mbed library sources
Fork of mbed-src by
targets/cmsis/TARGET_STM/TARGET_DISCO_F303VC/stm32f30x_comp.h
- Committer:
- todotani
- Date:
- 2014-09-05
- Revision:
- 308:59cc78a25982
- Parent:
- 157:90e3acc479a2
File content as of revision 308:59cc78a25982:
/** ****************************************************************************** * @file stm32f30x_comp.h * @author MCD Application Team * @version V1.1.0 * @date 27-February-2014 * @brief This file contains all the functions prototypes for the COMP firmware * library. ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F30x_COMP_H #define __STM32F30x_COMP_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm32f30x.h" /** @addtogroup STM32F30x_StdPeriph_Driver * @{ */ /** @addtogroup COMP * @{ */ /* Exported types ------------------------------------------------------------*/ /** * @brief COMP Init structure definition */ typedef struct { uint32_t COMP_InvertingInput; /*!< Selects the inverting input of the comparator. This parameter can be a value of @ref COMP_InvertingInput */ uint32_t COMP_NonInvertingInput; /*!< Selects the non inverting input of the comparator. This parameter can be a value of @ref COMP_NonInvertingInput */ uint32_t COMP_Output; /*!< Selects the output redirection of the comparator. This parameter can be a value of @ref COMP_Output */ uint32_t COMP_BlankingSrce; /*!< Selects the output blanking source of the comparator. This parameter can be a value of @ref COMP_BlankingSrce */ uint32_t COMP_OutputPol; /*!< Selects the output polarity of the comparator. This parameter can be a value of @ref COMP_OutputPoloarity */ uint32_t COMP_Hysteresis; /*!< Selects the hysteresis voltage of the comparator. This parameter can be a value of @ref COMP_Hysteresis */ uint32_t COMP_Mode; /*!< Selects the operating mode of the comparator and allows to adjust the speed/consumption. This parameter can be a value of @ref COMP_Mode */ }COMP_InitTypeDef; /* Exported constants --------------------------------------------------------*/ /** @defgroup COMP_Exported_Constants * @{ */ /** @defgroup COMP_Selection * @{ */ #define COMP_Selection_COMP1 ((uint32_t)0x00000000) /*!< COMP1 Selection */ #define COMP_Selection_COMP2 ((uint32_t)0x00000004) /*!< COMP2 Selection */ #define COMP_Selection_COMP3 ((uint32_t)0x00000008) /*!< COMP3 Selection */ #define COMP_Selection_COMP4 ((uint32_t)0x0000000C) /*!< COMP4 Selection */ #define COMP_Selection_COMP5 ((uint32_t)0x00000010) /*!< COMP5 Selection */ #define COMP_Selection_COMP6 ((uint32_t)0x00000014) /*!< COMP6 Selection */ #define COMP_Selection_COMP7 ((uint32_t)0x00000018) /*!< COMP7 Selection */ #define IS_COMP_ALL_PERIPH(PERIPH) (((PERIPH) == COMP_Selection_COMP1) || \ ((PERIPH) == COMP_Selection_COMP2) || \ ((PERIPH) == COMP_Selection_COMP3) || \ ((PERIPH) == COMP_Selection_COMP4) || \ ((PERIPH) == COMP_Selection_COMP5) || \ ((PERIPH) == COMP_Selection_COMP6) || \ ((PERIPH) == COMP_Selection_COMP7)) /** * @} */ /** @defgroup COMP_InvertingInput * @{ */ #define COMP_InvertingInput_1_4VREFINT ((uint32_t)0x00000000) /*!