mbed library sources
Fork of mbed-src by
targets/cmsis/TARGET_STM/TARGET_NUCLEO_L152RE/stm32l1xx_usart.c@308:59cc78a25982, 2014-09-05 (annotated)
- Committer:
- todotani
- Date:
- Fri Sep 05 14:20:33 2014 +0000
- Revision:
- 308:59cc78a25982
- Parent:
- 106:ced8cbb51063
BLE_Health_Thermometer for mbed HRM1017 with BLE library 0.1.0
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
mbed_official | 76:aeb1df146756 | 1 | /** |
mbed_official | 76:aeb1df146756 | 2 | ****************************************************************************** |
mbed_official | 76:aeb1df146756 | 3 | * @file stm32l1xx_usart.c |
mbed_official | 76:aeb1df146756 | 4 | * @author MCD Application Team |
mbed_official | 80:66393a7b209d | 5 | * @version V1.3.0 |
mbed_official | 80:66393a7b209d | 6 | * @date 31-January-2014 |
mbed_official | 76:aeb1df146756 | 7 | * @brief This file provides firmware functions to manage the following |
mbed_official | 76:aeb1df146756 | 8 | * functionalities of the Universal synchronous asynchronous receiver |
mbed_official | 76:aeb1df146756 | 9 | * transmitter (USART): |
mbed_official | 76:aeb1df146756 | 10 | * + Initialization and Configuration |
mbed_official | 76:aeb1df146756 | 11 | * + Data transfers |
mbed_official | 76:aeb1df146756 | 12 | * + Multi-Processor Communication |
mbed_official | 76:aeb1df146756 | 13 | * + LIN mode |
mbed_official | 76:aeb1df146756 | 14 | * + Half-duplex mode |
mbed_official | 76:aeb1df146756 | 15 | * + Smartcard mode |
mbed_official | 76:aeb1df146756 | 16 | * + IrDA mode |
mbed_official | 76:aeb1df146756 | 17 | * + DMA transfers management |
mbed_official | 76:aeb1df146756 | 18 | * + Interrupts and flags management |
mbed_official | 76:aeb1df146756 | 19 | * |
mbed_official | 76:aeb1df146756 | 20 | * @verbatim |
mbed_official | 76:aeb1df146756 | 21 | =============================================================================== |
mbed_official | 76:aeb1df146756 | 22 | ##### How to use this driver ##### |
mbed_official | 76:aeb1df146756 | 23 | =============================================================================== |
mbed_official | 76:aeb1df146756 | 24 | [..] |
mbed_official | 76:aeb1df146756 | 25 | (#) Enable peripheral clock using |
mbed_official | 76:aeb1df146756 | 26 | RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1, ENABLE) function for |
mbed_official | 76:aeb1df146756 | 27 | USART1 or using RCC_APB1PeriphClockCmd(RCC_APB1Periph_USARTx, ENABLE) |
mbed_official | 76:aeb1df146756 | 28 | function for USART2 and USART3. |
mbed_official | 76:aeb1df146756 | 29 | (#) According to the USART mode, enable the GPIO clocks using |
mbed_official | 76:aeb1df146756 | 30 | RCC_AHBPeriphClockCmd() function. (The I/O can be TX, RX, CTS, |
mbed_official | 76:aeb1df146756 | 31 | or and SCLK). |
mbed_official | 76:aeb1df146756 | 32 | (#) Peripheral's alternate function: |
mbed_official | 76:aeb1df146756 | 33 | (++) Connect the pin to the desired peripherals' Alternate |
mbed_official | 76:aeb1df146756 | 34 | Function (AF) using GPIO_PinAFConfig() function. |
mbed_official | 76:aeb1df146756 | 35 | (++) Configure the desired pin in alternate function by: |
mbed_official | 76:aeb1df146756 | 36 | GPIO_InitStruct->GPIO_Mode = GPIO_Mode_AF. |
mbed_official | 76:aeb1df146756 | 37 | (++) Select the type, pull-up/pull-down and output speed via |
mbed_official | 76:aeb1df146756 | 38 | GPIO_PuPd, GPIO_OType and GPIO_Speed members. |
mbed_official | 76:aeb1df146756 | 39 | (++) Call GPIO_Init() function. |
mbed_official | 76:aeb1df146756 | 40 | (#) Program the Baud Rate, Word Length , Stop Bit, Parity, Hardware |
mbed_official | 76:aeb1df146756 | 41 | flow control and Mode(Receiver/Transmitter) using the SPI_Init() |
mbed_official | 76:aeb1df146756 | 42 | function. |
mbed_official | 76:aeb1df146756 | 43 | (#) For synchronous mode, enable the clock and program the polarity, |
mbed_official | 76:aeb1df146756 | 44 | phase and last bit using the USART_ClockInit() function. |
mbed_official | 76:aeb1df146756 | 45 | (#) Enable the NVIC and the corresponding interrupt using the function |
mbed_official | 76:aeb1df146756 | 46 | USART_ITConfig() if you need to use interrupt mode. |
mbed_official | 76:aeb1df146756 | 47 | (#) When using the DMA mode. |
mbed_official | 76:aeb1df146756 | 48 | (++) Configure the DMA using DMA_Init() function. |
mbed_official | 76:aeb1df146756 | 49 | (++) Active the needed channel Request using USART_DMACmd() function. |
mbed_official | 76:aeb1df146756 | 50 | (#) Enable the USART using the USART_Cmd() function. |
mbed_official | 76:aeb1df146756 | 51 | (#) Enable the DMA using the DMA_Cmd() function, when using DMA mode. |
mbed_official | 76:aeb1df146756 | 52 | [..] |
mbed_official | 76:aeb1df146756 | 53 | Refer to Multi-Processor, LIN, half-duplex, Smartcard, IrDA sub-sections |
mbed_official | 76:aeb1df146756 | 54 | for more details. |
mbed_official | 76:aeb1df146756 | 55 | |
mbed_official | 76:aeb1df146756 | 56 | @endverbatim |
mbed_official | 76:aeb1df146756 | 57 | |
mbed_official | 76:aeb1df146756 | 58 | ****************************************************************************** |
mbed_official | 76:aeb1df146756 | 59 | * @attention |
mbed_official | 76:aeb1df146756 | 60 | * |
mbed_official | 106:ced8cbb51063 | 61 | * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> |
mbed_official | 76:aeb1df146756 | 62 | * |
mbed_official | 106:ced8cbb51063 | 63 | * Redistribution and use in source and binary forms, with or without modification, |
mbed_official | 106:ced8cbb51063 | 64 | * are permitted provided that the following conditions are met: |
mbed_official | 106:ced8cbb51063 | 65 | * 1. Redistributions of source code must retain the above copyright notice, |
mbed_official | 106:ced8cbb51063 | 66 | * this list of conditions and the following disclaimer. |
mbed_official | 106:ced8cbb51063 | 67 | * 2. Redistributions in binary form must reproduce the above copyright notice, |
mbed_official | 106:ced8cbb51063 | 68 | * this list of conditions and the following disclaimer in the documentation |
mbed_official | 106:ced8cbb51063 | 69 | * and/or other materials provided with the distribution. |
mbed_official | 106:ced8cbb51063 | 70 | * 3. Neither the name of STMicroelectronics nor the names of its contributors |
mbed_official | 106:ced8cbb51063 | 71 | * may be used to endorse or promote products derived from this software |
mbed_official | 106:ced8cbb51063 | 72 | * without specific prior written permission. |
mbed_official | 76:aeb1df146756 | 73 | * |
mbed_official | 106:ced8cbb51063 | 74 | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
mbed_official | 106:ced8cbb51063 | 75 | * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
mbed_official | 106:ced8cbb51063 | 76 | * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
mbed_official | 106:ced8cbb51063 | 77 | * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE |
mbed_official | 106:ced8cbb51063 | 78 | * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
mbed_official | 106:ced8cbb51063 | 79 | * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
mbed_official | 106:ced8cbb51063 | 80 | * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
mbed_official | 106:ced8cbb51063 | 81 | * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
mbed_official | 106:ced8cbb51063 | 82 | * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
mbed_official | 106:ced8cbb51063 | 83 | * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
mbed_official | 76:aeb1df146756 | 84 | * |
mbed_official | 76:aeb1df146756 | 85 | ****************************************************************************** |
mbed_official | 76:aeb1df146756 | 86 | */ |
mbed_official | 76:aeb1df146756 | 87 | |
mbed_official | 76:aeb1df146756 | 88 | /* Includes ------------------------------------------------------------------*/ |
mbed_official | 76:aeb1df146756 | 89 | #include "stm32l1xx_usart.h" |
mbed_official | 76:aeb1df146756 | 90 | #include "stm32l1xx_rcc.h" |
mbed_official | 76:aeb1df146756 | 91 | |
mbed_official | 76:aeb1df146756 | 92 | /** @addtogroup STM32L1xx_StdPeriph_Driver |
mbed_official | 76:aeb1df146756 | 93 | * @{ |
mbed_official | 76:aeb1df146756 | 94 | */ |
mbed_official | 76:aeb1df146756 | 95 | |
mbed_official | 76:aeb1df146756 | 96 | /** @defgroup USART |
mbed_official | 76:aeb1df146756 | 97 | * @brief USART driver modules |
mbed_official | 76:aeb1df146756 | 98 | * @{ |
mbed_official | 76:aeb1df146756 | 99 | */ |
mbed_official | 76:aeb1df146756 | 100 | |
mbed_official | 76:aeb1df146756 | 101 | /* Private typedef -----------------------------------------------------------*/ |
mbed_official | 76:aeb1df146756 | 102 | /* Private define ------------------------------------------------------------*/ |
mbed_official | 76:aeb1df146756 | 103 | |
mbed_official | 76:aeb1df146756 | 104 | /*!< USART CR1 register clear Mask ((~(uint16_t)0xE9F3)) */ |
mbed_official | 76:aeb1df146756 | 105 | #define CR1_CLEAR_MASK ((uint16_t)(USART_CR1_M | USART_CR1_PCE | \ |
mbed_official | 76:aeb1df146756 | 106 | USART_CR1_PS | USART_CR1_TE | \ |
mbed_official | 76:aeb1df146756 | 107 | USART_CR1_RE)) |
mbed_official | 76:aeb1df146756 | 108 | |
mbed_official | 76:aeb1df146756 | 109 | /*!< USART CR2 register clock bits clear Mask ((~(uint16_t)0xF0FF)) */ |
mbed_official | 76:aeb1df146756 | 110 | #define CR2_CLOCK_CLEAR_MASK ((uint16_t)(USART_CR2_CLKEN | USART_CR2_CPOL | \ |
mbed_official | 76:aeb1df146756 | 111 | USART_CR2_CPHA | USART_CR2_LBCL)) |
mbed_official | 76:aeb1df146756 | 112 | |
mbed_official | 76:aeb1df146756 | 113 | /*!< USART CR3 register clear Mask ((~(uint16_t)0xFCFF)) */ |
mbed_official | 76:aeb1df146756 | 114 | #define CR3_CLEAR_MASK ((uint16_t)(USART_CR3_RTSE | USART_CR3_CTSE)) |
mbed_official | 76:aeb1df146756 | 115 | |
mbed_official | 76:aeb1df146756 | 116 | /*!< USART Interrupts mask */ |
mbed_official | 76:aeb1df146756 | 117 | #define IT_MASK ((uint16_t)0x001F) |
mbed_official | 76:aeb1df146756 | 118 | |
mbed_official | 76:aeb1df146756 | 119 | /* Private macro -------------------------------------------------------------*/ |
mbed_official | 76:aeb1df146756 | 120 | /* Private variables ---------------------------------------------------------*/ |
mbed_official | 76:aeb1df146756 | 121 | /* Private function prototypes -----------------------------------------------*/ |
mbed_official | 76:aeb1df146756 | 122 | /* Private functions ---------------------------------------------------------*/ |
mbed_official | 76:aeb1df146756 | 123 | |
mbed_official | 76:aeb1df146756 | 124 | /** @defgroup USART_Private_Functions |
mbed_official | 76:aeb1df146756 | 125 | * @{ |
mbed_official | 76:aeb1df146756 | 126 | */ |
mbed_official | 76:aeb1df146756 | 127 | |
mbed_official | 76:aeb1df146756 | 128 | /** @defgroup USART_Group1 Initialization and Configuration functions |
mbed_official | 76:aeb1df146756 | 129 | * @brief Initialization and Configuration functions |
mbed_official | 76:aeb1df146756 | 130 | * |
mbed_official | 76:aeb1df146756 | 131 | @verbatim |
mbed_official | 76:aeb1df146756 | 132 | =============================================================================== |
mbed_official | 76:aeb1df146756 | 133 | ##### Initialization and Configuration functions ##### |
mbed_official | 76:aeb1df146756 | 134 | =============================================================================== |
mbed_official | 76:aeb1df146756 | 135 | [..] |
mbed_official | 76:aeb1df146756 | 136 | This subsection provides a set of functions allowing to initialize the USART |
mbed_official | 76:aeb1df146756 | 137 | in asynchronous and in synchronous modes. |
mbed_official | 76:aeb1df146756 | 138 | (+) For the asynchronous mode only these parameters can be configured: |
mbed_official | 76:aeb1df146756 | 139 | (+) Baud Rate. |
mbed_official | 76:aeb1df146756 | 140 | (+) Word Length. |
mbed_official | 76:aeb1df146756 | 141 | (+) Stop Bit. |
mbed_official | 76:aeb1df146756 | 142 | (+) Parity: If the parity is enabled, then the MSB bit of the data written |
mbed_official | 76:aeb1df146756 | 143 | in the data register is transmitted but is changed by the parity bit. |
mbed_official | 76:aeb1df146756 | 144 | Depending on the frame length defined by the M bit (8-bits or 9-bits), |
mbed_official | 76:aeb1df146756 | 145 | the possible USART frame formats are as listed in the following table: |
mbed_official | 76:aeb1df146756 | 146 | [..] |
mbed_official | 76:aeb1df146756 | 147 | +-------------------------------------------------------------+ |
mbed_official | 76:aeb1df146756 | 148 | | M bit | PCE bit | USART frame | |
mbed_official | 76:aeb1df146756 | 149 | |---------------------|---------------------------------------| |
mbed_official | 76:aeb1df146756 | 150 | | 0 | 0 | | SB | 8 bit data | STB | | |
mbed_official | 76:aeb1df146756 | 151 | |---------|-----------|---------------------------------------| |
mbed_official | 76:aeb1df146756 | 152 | | 0 | 1 | | SB | 7 bit data | PB | STB | | |
mbed_official | 76:aeb1df146756 | 153 | |---------|-----------|---------------------------------------| |
mbed_official | 76:aeb1df146756 | 154 | | 1 | 0 | | SB | 9 bit data | STB | | |
mbed_official | 76:aeb1df146756 | 155 | |---------|-----------|---------------------------------------| |
mbed_official | 76:aeb1df146756 | 156 | | 1 | 1 | | SB | 8 bit data | PB | STB | | |
mbed_official | 76:aeb1df146756 | 157 | +-------------------------------------------------------------+ |
mbed_official | 76:aeb1df146756 | 158 | [..] |
mbed_official | 76:aeb1df146756 | 159 | (+) Hardware flow control. |
mbed_official | 76:aeb1df146756 | 160 | (+) Receiver/transmitter modes. |
mbed_official | 76:aeb1df146756 | 161 | [..] The USART_Init() function follows the USART asynchronous configuration |
mbed_official | 76:aeb1df146756 | 162 | procedure(details for the procedure are available in reference manual |
mbed_official | 76:aeb1df146756 | 163 | (RM0038)). |
mbed_official | 76:aeb1df146756 | 164 | (+) For the synchronous mode in addition to the asynchronous mode parameters |
mbed_official | 76:aeb1df146756 | 165 | these parameters should be also configured: |
mbed_official | 76:aeb1df146756 | 166 | (++) USART Clock Enabled. |
mbed_official | 76:aeb1df146756 | 167 | (++) USART polarity. |
