mbed library sources
Fork of mbed-src by
targets/cmsis/TARGET_Freescale/TARGET_KLXX/TARGET_KL25Z/TOOLCHAIN_GCC_CW_EWL/MKL25Z4.ld
- Committer:
- mbed_official
- Date:
- 2014-01-31
- Revision:
- 82:0b31dbcd4769
File content as of revision 82:0b31dbcd4769:
/* ***************************************************************************** ** ** File : KL25Z128M4_flash.ld ** ** Default linker command file for Flash targets ** ***************************************************************************** */ /* Entry Point */ ENTRY(__thumb_startup) /* Highest address of the user mode stack */ _estack = 0x20003000; /* end of SRAM */ __SP_INIT = _estack; /* Generate a link error if heap and stack don't fit into RAM */ __heap_size = 0x400; /* required amount of heap */ __stack_size = 0x400; /* required amount of stack */ /* Specify the memory areas */ MEMORY { m_interrupts (rx) : ORIGIN = 0x00000000, LENGTH = 0xC0 m_cfmprotrom (rx) : ORIGIN = 0x00000400, LENGTH = 0x10 m_text (rx) : ORIGIN = 0x00000800, LENGTH = 128K - 0x800 m_data (rwx) : ORIGIN = 0x1FFFF000, LENGTH = 16K /* SRAM */ } /* Define output sections */ SECTIONS { /* The startup code goes first into Flash */ .interrupts : { __vector_table = .; . = ALIGN(4); KEEP(*(.vectortable)) /* Startup code */ . = ALIGN(4); } > m_interrupts .cfmprotect : { . = ALIGN(4); KEEP(*(.cfmconfig)) /* Flash Configuration Field (FCF) */ . = ALIGN(4); } > m_cfmprotrom /* The program code and other data goes into Flash */ .text : { . = ALIGN(4); *(.text) /* .text sections (code) */ *(.text*) /* .text* sections (code) */ *(.rodata) /* .rodata sections (constants, strings, etc.) */ *(.rodata*) /* .rodata* sections (constants, strings, etc.) */ *(.glue_7) /* glue arm to thumb code */ *(.glue_7t) /* glue thumb to arm code */ *(.eh_frame) KEEP (*(.init)) KEEP (*(.fini)) . = ALIGN(4); _etext = .; /* define a global symbols at end of code */ } > m_text .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } > m_text .ARM : { __exidx_start = .; *(.ARM.exidx*) __exidx_end = .; } > m_text .ctors : { __CTOR_LIST__ = .; /* gcc uses crtbegin.o to find the start of the constructors, so we make sure it is first. Because this is a wildcard, it doesn't matter if the user does not actually link against crtbegin.o; the linker won't look for a file to match a wildcard. The wildcard also means that it doesn't matter which directory crtbegin.o is in. */ KEEP (*crtbegin.o(.ctors)) /* We don't want to include the .ctor section from from the crtend.o file until after the sorted ctors. The .ctor section from the crtend file contains the end of ctors marker and it must be last */ KEEP (*(EXCLUDE_FILE (*crtend.o ) .ctors)) KEEP (*(SORT(.ctors.*))) KEEP (*(.ctors)) __CTOR_END__ = .; } > m_text .dtors : { __DTOR_LIST__ = .; KEEP (*crtbegin.o(.dtors)) KEEP (*(EXCLUDE_FILE (*crtend.o ) .dtors)) KEEP (*(SORT(.dtors.*))) KEEP (*(.dtors)) __DTOR_END__ = .; } > m_text .preinit_array : { PROVIDE_HIDDEN (__preinit_array_start = .); KEEP (*(.preinit_array*)) PROVIDE_HIDDEN (__preinit_array_end = .); } > m_text .init_array : { PROVIDE_HIDDEN (__init_array_start = .); KEEP (*(SORT(.init_array.*))) KEEP (*(.init_array*)) PROVIDE_HIDDEN (__init_array_end = .); } > m_text .fini_array : { PROVIDE_HIDDEN (__fini_array_start = .); KEEP (*(SORT(.fini_array.*))) KEEP (*(.fini_array*)) PROVIDE_HIDDEN (__fini_array_end = .); ___ROM_AT = .; } > m_text /* reserve MTB memory at the beginning of m_data */ .mtb : /* MTB buffer address as defined by the hardware */ { . = ALIGN(8); _mtb_start = .; KEEP(*(.mtb_buf)) /* need to KEEP Micro Trace Buffer as not referenced by application */ . = ALIGN(8); _mtb_end = .; } > m_data /* Initialized data sections goes into RAM, load LMA copy after code */ .data : AT(___ROM_AT) { . = ALIGN(4); __sinit__ = .; _sdata = .; /* create a global symbol at data start */ *(.data) /* .data sections */ *(.data*) /* .data* sections */ . = ALIGN(4); _edata = .; /* define a global symbol at data end */ } > m_data ___data_size = _edata - _sdata; /* Uninitialized data section */ . = ALIGN(4); .bss : { /* This is used by the startup in order to initialize the .bss section */ __START_BSS = .; PROVIDE ( __bss_start__ = __START_BSS ); *(.bss) *(.bss*) *(COMMON) . = ALIGN(4); __END_BSS = .; PROVIDE ( __bss_end__ = __END_BSS ); } > m_data _romp_at = ___ROM_AT + SIZEOF(.data); .romp : AT(_romp_at) { __S_romp = _romp_at; LONG(___ROM_AT); LONG(_sdata); LONG(___data_size); LONG(0); LONG(0); LONG(0); } > m_data /* User_heap_stack section, used to check that there is enough RAM left */ ._user_heap_stack : { . = ALIGN(4); PROVIDE ( end = . ); PROVIDE ( _end = . ); __heap_addr = .; . = . + __heap_size; . = . + __stack_size; . = ALIGN(4); } > m_data .ARM.attributes 0 : { *(.ARM.attributes) } }