< 1/4 VREFINT connected to comparator inverting input */ #define COMP_InvertingInput_1_2VREFINT COMP_CSR_COMPxINSEL_0 /*!< 1/2 VREFINT connected to comparator inverting input */ #define COMP_InvertingInput_3_4VREFINT COMP_CSR_COMPxINSEL_1 /*!< 3/4 VREFINT connected to comparator inverting input */ #define COMP_InvertingInput_VREFINT ((uint32_t)0x00000030) /*!< VREFINT connected to comparator inverting input */ #define COMP_InvertingInput_DAC1OUT1 COMP_CSR_COMPxINSEL_2 /*!< DAC1_OUT1 (PA4) connected to comparator inverting input */ #define COMP_InvertingInput_DAC1OUT2 ((uint32_t)0x00000050) /*!< DAC1_OUT2 (PA5) connected to comparator inverting input */ #define COMP_InvertingInput_IO1 ((uint32_t)0x00000060) /*!< I/O1 (PA0 for COMP1, PA2 for COMP2, PD15 for COMP3, PE8 for COMP4, PD13 for COMP5, PD10 for COMP6, PC0 for COMP7) connected to comparator inverting input */ #define COMP_InvertingInput_IO2 COMP_CSR_COMPxINSEL /*!< I/O2 (PB12 for COMP3, PB2 for COMP4, PB10 for COMP5, PB15 for COMP6) connected to comparator inverting input */ #define COMP_InvertingInput_DAC2OUT1 COMP_CSR_COMPxINSEL_3 /*!< DAC2_OUT1 (PA6) connected to comparator inverting input */ #define IS_COMP_INVERTING_INPUT(INPUT) (((INPUT) == COMP_InvertingInput_1_4VREFINT) || \ ((INPUT) == COMP_InvertingInput_1_2VREFINT) || \ ((INPUT) == COMP_InvertingInput_3_4VREFINT) || \ ((INPUT) == COMP_InvertingInput_VREFINT) || \ ((INPUT) == COMP_InvertingInput_DAC1OUT1) || \ ((INPUT) == COMP_InvertingInput_DAC1OUT2) || \ ((INPUT) == COMP_InvertingInput_IO1) || \ ((INPUT) == COMP_InvertingInput_IO2) || \ ((INPUT) == COMP_InvertingInput_DAC2OUT1)) /** * @} */ /** @defgroup COMP_NonInvertingInput * @{ */ #define COMP_NonInvertingInput_IO1 ((uint32_t)0x00000000) /*!< I/O1 (PA1 for COMP1, PA7 for COMP2, PB14 for COMP3, PB0 for COMP4, PD12 for COMP5, PD11 for COMP6, PA0 for COMP7) connected to comparator non inverting input */ #define COMP_NonInvertingInput_IO2 COMP_CSR_COMPxNONINSEL /*!< I/O2 (PA3 for COMP2, PD14 for COMP3, PE7 for COMP4, PB13 for COMP5, PB11 for COMP6, PC1 for COMP7) connected to comparator non inverting input */ #define IS_COMP_NONINVERTING_INPUT(INPUT) (((INPUT) == COMP_NonInvertingInput_IO1) || \ ((INPUT) == COMP_NonInvertingInput_IO2)) /** * @} */ /** @defgroup COMP_Output * @{ */ #define COMP_Output_None ((uint32_t)0x00000000) /*!< COMP output isn't connected to other peripherals */ /* Output Redirection common for all comparators COMP1...COMP7 */ #define COMP_Output_TIM1BKIN COMP_CSR_COMPxOUTSEL_0 /*!< COMP output connected to TIM1 Break Input (BKIN) */ #define COMP_Output_TIM1BKIN2 ((uint32_t)0x00000800) /*!< COMP output connected to TIM1 Break Input 2 (BKIN2) */ #define COMP_Output_TIM8BKIN ((uint32_t)0x00000C00) /*!