mbed_official | 76:aeb1df146756 | 168 | (++) USART phase. |
mbed_official | 76:aeb1df146756 | 169 | (++) USART LastBit. |
mbed_official | 76:aeb1df146756 | 170 | [..] These parameters can be configured using the USART_ClockInit() function. |
mbed_official | 76:aeb1df146756 | 171 | |
mbed_official | 76:aeb1df146756 | 172 | @endverbatim |
mbed_official | 76:aeb1df146756 | 173 | * @{ |
mbed_official | 76:aeb1df146756 | 174 | */ |
mbed_official | 76:aeb1df146756 | 175 | |
mbed_official | 76:aeb1df146756 | 176 | /** |
mbed_official | 76:aeb1df146756 | 177 | * @brief Deinitializes the USARTx peripheral registers to their default reset values. |
mbed_official | 76:aeb1df146756 | 178 | * @param USARTx: Select the USART peripheral. |
mbed_official | 76:aeb1df146756 | 179 | * This parameter can be one of the following values: USART1, USART2, USART3, |
mbed_official | 76:aeb1df146756 | 180 | * UART4 or UART5. |
mbed_official | 76:aeb1df146756 | 181 | * @retval None. |
mbed_official | 76:aeb1df146756 | 182 | */ |
mbed_official | 76:aeb1df146756 | 183 | void USART_DeInit(USART_TypeDef* USARTx) |
mbed_official | 76:aeb1df146756 | 184 | { |
mbed_official | 76:aeb1df146756 | 185 | /* Check the parameters */ |
mbed_official | 76:aeb1df146756 | 186 | assert_param(IS_USART_ALL_PERIPH(USARTx)); |
mbed_official | 76:aeb1df146756 | 187 | |
mbed_official | 76:aeb1df146756 | 188 | if (USARTx == USART1) |
mbed_official | 76:aeb1df146756 | 189 | { |
mbed_official | 76:aeb1df146756 | 190 | RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, ENABLE); |
mbed_official | 76:aeb1df146756 | 191 | RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, DISABLE); |
mbed_official | 76:aeb1df146756 | 192 | } |
mbed_official | 76:aeb1df146756 | 193 | else if (USARTx == USART2) |
mbed_official | 76:aeb1df146756 | 194 | { |
mbed_official | 76:aeb1df146756 | 195 | RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART2, ENABLE); |
mbed_official | 76:aeb1df146756 | 196 | RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART2, DISABLE); |
mbed_official | 76:aeb1df146756 | 197 | } |
mbed_official | 76:aeb1df146756 | 198 | else if (USARTx == USART3) |
mbed_official | 76:aeb1df146756 | 199 | { |
mbed_official | 76:aeb1df146756 | 200 | RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART3, ENABLE); |
mbed_official | 76:aeb1df146756 | 201 | RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART3, DISABLE); |
mbed_official | 76:aeb1df146756 | 202 | } |
mbed_official | 76:aeb1df146756 | 203 | else if (USARTx == UART4) |
mbed_official | 76:aeb1df146756 | 204 | { |
mbed_official | 76:aeb1df146756 | 205 | RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART4, ENABLE); |
mbed_official | 76:aeb1df146756 | 206 | RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART4, DISABLE); |
mbed_official | 76:aeb1df146756 | 207 | } |
mbed_official | 76:aeb1df146756 | 208 | else |
mbed_official | 76:aeb1df146756 | 209 | { |
mbed_official | 76:aeb1df146756 | 210 | if (USARTx == UART5) |
mbed_official | 76:aeb1df146756 | 211 | { |
mbed_official | 76:aeb1df146756 | 212 | RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART5, ENABLE); |
mbed_official | 76:aeb1df146756 | 213 | RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART5, DISABLE); |
mbed_official | 76:aeb1df146756 | 214 | } |
mbed_official | 76:aeb1df146756 | 215 | } |
mbed_official | 76:aeb1df146756 | 216 | } |
mbed_official | 76:aeb1df146756 | 217 | |
mbed_official | 76:aeb1df146756 | 218 | /** |
mbed_official | 76:aeb1df146756 | 219 | * @brief Initializes the USARTx peripheral according to the specified |
mbed_official | 76:aeb1df146756 | 220 | * parameters in the USART_InitStruct. |
mbed_official | 76:aeb1df146756 | 221 | * @param USARTx: Select the USART peripheral. |
mbed_official | 76:aeb1df146756 | 222 | * This parameter can be one of the following values: USART1, USART2, USART3, |
mbed_official | 76:aeb1df146756 | 223 | * UART4 or UART5. |
mbed_official | 76:aeb1df146756 | 224 | * @param USART_InitStruct: pointer to a USART_InitTypeDef structure that |
mbed_official | 76:aeb1df146756 | 225 | * contains the configuration information for the specified USART peripheral. |
mbed_official | 76:aeb1df146756 | 226 | * @retval None. |
mbed_official | 76:aeb1df146756 | 227 | */ |
mbed_official | 76:aeb1df146756 | 228 | void USART_Init(USART_TypeDef* USARTx, USART_InitTypeDef* USART_InitStruct) |
mbed_official | 76:aeb1df146756 | 229 | { |
mbed_official | 76:aeb1df146756 | 230 | uint32_t tmpreg = 0x00, apbclock = 0x00; |
mbed_official | 76:aeb1df146756 | 231 | uint32_t integerdivider = 0x00; |
mbed_official | 76:aeb1df146756 | 232 | uint32_t fractionaldivider = 0x00; |
mbed_official | 76:aeb1df146756 | 233 | RCC_ClocksTypeDef RCC_ClocksStatus; |
mbed_official | 76:aeb1df146756 | 234 | |
mbed_official | 76:aeb1df146756 | 235 | /* Check the parameters */ |
mbed_official | 76:aeb1df146756 | 236 | assert_param(IS_USART_ALL_PERIPH(USARTx)); |
mbed_official | 76:aeb1df146756 | 237 | assert_param(IS_USART_BAUDRATE(USART_InitStruct->USART_BaudRate)); |
mbed_official | 76:aeb1df146756 | 238 | assert_param(IS_USART_WORD_LENGTH(USART_InitStruct->USART_WordLength)); |
mbed_official | 76:aeb1df146756 | 239 | assert_param(IS_USART_STOPBITS(USART_InitStruct->USART_StopBits)); |
mbed_official | 76:aeb1df146756 | 240 | assert_param(IS_USART_PARITY(USART_InitStruct->USART_Parity)); |
mbed_official | 76:aeb1df146756 | 241 | assert_param(IS_USART_MODE(USART_InitStruct->USART_Mode)); |
mbed_official | 76:aeb1df146756 | 242 | assert_param(IS_USART_HARDWARE_FLOW_CONTROL(USART_InitStruct->USART_HardwareFlowControl)); |
mbed_official | 76:aeb1df146756 | 243 | |
mbed_official | 76:aeb1df146756 | 244 | /* The hardware flow control is available only for USART1, USART2 and USART3 */ |
mbed_official | 76:aeb1df146756 | 245 | if (USART_InitStruct->USART_HardwareFlowControl != USART_HardwareFlowControl_None) |
mbed_official | 76:aeb1df146756 | 246 | { |
mbed_official | 76:aeb1df146756 | 247 | assert_param(IS_USART_123_PERIPH(USARTx)); |
mbed_official | 76:aeb1df146756 | 248 | } |
mbed_official | 76:aeb1df146756 | 249 | |
mbed_official | 76:aeb1df146756 | 250 | /*---------------------------- USART CR2 Configuration -----------------------*/ |
mbed_official | 76:aeb1df146756 | 251 | tmpreg = USARTx->CR2; |
mbed_official | 76:aeb1df146756 | 252 | /* Clear STOP[13:12] bits */ |
mbed_official | 76:aeb1df146756 | 253 | tmpreg &= (uint32_t)~((uint32_t)USART_CR2_STOP); |
mbed_official | 76:aeb1df146756 | 254 | |
mbed_official | 76:aeb1df146756 | 255 | /* Configure the USART Stop Bits, Clock, CPOL, CPHA and LastBit ------------*/ |
mbed_official | 76:aeb1df146756 | 256 | /* Set STOP[13:12] bits according to USART_StopBits value */ |
mbed_official | 76:aeb1df146756 | 257 | tmpreg |= (uint32_t)USART_InitStruct->USART_StopBits; |
mbed_official | 76:aeb1df146756 | 258 | |
mbed_official | 76:aeb1df146756 | 259 | /* Write to USART CR2 */ |
mbed_official | 76:aeb1df146756 | 260 | USARTx->CR2 = (uint16_t)tmpreg; |
mbed_official | 76:aeb1df146756 | 261 | |
mbed_official | 76:aeb1df146756 | 262 | /*---------------------------- USART CR1 Configuration -----------------------*/ |
mbed_official | 76:aeb1df146756 | 263 | tmpreg = USARTx->CR1; |
mbed_official | 76:aeb1df146756 | 264 | /* Clear M, PCE, PS, TE and RE bits */ |
mbed_official | 76:aeb1df146756 | 265 | tmpreg &= (uint32_t)~((uint32_t)CR1_CLEAR_MASK); |
mbed_official | 76:aeb1df146756 | 266 | |
mbed_official | 76:aeb1df146756 | 267 | /* Configure the USART Word Length, Parity and mode ----------------------- */ |
mbed_official | 76:aeb1df146756 | 268 | /* Set the M bits according to USART_WordLength value */ |
mbed_official | 76:aeb1df146756 | 269 | /* Set PCE and PS bits according to USART_Parity value */ |
mbed_official | 76:aeb1df146756 | 270 | /* Set TE and RE bits according to USART_Mode value */ |
mbed_official | 76:aeb1df146756 | 271 | tmpreg |= (uint32_t)USART_InitStruct->USART_WordLength | USART_InitStruct->USART_Parity | |
mbed_official | 76:aeb1df146756 | 272 | USART_InitStruct->USART_Mode; |
mbed_official | 76:aeb1df146756 | 273 | |
mbed_official | 76:aeb1df146756 | 274 | /* Write to USART CR1 */ |
mbed_official | 76:aeb1df146756 | 275 | USARTx->CR1 = (uint16_t)tmpreg; |
mbed_official | 76:aeb1df146756 | 276 | |
mbed_official | 76:aeb1df146756 | 277 | /*---------------------------- USART CR3 Configuration -----------------------*/ |
mbed_official | 76:aeb1df146756 | 278 | tmpreg = USARTx->CR3; |
mbed_official | 76:aeb1df146756 | 279 | /* Clear CTSE and RTSE bits */ |
mbed_official | 76:aeb1df146756 | 280 | tmpreg &= (uint32_t)~((uint32_t)CR3_CLEAR_MASK); |
mbed_official | 76:aeb1df146756 | 281 | |
mbed_official | 76:aeb1df146756 | 282 | /* Configure the USART HFC -------------------------------------------------*/ |
mbed_official | 76:aeb1df146756 | 283 | /* Set CTSE and RTSE bits according to USART_HardwareFlowControl value */ |
mbed_official | 76:aeb1df146756 | 284 | tmpreg |= USART_InitStruct->USART_HardwareFlowControl; |
mbed_official | 76:aeb1df146756 | 285 | |
mbed_official | 76:aeb1df146756 | 286 | /* Write to USART CR3 */ |
mbed_official | 76:aeb1df146756 | 287 | USARTx->CR3 = (uint16_t)tmpreg; |
mbed_official | 76:aeb1df146756 | 288 | |
mbed_official | 76:aeb1df146756 | 289 | /*---------------------------- USART BRR Configuration -----------------------*/ |
mbed_official | 76:aeb1df146756 | 290 | /* Configure the USART Baud Rate -------------------------------------------*/ |
mbed_official | 76:aeb1df146756 | 291 | RCC_GetClocksFreq(&RCC_ClocksStatus); |
mbed_official | 76:aeb1df146756 | 292 | if (USARTx == USART1) |
mbed_official | 76:aeb1df146756 | 293 | { |
mbed_official | 76:aeb1df146756 | 294 | apbclock = RCC_ClocksStatus.PCLK2_Frequency; |
mbed_official | 76:aeb1df146756 | 295 | } |
mbed_official | 76:aeb1df146756 | 296 | else |
mbed_official | 76:aeb1df146756 | 297 | { |
mbed_official | 76:aeb1df146756 | 298 | apbclock = RCC_ClocksStatus.PCLK1_Frequency; |
mbed_official | 76:aeb1df146756 | 299 | } |
mbed_official | 76:aeb1df146756 | 300 | |
mbed_official | 76:aeb1df146756 | 301 | /* Determine the integer part */ |
mbed_official | 76:aeb1df146756 | 302 | if ((USARTx->CR1 & USART_CR1_OVER8) != 0) |
mbed_official | 76:aeb1df146756 | 303 | { |
mbed_official | 76:aeb1df146756 | 304 | /* Integer part computing in case Oversampling mode is 8 Samples */ |
mbed_official | 76:aeb1df146756 | 305 | integerdivider = ((25 * apbclock) / (2 * (USART_InitStruct->USART_BaudRate))); |
mbed_official | 76:aeb1df146756 | 306 | } |
mbed_official | 76:aeb1df146756 | 307 | else /* if ((USARTx->CR1 & CR1_OVER8_Set) == 0) */ |
mbed_official | 76:aeb1df146756 | 308 | { |
mbed_official | 76:aeb1df146756 | 309 | /* Integer part computing in case Oversampling mode is 16 Samples */ |
mbed_official | 76:aeb1df146756 | 310 | integerdivider = ((25 * apbclock) / (4 * (USART_InitStruct->USART_BaudRate))); |
mbed_official | 76:aeb1df146756 | 311 | } |
mbed_official | 76:aeb1df146756 | 312 | tmpreg = (integerdivider / 100) << 4; |
mbed_official | 76:aeb1df146756 | 313 | |
mbed_official | 76:aeb1df146756 | 314 | /* Determine the fractional part */ |
mbed_official | 76:aeb1df146756 | 315 | fractionaldivider = integerdivider - (100 * (tmpreg >> 4)); |
mbed_official | 76:aeb1df146756 | 316 | |
mbed_official | 76:aeb1df146756 | 317 | /* Implement the fractional part in the register */ |
mbed_official | 76:aeb1df146756 | 318 | if ((USARTx->CR1 & USART_CR1_OVER8) != 0) |
mbed_official | 76:aeb1df146756 | 319 | { |
mbed_official | 76:aeb1df146756 | 320 | tmpreg |= ((((fractionaldivider * 8) + 50) / 100)) & ((uint8_t)0x07); |
mbed_official | 76:aeb1df146756 | 321 | } |
mbed_official | 76:aeb1df146756 | 322 | else /* if ((USARTx->CR1 & CR1_OVER8_Set) == 0) */ |
mbed_official | 76:aeb1df146756 | 323 | { |
mbed_official | 76:aeb1df146756 | 324 | tmpreg |= ((((fractionaldivider * 16) + 50) / 100)) & ((uint8_t)0x0F); |
mbed_official | 76:aeb1df146756 | 325 | } |
mbed_official | 76:aeb1df146756 | 326 | |
mbed_official | 76:aeb1df146756 | 327 | /* Write to USART BRR */ |
mbed_official | 76:aeb1df146756 | 328 | USARTx->BRR = (uint16_t)tmpreg; |
mbed_official | 76:aeb1df146756 | 329 | } |
mbed_official | 76:aeb1df146756 | 330 | |
mbed_official | 76:aeb1df146756 | 331 | /** |
mbed_official | 76:aeb1df146756 | 332 | * @brief Fills each USART_InitStruct member with its default value. |
mbed_official | 76:aeb1df146756 | 333 | * @param USART_InitStruct: pointer to a USART_InitTypeDef structure |
mbed_official | 76:aeb1df146756 | 334 | * which will be initialized. |
mbed_official | 76:aeb1df146756 | 335 | * @retval None |
mbed_official | 76:aeb1df146756 | 336 | */ |
mbed_official | 76:aeb1df146756 | 337 | void USART_StructInit(USART_InitTypeDef* USART_InitStruct) |
mbed_official | 76:aeb1df146756 | 338 | { |
mbed_official | 76:aeb1df146756 | 339 | /* USART_InitStruct members default value */ |
mbed_official | 76:aeb1df146756 | 340 | USART_InitStruct->USART_BaudRate = 9600; |
mbed_official | 76:aeb1df146756 | 341 | USART_InitStruct->USART_WordLength = USART_WordLength_8b; |
mbed_official | 76:aeb1df146756 | 342 | USART_InitStruct->USART_StopBits = USART_StopBits_1; |
mbed_official | 76:aeb1df146756 | 343 | USART_InitStruct->USART_Parity = USART_Parity_No ; |
mbed_official | 76:aeb1df146756 | 344 | USART_InitStruct->USART_Mode = USART_Mode_Rx | USART_Mode_Tx; |
mbed_official | 76:aeb1df146756 | 345 | USART_InitStruct->USART_HardwareFlowControl = USART_HardwareFlowControl_None; |
mbed_official | 76:aeb1df146756 | 346 | } |
mbed_official | 76:aeb1df146756 | 347 | |
mbed_official | 76:aeb1df146756 | 348 | /** |
mbed_official | 76:aeb1df146756 | 349 | * @brief Initializes the USARTx peripheral Clock according to the |
mbed_official | 76:aeb1df146756 | 350 | * specified parameters in the USART_ClockInitStruct. |
mbed_official | 76:aeb1df146756 | 351 | * @param USARTx: where x can be 1, 2, 3 to select the USART peripheral. |
mbed_official | 76:aeb1df146756 | 352 | * @param USART_ClockInitStruct: pointer to a USART_ClockInitTypeDef |
mbed_official | 76:aeb1df146756 | 353 | * structure that contains the configuration information for the specified |
