mbed library sources
Fork of mbed-src by
targets/cmsis/TARGET_STM/TARGET_NUCLEO_F334R8/stm32f3xx_hal_i2s_ex.h
- Committer:
- mbed_official
- Date:
- 2014-06-24
- Revision:
- 237:f3da66175598
File content as of revision 237:f3da66175598:
/** ****************************************************************************** * @file stm32f3xx_hal_i2s_ex.h * @author MCD Application Team * @version V1.0.1 * @date 18-June-2014 * @brief Header file of I2S HAL Extension module. ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F3xx_HAL_I2S_EX_H #define __STM32F3xx_HAL_I2S_EX_H #ifdef __cplusplus extern "C" { #endif #if defined(STM32F301x8) || \ defined(STM32F302x8) || defined(STM32F302xC) || \ defined(STM32F303xC) || defined(STM32F373xC) || \ defined(STM32F318xx) || \ defined(STM32F358xx) || defined(STM32F378xx) /* Includes ------------------------------------------------------------------*/ #include "stm32f3xx_hal_def.h" /** @addtogroup STM32F3xx_HAL_Driver * @{ */ /** @addtogroup I2SEx * @{ */ /* Exported types ------------------------------------------------------------*/ /* Exported constants --------------------------------------------------------*/ /* Exported macro ------------------------------------------------------------*/ #if defined (STM32F302xC) || defined (STM32F303xC) || defined (STM32F358xx) #define I2SxEXT(__INSTANCE__) ((__INSTANCE__) == (SPI2)? (SPI_TypeDef *)(I2S2ext_BASE): (SPI_TypeDef *)(I2S3ext_BASE)) /** @brief Enable or disable the specified I2SExt peripheral. * @param __HANDLE__: specifies the I2S Handle. * @retval None */ #define __HAL_I2SEXT_ENABLE(__HANDLE__) (I2SxEXT((__HANDLE__)->Instance)->I2SCFGR |= SPI_I2SCFGR_I2SE) #define __HAL_I2SEXT_DISABLE(__HANDLE__) (I2SxEXT((__HANDLE__)->Instance)->I2SCFGR &= ~SPI_I2SCFGR_I2SE) /** @brief Enable or disable the specified I2SExt interrupts. * @param __HANDLE__: specifies the I2S Handle. * @param __INTERRUPT__: specifies the interrupt source to enable or disable. * This parameter can be one of the following values: * @arg I2S_IT_TXE: Tx buffer empty interrupt enable * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable * @arg I2S_IT_ERR: Error interrupt enable * @retval None */ #define __HAL_I2SEXT_ENABLE_IT(__HANDLE__, __INTERRUPT__) (I2SxEXT((__HANDLE__)->Instance)->CR2 |= (__INTERRUPT__)) #define __HAL_I2SEXT_DISABLE_IT(__HANDLE__, __INTERRUPT__) (I2SxEXT((__HANDLE__)->Instance)->CR2 &= ~(__INTERRUPT__)) /** @brief Checks if the specified I2SExt interrupt source is enabled or disabled. * @param __HANDLE__: specifies the I2S Handle. * This parameter can be I2S where x: 1, 2, or 3 to select the I2S peripheral. * @param __INTERRUPT__: specifies the I2S interrupt source to check. * This parameter can be one of the following values: * @arg I2S_IT_TXE: Tx buffer empty interrupt enable * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable * @arg I2S_IT_ERR: Error interrupt enable * @retval The new state of __IT__ (TRUE or FALSE). */ #define __HAL_I2SEXT_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((I2SxEXT((__HANDLE__)->Instance)->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) /** @brief Checks whether the specified I2SExt flag is set or not. * @param __HANDLE__: specifies the I2S Handle. * @param __FLAG__: specifies the flag to check. * This parameter can be one of the following values: * @arg I2S_FLAG_RXNE: Receive buffer not empty flag * @arg I2S_FLAG_TXE: Transmit buffer empty flag * @arg I2S_FLAG_UDR: Underrun flag * @arg I2S_FLAG_OVR: Overrun flag * @arg I2S_FLAG_FRE: Frame error flag * @arg I2S_FLAG_CHSIDE: Channel Side flag * @arg I2S_FLAG_BSY: Busy flag * @retval The new state of __FLAG__ (TRUE or FALSE). */ #define __HAL_I2SEXT_GET_FLAG(__HANDLE__, __FLAG__) (((I2SxEXT((__HANDLE__)->Instance)->SR) & (__FLAG__)) == (__FLAG__)) /** @brief Clears the I2SExt OVR pending flag. * @param __HANDLE__: specifies the I2S Handle. * @retval None */ #define __HAL_I2SEXT_CLEAR_OVRFLAG(__HANDLE__) do{(I2SxEXT((__HANDLE__)->Instance)->DR;\ (I2SxEXT((__HANDLE__)->Instance)->SR;}while(0) /** @brief Clears the I2SExt UDR pending flag. * @param __HANDLE__: specifies the I2S Handle. * @retval None */ #define __HAL_I2SEXT_CLEAR_UDRFLAG(__HANDLE__)(I2SxEXT((__HANDLE__)->Instance)->SR) #endif /* STM32F302xC || STM32F303xC || STM32F358xx */ /* Exported functions --------------------------------------------------------*/ /* Initialization/de-initialization functions ********************************/ #if defined (STM32F302xC) || defined (STM32F303xC) || defined (STM32F358xx) /* Extended features functions ************************************************/ /* Blocking mode: Polling */ HAL_StatusTypeDef HAL_I2SEx_TransmitReceive(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, uint16_t Size, uint32_t Timeout); /* Non-Blocking mode: Interrupt */ HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, uint16_t Size); /* Non-Blocking mode: DMA */ HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, uint16_t Size); /* I2S IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */ void HAL_I2S_FullDuplex_IRQHandler(I2S_HandleTypeDef *hi2s); void HAL_I2S_TxRxCpltCallback(I2S_HandleTypeDef *hi2s); #endif /* STM32F302xC || STM32F303xC || STM32F358xx */ /* Peripheral Control and State functions ************************************/ HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s); HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s); HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s); /** * @} */ /** * @} */ #endif /* defined(STM32F301x8) || */ /* defined(STM32F302x8) || defined(STM32F302xC) || */ /* defined(STM32F303xC) || defined(STM32F373xC) || */ /* defined(STM32F318xx) || */ /* defined(STM32F358xx) || defined(STM32F378xx) */ #ifdef __cplusplus } #endif #endif /* __STM32F3xx_HAL_I2S_EX_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/