< COMP output connected to TIM8 Break Input (BKIN) */ #define COMP_Output_TIM8BKIN2 ((uint32_t)0x00001000) /*!< COMP output connected to TIM8 Break Input 2 (BKIN2) */ #define COMP_Output_TIM1BKIN2_TIM8BKIN2 ((uint32_t)0x00001400) /*!< COMP output connected to TIM1 Break Input 2 and TIM8 Break Input 2 */ /* Output Redirection common for COMP1 and COMP2 */ #define COMP_Output_TIM1OCREFCLR ((uint32_t)0x00001800) /*!< COMP output connected to TIM1 OCREF Clear */ #define COMP_Output_TIM1IC1 ((uint32_t)0x00001C00) /*!< COMP output connected to TIM1 Input Capture 1 */ #define COMP_Output_TIM2IC4 ((uint32_t)0x00002000) /*!< COMP output connected to TIM2 Input Capture 4 */ #define COMP_Output_TIM2OCREFCLR ((uint32_t)0x00002400) /*!< COMP output connected to TIM2 OCREF Clear */ #define COMP_Output_TIM3IC1 ((uint32_t)0x00002800) /*!< COMP output connected to TIM3 Input Capture 1 */ #define COMP_Output_TIM3OCREFCLR ((uint32_t)0x00002C00) /*!< COMP output connected to TIM3 OCREF Clear */ /* Output Redirection specific to COMP2 */ #define COMP_Output_HRTIM1_FLT6 ((uint32_t)0x00003000) /*!< COMP output connected to HRTIM1 FLT6 */ #define COMP_Output_HRTIM1_EE1_2 ((uint32_t)0x00003400) /*!< COMP output connected to HRTIM1 EE1_2*/ #define COMP_Output_HRTIM1_EE6_2 ((uint32_t)0x00003800) /*!< COMP output connected to HRTIM1 EE6_2 */ /* Output Redirection specific to COMP3 */ #define COMP_Output_TIM4IC1 ((uint32_t)0x00001C00) /*!< COMP output connected to TIM4 Input Capture 1 */ #define COMP_Output_TIM3IC2 ((uint32_t)0x00002000) /*!< COMP output connected to TIM3 Input Capture 2 */ #define COMP_Output_TIM15IC1 ((uint32_t)0x00002800) /*!< COMP output connected to TIM15 Input Capture 1 */ #define COMP_Output_TIM15BKIN ((uint32_t)0x00002C00) /*!< COMP output connected to TIM15 Break Input (BKIN) */ /* Output Redirection specific to COMP4 */ #define COMP_Output_TIM3IC3 ((uint32_t)0x00001800) /*!< COMP output connected to TIM3 Input Capture 3 */ #define COMP_Output_TIM8OCREFCLR ((uint32_t)0x00001C00) /*!< COMP output connected to TIM8 OCREF Clear */ #define COMP_Output_TIM15IC2 ((uint32_t)0x00002000) /*!< COMP output connected to TIM15 Input Capture 2 */ #define COMP_Output_TIM4IC2 ((uint32_t)0x00002400) /*!< COMP output connected to TIM4 Input Capture 2 */ #define COMP_Output_TIM15OCREFCLR ((uint32_t)0x00002800) /*!< COMP output connected to TIM15 OCREF Clear */ #define COMP_Output_HRTIM1_FLT7 ((uint32_t)0x00003000) /*!< COMP output connected to HRTIM1 FLT7 */ #define COMP_Output_HRTIM1_EE2_2 ((uint32_t)0x00003400) /*!< COMP output connected to HRTIM1 EE2_2*/ #define COMP_Output_HRTIM1_EE7_2 ((uint32_t)0x00003800) /*!< COMP output connected to HRTIM1 EE7_2 */ /* Output Redirection specific to COMP5 */ #define COMP_Output_TIM2IC1 ((uint32_t)0x00001800) /*!< COMP output connected to TIM2 Input Capture 1 */ #define COMP_Output_TIM17IC1 ((uint32_t)0x00002000) /*!