mbed_official | 76:aeb1df146756 | 354 | * USART peripheral. |
mbed_official | 76:aeb1df146756 | 355 | * @note The Smart Card and Synchronous modes are not available for UART4 and UART5. |
mbed_official | 76:aeb1df146756 | 356 | * @retval None. |
mbed_official | 76:aeb1df146756 | 357 | */ |
mbed_official | 76:aeb1df146756 | 358 | void USART_ClockInit(USART_TypeDef* USARTx, USART_ClockInitTypeDef* USART_ClockInitStruct) |
mbed_official | 76:aeb1df146756 | 359 | { |
mbed_official | 76:aeb1df146756 | 360 | uint32_t tmpreg = 0x00; |
mbed_official | 76:aeb1df146756 | 361 | /* Check the parameters */ |
mbed_official | 76:aeb1df146756 | 362 | assert_param(IS_USART_123_PERIPH(USARTx)); |
mbed_official | 76:aeb1df146756 | 363 | assert_param(IS_USART_CLOCK(USART_ClockInitStruct->USART_Clock)); |
mbed_official | 76:aeb1df146756 | 364 | assert_param(IS_USART_CPOL(USART_ClockInitStruct->USART_CPOL)); |
mbed_official | 76:aeb1df146756 | 365 | assert_param(IS_USART_CPHA(USART_ClockInitStruct->USART_CPHA)); |
mbed_official | 76:aeb1df146756 | 366 | assert_param(IS_USART_LASTBIT(USART_ClockInitStruct->USART_LastBit)); |
mbed_official | 76:aeb1df146756 | 367 | |
mbed_official | 76:aeb1df146756 | 368 | /*---------------------------- USART CR2 Configuration -----------------------*/ |
mbed_official | 76:aeb1df146756 | 369 | tmpreg = USARTx->CR2; |
mbed_official | 76:aeb1df146756 | 370 | /* Clear CLKEN, CPOL, CPHA and LBCL bits */ |
mbed_official | 76:aeb1df146756 | 371 | tmpreg &= (uint32_t)~((uint32_t)CR2_CLOCK_CLEAR_MASK); |
mbed_official | 76:aeb1df146756 | 372 | /* Configure the USART Clock, CPOL, CPHA and LastBit ------------*/ |
mbed_official | 76:aeb1df146756 | 373 | /* Set CLKEN bit according to USART_Clock value */ |
mbed_official | 76:aeb1df146756 | 374 | /* Set CPOL bit according to USART_CPOL value */ |
mbed_official | 76:aeb1df146756 | 375 | /* Set CPHA bit according to USART_CPHA value */ |
mbed_official | 76:aeb1df146756 | 376 | /* Set LBCL bit according to USART_LastBit value */ |
mbed_official | 76:aeb1df146756 | 377 | tmpreg |= (uint32_t)USART_ClockInitStruct->USART_Clock | USART_ClockInitStruct->USART_CPOL | |
mbed_official | 76:aeb1df146756 | 378 | USART_ClockInitStruct->USART_CPHA | USART_ClockInitStruct->USART_LastBit; |
mbed_official | 76:aeb1df146756 | 379 | /* Write to USART CR2 */ |
mbed_official | 76:aeb1df146756 | 380 | USARTx->CR2 = (uint16_t)tmpreg; |
mbed_official | 76:aeb1df146756 | 381 | } |
mbed_official | 76:aeb1df146756 | 382 | |
mbed_official | 76:aeb1df146756 | 383 | /** |
mbed_official | 76:aeb1df146756 | 384 | * @brief Fills each USART_ClockInitStruct member with its default value. |
mbed_official | 76:aeb1df146756 | 385 | * @param USART_ClockInitStruct: pointer to a USART_ClockInitTypeDef |
mbed_official | 76:aeb1df146756 | 386 | * structure which will be initialized. |
mbed_official | 76:aeb1df146756 | 387 | * @retval None |
mbed_official | 76:aeb1df146756 | 388 | */ |
mbed_official | 76:aeb1df146756 | 389 | void USART_ClockStructInit(USART_ClockInitTypeDef* USART_ClockInitStruct) |
mbed_official | 76:aeb1df146756 | 390 | { |
mbed_official | 76:aeb1df146756 | 391 | /* USART_ClockInitStruct members default value */ |
mbed_official | 76:aeb1df146756 | 392 | USART_ClockInitStruct->USART_Clock = USART_Clock_Disable; |
mbed_official | 76:aeb1df146756 | 393 | USART_ClockInitStruct->USART_CPOL = USART_CPOL_Low; |
mbed_official | 76:aeb1df146756 | 394 | USART_ClockInitStruct->USART_CPHA = USART_CPHA_1Edge; |
mbed_official | 76:aeb1df146756 | 395 | USART_ClockInitStruct->USART_LastBit = USART_LastBit_Disable; |
mbed_official | 76:aeb1df146756 | 396 | } |
mbed_official | 76:aeb1df146756 | 397 | |
mbed_official | 76:aeb1df146756 | 398 | /** |
mbed_official | 76:aeb1df146756 | 399 | * @brief Enables or disables the specified USART peripheral. |
mbed_official | 76:aeb1df146756 | 400 | * @param USARTx: Select the USART peripheral. |
mbed_official | 76:aeb1df146756 | 401 | * This parameter can be one of the following values: |
mbed_official | 76:aeb1df146756 | 402 | * USART1, USART2, USART3, UART4 or UART5. |
mbed_official | 76:aeb1df146756 | 403 | * @param NewState: new state of the USARTx peripheral. |
mbed_official | 76:aeb1df146756 | 404 | * This parameter can be: ENABLE or DISABLE. |
mbed_official | 76:aeb1df146756 | 405 | * @retval None. |
mbed_official | 76:aeb1df146756 | 406 | */ |
mbed_official | 76:aeb1df146756 | 407 | void USART_Cmd(USART_TypeDef* USARTx, FunctionalState NewState) |
mbed_official | 76:aeb1df146756 | 408 | { |
mbed_official | 76:aeb1df146756 | 409 | /* Check the parameters */ |
mbed_official | 76:aeb1df146756 | 410 | assert_param(IS_USART_ALL_PERIPH(USARTx)); |
mbed_official | 76:aeb1df146756 | 411 | assert_param(IS_FUNCTIONAL_STATE(NewState)); |
mbed_official | 76:aeb1df146756 | 412 | |
mbed_official | 76:aeb1df146756 | 413 | if (NewState != DISABLE) |
mbed_official | 76:aeb1df146756 | 414 | { |
mbed_official | 76:aeb1df146756 | 415 | /* Enable the selected USART by setting the UE bit in the CR1 register */ |
mbed_official | 76:aeb1df146756 | 416 | USARTx->CR1 |= USART_CR1_UE; |
mbed_official | 76:aeb1df146756 | 417 | } |
mbed_official | 76:aeb1df146756 | 418 | else |
mbed_official | 76:aeb1df146756 | 419 | { |
mbed_official | 76:aeb1df146756 | 420 | /* Disable the selected USART by clearing the UE bit in the CR1 register */ |
mbed_official | 76:aeb1df146756 | 421 | USARTx->CR1 &= (uint16_t)~((uint16_t)USART_CR1_UE); |
mbed_official | 76:aeb1df146756 | 422 | } |
mbed_official | 76:aeb1df146756 | 423 | } |
mbed_official | 76:aeb1df146756 | 424 | |
mbed_official | 76:aeb1df146756 | 425 | /** |
mbed_official | 76:aeb1df146756 | 426 | * @brief Sets the system clock prescaler. |
mbed_official | 76:aeb1df146756 | 427 | * @param USARTx: Select the USART peripheral. |
mbed_official | 76:aeb1df146756 | 428 | * This parameter can be one of the following values: |
mbed_official | 76:aeb1df146756 | 429 | * USART1, USART2, USART3, UART4 or UART5. |
mbed_official | 76:aeb1df146756 | 430 | * @param USART_Prescaler: specifies the prescaler clock. |
mbed_official | 76:aeb1df146756 | 431 | * @note The function is used for IrDA mode with UART4 and UART5. |
mbed_official | 76:aeb1df146756 | 432 | * @retval None. |
mbed_official | 76:aeb1df146756 | 433 | */ |
mbed_official | 76:aeb1df146756 | 434 | void USART_SetPrescaler(USART_TypeDef* USARTx, uint8_t USART_Prescaler) |
mbed_official | 76:aeb1df146756 | 435 | { |
mbed_official | 76:aeb1df146756 | 436 | /* Check the parameters */ |
mbed_official | 76:aeb1df146756 | 437 | assert_param(IS_USART_ALL_PERIPH(USARTx)); |
mbed_official | 76:aeb1df146756 | 438 | |
mbed_official | 76:aeb1df146756 | 439 | /* Clear the USART prescaler */ |
mbed_official | 76:aeb1df146756 | 440 | USARTx->GTPR &= USART_GTPR_GT; |
mbed_official | 76:aeb1df146756 | 441 | /* Set the USART prescaler */ |
mbed_official | 76:aeb1df146756 | 442 | USARTx->GTPR |= USART_Prescaler; |
mbed_official | 76:aeb1df146756 | 443 | } |
mbed_official | 76:aeb1df146756 | 444 | |
mbed_official | 76:aeb1df146756 | 445 | /** |
mbed_official | 76:aeb1df146756 | 446 | * @brief Enables or disables the USART's 8x oversampling mode. |
mbed_official | 76:aeb1df146756 | 447 | * @param USARTx: Select the USART peripheral. |
mbed_official | 76:aeb1df146756 | 448 | * This parameter can be one of the following values: |
mbed_official | 76:aeb1df146756 | 449 | * USART1, USART2, USART3, UART4 or UART5. |
mbed_official | 76:aeb1df146756 | 450 | * @param NewState: new state of the USART 8x oversampling mode. |
mbed_official | 76:aeb1df146756 | 451 | * This parameter can be: ENABLE or DISABLE. |
mbed_official | 76:aeb1df146756 | 452 | * |
mbed_official | 76:aeb1df146756 | 453 | * @note |
mbed_official | 76:aeb1df146756 | 454 | * This function has to be called before calling USART_Init() |
mbed_official | 76:aeb1df146756 | 455 | * function in order to have correct baudrate Divider value. |
mbed_official | 76:aeb1df146756 | 456 | * @retval None |
mbed_official | 76:aeb1df146756 | 457 | */ |
mbed_official | 76:aeb1df146756 | 458 | void USART_OverSampling8Cmd(USART_TypeDef* USARTx, FunctionalState NewState) |
mbed_official | 76:aeb1df146756 | 459 | { |
mbed_official | 76:aeb1df146756 | 460 | /* Check the parameters */ |
mbed_official | 76:aeb1df146756 | 461 | assert_param(IS_USART_ALL_PERIPH(USARTx)); |
mbed_official | 76:aeb1df146756 | 462 | assert_param(IS_FUNCTIONAL_STATE(NewState)); |
mbed_official | 76:aeb1df146756 | 463 | |
mbed_official | 76:aeb1df146756 | 464 | if (NewState != DISABLE) |
mbed_official | 76:aeb1df146756 | 465 | { |
mbed_official | 76:aeb1df146756 | 466 | /* Enable the 8x Oversampling mode by setting the OVER8 bit in the CR1 register */ |
mbed_official | 76:aeb1df146756 | 467 | USARTx->CR1 |= USART_CR1_OVER8; |
mbed_official | 76:aeb1df146756 | 468 | } |
mbed_official | 76:aeb1df146756 | 469 | else |
mbed_official | 76:aeb1df146756 | 470 | { |
mbed_official | 76:aeb1df146756 | 471 | /* Disable the 8x Oversampling mode by clearing the OVER8 bit in the CR1 register */ |
mbed_official | 76:aeb1df146756 | 472 | USARTx->CR1 &= (uint16_t)~((uint16_t)USART_CR1_OVER8); |
mbed_official | 76:aeb1df146756 | 473 | } |
mbed_official | 76:aeb1df146756 | 474 | } |
mbed_official | 76:aeb1df146756 | 475 | |
mbed_official | 76:aeb1df146756 | 476 | /** |
mbed_official | 76:aeb1df146756 | 477 | * @brief Enables or disables the USART's one bit sampling method. |
mbed_official | 76:aeb1df146756 | 478 | * @param USARTx: Select the USART peripheral. |
mbed_official | 76:aeb1df146756 | 479 | * This parameter can be one of the following values: |
mbed_official | 76:aeb1df146756 | 480 | * USART1, USART2, USART3, UART4 or UART5. |
mbed_official | 76:aeb1df146756 | 481 | * @param NewState: new state of the USART one bit sampling method. |
mbed_official | 76:aeb1df146756 | 482 | * This parameter can be: ENABLE or DISABLE. |
mbed_official | 76:aeb1df146756 | 483 | * @retval None. |
mbed_official | 76:aeb1df146756 | 484 | */ |
mbed_official | 76:aeb1df146756 | 485 | void USART_OneBitMethodCmd(USART_TypeDef* USARTx, FunctionalState NewState) |
mbed_official | 76:aeb1df146756 | 486 | { |
mbed_official | 76:aeb1df146756 | 487 | /* Check the parameters */ |
mbed_official | 76:aeb1df146756 | 488 | assert_param(IS_USART_ALL_PERIPH(USARTx)); |
mbed_official | 76:aeb1df146756 | 489 | assert_param(IS_FUNCTIONAL_STATE(NewState)); |
mbed_official | 76:aeb1df146756 | 490 | |
mbed_official | 76:aeb1df146756 | 491 | if (NewState != DISABLE) |
mbed_official | 76:aeb1df146756 | 492 | { |
mbed_official | 76:aeb1df146756 | 493 | /* Enable the one bit method by setting the ONEBITE bit in the CR3 register */ |
mbed_official | 76:aeb1df146756 | 494 | USARTx->CR3 |= USART_CR3_ONEBIT; |
mbed_official | 76:aeb1df146756 | 495 | } |
mbed_official | 76:aeb1df146756 | 496 | else |
mbed_official | 76:aeb1df146756 | 497 | { |
mbed_official | 76:aeb1df146756 | 498 | /* Disable the one bit method by clearing the ONEBITE bit in the CR3 register */ |
mbed_official | 76:aeb1df146756 | 499 | USARTx->CR3 &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT); |
mbed_official | 76:aeb1df146756 | 500 | } |
mbed_official | 76:aeb1df146756 | 501 | } |
mbed_official | 76:aeb1df146756 | 502 | |
mbed_official | 76:aeb1df146756 | 503 | /** |
mbed_official | 76:aeb1df146756 | 504 | * @} |
mbed_official | 76:aeb1df146756 | 505 | */ |
mbed_official | 76:aeb1df146756 | 506 | |
mbed_official | 76:aeb1df146756 | 507 | /** @defgroup USART_Group2 Data transfers functions |
mbed_official | 76:aeb1df146756 | 508 | * @brief Data transfers functions |
mbed_official | 76:aeb1df146756 | 509 | * |
mbed_official | 76:aeb1df146756 | 510 | @verbatim |
mbed_official | 76:aeb1df146756 | 511 | =============================================================================== |
mbed_official | 76:aeb1df146756 | 512 | ##### Data transfers functions ##### |
mbed_official | 76:aeb1df146756 | 513 | =============================================================================== |
mbed_official | 76:aeb1df146756 | 514 | [..] This subsection provides a set of functions allowing to manage |
mbed_official | 76:aeb1df146756 | 515 | the USART data transfers. |
mbed_official | 76:aeb1df146756 | 516 | [..] During an USART reception, data shifts in least significant bit first |
mbed_official | 76:aeb1df146756 | 517 | through the RX pin. In this mode, the USART_DR register consists of |
mbed_official | 76:aeb1df146756 | 518 | a buffer (RDR) between the internal bus and the received shift register. |
mbed_official | 76:aeb1df146756 | 519 | When a transmission is taking place, a write instruction to |
mbed_official | 76:aeb1df146756 | 520 | the USART_DR register stores the data in the TDR register and which is |
mbed_official | 76:aeb1df146756 | 521 | copied in the shift register at the end of the current transmission. |
mbed_official | 76:aeb1df146756 | 522 | [..] The read access of the USART_DR register can be done using |
mbed_official | 76:aeb1df146756 | 523 | the USART_ReceiveData() function and returns the RDR buffered value. |
mbed_official | 76:aeb1df146756 | 524 | Whereas a write access to the USART_DR can be done using USART_SendData() |
mbed_official | 76:aeb1df146756 | 525 | function and stores the written data into TDR buffer. |
mbed_official | 76:aeb1df146756 | 526 | |
mbed_official | 76:aeb1df146756 | 527 | @endverbatim |
mbed_official | 76:aeb1df146756 | 528 | * @{ |
mbed_official | 76:aeb1df146756 | 529 | */ |
mbed_official | 76:aeb1df146756 | 530 | |
mbed_official | 76:aeb1df146756 | 531 | /** |
mbed_official | 76:aeb1df146756 | 532 | * @brief Transmits single data through the USARTx peripheral. |
mbed_official | 76:aeb1df146756 | 533 | * @param USARTx: Select the USART peripheral. |
mbed_official | 76:aeb1df146756 | 534 | * This parameter can be one of the following values: |
mbed_official | 76:aeb1df146756 | 535 | * USART1, USART2, USART3, UART4 or UART5. |
mbed_official | 76:aeb1df146756 | 536 | * @param Data: the data to transmit. |
mbed_official | 76:aeb1df146756 | 537 | * @retval None. |
mbed_official | 76:aeb1df146756 | 538 | */ |
mbed_official | 76:aeb1df146756 | 539 | void USART_SendData(USART_TypeDef* USARTx, uint16_t Data) |
mbed_official | 76:aeb1df146756 | 540 | { |
