlag(USART_TypeDef* USARTx, uint32_t USART_FLAG); +ITStatus USART_GetITStatus(USART_TypeDef* USARTx, uint32_t USART_IT); +void USART_ClearITPendingBit(USART_TypeDef* USARTx, uint32_t USART_IT); + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0XX_USART_H */ + +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/