< COMP output connected to TIM17 Input Capture 1 */ #define COMP_Output_TIM4IC3 ((uint32_t)0x00002400) /*!< COMP output connected to TIM4 Input Capture 3 */ #define COMP_Output_TIM16BKIN ((uint32_t)0x00002800) /*!< COMP output connected to TIM16 Break Input (BKIN) */ /* Output Redirection specific to COMP6 */ #define COMP_Output_TIM2IC2 ((uint32_t)0x00001800) /*!< COMP output connected to TIM2 Input Capture 2 */ #define COMP_Output_COMP6TIM2OCREFCLR ((uint32_t)0x00002000) /*!< COMP output connected to TIM2 OCREF Clear */ #define COMP_Output_TIM16OCREFCLR ((uint32_t)0x00002400) /*!< COMP output connected to TIM16 OCREF Clear */ #define COMP_Output_TIM16IC1 ((uint32_t)0x00002800) /*!< COMP output connected to TIM16 Input Capture 1 */ #define COMP_Output_TIM4IC4 ((uint32_t)0x00002C00) /*!< COMP output connected to TIM4 Input Capture 4 */ #define COMP_Output_HRTIM1_FLT8 ((uint32_t)0x00003000) /*!< COMP output connected to HRTIM1 FLT8 */ #define COMP_Output_HRTIM1_EE3_2 ((uint32_t)0x00003400) /*!< COMP output connected to HRTIM1 EE3_2*/ #define COMP_Output_HRTIM1_EE8_2 ((uint32_t)0x00003800) /*!< COMP output connected to HRTIM1 EE8_2 */ /* Output Redirection specific to COMP7 */ #define COMP_Output_TIM2IC3 ((uint32_t)0x00002000) /*!< COMP output connected to TIM2 Input Capture 3 */ #define COMP_Output_TIM1IC2 ((uint32_t)0x00002400) /*!< COMP output connected to TIM1 Input Capture 2 */ #define COMP_Output_TIM17OCREFCLR ((uint32_t)0x00002800) /*!< COMP output connected to TIM16 OCREF Clear */ #define COMP_Output_TIM17BKIN ((uint32_t)0x00002C00) /*!< COMP output connected to TIM16 Break Input (BKIN) */ #define IS_COMP_OUTPUT(OUTPUT) (((OUTPUT) == COMP_Output_None) || \ ((OUTPUT) == COMP_Output_TIM1BKIN) || \ ((OUTPUT) == COMP_Output_TIM1IC1) || \ ((OUTPUT) == COMP_Output_TIM1OCREFCLR) || \ ((OUTPUT) == COMP_Output_TIM2IC4) || \ ((OUTPUT) == COMP_Output_TIM2OCREFCLR) || \ ((OUTPUT) == COMP_Output_COMP6TIM2OCREFCLR) || \ ((OUTPUT) == COMP_Output_TIM3IC1) || \ ((OUTPUT) == COMP_Output_TIM3OCREFCLR) || \ ((OUTPUT) == COMP_Output_TIM8BKIN) || \ ((OUTPUT) == COMP_Output_TIM1BKIN2) || \ ((OUTPUT) == COMP_Output_TIM8BKIN2) || \ ((OUTPUT) == COMP_Output_TIM2OCREFCLR) || \ ((OUTPUT) == COMP_Output_TIM1BKIN2_TIM8BKIN2) || \ ((OUTPUT) == COMP_Output_TIM3IC2) || \ ((OUTPUT) == COMP_Output_TIM4IC1) || \ ((OUTPUT) == COMP_Output_TIM15IC1) || \ ((OUTPUT) == COMP_Output_TIM15BKIN) || \ ((OUTPUT) == COMP_Output_TIM8OCREFCLR) || \ ((OUTPUT) == COMP_Output_TIM3IC3) || \ ((OUTPUT) == COMP_Output_TIM4IC1) || \ ((OUTPUT) == COMP_Output_TIM15IC1) || \ ((OUTPUT) == COMP_Output_TIM2IC1) || \ ((OUTPUT) == COMP_Output_TIM4IC3) || \ ((OUTPUT) == COMP_Output_TIM16BKIN) || \ ((OUTPUT) == COMP_Output_TIM17IC1) || \ ((OUTPUT) == COMP_Output_TIM2IC2) || \ ((OUTPUT) == COMP_Output_TIM16IC1) || \ ((OUTPUT) == COMP_Output_TIM4IC4) || \ ((OUTPUT) == COMP_Output_TIM16OCREFCLR) || \ ((OUTPUT) == COMP_Output_TIM2IC3) || \ ((OUTPUT) == COMP_Output_TIM1IC2) || \ ((OUTPUT) == COMP_Output_TIM17BKIN) || \ ((OUTPUT) == COMP_Output_TIM17OCREFCLR) || \ ((OUTPUT) == COMP_Output_HRTIM1_FLT6) || \ ((OUTPUT) == COMP_Output_HRTIM1_EE1_2) || \ ((OUTPUT) == COMP_Output_HRTIM1_EE6_2) || \ ((OUTPUT) == COMP_Output_HRTIM1_FLT7) || \ ((OUTPUT) == COMP_Output_HRTIM1_EE2_2) || \ ((OUTPUT) == COMP_Output_HRTIM1_EE7_2) || \ ((OUTPUT) == COMP_Output_HRTIM1_FLT8) || \ ((OUTPUT) == COMP_Output_HRTIM1_EE3_2) || \ ((OUTPUT) == COMP_Output_HRTIM1_EE8_2)) /** * @} */ /** @defgroup COMP_BlankingSrce * @{ */ /* No blanking source can be selected for all comparators */ #define COMP_BlankingSrce_None ((uint32_t)0x00000000) /*!< No blanking source */ /* Blanking source common for COMP1, COMP2, COMP3 and COMP7 */ #define COMP_BlankingSrce_TIM1OC5 COMP_CSR_COMPxBLANKING_0 /*!< TIM1 OC5 selected as blanking source for compartor */ /* Blanking source common for COMP1 and COMP2 */ #define COMP_BlankingSrce_TIM2OC3 COMP_CSR_COMPxBLANKING_1 /*!< TIM2 OC5 selected as blanking source for compartor */ /* Blanking source common for COMP1, COMP2 and COMP5 */ #define COMP_BlankingSrce_TIM3OC3 ((uint32_t)0x000C0000) /*!< TIM2 OC3 selected as blanking source for compartor */ /* Blanking source common for COMP3 and COMP6 */ #define COMP_BlankingSrce_TIM2OC4 ((uint32_t)0x000C0000) /*!< TIM2 OC4 selected as blanking source for compartor */ /* Blanking source common for COMP4, COMP5, COMP6 and COMP7 */ #define COMP_BlankingSrce_TIM8OC5 COMP_CSR_COMPxBLANKING_1 /*!< TIM8 OC5 selected as blanking source for compartor */ /* Blanking source for COMP4 */ #define COMP_BlankingSrce_TIM3OC4 COMP_CSR_COMPxBLANKING_0 /*!< TIM3 OC4 selected as blanking source for compartor */ #define COMP_BlankingSrce_TIM15OC1 ((uint32_t)0x000C0000) /*!< TIM15 OC1 selected as blanking source for compartor */ /* Blanking source common for COMP6 and COMP7 */ #define COMP_BlankingSrce_TIM15OC2 COMP_CSR_COMPxBLANKING_2 /*!< TIM15 OC2 selected as blanking source for compartor */ #define IS_COMP_BLANKING_SOURCE(SOURCE) (((SOURCE) == COMP_BlankingSrce_None) || \ ((SOURCE) == COMP_BlankingSrce_TIM1OC5) || \ ((SOURCE) == COMP_BlankingSrce_TIM2OC3) || \ ((SOURCE) == COMP_BlankingSrce_TIM3OC3) || \ ((SOURCE) == COMP_BlankingSrce_TIM2OC4) || \ ((SOURCE) == COMP_BlankingSrce_TIM8OC5) || \ ((SOURCE) == COMP_BlankingSrce_TIM3OC4) || \ ((SOURCE) == COMP_BlankingSrce_TIM15OC1) || \ ((SOURCE) == COMP_BlankingSrce_TIM15OC2)) /** * @} */ /** @defgroup COMP_OutputPoloarity * @{ */ #define COMP_OutputPol_NonInverted ((uint32_t)0x00000000) /*!< COMP output on GPIO isn't inverted */ #define COMP_OutputPol_Inverted COMP_CSR_COMPxPOL /*!< COMP output on GPIO is inverted */ #define IS_COMP_OUTPUT_POL(POL) (((POL) == COMP_OutputPol_NonInverted) || \ ((POL) == COMP_OutputPol_Inverted)) /** * @} */ /** @defgroup COMP_Hysteresis * @{ */ /* Please refer to the electrical characteristics in the device datasheet for the hysteresis level */ #define COMP_Hysteresis_No 0x00000000 /*!