mbed_official | 76:aeb1df146756 | 541 | /* Check the parameters */ |
mbed_official | 76:aeb1df146756 | 542 | assert_param(IS_USART_ALL_PERIPH(USARTx)); |
mbed_official | 76:aeb1df146756 | 543 | assert_param(IS_USART_DATA(Data)); |
mbed_official | 76:aeb1df146756 | 544 | |
mbed_official | 76:aeb1df146756 | 545 | /* Transmit Data */ |
mbed_official | 76:aeb1df146756 | 546 | USARTx->DR = (Data & (uint16_t)0x01FF); |
mbed_official | 76:aeb1df146756 | 547 | } |
mbed_official | 76:aeb1df146756 | 548 | |
mbed_official | 76:aeb1df146756 | 549 | /** |
mbed_official | 76:aeb1df146756 | 550 | * @brief Returns the most recent received data by the USARTx peripheral. |
mbed_official | 76:aeb1df146756 | 551 | * @param USARTx: Select the USART peripheral. |
mbed_official | 76:aeb1df146756 | 552 | * This parameter can be one of the following values: |
mbed_official | 76:aeb1df146756 | 553 | * USART1, USART2, USART3, UART4 or UART5. |
mbed_official | 76:aeb1df146756 | 554 | * @retval The received data. |
mbed_official | 76:aeb1df146756 | 555 | */ |
mbed_official | 76:aeb1df146756 | 556 | uint16_t USART_ReceiveData(USART_TypeDef* USARTx) |
mbed_official | 76:aeb1df146756 | 557 | { |
mbed_official | 76:aeb1df146756 | 558 | /* Check the parameters */ |
mbed_official | 76:aeb1df146756 | 559 | assert_param(IS_USART_ALL_PERIPH(USARTx)); |
mbed_official | 76:aeb1df146756 | 560 | |
mbed_official | 76:aeb1df146756 | 561 | /* Receive Data */ |
mbed_official | 76:aeb1df146756 | 562 | return (uint16_t)(USARTx->DR & (uint16_t)0x01FF); |
mbed_official | 76:aeb1df146756 | 563 | } |
mbed_official | 76:aeb1df146756 | 564 | |
mbed_official | 76:aeb1df146756 | 565 | /** |
mbed_official | 76:aeb1df146756 | 566 | * @} |
mbed_official | 76:aeb1df146756 | 567 | */ |
mbed_official | 76:aeb1df146756 | 568 | |
mbed_official | 76:aeb1df146756 | 569 | /** @defgroup USART_Group3 MultiProcessor Communication functions |
mbed_official | 76:aeb1df146756 | 570 | * @brief Multi-Processor Communication functions |
mbed_official | 76:aeb1df146756 | 571 | * |
mbed_official | 76:aeb1df146756 | 572 | @verbatim |
mbed_official | 76:aeb1df146756 | 573 | =============================================================================== |
mbed_official | 76:aeb1df146756 | 574 | ##### Multi-Processor Communication functions ##### |
mbed_official | 76:aeb1df146756 | 575 | =============================================================================== |
mbed_official | 76:aeb1df146756 | 576 | [..] This subsection provides a set of functions allowing to manage the USART |
mbed_official | 76:aeb1df146756 | 577 | multiprocessor communication. |
mbed_official | 76:aeb1df146756 | 578 | [..] For instance one of the USARTs can be the master, its TX output is |
mbed_official | 76:aeb1df146756 | 579 | connected to the RX input of the other USART. The others are slaves, |
mbed_official | 76:aeb1df146756 | 580 | their respective TX outputs are logically ANDed together and connected |
mbed_official | 76:aeb1df146756 | 581 | to the RX input of the master. USART multiprocessor communication is |
mbed_official | 76:aeb1df146756 | 582 | possible through the following procedure: |
mbed_official | 76:aeb1df146756 | 583 | (#) Program the Baud rate, Word length = 9 bits, Stop bits, Parity, |
mbed_official | 76:aeb1df146756 | 584 | Mode transmitter or Mode receiver and hardware flow control values |
mbed_official | 76:aeb1df146756 | 585 | using the USART_Init() function. |
mbed_official | 76:aeb1df146756 | 586 | (#) Configures the USART address using the USART_SetAddress() function. |
mbed_official | 76:aeb1df146756 | 587 | (#) Configures the wake up methode (USART_WakeUp_IdleLine or |
mbed_official | 76:aeb1df146756 | 588 | USART_WakeUp_AddressMark) using USART_WakeUpConfig() function only |
mbed_official | 76:aeb1df146756 | 589 | for the slaves. |
mbed_official | 76:aeb1df146756 | 590 | (#) Enable the USART using the USART_Cmd() function. |
mbed_official | 76:aeb1df146756 | 591 | (#) Enter the USART slaves in mute mode using USART_ReceiverWakeUpCmd() |
mbed_official | 76:aeb1df146756 | 592 | function. |
mbed_official | 76:aeb1df146756 | 593 | |
mbed_official | 76:aeb1df146756 | 594 | [..] The USART Slave exit from mute mode when receive the wake up condition. |
mbed_official | 76:aeb1df146756 | 595 | |
mbed_official | 76:aeb1df146756 | 596 | @endverbatim |
mbed_official | 76:aeb1df146756 | 597 | * @{ |
mbed_official | 76:aeb1df146756 | 598 | */ |
mbed_official | 76:aeb1df146756 | 599 | |
mbed_official | 76:aeb1df146756 | 600 | /** |
mbed_official | 76:aeb1df146756 | 601 | * @brief Sets the address of the USART node. |
mbed_official | 76:aeb1df146756 | 602 | * @param USARTx: Select the USART peripheral. |
mbed_official | 76:aeb1df146756 | 603 | * This parameter can be one of the following values: |
mbed_official | 76:aeb1df146756 | 604 | * USART1, USART2, USART3, UART4 or UART5. |
mbed_official | 76:aeb1df146756 | 605 | * @param USART_Address: Indicates the address of the USART node. |
mbed_official | 76:aeb1df146756 | 606 | * @retval None |
mbed_official | 76:aeb1df146756 | 607 | */ |
mbed_official | 76:aeb1df146756 | 608 | void USART_SetAddress(USART_TypeDef* USARTx, uint8_t USART_Address) |
mbed_official | 76:aeb1df146756 | 609 | { |
mbed_official | 76:aeb1df146756 | 610 | /* Check the parameters */ |
mbed_official | 76:aeb1df146756 | 611 | assert_param(IS_USART_ALL_PERIPH(USARTx)); |
mbed_official | 76:aeb1df146756 | 612 | assert_param(IS_USART_ADDRESS(USART_Address)); |
mbed_official | 76:aeb1df146756 | 613 | |
mbed_official | 76:aeb1df146756 | 614 | /* Clear the USART address */ |
mbed_official | 76:aeb1df146756 | 615 | USARTx->CR2 &= (uint16_t)~((uint16_t)USART_CR2_ADD); |
mbed_official | 76:aeb1df146756 | 616 | /* Set the USART address node */ |
mbed_official | 76:aeb1df146756 | 617 | USARTx->CR2 |= USART_Address; |
mbed_official | 76:aeb1df146756 | 618 | } |
mbed_official | 76:aeb1df146756 | 619 | |
mbed_official | 76:aeb1df146756 | 620 | /** |
mbed_official | 76:aeb1df146756 | 621 | * @brief Determines if the USART is in mute mode or not. |
mbed_official | 76:aeb1df146756 | 622 | * @param USARTx: Select the USART peripheral. |
mbed_official | 76:aeb1df146756 | 623 | * This parameter can be one of the following values: |
mbed_official | 76:aeb1df146756 | 624 | * USART1, USART2, USART3, UART4 or UART5. |
mbed_official | 76:aeb1df146756 | 625 | * @param NewState: new state of the USART mute mode. |
mbed_official | 76:aeb1df146756 | 626 | * This parameter can be: ENABLE or DISABLE. |
mbed_official | 76:aeb1df146756 | 627 | * @retval None |
mbed_official | 76:aeb1df146756 | 628 | */ |
mbed_official | 76:aeb1df146756 | 629 | void USART_ReceiverWakeUpCmd(USART_TypeDef* USARTx, FunctionalState NewState) |
mbed_official | 76:aeb1df146756 | 630 | { |
mbed_official | 76:aeb1df146756 | 631 | /* Check the parameters */ |
mbed_official | 76:aeb1df146756 | 632 | assert_param(IS_USART_ALL_PERIPH(USARTx)); |
mbed_official | 76:aeb1df146756 | 633 | assert_param(IS_FUNCTIONAL_STATE(NewState)); |
mbed_official | 76:aeb1df146756 | 634 | |
mbed_official | 76:aeb1df146756 | 635 | if (NewState != DISABLE) |
mbed_official | 76:aeb1df146756 | 636 | { |
mbed_official | 76:aeb1df146756 | 637 | /* Enable the USART mute mode by setting the RWU bit in the CR1 register */ |
mbed_official | 76:aeb1df146756 | 638 | USARTx->CR1 |= USART_CR1_RWU; |
mbed_official | 76:aeb1df146756 | 639 | } |
mbed_official | 76:aeb1df146756 | 640 | else |
mbed_official | 76:aeb1df146756 | 641 | { |
mbed_official | 76:aeb1df146756 | 642 | /* Disable the USART mute mode by clearing the RWU bit in the CR1 register */ |
mbed_official | 76:aeb1df146756 | 643 | USARTx->CR1 &= (uint16_t)~((uint16_t)USART_CR1_RWU); |
mbed_official | 76:aeb1df146756 | 644 | } |
mbed_official | 76:aeb1df146756 | 645 | } |
mbed_official | 76:aeb1df146756 | 646 | /** |
mbed_official | 76:aeb1df146756 | 647 | * @brief Selects the USART WakeUp method. |
mbed_official | 76:aeb1df146756 | 648 | * @param USARTx: Select the USART peripheral. |
mbed_official | 76:aeb1df146756 | 649 | * This parameter can be one of the following values: |
mbed_official | 76:aeb1df146756 | 650 | * USART1, USART2, USART3, UART4 or UART5. |
mbed_official | 76:aeb1df146756 | 651 | * @param USART_WakeUp: specifies the USART wakeup method. |
mbed_official | 76:aeb1df146756 | 652 | * This parameter can be one of the following values: |
mbed_official | 76:aeb1df146756 | 653 | * @arg USART_WakeUp_IdleLine: WakeUp by an idle line detection. |
mbed_official | 76:aeb1df146756 | 654 | * @arg USART_WakeUp_AddressMark: WakeUp by an address mark. |
mbed_official | 76:aeb1df146756 | 655 | * @retval None. |
mbed_official | 76:aeb1df146756 | 656 | */ |
mbed_official | 76:aeb1df146756 | 657 | void USART_WakeUpConfig(USART_TypeDef* USARTx, uint16_t USART_WakeUp) |
mbed_official | 76:aeb1df146756 | 658 | { |
mbed_official | 76:aeb1df146756 | 659 | /* Check the parameters */ |
mbed_official | 76:aeb1df146756 | 660 | assert_param(IS_USART_ALL_PERIPH(USARTx)); |
mbed_official | 76:aeb1df146756 | 661 | assert_param(IS_USART_WAKEUP(USART_WakeUp)); |
mbed_official | 76:aeb1df146756 | 662 | |
mbed_official | 76:aeb1df146756 | 663 | USARTx->CR1 &= (uint16_t)~((uint16_t)USART_CR1_WAKE); |
mbed_official | 76:aeb1df146756 | 664 | USARTx->CR1 |= USART_WakeUp; |
mbed_official | 76:aeb1df146756 | 665 | } |
mbed_official | 76:aeb1df146756 | 666 | |
mbed_official | 76:aeb1df146756 | 667 | /** |
mbed_official | 76:aeb1df146756 | 668 | * @} |
mbed_official | 76:aeb1df146756 | 669 | */ |
mbed_official | 76:aeb1df146756 | 670 | |
mbed_official | 76:aeb1df146756 | 671 | /** @defgroup USART_Group4 LIN mode functions |
mbed_official | 76:aeb1df146756 | 672 | * @brief LIN mode functions |
mbed_official | 76:aeb1df146756 | 673 | * |
mbed_official | 76:aeb1df146756 | 674 | @verbatim |
mbed_official | 76:aeb1df146756 | 675 | =============================================================================== |
mbed_official | 76:aeb1df146756 | 676 | ##### LIN mode functions ##### |
mbed_official | 76:aeb1df146756 | 677 | =============================================================================== |
mbed_official | 76:aeb1df146756 | 678 | [..] This subsection provides a set of functions allowing to manage the USART |
mbed_official | 76:aeb1df146756 | 679 | LIN Mode communication. |
mbed_official | 76:aeb1df146756 | 680 | [..] In LIN mode, 8-bit data format with 1 stop bit is required in accordance |
mbed_official | 76:aeb1df146756 | 681 | with the LIN standard. |
mbed_official | 76:aeb1df146756 | 682 | [..] Only this LIN Feature is supported by the USART IP: |
mbed_official | 76:aeb1df146756 | 683 | (+) LIN Master Synchronous Break send capability and LIN slave break |
mbed_official | 76:aeb1df146756 | 684 | detection capability : 13-bit break generation and 10/11 bit break |
mbed_official | 76:aeb1df146756 | 685 | detection. |
mbed_official | 76:aeb1df146756 | 686 | [..] USART LIN Master transmitter communication is possible through the |
mbed_official | 76:aeb1df146756 | 687 | following procedure: |
mbed_official | 76:aeb1df146756 | 688 | (#) Program the Baud rate, Word length = 8bits, Stop bits = 1bit, Parity, |
mbed_official | 76:aeb1df146756 | 689 | Mode transmitter or Mode receiver and hardware flow control values |
mbed_official | 76:aeb1df146756 | 690 | using the USART_Init() function. |
mbed_official | 76:aeb1df146756 | 691 | (#) Enable the USART using the USART_Cmd() function. |
mbed_official | 76:aeb1df146756 | 692 | (#) Enable the LIN mode using the USART_LINCmd() function. |
mbed_official | 76:aeb1df146756 | 693 | (#) Send the break character using USART_SendBreak() function. |
mbed_official | 76:aeb1df146756 | 694 | [..] USART LIN Master receiver communication is possible through the |
mbed_official | 76:aeb1df146756 | 695 | following procedure: |
mbed_official | 76:aeb1df146756 | 696 | (#) Program the Baud rate, Word length = 8bits, Stop bits = 1bit, Parity, |
mbed_official | 76:aeb1df146756 | 697 | Mode transmitter or Mode receiver and hardware flow control values |
mbed_official | 76:aeb1df146756 | 698 | using the USART_Init() function. |
mbed_official | 76:aeb1df146756 | 699 | (#) Enable the USART using the USART_Cmd() function. |
mbed_official | 76:aeb1df146756 | 700 | (#) Configures the break detection length |
mbed_official | 76:aeb1df146756 | 701 | using the USART_LINBreakDetectLengthConfig() function. |
mbed_official | 76:aeb1df146756 | 702 | (#) Enable the LIN mode using the USART_LINCmd() function. |
mbed_official | 76:aeb1df146756 | 703 | -@- In LIN mode, the following bits must be kept cleared: |
mbed_official | 76:aeb1df146756 | 704 | (+@) CLKEN in the USART_CR2 register. |
mbed_official | 76:aeb1df146756 | 705 | (+@) STOP[1:0], SCEN, HDSEL and IREN in the USART_CR3 register. |
mbed_official | 76:aeb1df146756 | 706 | |
mbed_official | 76:aeb1df146756 | 707 | @endverbatim |
mbed_official | 76:aeb1df146756 | 708 | * @{ |
mbed_official | 76:aeb1df146756 | 709 | */ |
mbed_official | 76:aeb1df146756 | 710 | |
mbed_official | 76:aeb1df146756 | 711 | /** |
mbed_official | 76:aeb1df146756 | 712 | * @brief Sets the USART LIN Break detection length. |
mbed_official | 76:aeb1df146756 | 713 | * @param USARTx: Select the USART peripheral. |
mbed_official | 76:aeb1df146756 | 714 | * This parameter can be one of the following values: |
mbed_official | 76:aeb1df146756 | 715 | * USART1, USART2, USART3, UART4 or UART5. |
mbed_official | 76:aeb1df146756 | 716 | * @param USART_LINBreakDetectLength: specifies the LIN break detection length. |
mbed_official | 76:aeb1df146756 | 717 | * This parameter can be one of the following values: |
mbed_official | 76:aeb1df146756 | 718 | * @arg USART_LINBreakDetectLength_10b: 10-bit break detection. |
mbed_official | 76:aeb1df146756 | 719 | * @arg USART_LINBreakDetectLength_11b: 11-bit break detection. |
mbed_official | 76:aeb1df146756 | 720 | * @retval None. |
mbed_official | 76:aeb1df146756 | 721 | */ |
mbed_official | 76:aeb1df146756 | 722 | void USART_LINBreakDetectLengthConfig(USART_TypeDef* USARTx, uint16_t USART_LINBreakDetectLength) |
mbed_official | 76:aeb1df146756 | 723 | { |
mbed_official | 76:aeb1df146756 | 724 | /* Check the parameters */ |
mbed_official | 76:aeb1df146756 | 725 | assert_param(IS_USART_ALL_PERIPH(USARTx)); |
mbed_official | 76:aeb1df146756 | 726 | assert_param(IS_USART_LIN_BREAK_DETECT_LENGTH(USART_LINBreakDetectLength)); |
mbed_official | 76:aeb1df146756 | 727 | |
mbed_official | 76:aeb1df146756 | 728 | USARTx->CR2 &= (uint16_t)~((uint16_t)USART_CR2_LBDL); |
mbed_official | 76:aeb1df146756 | 729 | USARTx->CR2 |= USART_LINBreakDetectLength; |
mbed_official | 76:aeb1df146756 | 730 | } |
mbed_official | 76:aeb1df146756 | 731 | |
mbed_official | 76:aeb1df146756 | 732 | /** |
mbed_official | 76:aeb1df146756 | 733 | * @brief Enables or disables the USART's LIN mode. |
mbed_official | 76:aeb1df146756 | 734 | * @param USARTx: Select the USART peripheral. |
mbed_official | 76:aeb1df146756 | 735 | * This parameter can be one of the following values: |
mbed_official | 76:aeb1df146756 | 736 | * USART1, USART2, USART3, UART4 or UART5. |
mbed_official | 76:aeb1df146756 | 737 | * @param NewState: new state of the USART LIN mode. |
mbed_official | 76:aeb1df146756 | 738 | * This parameter can be: ENABLE or DISABLE. |
mbed_official | 76:aeb1df146756 | 739 | * @retval None. |
mbed_official | 76:aeb1df146756 | 740 | */ |
mbed_official | 76:aeb1df146756 | 741 | void USART_LINCmd(USART_TypeDef* USARTx, FunctionalState NewState) |
mbed_official | 76:aeb1df146756 | 742 | { |
mbed_official | 76:aeb1df146756 | 743 | /* Check the parameters */ |
mbed_official | 76:aeb1df146756 | 744 | assert_param(IS_USART_ALL_PERIPH(USARTx)); |
mbed_official | 76:aeb1df146756 | 745 | assert_param(IS_FUNCTIONAL_STATE(NewState)); |
mbed_official | 76:aeb1df146756 | 746 | |
mbed_official | 76:aeb1df146756 | 747 | if (NewState != DISABLE) |
mbed_official | 76:aeb1df146756 | 748 | { |
mbed_official | 76:aeb1df146756 | 749 | /* Enable the LIN mode by setting the LINEN bit in the CR2 register */ |
mbed_official | 76:aeb1df146756 | 750 | USARTx->CR2 |= USART_CR2_LINEN; |
mbed_official | 76:aeb1df146756 | 751 | } |
mbed_official | 76:aeb1df146756 | 752 | else |
mbed_official | 76:aeb1df146756 | 753 | { |
mbed_official | 76:aeb1df146756 | 754 | /* Disable the LIN mode by clearing the LINEN bit in the CR2 register */ |
mbed_official | 76:aeb1df146756 | 755 | USARTx->CR2 &= (uint16_t)~((uint16_t)USART_CR2_LINEN); |
mbed_official | 76:aeb1df146756 | 756 | } |
mbed_official | 76:aeb1df146756 | 757 | } |
mbed_official | 76:aeb1df146756 | 758 | |
mbed_official | 76:aeb1df146756 | 759 | /** |
mbed_official | 76:aeb1df146756 | 760 | * @brief Transmits break characters. |
mbed_official | 76:aeb1df146756 | 761 | * @param USARTx: Select the USART peripheral. |
mbed_official | 76:aeb1df146756 | 762 | * This parameter can be one of the following values: |
mbed_official | 76:aeb1df146756 | 763 | * USART1, USART2, USART3, UART4 or UART5. |
mbed_official | 76:aeb1df146756 | 764 | * @retval None. |
mbed_official | 76:aeb1df146756 | 765 | */ |
mbed_official | 76:aeb1df146756 | 766 | void USART_SendBreak(USART_TypeDef* USARTx) |
mbed_official | 76:aeb1df146756 | 767 | { |
mbed_official | 76:aeb1df146756 | 768 | /* Check the parameters */ |
mbed_official | 76:aeb1df146756 | 769 | assert_param(IS_USART_ALL_PERIPH(USARTx)); |
mbed_official | 76:aeb1df146756 | 770 | |
mbed_official | 76:aeb1df146756 | 771 | /* Send break characters */ |
mbed_official | 76:aeb1df146756 | 772 | USARTx->CR1 |= USART_CR1_SBK; |
mbed_official | 76:aeb1df146756 | 773 | } |
mbed_official | 76:aeb1df146756 | 774 | |
mbed_official | 76:aeb1df146756 | 775 | /** |
mbed_official | 76:aeb1df146756 | 776 | * @} |
mbed_official | 76:aeb1df146756 | 777 | */ |
mbed_official | 76:aeb1df146756 | 778 | |
mbed_official | 76:aeb1df146756 | 779 | /** @defgroup USART_Group5 Halfduplex mode function |
mbed_official | 76:aeb1df146756 | 780 | * @brief Half-duplex mode function |
mbed_official | 76:aeb1df146756 | 781 | * |
mbed_official | 76:aeb1df146756 | 782 | @verbatim |
mbed_official | 76:aeb1df146756 | 783 | =============================================================================== |
mbed_official | 76:aeb1df146756 | 784 | ##### Half-duplex mode function ##### |
mbed_official | 76:aeb1df146756 | 785 | =============================================================================== |
mbed_official | 76:aeb1df146756 | 786 | [..] This subsection provides a set of functions allowing to manage the USART |
mbed_official | 76:aeb1df146756 | 787 | Half-duplex communication. |
mbed_official | 76:aeb1df146756 | 788 | [..] The USART can be configured to follow a single-wire half-duplex protocol |
mbed_official | 76:aeb1df146756 | 789 | where the TX and RX lines are internally connected. |
mbed_official | 76:aeb1df146756 | 790 | [..] USART Half duplex communication is possible through the following procedure: |
mbed_official | 76:aeb1df146756 | 791 | (#) Program the Baud rate, Word length, Stop bits, Parity, Mode transmitter |
mbed_official | 76:aeb1df146756 | 792 | or Mode receiver and hardware flow control values using the USART_Init() |
mbed_official | 76:aeb1df146756 | 793 | function. |
mbed_official | 76:aeb1df146756 | 794 | (#) Configures the USART address using the USART_SetAddress() function. |
mbed_official | 76:aeb1df146756 | 795 | (#) Enable the USART using the USART_Cmd() function. |
mbed_official | 76:aeb1df146756 | 796 | (#) Enable the half duplex mode using USART_HalfDuplexCmd() function. |
mbed_official | 76:aeb1df146756 | 797 | -@- The RX pin is no longer used. |
mbed_official | 76:aeb1df146756 | 798 | -@- In Half-duplex mode the following bits must be kept cleared: |
mbed_official | 76:aeb1df146756 | 799 | (+@) LINEN and CLKEN bits in the USART_CR2 register. |
mbed_official | 76:aeb1df146756 | 800 | (+@) SCEN and IREN bits in the USART_CR3 register. |
mbed_official | 76:aeb1df146756 | 801 | |
mbed_official | 76:aeb1df146756 | 802 | @endverbatim |
mbed_official | 76:aeb1df146756 | 803 | * @{ |
mbed_official | 76:aeb1df146756 | 804 | */ |
mbed_official | 76:aeb1df146756 | 805 | |
mbed_official | 76:aeb1df146756 | 806 | /** |
mbed_official | 76:aeb1df146756 | 807 | * @brief Enables or disables the USART's Half Duplex communication. |
mbed_official | 76:aeb1df146756 | 808 | * @param USARTx: Select the USART peripheral. |
mbed_official | 76:aeb1df146756 | 809 | * This parameter can be one of the following values: |
mbed_official | 76:aeb1df146756 | 810 | * USART1, USART2, USART3, UART4 or UART5. |
mbed_official | 76:aeb1df146756 | 811 | * @param NewState: new state of the USART Communication. |
mbed_official | 76:aeb1df146756 | 812 | * This parameter can be: ENABLE or DISABLE. |
mbed_official | 76:aeb1df146756 | 813 | * @retval None |
mbed_official | 76:aeb1df146756 | 814 | */ |
mbed_official | 76:aeb1df146756 | 815 | void USART_HalfDuplexCmd(USART_TypeDef* USARTx, FunctionalState NewState) |
mbed_official | 76:aeb1df146756 | 816 | { |
mbed_official | 76:aeb1df146756 | 817 | /* Check the parameters */ |
mbed_official | 76:aeb1df146756 | 818 | assert_param(IS_USART_ALL_PERIPH(USARTx)); |
mbed_official | 76:aeb1df146756 | 819 | assert_param(IS_FUNCTIONAL_STATE(NewState)); |
mbed_official | 76:aeb1df146756 | 820 | |
mbed_official | 76:aeb1df146756 | 821 | if (NewState != DISABLE) |
mbed_official | 76:aeb1df146756 | 822 | { |
mbed_official | 76:aeb1df146756 | 823 | /* Enable the Half-Duplex mode by setting the HDSEL bit in the CR3 register */ |
mbed_official | 76:aeb1df146756 | 824 | USARTx->CR3 |= USART_CR3_HDSEL; |
mbed_official | 76:aeb1df146756 | 825 | } |
mbed_official | 76:aeb1df146756 | 826 | else |
mbed_official | 76:aeb1df146756 | 827 | { |
mbed_official | 76:aeb1df146756 | 828 | /* Disable the Half-Duplex mode by clearing the HDSEL bit in the CR3 register */ |
mbed_official | 76:aeb1df146756 | 829 | USARTx->CR3 &= (uint16_t)~((uint16_t)USART_CR3_HDSEL); |
mbed_official | 76:aeb1df146756 | 830 | } |
mbed_official | 76:aeb1df146756 | 831 | } |
mbed_official | 76:aeb1df146756 | 832 | |
mbed_official | 76:aeb1df146756 | 833 | /** |
mbed_official | 76:aeb1df146756 | 834 | * @} |
mbed_official | 76:aeb1df146756 | 835 | */ |
mbed_official | 76:aeb1df146756 | 836 | |
mbed_official | 76:aeb1df146756 | 837 | |
mbed_official | 76:aeb1df146756 | 838 | /** @defgroup USART_Group6 Smartcard mode functions |
mbed_official | 76:aeb1df146756 | 839 | * @brief Smartcard mode functions |
mbed_official | 76:aeb1df146756 | 840 | * |
mbed_official | 76:aeb1df146756 | 841 | @verbatim |
mbed_official | 76:aeb1df146756 | 842 | =============================================================================== |
mbed_official | 76:aeb1df146756 | 843 | ##### Smartcard mode functions ##### |
mbed_official | 76:aeb1df146756 | 844 | =============================================================================== |
mbed_official | 76:aeb1df146756 | 845 | [..] This subsection provides a set of functions allowing to manage the USART |
mbed_official | 76:aeb1df146756 | 846 | Smartcard communication. |
mbed_official | 76:aeb1df146756 | 847 | [..] The Smartcard interface is designed to support asynchronous protocol |
mbed_official | 76:aeb1df146756 | 848 | Smartcards as defined in the ISO 7816-3 standard. The USART can provide |
mbed_official | 76:aeb1df146756 | 849 | a clock to the smartcard through the SCLK output. In smartcard mode, |
mbed_official | 76:aeb1df146756 | 850 | SCLK is not associated to the communication but is simply derived from |
mbed_official | 76:aeb1df146756 | 851 | the internal peripheral input clock through a 5-bit prescaler. |
mbed_official | 76:aeb1df146756 | 852 | [..] Smartcard communication is possible through the following procedure: |
mbed_official | 76:aeb1df146756 | 853 | (#) Configures the Smartcard Prsecaler using the USART_SetPrescaler() |
mbed_official | 76:aeb1df146756 | 854 | function. |
mbed_official | 76:aeb1df146756 | 855 | (#) Configures the Smartcard Guard Time using the USART_SetGuardTime() |
mbed_official | 76:aeb1df146756 | 856 | function. |
mbed_official | 76:aeb1df146756 | 857 | (#) Program the USART clock using the USART_ClockInit() function as following: |
mbed_official | 76:aeb1df146756 | 858 | (++) USART Clock enabled. |
mbed_official | 76:aeb1df146756 | 859 | (++) USART CPOL Low. |
mbed_official | 76:aeb1df146756 | 860 | (++) USART CPHA on first edge. |
mbed_official | 76:aeb1df146756 | 861 | (++) USART Last Bit Clock Enabled. |
mbed_official | 76:aeb1df146756 | 862 | (#) Program the Smartcard interface using the USART_Init() function as |
mbed_official | 76:aeb1df146756 | 863 | following: |
mbed_official | 76:aeb1df146756 | 864 | (++) Word Length = 9 Bits. |
mbed_official | 76:aeb1df146756 | 865 | (++) 1.5 Stop Bit. |
mbed_official | 76:aeb1df146756 | 866 | (++) Even parity. |
mbed_official | 76:aeb1df146756 | 867 | (++) BaudRate = 12096 baud. |
mbed_official | 76:aeb1df146756 | 868 | (++) Hardware flow control disabled (RTS and CTS signals). |
mbed_official | 76:aeb1df146756 | 869 | (++) Tx and Rx enabled |
mbed_official | 76:aeb1df146756 | 870 | (#) Optionally you can enable the parity error interrupt using |
mbed_official | 76:aeb1df146756 | 871 | the USART_ITConfig() function. |
mbed_official | 76:aeb1df146756 | 872 | (#) Enable the USART using the USART_Cmd() function. |
mbed_official | 76:aeb1df146756 | 873 | (#) Enable the Smartcard NACK using the USART_SmartCardNACKCmd() function. |
mbed_official | 76:aeb1df146756 | 874 | (#) Enable the Smartcard interface using the USART_SmartCardCmd() function. |
mbed_official | 76:aeb1df146756 | 875 | [..] |
mbed_official | 76:aeb1df146756 | 876 | Please refer to the ISO 7816-3 specification for more details. |
mbed_official | 76:aeb1df146756 | 877 | [..] |
mbed_official | 76:aeb1df146756 | 878 | (@) It is also possible to choose 0.5 stop bit for receiving but it is |
mbed_official | 76:aeb1df146756 | 879 | recommended to use 1.5 stop bits for both transmitting and receiving |
mbed_official | 76:aeb1df146756 | 880 | to avoid switching between the two configurations. |
mbed_official | 76:aeb1df146756 | 881 | (@) In smartcard mode, the following bits must be kept cleared: |
mbed_official | 76:aeb1df146756 | 882 | (+@) LINEN bit in the USART_CR2 register. |
mbed_official | 76:aeb1df146756 | 883 | (+@) HDSEL and IREN bits in the USART_CR3 register. |
mbed_official | 76:aeb1df146756 | 884 | |
mbed_official | 76:aeb1df146756 | 885 | @endverbatim |
mbed_official | 76:aeb1df146756 | 886 | * @{ |
mbed_official | 76:aeb1df146756 | 887 | */ |
mbed_official | 76:aeb1df146756 | 888 | |
mbed_official | 76:aeb1df146756 | 889 | /** |
mbed_official | 76:aeb1df146756 | 890 | * @brief Sets the specified USART guard time. |
mbed_official | 76:aeb1df146756 | 891 | * @param USARTx: Select the USART peripheral. |
mbed_official | 76:aeb1df146756 | 892 | * This parameter can be one of the following values: |
mbed_official | 76:aeb1df146756 | 893 | * USART1, USART2 or USART3. |
mbed_official | 76:aeb1df146756 | 894 | * @param USART_GuardTime: specifies the guard time. |
mbed_official | 76:aeb1df146756 | 895 | * @retval None. |
mbed_official | 76:aeb1df146756 | 896 | */ |
mbed_official | 76:aeb1df146756 | 897 | void USART_SetGuardTime(USART_TypeDef* USARTx, uint8_t USART_GuardTime) |
mbed_official | 76:aeb1df146756 | 898 | { |
mbed_official | 76:aeb1df146756 | 899 | /* Check the parameters */ |
mbed_official | 76:aeb1df146756 | 900 | assert_param(IS_USART_123_PERIPH(USARTx)); |
mbed_official | 76:aeb1df146756 | 901 | |
mbed_official | 76:aeb1df146756 | 902 | /* Clear the USART Guard time */ |
mbed_official | 76:aeb1df146756 | 903 | USARTx->GTPR &= USART_GTPR_PSC; |
mbed_official | 76:aeb1df146756 | 904 | /* Set the USART guard time */ |
mbed_official | 76:aeb1df146756 | 905 | USARTx->GTPR |= (uint16_t)((uint16_t)USART_GuardTime << 0x08); |
mbed_official | 76:aeb1df146756 | 906 | } |
mbed_official | 76:aeb1df146756 | 907 | |
mbed_official | 76:aeb1df146756 | 908 | /** |
mbed_official | 76:aeb1df146756 | 909 | * @brief Enables or disables the USART's Smart Card mode. |
mbed_official | 76:aeb1df146756 | 910 | * @param USARTx: Select the USART peripheral. |
mbed_official | 76:aeb1df146756 | 911 | * This parameter can be one of the following values: |
mbed_official | 76:aeb1df146756 | 912 | * USART1, USART2 or USART3. |