< No hysteresis */ #define COMP_Hysteresis_Low COMP_CSR_COMPxHYST_0 /*!< Hysteresis level low */ #define COMP_Hysteresis_Medium COMP_CSR_COMPxHYST_1 /*!< Hysteresis level medium */ #define COMP_Hysteresis_High COMP_CSR_COMPxHYST /*!< Hysteresis level high */ #define IS_COMP_HYSTERESIS(HYSTERESIS) (((HYSTERESIS) == COMP_Hysteresis_No) || \ ((HYSTERESIS) == COMP_Hysteresis_Low) || \ ((HYSTERESIS) == COMP_Hysteresis_Medium) || \ ((HYSTERESIS) == COMP_Hysteresis_High)) /** * @} */ /** @defgroup COMP_Mode * @{ */ /* Please refer to the electrical characteristics in the device datasheet for the power consumption values */ #define COMP_Mode_HighSpeed 0x00000000 /*!< High Speed */ #define COMP_Mode_MediumSpeed COMP_CSR_COMPxMODE_0 /*!< Medium Speed */ #define COMP_Mode_LowPower COMP_CSR_COMPxMODE_1 /*!< Low power mode */ #define COMP_Mode_UltraLowPower COMP_CSR_COMPxMODE /*!< Ultra-low power mode */ #define IS_COMP_MODE(MODE) (((MODE) == COMP_Mode_UltraLowPower) || \ ((MODE) == COMP_Mode_LowPower) || \ ((MODE) == COMP_Mode_MediumSpeed) || \ ((MODE) == COMP_Mode_HighSpeed)) /** * @} */ /** @defgroup COMP_OutputLevel * @{ */ /* When output polarity is not inverted, comparator output is high when the non-inverting input is at a higher voltage than the inverting input */ #define COMP_OutputLevel_High COMP_CSR_COMPxOUT /* When output polarity is not inverted, comparator output is low when the non-inverting input is at a lower voltage than the inverting input*/ #define COMP_OutputLevel_Low ((uint32_t)0x00000000) /** * @} */ /** @defgroup COMP_WindowMode * @{ */ #define IS_COMP_WINDOW(WINDOW) (((WINDOW) == COMP_Selection_COMP2) || \ ((WINDOW) == COMP_Selection_COMP4) || \ ((WINDOW) == COMP_Selection_COMP6)) /** * @} */ /** * @} */ /* Exported macro ------------------------------------------------------------*/ /* Exported functions ------------------------------------------------------- */ /* Function used to set the COMP configuration to the default reset state ****/ void COMP_DeInit(uint32_t COMP_Selection); /* Initialization and Configuration functions *********************************/ void COMP_Init(uint32_t COMP_Selection, COMP_InitTypeDef* COMP_InitStruct); void COMP_StructInit(COMP_InitTypeDef* COMP_InitStruct); void COMP_Cmd(uint32_t COMP_Selection, FunctionalState NewState); void COMP_SwitchCmd(uint32_t COMP_Selection, FunctionalState NewState); uint32_t COMP_GetOutputLevel(uint32_t COMP_Selection); /* Window mode control function ***********************************************/ void COMP_WindowCmd(uint32_t COMP_Selection, FunctionalState NewState); /* COMP configuration locking function ****************************************/ void COMP_LockConfig(uint32_t COMP_Selection); #ifdef __cplusplus } #endif #endif /*__STM32F30x_COMP_H */ /** * @} */ /** * @} */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/