mbed_official | 76:aeb1df146756 | 913 | * @param NewState: new state of the Smart Card mode. |
mbed_official | 76:aeb1df146756 | 914 | * This parameter can be: ENABLE or DISABLE. |
mbed_official | 76:aeb1df146756 | 915 | * @retval None |
mbed_official | 76:aeb1df146756 | 916 | */ |
mbed_official | 76:aeb1df146756 | 917 | void USART_SmartCardCmd(USART_TypeDef* USARTx, FunctionalState NewState) |
mbed_official | 76:aeb1df146756 | 918 | { |
mbed_official | 76:aeb1df146756 | 919 | /* Check the parameters */ |
mbed_official | 76:aeb1df146756 | 920 | assert_param(IS_USART_123_PERIPH(USARTx)); |
mbed_official | 76:aeb1df146756 | 921 | assert_param(IS_FUNCTIONAL_STATE(NewState)); |
mbed_official | 76:aeb1df146756 | 922 | if (NewState != DISABLE) |
mbed_official | 76:aeb1df146756 | 923 | { |
mbed_official | 76:aeb1df146756 | 924 | /* Enable the SC mode by setting the SCEN bit in the CR3 register */ |
mbed_official | 76:aeb1df146756 | 925 | USARTx->CR3 |= USART_CR3_SCEN; |
mbed_official | 76:aeb1df146756 | 926 | } |
mbed_official | 76:aeb1df146756 | 927 | else |
mbed_official | 76:aeb1df146756 | 928 | { |
mbed_official | 76:aeb1df146756 | 929 | /* Disable the SC mode by clearing the SCEN bit in the CR3 register */ |
mbed_official | 76:aeb1df146756 | 930 | USARTx->CR3 &= (uint16_t)~((uint16_t)USART_CR3_SCEN); |
mbed_official | 76:aeb1df146756 | 931 | } |
mbed_official | 76:aeb1df146756 | 932 | } |
mbed_official | 76:aeb1df146756 | 933 | |
mbed_official | 76:aeb1df146756 | 934 | /** |
mbed_official | 76:aeb1df146756 | 935 | * @brief Enables or disables NACK transmission. |
mbed_official | 76:aeb1df146756 | 936 | * @param USARTx: Select the USART peripheral. |
mbed_official | 76:aeb1df146756 | 937 | * This parameter can be one of the following values: |
mbed_official | 76:aeb1df146756 | 938 | * USART1, USART2 or USART3. |
mbed_official | 76:aeb1df146756 | 939 | * @param NewState: new state of the NACK transmission. |
mbed_official | 76:aeb1df146756 | 940 | * This parameter can be: ENABLE or DISABLE. |
mbed_official | 76:aeb1df146756 | 941 | * @retval None. |
mbed_official | 76:aeb1df146756 | 942 | */ |
mbed_official | 76:aeb1df146756 | 943 | void USART_SmartCardNACKCmd(USART_TypeDef* USARTx, FunctionalState NewState) |
mbed_official | 76:aeb1df146756 | 944 | { |
mbed_official | 76:aeb1df146756 | 945 | /* Check the parameters */ |
mbed_official | 76:aeb1df146756 | 946 | assert_param(IS_USART_123_PERIPH(USARTx)); |
mbed_official | 76:aeb1df146756 | 947 | assert_param(IS_FUNCTIONAL_STATE(NewState)); |
mbed_official | 76:aeb1df146756 | 948 | if (NewState != DISABLE) |
mbed_official | 76:aeb1df146756 | 949 | { |
mbed_official | 76:aeb1df146756 | 950 | /* Enable the NACK transmission by setting the NACK bit in the CR3 register */ |
mbed_official | 76:aeb1df146756 | 951 | USARTx->CR3 |= USART_CR3_NACK; |
mbed_official | 76:aeb1df146756 | 952 | } |
mbed_official | 76:aeb1df146756 | 953 | else |
mbed_official | 76:aeb1df146756 | 954 | { |
mbed_official | 76:aeb1df146756 | 955 | /* Disable the NACK transmission by clearing the NACK bit in the CR3 register */ |
mbed_official | 76:aeb1df146756 | 956 | USARTx->CR3 &= (uint16_t)~((uint16_t)USART_CR3_NACK); |
mbed_official | 76:aeb1df146756 | 957 | } |
mbed_official | 76:aeb1df146756 | 958 | } |
mbed_official | 76:aeb1df146756 | 959 | |
mbed_official | 76:aeb1df146756 | 960 | /** |
mbed_official | 76:aeb1df146756 | 961 | * @} |
mbed_official | 76:aeb1df146756 | 962 | */ |
mbed_official | 76:aeb1df146756 | 963 | |
mbed_official | 76:aeb1df146756 | 964 | /** @defgroup USART_Group7 IrDA mode functions |
mbed_official | 76:aeb1df146756 | 965 | * @brief IrDA mode functions |
mbed_official | 76:aeb1df146756 | 966 | * |
mbed_official | 76:aeb1df146756 | 967 | @verbatim |
mbed_official | 76:aeb1df146756 | 968 | =============================================================================== |
mbed_official | 76:aeb1df146756 | 969 | ##### IrDA mode functions ##### |
mbed_official | 76:aeb1df146756 | 970 | =============================================================================== |
mbed_official | 76:aeb1df146756 | 971 | [..] This subsection provides a set of functions allowing to manage the USART |
mbed_official | 76:aeb1df146756 | 972 | IrDA communication. |
mbed_official | 76:aeb1df146756 | 973 | [..] IrDA is a half duplex communication protocol. If the Transmitter is busy, |
mbed_official | 76:aeb1df146756 | 974 | any data on the IrDA receive line will be ignored by the IrDA decoder |
mbed_official | 76:aeb1df146756 | 975 | and if the Receiver is busy, data on the TX from the USART to IrDA will |
mbed_official | 76:aeb1df146756 | 976 | not be encoded by IrDA. While receiving data, transmission should be |
mbed_official | 76:aeb1df146756 | 977 | avoided as the data to be transmitted could be corrupted. |
mbed_official | 76:aeb1df146756 | 978 | |
mbed_official | 76:aeb1df146756 | 979 | [..] IrDA communication is possible through the following procedure: |
mbed_official | 76:aeb1df146756 | 980 | (#) Program the Baud rate, Word length = 8 bits, Stop bits, Parity, |
mbed_official | 76:aeb1df146756 | 981 | Transmitter/Receiver modes and hardware flow control values using |
mbed_official | 76:aeb1df146756 | 982 | the USART_Init() function. |
mbed_official | 76:aeb1df146756 | 983 | (#) Enable the USART using the USART_Cmd() function. |
mbed_official | 76:aeb1df146756 | 984 | (#) Configures the IrDA pulse width by configuring the prescaler using |
mbed_official | 76:aeb1df146756 | 985 | the USART_SetPrescaler() function. |
mbed_official | 76:aeb1df146756 | 986 | (#) Configures the IrDA USART_IrDAMode_LowPower or USART_IrDAMode_Normal |
mbed_official | 76:aeb1df146756 | 987 | mode using the USART_IrDAConfig() function. |
mbed_official | 76:aeb1df146756 | 988 | (#) Enable the IrDA using the USART_IrDACmd() function. |
mbed_official | 76:aeb1df146756 | 989 | |
mbed_official | 76:aeb1df146756 | 990 | [..] |
mbed_official | 76:aeb1df146756 | 991 | (@) A pulse of width less than two and greater than one PSC period(s) may or |
mbed_official | 76:aeb1df146756 | 992 | may not be rejected. |
mbed_official | 76:aeb1df146756 | 993 | (@) The receiver set up time should be managed by software. The IrDA physical |
mbed_official | 76:aeb1df146756 | 994 | layer specification specifies a minimum of 10 ms delay between |
mbed_official | 76:aeb1df146756 | 995 | transmission and reception (IrDA is a half duplex protocol). |
mbed_official | 76:aeb1df146756 | 996 | (@) In IrDA mode, the following bits must be kept cleared: |
mbed_official | 76:aeb1df146756 | 997 | (+@) LINEN, STOP and CLKEN bits in the USART_CR2 register. |
mbed_official | 76:aeb1df146756 | 998 | (+@) SCEN and HDSEL bits in the USART_CR3 register. |
mbed_official | 76:aeb1df146756 | 999 | |
mbed_official | 76:aeb1df146756 | 1000 | @endverbatim |
mbed_official | 76:aeb1df146756 | 1001 | * @{ |
mbed_official | 76:aeb1df146756 | 1002 | */ |
mbed_official | 76:aeb1df146756 | 1003 | |
mbed_official | 76:aeb1df146756 | 1004 | /** |
mbed_official | 76:aeb1df146756 | 1005 | * @brief Configures the USART's IrDA interface. |
mbed_official | 76:aeb1df146756 | 1006 | * @param USARTx: Select the USART peripheral. |
mbed_official | 76:aeb1df146756 | 1007 | * This parameter can be one of the following values: |
mbed_official | 76:aeb1df146756 | 1008 | * USART1, USART2, USART3, UART4 or UART5. |
mbed_official | 76:aeb1df146756 | 1009 | * @param USART_IrDAMode: specifies the IrDA mode. |
mbed_official | 76:aeb1df146756 | 1010 | * This parameter can be one of the following values: |
mbed_official | 76:aeb1df146756 | 1011 | * @arg USART_IrDAMode_LowPower: USART IrDA Low Power mode selected. |
mbed_official | 76:aeb1df146756 | 1012 | * @arg USART_IrDAMode_Normal: USART IrDA Normal mode selected. |
mbed_official | 76:aeb1df146756 | 1013 | * @retval None |
mbed_official | 76:aeb1df146756 | 1014 | */ |
mbed_official | 76:aeb1df146756 | 1015 | void USART_IrDAConfig(USART_TypeDef* USARTx, uint16_t USART_IrDAMode) |
mbed_official | 76:aeb1df146756 | 1016 | { |
mbed_official | 76:aeb1df146756 | 1017 | /* Check the parameters */ |
mbed_official | 76:aeb1df146756 | 1018 | assert_param(IS_USART_ALL_PERIPH(USARTx)); |
mbed_official | 76:aeb1df146756 | 1019 | assert_param(IS_USART_IRDA_MODE(USART_IrDAMode)); |
mbed_official | 76:aeb1df146756 | 1020 | |
mbed_official | 76:aeb1df146756 | 1021 | USARTx->CR3 &= (uint16_t)~((uint16_t)USART_CR3_IRLP); |
mbed_official | 76:aeb1df146756 | 1022 | USARTx->CR3 |= USART_IrDAMode; |
mbed_official | 76:aeb1df146756 | 1023 | } |
mbed_official | 76:aeb1df146756 | 1024 | |
mbed_official | 76:aeb1df146756 | 1025 | /** |
mbed_official | 76:aeb1df146756 | 1026 | * @brief Enables or disables the USART's IrDA interface. |
mbed_official | 76:aeb1df146756 | 1027 | * @param USARTx: Select the USART peripheral. |
mbed_official | 76:aeb1df146756 | 1028 | * This parameter can be one of the following values: |
mbed_official | 76:aeb1df146756 | 1029 | * USART1, USART2, USART3, UART4 or UART5. |
mbed_official | 76:aeb1df146756 | 1030 | * @param NewState: new state of the IrDA mode. |
mbed_official | 76:aeb1df146756 | 1031 | * This parameter can be: ENABLE or DISABLE. |
mbed_official | 76:aeb1df146756 | 1032 | * @retval None |
mbed_official | 76:aeb1df146756 | 1033 | */ |
mbed_official | 76:aeb1df146756 | 1034 | void USART_IrDACmd(USART_TypeDef* USARTx, FunctionalState NewState) |
mbed_official | 76:aeb1df146756 | 1035 | { |
mbed_official | 76:aeb1df146756 | 1036 | /* Check the parameters */ |
mbed_official | 76:aeb1df146756 | 1037 | assert_param(IS_USART_ALL_PERIPH(USARTx)); |
mbed_official | 76:aeb1df146756 | 1038 | assert_param(IS_FUNCTIONAL_STATE(NewState)); |
mbed_official | 76:aeb1df146756 | 1039 | |
mbed_official | 76:aeb1df146756 | 1040 | if (NewState != DISABLE) |
mbed_official | 76:aeb1df146756 | 1041 | { |
mbed_official | 76:aeb1df146756 | 1042 | /* Enable the IrDA mode by setting the IREN bit in the CR3 register */ |
mbed_official | 76:aeb1df146756 | 1043 | USARTx->CR3 |= USART_CR3_IREN; |
mbed_official | 76:aeb1df146756 | 1044 | } |
mbed_official | 76:aeb1df146756 | 1045 | else |
mbed_official | 76:aeb1df146756 | 1046 | { |
mbed_official | 76:aeb1df146756 | 1047 | /* Disable the IrDA mode by clearing the IREN bit in the CR3 register */ |
mbed_official | 76:aeb1df146756 | 1048 | USARTx->CR3 &= (uint16_t)~((uint16_t)USART_CR3_IREN); |
mbed_official | 76:aeb1df146756 | 1049 | } |
mbed_official | 76:aeb1df146756 | 1050 | } |
mbed_official | 76:aeb1df146756 | 1051 | |
mbed_official | 76:aeb1df146756 | 1052 | /** |
mbed_official | 76:aeb1df146756 | 1053 | * @} |
mbed_official | 76:aeb1df146756 | 1054 | */ |
mbed_official | 76:aeb1df146756 | 1055 | |
mbed_official | 76:aeb1df146756 | 1056 | /** @defgroup USART_Group8 DMA transfers management functions |
mbed_official | 76:aeb1df146756 | 1057 | * @brief DMA transfers management functions |
mbed_official | 76:aeb1df146756 | 1058 | * |
mbed_official | 76:aeb1df146756 | 1059 | @verbatim |
mbed_official | 76:aeb1df146756 | 1060 | =============================================================================== |
mbed_official | 76:aeb1df146756 | 1061 | ##### DMA transfers management functions ##### |
mbed_official | 76:aeb1df146756 | 1062 | =============================================================================== |
mbed_official | 76:aeb1df146756 | 1063 | |
mbed_official | 76:aeb1df146756 | 1064 | @endverbatim |
mbed_official | 76:aeb1df146756 | 1065 | * @{ |
mbed_official | 76:aeb1df146756 | 1066 | */ |
mbed_official | 76:aeb1df146756 | 1067 | |
mbed_official | 76:aeb1df146756 | 1068 | /** |
mbed_official | 76:aeb1df146756 | 1069 | * @brief Enables or disables the USART's DMA interface. |
mbed_official | 76:aeb1df146756 | 1070 | * @param USARTx: Select the USART peripheral. |
mbed_official | 76:aeb1df146756 | 1071 | * This parameter can be one of the following values: |
mbed_official | 76:aeb1df146756 | 1072 | * USART1, USART2, USART3, UART4 or UART5. |
mbed_official | 76:aeb1df146756 | 1073 | * @param USART_DMAReq: specifies the DMA request. |
mbed_official | 76:aeb1df146756 | 1074 | * This parameter can be any combination of the following values: |
mbed_official | 76:aeb1df146756 | 1075 | * @arg USART_DMAReq_Tx: USART DMA transmit request. |
mbed_official | 76:aeb1df146756 | 1076 | * @arg USART_DMAReq_Rx: USART DMA receive request. |
mbed_official | 76:aeb1df146756 | 1077 | * @param NewState: new state of the DMA Request sources. |
mbed_official | 76:aeb1df146756 | 1078 | * This parameter can be: ENABLE or DISABLE. |
mbed_official | 76:aeb1df146756 | 1079 | * @retval None |
mbed_official | 76:aeb1df146756 | 1080 | */ |
mbed_official | 76:aeb1df146756 | 1081 | void USART_DMACmd(USART_TypeDef* USARTx, uint16_t USART_DMAReq, FunctionalState NewState) |
mbed_official | 76:aeb1df146756 | 1082 | { |
mbed_official | 76:aeb1df146756 | 1083 | /* Check the parameters */ |
mbed_official | 76:aeb1df146756 | 1084 | assert_param(IS_USART_ALL_PERIPH(USARTx)); |
mbed_official | 76:aeb1df146756 | 1085 | assert_param(IS_USART_DMAREQ(USART_DMAReq)); |
mbed_official | 76:aeb1df146756 | 1086 | assert_param(IS_FUNCTIONAL_STATE(NewState)); |
mbed_official | 76:aeb1df146756 | 1087 | |
mbed_official | 76:aeb1df146756 | 1088 | if (NewState != DISABLE) |
mbed_official | 76:aeb1df146756 | 1089 | { |
mbed_official | 76:aeb1df146756 | 1090 | /* Enable the DMA transfer for selected requests by setting the DMAT and/or |
mbed_official | 76:aeb1df146756 | 1091 | DMAR bits in the USART CR3 register */ |
mbed_official | 76:aeb1df146756 | 1092 | USARTx->CR3 |= USART_DMAReq; |
mbed_official | 76:aeb1df146756 | 1093 | } |
mbed_official | 76:aeb1df146756 | 1094 | else |
mbed_official | 76:aeb1df146756 | 1095 | { |
mbed_official | 76:aeb1df146756 | 1096 | /* Disable the DMA transfer for selected requests by clearing the DMAT and/or |
mbed_official | 76:aeb1df146756 | 1097 | DMAR bits in the USART CR3 register */ |
mbed_official | 76:aeb1df146756 | 1098 | USARTx->CR3 &= (uint16_t)~USART_DMAReq; |
mbed_official | 76:aeb1df146756 | 1099 | } |
mbed_official | 76:aeb1df146756 | 1100 | } |
mbed_official | 76:aeb1df146756 | 1101 | |
mbed_official | 76:aeb1df146756 | 1102 | /** |
mbed_official | 76:aeb1df146756 | 1103 | * @} |
mbed_official | 76:aeb1df146756 | 1104 | */ |
mbed_official | 76:aeb1df146756 | 1105 | |
mbed_official | 76:aeb1df146756 | 1106 | /** @defgroup USART_Group9 Interrupts and flags management functions |
mbed_official | 76:aeb1df146756 | 1107 | * @brief Interrupts and flags management functions |
mbed_official | 76:aeb1df146756 | 1108 | * |
mbed_official | 76:aeb1df146756 | 1109 | @verbatim |
mbed_official | 76:aeb1df146756 | 1110 | =============================================================================== |
mbed_official | 76:aeb1df146756 | 1111 | ##### Interrupts and flags management functions ##### |
mbed_official | 76:aeb1df146756 | 1112 | =============================================================================== |
mbed_official | 76:aeb1df146756 | 1113 | [..] This subsection provides a set of functions allowing to configure the |
mbed_official | 76:aeb1df146756 | 1114 | USART Interrupts sources, DMA channels requests and check or clear the |
mbed_official | 76:aeb1df146756 | 1115 | flags or pending bits status. The user should identify which mode will |
mbed_official | 76:aeb1df146756 | 1116 | be used in his application to manage the communication: Polling mode, |
mbed_official | 76:aeb1df146756 | 1117 | Interrupt mode or DMA mode. |
mbed_official | 76:aeb1df146756 | 1118 | *** Polling Mode *** |
mbed_official | 76:aeb1df146756 | 1119 | ==================== |
mbed_official | 76:aeb1df146756 | 1120 | [..] In Polling Mode, the SPI communication can be managed by 10 flags: |
mbed_official | 76:aeb1df146756 | 1121 | (#) USART_FLAG_TXE: to indicate the status of the transmit buffer register. |
mbed_official | 76:aeb1df146756 | 1122 | (#) USART_FLAG_RXNE: to indicate the status of the receive buffer register. |
mbed_official | 76:aeb1df146756 | 1123 | (#) USART_FLAG_TC: to indicate the status of the transmit operation. |
mbed_official | 76:aeb1df146756 | 1124 | (#) USART_FLAG_IDLE: to indicate the status of the Idle Line. |
mbed_official | 76:aeb1df146756 | 1125 | (#) USART_FLAG_CTS: to indicate the status of the nCTS input. |
mbed_official | 76:aeb1df146756 | 1126 | (#) USART_FLAG_LBD: to indicate the status of the LIN break detection. |
mbed_official | 76:aeb1df146756 | 1127 | (#) USART_FLAG_NE: to indicate if a noise error occur. |
mbed_official | 76:aeb1df146756 | 1128 | (#) USART_FLAG_FE: to indicate if a frame error occur. |
mbed_official | 76:aeb1df146756 | 1129 | (#) USART_FLAG_PE: to indicate if a parity error occur. |
mbed_official | 76:aeb1df146756 | 1130 | (#) USART_FLAG_ORE: to indicate if an Overrun error occur. |
mbed_official | 76:aeb1df146756 | 1131 | [..] In this Mode it is advised to use the following functions: |
mbed_official | 76:aeb1df146756 | 1132 | (+) FlagStatus USART_GetFlagStatus(USART_TypeDef* USARTx, uint16_t USART_FLAG). |
mbed_official | 76:aeb1df146756 | 1133 | (+) void USART_ClearFlag(USART_TypeDef* USARTx, uint16_t USART_FLAG). |
mbed_official | 76:aeb1df146756 | 1134 | |
mbed_official | 76:aeb1df146756 | 1135 | *** Interrupt Mode *** |
mbed_official | 76:aeb1df146756 | 1136 | ====================== |
mbed_official | 76:aeb1df146756 | 1137 | [..] In Interrupt Mode, the USART communication can be managed by 8 interrupt |
mbed_official | 76:aeb1df146756 | 1138 | sources and 10 pending bits: |
mbed_official | 76:aeb1df146756 | 1139 | (+) Pending Bits: |
mbed_official | 76:aeb1df146756 | 1140 | (##) USART_IT_TXE: to indicate the status of the transmit buffer |
mbed_official | 76:aeb1df146756 | 1141 | register. |
mbed_official | 76:aeb1df146756 | 1142 | (##) USART_IT_RXNE: to indicate the status of the receive buffer |
mbed_official | 76:aeb1df146756 | 1143 | register. |
mbed_official | 76:aeb1df146756 | 1144 | (##) USART_IT_TC: to indicate the status of the transmit operation. |
mbed_official | 76:aeb1df146756 | 1145 | (##) USART_IT_IDLE: to indicate the status of the Idle Line. |
mbed_official | 76:aeb1df146756 | 1146 | (##) USART_IT_CTS: to indicate the status of the nCTS input. |
mbed_official | 76:aeb1df146756 | 1147 | (##) USART_IT_LBD: to indicate the status of the LIN break detection. |
mbed_official | 76:aeb1df146756 | 1148 | (##) USART_IT_NE: to indicate if a noise error occur. |
mbed_official | 76:aeb1df146756 | 1149 | (##) USART_IT_FE: to indicate if a frame error occur. |
mbed_official | 76:aeb1df146756 | 1150 | (##) USART_IT_PE: to indicate if a parity error occur. |
mbed_official | 76:aeb1df146756 | 1151 | (##) USART_IT_ORE: to indicate if an Overrun error occur |
mbed_official | 76:aeb1df146756 | 1152 | (if the RXNEIE or EIE bits are set). |
mbed_official | 76:aeb1df146756 | 1153 | |
mbed_official | 76:aeb1df146756 | 1154 | (+) Interrupt Source: |
mbed_official | 76:aeb1df146756 | 1155 | (##) USART_IT_TXE: specifies the interrupt source for the Tx buffer |
mbed_official | 76:aeb1df146756 | 1156 | empty interrupt. |
mbed_official | 76:aeb1df146756 | 1157 | (##) USART_IT_RXNE: specifies the interrupt source for the Rx buffer |
mbed_official | 76:aeb1df146756 | 1158 | not empty interrupt. |
mbed_official | 76:aeb1df146756 | 1159 | (##) USART_IT_TC: specifies the interrupt source for the Transmit |
mbed_official | 76:aeb1df146756 | 1160 | complete interrupt. |
mbed_official | 76:aeb1df146756 | 1161 | (##) USART_IT_IDLE: specifies the interrupt source for the Idle Line |
mbed_official | 76:aeb1df146756 | 1162 | interrupt. |
mbed_official | 76:aeb1df146756 | 1163 | (##) USART_IT_CTS: specifies the interrupt source for the CTS interrupt. |
mbed_official | 76:aeb1df146756 | 1164 | (##) USART_IT_LBD: specifies the interrupt source for the LIN break |
mbed_official | 76:aeb1df146756 | 1165 | detection interrupt. |
mbed_official | 76:aeb1df146756 | 1166 | (##) USART_IT_PE: specifies the interrupt source for theparity error |
mbed_official | 76:aeb1df146756 | 1167 | interrupt. |
mbed_official | 76:aeb1df146756 | 1168 | (##) USART_IT_ERR: specifies the interrupt source for the errors |
mbed_official | 76:aeb1df146756 | 1169 | interrupt. |
mbed_official | 76:aeb1df146756 | 1170 | -@@- Some parameters are coded in order to use them as interrupt |
mbed_official | 76:aeb1df146756 | 1171 | source or as pending bits. |
mbed_official | 76:aeb1df146756 | 1172 | [..] In this Mode it is advised to use the following functions: |
mbed_official | 76:aeb1df146756 | 1173 | (+) void USART_ITConfig(USART_TypeDef* USARTx, uint16_t USART_IT, |
mbed_official | 76:aeb1df146756 | 1174 | FunctionalState NewState). |
mbed_official | 76:aeb1df146756 | 1175 | (+) ITStatus USART_GetITStatus(USART_TypeDef* USARTx, uint16_t USART_IT). |
mbed_official | 76:aeb1df146756 | 1176 | (+) void USART_ClearITPendingBit(USART_TypeDef* USARTx, uint16_t USART_IT). |
mbed_official | 76:aeb1df146756 | 1177 | |
mbed_official | 76:aeb1df146756 | 1178 | *** DMA Mode *** |
mbed_official | 76:aeb1df146756 | 1179 | ================ |
mbed_official | 76:aeb1df146756 | 1180 | [..] In DMA Mode, the USART communication can be managed by 2 DMA Channel |
mbed_official | 76:aeb1df146756 | 1181 | requests: |
mbed_official | 76:aeb1df146756 | 1182 | (#) USART_DMAReq_Tx: specifies the Tx buffer DMA transfer request. |
mbed_official | 76:aeb1df146756 | 1183 | (#) USART_DMAReq_Rx: specifies the Rx buffer DMA transfer request. |
mbed_official | 76:aeb1df146756 | 1184 | [..] In this Mode it is advised to use the following function: |
mbed_official | 76:aeb1df146756 | 1185 | (+) void USART_DMACmd(USART_TypeDef* USARTx, uint16_t USART_DMAReq, |
mbed_official | 76:aeb1df146756 | 1186 | FunctionalState NewState). |
mbed_official | 76:aeb1df146756 | 1187 | @endverbatim |
mbed_official | 76:aeb1df146756 | 1188 | * @{ |
mbed_official | 76:aeb1df146756 | 1189 | */ |
mbed_official | 76:aeb1df146756 | 1190 | |
mbed_official | 76:aeb1df146756 | 1191 | /** |
mbed_official | 76:aeb1df146756 | 1192 | * @brief Enables or disables the specified USART interrupts. |
mbed_official | 76:aeb1df146756 | 1193 | * @param USARTx: Select the USART peripheral. |
mbed_official | 76:aeb1df146756 | 1194 | * This parameter can be one of the following values: |
mbed_official | 76:aeb1df146756 | 1195 | * USART1, USART2, USART3, UART4 or UART5. |
mbed_official | 76:aeb1df146756 | 1196 | * @param USART_IT: specifies the USART interrupt sources to be enabled or disabled. |
mbed_official | 76:aeb1df146756 | 1197 | * This parameter can be one of the following values: |
mbed_official | 76:aeb1df146756 | 1198 | * @arg USART_IT_CTS: CTS change interrupt. |
mbed_official | 76:aeb1df146756 | 1199 | * @arg USART_IT_LBD: LIN Break detection interrupt. |
mbed_official | 76:aeb1df146756 | 1200 | * @arg USART_IT_TXE: Tansmit Data Register empty interrupt. |
mbed_official | 76:aeb1df146756 | 1201 | * @arg USART_IT_TC: Transmission complete interrupt. |
mbed_official | 76:aeb1df146756 | 1202 | * @arg USART_IT_RXNE: Receive Data register not empty interrupt. |
mbed_official | 76:aeb1df146756 | 1203 | * @arg USART_IT_IDLE: Idle line detection interrupt. |
mbed_official | 76:aeb1df146756 | 1204 | * @arg USART_IT_PE: Parity Error interrupt. |
mbed_official | 76:aeb1df146756 | 1205 | * @arg USART_IT_ERR: Error interrupt(Frame error, noise error, overrun error). |
mbed_official | 76:aeb1df146756 | 1206 | * @param NewState: new state of the specified USARTx interrupts. |
mbed_official | 76:aeb1df146756 | 1207 | * This parameter can be: ENABLE or DISABLE. |
mbed_official | 76:aeb1df146756 | 1208 | * @retval None. |
mbed_official | 76:aeb1df146756 | 1209 | */ |
mbed_official | 76:aeb1df146756 | 1210 | void USART_ITConfig(USART_TypeDef* USARTx, uint16_t USART_IT, FunctionalState NewState) |
mbed_official | 76:aeb1df146756 | 1211 | { |
mbed_official | 76:aeb1df146756 | 1212 | uint32_t usartreg = 0x00, itpos = 0x00, itmask = 0x00; |
mbed_official | 76:aeb1df146756 | 1213 | uint32_t usartxbase = 0x00; |
mbed_official | 76:aeb1df146756 | 1214 | /* Check the parameters */ |
mbed_official | 76:aeb1df146756 | 1215 | assert_param(IS_USART_ALL_PERIPH(USARTx)); |
mbed_official | 76:aeb1df146756 | 1216 | assert_param(IS_USART_CONFIG_IT(USART_IT)); |
mbed_official | 76:aeb1df146756 | 1217 | assert_param(IS_FUNCTIONAL_STATE(NewState)); |
mbed_official | 76:aeb1df146756 | 1218 | |
mbed_official | 76:aeb1df146756 | 1219 | /* The CTS interrupt is not available for UART4 and UART5 */ |
mbed_official | 76:aeb1df146756 | 1220 | if (USART_IT == USART_IT_CTS) |
mbed_official | 76:aeb1df146756 | 1221 | { |
mbed_official | 76:aeb1df146756 | 1222 | assert_param(IS_USART_123_PERIPH(USARTx)); |
mbed_official | 76:aeb1df146756 | 1223 | } |
mbed_official | 76:aeb1df146756 | 1224 | |
mbed_official | 76:aeb1df146756 | 1225 | usartxbase = (uint32_t)USARTx; |
mbed_official | 76:aeb1df146756 | 1226 | |
mbed_official | 76:aeb1df146756 | 1227 | /* Get the USART register index */ |
mbed_official | 76:aeb1df146756 | 1228 | usartreg = (((uint8_t)USART_IT) >> 0x05); |
mbed_official | 76:aeb1df146756 | 1229 | |
mbed_official | 76:aeb1df146756 | 1230 | /* Get the interrupt position */ |
mbed_official | 76:aeb1df146756 | 1231 | itpos = USART_IT & IT_MASK; |
mbed_official | 76:aeb1df146756 | 1232 | itmask = (((uint32_t)0x01) << itpos); |
mbed_official | 76:aeb1df146756 | 1233 | |
mbed_official | 76:aeb1df146756 | 1234 | if (usartreg == 0x01) /* The IT is in CR1 register */ |
mbed_official | 76:aeb1df146756 | 1235 | { |
mbed_official | 76:aeb1df146756 | 1236 | usartxbase += 0x0C; |
mbed_official | 76:aeb1df146756 | 1237 | } |
mbed_official | 76:aeb1df146756 | 1238 | else if (usartreg == 0x02) /* The IT is in CR2 register */ |
mbed_official | 76:aeb1df146756 | 1239 | { |
mbed_official | 76:aeb1df146756 | 1240 | usartxbase += 0x10; |
mbed_official | 76:aeb1df146756 | 1241 | } |
mbed_official | 76:aeb1df146756 | 1242 | else /* The IT is in CR3 register */ |
mbed_official | 76:aeb1df146756 | 1243 | { |
mbed_official | 76:aeb1df146756 | 1244 | usartxbase += 0x14; |
mbed_official | 76:aeb1df146756 | 1245 | } |
mbed_official | 76:aeb1df146756 | 1246 | if (NewState != DISABLE) |
mbed_official | 76:aeb1df146756 | 1247 | { |
mbed_official | 76:aeb1df146756 | 1248 | *(__IO uint32_t*)usartxbase |= itmask; |
mbed_official | 76:aeb1df146756 | 1249 | } |
mbed_official | 76:aeb1df146756 | 1250 | else |
mbed_official | 76:aeb1df146756 | 1251 | { |
mbed_official | 76:aeb1df146756 | 1252 | *(__IO uint32_t*)usartxbase &= ~itmask; |
mbed_official | 76:aeb1df146756 | 1253 | } |
mbed_official | 76:aeb1df146756 | 1254 | } |
mbed_official | 76:aeb1df146756 | 1255 | |
mbed_official | 76:aeb1df146756 | 1256 | /** |
mbed_official | 76:aeb1df146756 | 1257 | * @brief Checks whether the specified USART flag is set or not. |
mbed_official | 76:aeb1df146756 | 1258 | * @param USARTx: Select the USART peripheral. |
mbed_official | 76:aeb1df146756 | 1259 | * This parameter can be one of the following values: |
mbed_official | 76:aeb1df146756 | 1260 | * USART1, USART2, USART3, UART4 or UART5. |
mbed_official | 76:aeb1df146756 | 1261 | * @param USART_FLAG: specifies the flag to check. |
mbed_official | 76:aeb1df146756 | 1262 | * This parameter can be one of the following values: |
mbed_official | 76:aeb1df146756 | 1263 | * @arg USART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5). |
mbed_official | 76:aeb1df146756 | 1264 | * @arg USART_FLAG_LBD: LIN Break detection flag. |
mbed_official | 76:aeb1df146756 | 1265 | * @arg USART_FLAG_TXE: Transmit data register empty flag. |
mbed_official | 76:aeb1df146756 | 1266 | * @arg USART_FLAG_TC: Transmission Complete flag. |
mbed_official | 76:aeb1df146756 | 1267 | * @arg USART_FLAG_RXNE: Receive data register not empty flag. |
mbed_official | 76:aeb1df146756 | 1268 | * @arg USART_FLAG_IDLE: Idle Line detection flag. |
mbed_official | 76:aeb1df146756 | 1269 | * @arg USART_FLAG_ORE: OverRun Error flag. |
mbed_official | 76:aeb1df146756 | 1270 | * @arg USART_FLAG_NE: Noise Error flag. |
mbed_official | 76:aeb1df146756 | 1271 | * @arg USART_FLAG_FE: Framing Error flag. |
mbed_official | 76:aeb1df146756 | 1272 | * @arg USART_FLAG_PE: Parity Error flag. |
mbed_official | 76:aeb1df146756 | 1273 | * @retval The new state of USART_FLAG (SET or RESET). |
mbed_official | 76:aeb1df146756 | 1274 | */ |
mbed_official | 76:aeb1df146756 | 1275 | FlagStatus USART_GetFlagStatus(USART_TypeDef* USARTx, uint16_t USART_FLAG) |
mbed_official | 76:aeb1df146756 | 1276 | { |
mbed_official | 76:aeb1df146756 | 1277 | FlagStatus bitstatus = RESET; |
mbed_official | 76:aeb1df146756 | 1278 | /* Check the parameters */ |
mbed_official | 76:aeb1df146756 | 1279 | assert_param(IS_USART_ALL_PERIPH(USARTx)); |
mbed_official | 76:aeb1df146756 | 1280 | assert_param(IS_USART_FLAG(USART_FLAG)); |
mbed_official | 76:aeb1df146756 | 1281 | |
mbed_official | 76:aeb1df146756 | 1282 | /* The CTS flag is not available for UART4 and UART5 */ |
mbed_official | 76:aeb1df146756 | 1283 | if (USART_FLAG == USART_FLAG_CTS) |
mbed_official | 76:aeb1df146756 | 1284 | { |
mbed_official | 76:aeb1df146756 | 1285 | assert_param(IS_USART_123_PERIPH(USARTx)); |
mbed_official | 76:aeb1df146756 | 1286 | } |
mbed_official | 76:aeb1df146756 | 1287 | |
mbed_official | 76:aeb1df146756 | 1288 | if ((USARTx->SR & USART_FLAG) != (uint16_t)RESET) |
mbed_official | 76:aeb1df146756 | 1289 | { |
mbed_official | 76:aeb1df146756 | 1290 | bitstatus = SET; |
mbed_official | 76:aeb1df146756 | 1291 | } |
mbed_official | 76:aeb1df146756 | 1292 | else |
mbed_official | 76:aeb1df146756 | 1293 | { |
mbed_official | 76:aeb1df146756 | 1294 | bitstatus = RESET; |
mbed_official | 76:aeb1df146756 | 1295 | } |
mbed_official | 76:aeb1df146756 | 1296 | return bitstatus; |
mbed_official | 76:aeb1df146756 | 1297 | } |
mbed_official | 76:aeb1df146756 | 1298 | |
mbed_official | 76:aeb1df146756 | 1299 | /** |
mbed_official | 76:aeb1df146756 | 1300 | * @brief Clears the USARTx's pending flags. |
mbed_official | 76:aeb1df146756 | 1301 | * @param USARTx: Select the USART peripheral. |
mbed_official | 76:aeb1df146756 | 1302 | * This parameter can be one of the following values: |
mbed_official | 76:aeb1df146756 | 1303 | * USART1, USART2, USART3, UART4 or UART5. |
mbed_official | 76:aeb1df146756 | 1304 | * @param USART_FLAG: specifies the flag to clear. |
mbed_official | 76:aeb1df146756 | 1305 | * This parameter can be any combination of the following values: |
mbed_official | 76:aeb1df146756 | 1306 | * @arg USART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5). |
mbed_official | 76:aeb1df146756 | 1307 | * @arg USART_FLAG_LBD: LIN Break detection flag. |
mbed_official | 76:aeb1df146756 | 1308 | * @arg USART_FLAG_TC: Transmission Complete flag. |
mbed_official | 76:aeb1df146756 | 1309 | * @arg USART_FLAG_RXNE: Receive data register not empty flag. |
mbed_official | 76:aeb1df146756 | 1310 | * |
mbed_official | 76:aeb1df146756 | 1311 | * |
mbed_official | 76:aeb1df146756 | 1312 | * @note PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun |
mbed_official | 76:aeb1df146756 | 1313 | * error) and IDLE (Idle line detected) flags are cleared by software |
mbed_official | 76:aeb1df146756 | 1314 | * sequence: a read operation to USART_SR register (USART_GetFlagStatus()) |
mbed_official | 76:aeb1df146756 | 1315 | * followed by a read operation to USART_DR register (USART_ReceiveData()). |
mbed_official | 76:aeb1df146756 | 1316 | * @note RXNE flag can be also cleared by a read to the USART_DR register |
mbed_official | 76:aeb1df146756 | 1317 | * (USART_ReceiveData()). |
mbed_official | 76:aeb1df146756 | 1318 | * @note TC flag can be also cleared by software sequence: a read operation to |
mbed_official | 76:aeb1df146756 | 1319 | * USART_SR register (USART_GetFlagStatus()) followed by a write operation |
mbed_official | 76:aeb1df146756 | 1320 | * to USART_DR register (USART_SendData()). |
mbed_official | 76:aeb1df146756 | 1321 | * @note TXE flag is cleared only by a write to the USART_DR register |
mbed_official | 76:aeb1df146756 | 1322 | * (USART_SendData()). |
mbed_official | 76:aeb1df146756 | 1323 | * @retval None |
mbed_official | 76:aeb1df146756 | 1324 | */ |
mbed_official | 76:aeb1df146756 | 1325 | void USART_ClearFlag(USART_TypeDef* USARTx, uint16_t USART_FLAG) |
mbed_official | 76:aeb1df146756 | 1326 | { |
mbed_official | 76:aeb1df146756 | 1327 | /* Check the parameters */ |
mbed_official | 76:aeb1df146756 | 1328 | assert_param(IS_USART_ALL_PERIPH(USARTx)); |
mbed_official | 76:aeb1df146756 | 1329 | assert_param(IS_USART_CLEAR_FLAG(USART_FLAG)); |
mbed_official | 76:aeb1df146756 | 1330 | |
mbed_official | 76:aeb1df146756 | 1331 | /* The CTS flag is not available for UART4 and UART5 */ |
mbed_official | 76:aeb1df146756 | 1332 | if ((USART_FLAG & USART_FLAG_CTS) == USART_FLAG_CTS) |
mbed_official | 76:aeb1df146756 | 1333 | { |
mbed_official | 76:aeb1df146756 | 1334 | assert_param(IS_USART_123_PERIPH(USARTx)); |
mbed_official | 76:aeb1df146756 | 1335 | } |
mbed_official | 76:aeb1df146756 | 1336 | |
mbed_official | 76:aeb1df146756 | 1337 | USARTx->SR = (uint16_t)~USART_FLAG; |
mbed_official | 76:aeb1df146756 | 1338 | } |
mbed_official | 76:aeb1df146756 | 1339 | |
mbed_official | 76:aeb1df146756 | 1340 | /** |
mbed_official | 76:aeb1df146756 | 1341 | * @brief Checks whether the specified USART interrupt has occurred or not. |
mbed_official | 76:aeb1df146756 | 1342 | * @param USARTx: Select the USART peripheral. |
mbed_official | 76:aeb1df146756 | 1343 | * This parameter can be one of the following values: |
mbed_official | 76:aeb1df146756 | 1344 | * USART1, USART2, USART3, UART4 or UART5. |
mbed_official | 76:aeb1df146756 | 1345 | * @param USART_IT: specifies the USART interrupt source to check. |
mbed_official | 76:aeb1df146756 | 1346 | * This parameter can be one of the following values: |
mbed_official | 76:aeb1df146756 | 1347 | * @arg USART_IT_CTS: CTS change interrupt (not available for UART4 and UART5) |
mbed_official | 76:aeb1df146756 | 1348 | * @arg USART_IT_LBD: LIN Break detection interrupt |
mbed_official | 76:aeb1df146756 | 1349 | * @arg USART_IT_TXE: Tansmit Data Register empty interrupt |
mbed_official | 76:aeb1df146756 | 1350 | * @arg USART_IT_TC: Transmission complete interrupt |
mbed_official | 76:aeb1df146756 | 1351 | * @arg USART_IT_RXNE: Receive Data register not empty interrupt |
mbed_official | 76:aeb1df146756 | 1352 | * @arg USART_IT_IDLE: Idle line detection interrupt |
mbed_official | 76:aeb1df146756 | 1353 | * @arg USART_IT_ORE_RX: OverRun Error interrupt if the RXNEIE bit is set. |
mbed_official | 76:aeb1df146756 | 1354 | * @arg USART_IT_ORE_ER: OverRun Error interrupt if the EIE bit is set. |
mbed_official | 76:aeb1df146756 | 1355 | * @arg USART_IT_NE: Noise Error interrupt |
mbed_official | 76:aeb1df146756 | 1356 | * @arg USART_IT_FE: Framing Error interrupt |
mbed_official | 76:aeb1df146756 | 1357 | * @arg USART_IT_PE: Parity Error interrupt |
mbed_official | 76:aeb1df146756 | 1358 | * @retval The new state of USART_IT (SET or RESET). |
mbed_official | 76:aeb1df146756 | 1359 | */ |
mbed_official | 76:aeb1df146756 | 1360 | ITStatus USART_GetITStatus(USART_TypeDef* USARTx, uint16_t USART_IT) |
mbed_official | 76:aeb1df146756 | 1361 | { |
mbed_official | 76:aeb1df146756 | 1362 | uint32_t bitpos = 0x00, itmask = 0x00, usartreg = 0x00; |
mbed_official | 76:aeb1df146756 | 1363 | ITStatus bitstatus = RESET; |
mbed_official | 76:aeb1df146756 | 1364 | /* Check the parameters */ |
mbed_official | 76:aeb1df146756 | 1365 | assert_param(IS_USART_ALL_PERIPH(USARTx)); |
mbed_official | 76:aeb1df146756 | 1366 | assert_param(IS_USART_GET_IT(USART_IT)); |
mbed_official | 76:aeb1df146756 | 1367 | |
mbed_official | 76:aeb1df146756 | 1368 | /* The CTS interrupt is not available for UART4 and UART5 */ |
mbed_official | 76:aeb1df146756 | 1369 | if (USART_IT == USART_IT_CTS) |
mbed_official | 76:aeb1df146756 | 1370 | { |
mbed_official | 76:aeb1df146756 | 1371 | assert_param(IS_USART_123_PERIPH(USARTx)); |
mbed_official | 76:aeb1df146756 | 1372 | } |
mbed_official | 76:aeb1df146756 | 1373 | |
mbed_official | 76:aeb1df146756 | 1374 | /* Get the USART register index */ |
mbed_official | 76:aeb1df146756 | 1375 | usartreg = (((uint8_t)USART_IT) >> 0x05); |
mbed_official | 76:aeb1df146756 | 1376 | /* Get the interrupt position */ |
mbed_official | 76:aeb1df146756 | 1377 | itmask = USART_IT & IT_MASK; |
mbed_official | 76:aeb1df146756 | 1378 | itmask = (uint32_t)0x01 << itmask; |
mbed_official | 76:aeb1df146756 | 1379 | |
mbed_official | 76:aeb1df146756 | 1380 | if (usartreg == 0x01) /* The IT is in CR1 register */ |
mbed_official | 76:aeb1df146756 | 1381 | { |
mbed_official | 76:aeb1df146756 | 1382 | itmask &= USARTx->CR1; |
mbed_official | 76:aeb1df146756 | 1383 | } |
mbed_official | 76:aeb1df146756 | 1384 | else if (usartreg == 0x02) /* The IT is in CR2 register */ |
mbed_official | 76:aeb1df146756 | 1385 | { |
mbed_official | 76:aeb1df146756 | 1386 | itmask &= USARTx->CR2; |
mbed_official | 76:aeb1df146756 | 1387 | } |
mbed_official | 76:aeb1df146756 | 1388 | else /* The IT is in CR3 register */ |
mbed_official | 76:aeb1df146756 | 1389 | { |
mbed_official | 76:aeb1df146756 | 1390 | itmask &= USARTx->CR3; |
mbed_official | 76:aeb1df146756 | 1391 | } |
mbed_official | 76:aeb1df146756 | 1392 | |
mbed_official | 76:aeb1df146756 | 1393 | bitpos = USART_IT >> 0x08; |
mbed_official | 76:aeb1df146756 | 1394 | bitpos = (uint32_t)0x01 << bitpos; |
mbed_official | 76:aeb1df146756 | 1395 | bitpos &= USARTx->SR; |
mbed_official | 76:aeb1df146756 | 1396 | if ((itmask != (uint16_t)RESET)&&(bitpos != (uint16_t)RESET)) |
mbed_official | 76:aeb1df146756 | 1397 | { |
mbed_official | 76:aeb1df146756 | 1398 | bitstatus = SET; |
mbed_official | 76:aeb1df146756 | 1399 | } |
mbed_official | 76:aeb1df146756 | 1400 | else |
mbed_official | 76:aeb1df146756 | 1401 | { |
mbed_official | 76:aeb1df146756 | 1402 | bitstatus = RESET; |
mbed_official | 76:aeb1df146756 | 1403 | } |
mbed_official | 76:aeb1df146756 | 1404 | |
mbed_official | 76:aeb1df146756 | 1405 | return bitstatus; |
mbed_official | 76:aeb1df146756 | 1406 | } |
mbed_official | 76:aeb1df146756 | 1407 | |
mbed_official | 76:aeb1df146756 | 1408 | /** |
mbed_official | 76:aeb1df146756 | 1409 | * @brief Clears the USARTx's interrupt pending bits. |
mbed_official | 76:aeb1df146756 | 1410 | * @param USARTx: Select the USART peripheral. |
mbed_official | 76:aeb1df146756 | 1411 | * This parameter can be one of the following values: |
mbed_official | 76:aeb1df146756 | 1412 | * USART1, USART2, USART3, UART4 or UART5. |
mbed_official | 76:aeb1df146756 | 1413 | * @param USART_IT: specifies the interrupt pending bit to clear. |
mbed_official | 76:aeb1df146756 | 1414 | * This parameter can be one of the following values: |
mbed_official | 76:aeb1df146756 | 1415 | * @arg USART_IT_CTS: CTS change interrupt (not available for UART4 and UART5) |
mbed_official | 76:aeb1df146756 | 1416 | * @arg USART_IT_LBD: LIN Break detection interrupt |
mbed_official | 76:aeb1df146756 | 1417 | * @arg USART_IT_TC: Transmission complete interrupt. |
mbed_official | 76:aeb1df146756 | 1418 | * @arg USART_IT_RXNE: Receive Data register not empty interrupt. |
mbed_official | 76:aeb1df146756 | 1419 | * |
mbed_official | 76:aeb1df146756 | 1420 | |
mbed_official | 76:aeb1df146756 | 1421 | * @note PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun |
mbed_official | 76:aeb1df146756 | 1422 | * error) and IDLE (Idle line detected) pending bits are cleared by |
mbed_official | 76:aeb1df146756 | 1423 | * software sequence: a read operation to USART_SR register |
mbed_official | 76:aeb1df146756 | 1424 | * (USART_GetITStatus()) followed by a read operation to USART_DR register |
mbed_official | 76:aeb1df146756 | 1425 | * (USART_ReceiveData()). |
mbed_official | 76:aeb1df146756 | 1426 | * @note RXNE pending bit can be also cleared by a read to the USART_DR register |
mbed_official | 76:aeb1df146756 | 1427 | * (USART_ReceiveData()). |
mbed_official | 76:aeb1df146756 | 1428 | * @note TC pending bit can be also cleared by software sequence: a read |
mbed_official | 76:aeb1df146756 | 1429 | * operation to USART_SR register (USART_GetITStatus()) followed by a write |
mbed_official | 76:aeb1df146756 | 1430 | * operation to USART_DR register (USART_SendData()). |
mbed_official | 76:aeb1df146756 | 1431 | * @note TXE pending bit is cleared only by a write to the USART_DR register |
mbed_official | 76:aeb1df146756 | 1432 | * (USART_SendData()). |
mbed_official | 76:aeb1df146756 | 1433 | * @retval None |
mbed_official | 76:aeb1df146756 | 1434 | */ |
mbed_official | 76:aeb1df146756 | 1435 | void USART_ClearITPendingBit(USART_TypeDef* USARTx, uint16_t USART_IT) |
mbed_official | 76:aeb1df146756 | 1436 | { |
mbed_official | 76:aeb1df146756 | 1437 | uint16_t bitpos = 0x00, itmask = 0x00; |
mbed_official | 76:aeb1df146756 | 1438 | /* Check the parameters */ |
mbed_official | 76:aeb1df146756 | 1439 | assert_param(IS_USART_ALL_PERIPH(USARTx)); |
mbed_official | 76:aeb1df146756 | 1440 | assert_param(IS_USART_CLEAR_IT(USART_IT)); |
mbed_official | 76:aeb1df146756 | 1441 | |
mbed_official | 76:aeb1df146756 | 1442 | /* The CTS interrupt is not available for UART4 and UART5 */ |
mbed_official | 76:aeb1df146756 | 1443 | if (USART_IT == USART_IT_CTS) |
mbed_official | 76:aeb1df146756 | 1444 | { |
mbed_official | 76:aeb1df146756 | 1445 | assert_param(IS_USART_123_PERIPH(USARTx)); |
mbed_official | 76:aeb1df146756 | 1446 | } |
mbed_official | 76:aeb1df146756 | 1447 | |
mbed_official | 76:aeb1df146756 | 1448 | bitpos = USART_IT >> 0x08; |
mbed_official | 76:aeb1df146756 | 1449 | itmask = ((uint16_t)0x01 << (uint16_t)bitpos); |
mbed_official | 76:aeb1df146756 | 1450 | USARTx->SR = (uint16_t)~itmask; |
mbed_official | 76:aeb1df146756 | 1451 | } |
mbed_official | 76:aeb1df146756 | 1452 | |
mbed_official | 76:aeb1df146756 | 1453 | /** |
mbed_official | 76:aeb1df146756 | 1454 | * @} |
mbed_official | 76:aeb1df146756 | 1455 | */ |
mbed_official | 76:aeb1df146756 | 1456 | |
mbed_official | 76:aeb1df146756 | 1457 | /** |
mbed_official | 76:aeb1df146756 | 1458 | * @} |
mbed_official | 76:aeb1df146756 | 1459 | */ |
mbed_official | 76:aeb1df146756 | 1460 | |
mbed_official | 76:aeb1df146756 | 1461 | /** |
mbed_official | 76:aeb1df146756 | 1462 | * @} |
mbed_official | 76:aeb1df146756 | 1463 | */ |
mbed_official | 76:aeb1df146756 | 1464 | |
mbed_official | 76:aeb1df146756 | 1465 | /** |
mbed_official | 76:aeb1df146756 | 1466 | * @} |
mbed_official | 76:aeb1df146756 | 1467 | */ |
mbed_official | 76:aeb1df146756 | 1468 | |
mbed_official | 76:aeb1df146756 | 1469 | /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |