![](/media/cache/profiles/89a26a363b87a87ac6a94277e841b7f4.50x50_q85.jpg)
An Open Sound Control library for the mbed, created to be compatible with Recotana's OSCClass library (http://recotana.com) for the Arduino with Ethernet shield. It also uses parts of the OSC Transceiver(Sender/Receiver) code by xshige written by: Alvaro Cassinelli, October 2011 tweaked by: Toby Harris / *spark audio-visual, March 2012
Dependencies: NetServices mbed
mbedOSC.h
- Committer:
- tobyspark
- Date:
- 2012-04-15
- Revision:
- 6:bdcd499c3ed4
- Parent:
- 5:247b80b139d3
- Child:
- 7:090b23c0a504
File content as of revision 6:bdcd499c3ed4:
/* mbed OSC Library This is an Open Sound Control library for the mbed, created to be compatible with Recotana's OSCClass library (http://recotana.com) for the Arduino with Ethernet shield. I have also used parts of the OSC Transceiver(Sender/Receiver) code by xshige written by: Alvaro Cassinelli, 7.10.2011 tweaked by: Toby Harris / *spark audio-visual, 13.4.2012 This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License version 2.1 as published by the Free Software Foundation. Open Sound Control http://opensoundcontrol.org/ mbedOSC version 0.1 Specification (similar to Recotana's OSCClass library) ******** Address : max 2 "/ard" "/ard/output" --address[0]="/ard" :max 15character --address[1]="/output" :max 15character ******* TypeTag : max 2 "i" - long or unsigned long "f" - double ******* arg : max 2 ******* Example of an OSC message: "/mbed/test1, if 50 32.4" (Note: this is not the byte string sent as UDP packet - there are no spaces, and arguments are in binary, BIG ENDIAN) */ #ifndef mbedOSC_h #define mbedOSC_h #include "mbed.h" #include "EthernetNetIf.h" #include "UDPSocket.h" // setup IP of destination (computer): #define DEFAULT_SEND_PORT 12000 //Host sendHost(IpAddr(10, 0, 0, 1), DEFAULT_SEND_PORT, NULL); // Send Port // set IP of origin of UDP packets - the mbed acts as a SERVER here, and needs to bind the socket to the "client" (the computer) #define DEFAULT_RECEIVE_PORT 57130 //Host recHost(IpAddr(10, 0, 0, 1), DEFAULT_RECEIVE_PORT, NULL); // Receive Port //UDPSocket udpRec,udpSend; #define MAX_ADDRESS 2 #define MAX_ARG 2 #define TYPE_INT 1 #define TYPE_FLOAT 2 /** Container class for OSC messages (receiving or sending) */ class OSCMessage{ private: char *address[MAX_ADDRESS]; // these are strings (as char*) uint8_t addressNum; // current number of addresses in the message (ex: "/ard/test" --> the number of the addresses is 2) char typeTag[MAX_ARG]; void *arg[MAX_ARG]; uint8_t argNum; // Information about the connection: //uint8_t ip[4]; //uint16_t port; Host host; public: /** Create a container for an OSC message to be received or sent */ OSCMessage(); /** Return the IpAddr object */ const IpAddr& getIp(); /** Return the port */ const int& getPort(); /** Gets the address string of the OSC message * * @param [in] _index is the index of the address string (byte) * return pointer of the address string (char *) * @note ex. "/ard/test"<br> * getAddress(0) = "/ard"<br> * getAddress(1) = "/test" * @attention It is maximum number of the addresses is 2<br> * In this case "/ard/test1/test2"<br> * ignore it after "/test2" */ char *getAddress(uint8_t _index); //retturn address /** Gets the TopAddress string of the OSC message (this is just the address with index 0) @param[in] None return pointer of the TopAddress string (char *), i.e. address[0] Example: In the case "/ard/test", getTopAddress() = "/ard" (WITH the slash "/") *//* Gets the TopAddress string of the OSC message (this is just the address with index 0) @param[in] None return pointer of the TopAddress string (char *), i.e. address[0] Example: In the case "/ard/test", getTopAddress() = "/ard" (WITH the slash "/") */ char *getTopAddress(); //return address[0] :"/ard" /** Gets the "SubAddress" string of the OSC message (this is just the address with index 1) @param[in] None return pointer of the SubAddress string (char *), i.e. address[1] Example: in the case "/ard/test", getSubAddress() = "/test" (WITH the slash "/") */ char *getSubAddress(); //return address[1] :"/test" /** Gets the number of the OSC message address @param[in] None return number of the OSC message address (byte) Examples: "/ard" --> the number of the addresses is 1 "/ard/test" --> the number of the addresses is 2 Attention: the maximum number of addresses is 2 (MAX_ADDRESS) */ uint8_t getAddressNum(); //return 2 /** Gets the TypeTag string (with index) of the OSC message @param[in] <--_index is the index of the TypeTag string (byte) return: TypeTag char (char) Example: in the case of a total typetag string equal to "if", getTypeTag(0) = 'i' and getTypeTag(1) = 'f' Attention: MAX_ARG is maximum number of the args, if the index argument is larger, it will be constrained to this max. */ char getTypeTag(uint8_t _index); //_index=0 ->'i' //_index=1 ->'f' /** Gets the number of the OSC message args @param[in] None return number of the args (byte) Example: "i" 123 --> number of the OSC message args is 1 "if" 123 54.24 --> number of the OSC message args is 2 Attention: the maximum number of args is 2 (MAX_ARG) */ uint8_t getArgNum(); //return 2 /** Get the args of the OSC message with an integer value @param[in] <--_index is (an int, or uint8_t), corresponding to the index of the args (byte) return: integer value (long, or int32_t) Example: in the case "if" 123 54.24, getArgInt(0) = 123 Noe: "i" is integer, but the return type is "long" Note: When a index is bigger than the number of the args, it is set to the number of the args */ int32_t getArgInt(uint8_t _index); //_index=0 -> 123 /** Get the args of the OSC message with a float value @param[in] <--_index is the index of the args return: float value (double) note: In this case "if" 123 54.24, getArgFloat(1) = 54.24 attention: arg declared as float, but return value cast as "double" attention: When index is bigger than the number of the args, it is set to the number of the args */ double getArgFloat(uint8_t _index); //_index=1 -> 54.21 /** Set TopAddress string of OSC Message @param[in] _address is a string pointer for the TopAddress String (char *). NOTE: is this a good idea? why not pass as const, and do allocation here? return: None Example: if the complete address string is "/ard/test", we set the topaddress as follows: char top[]="/ard" (allocation done here!), then setTopAddress(top) */ void setTopAddress(char *_address); //set address[0] /** Set SubAddress string of the OSC Message @param[in] _address is a string pointer for the SubAddress String (char *) return: None Example: if the complete address string is "/ard/test", we set the subaddress as follows: char sub[]="/test" (allocation done here!), then setSubAddress(sub) Attention: we should call first setTopAddress, and then setSubAddress. The order is important. This does not seems like a good idea... */ void setSubAddress(char *_address); //set address[1] /** Set the complete Address string of the OSC Message (top and sub addresses) @param[in] _topAddress and _subAddress are the string pointers to top and sub addresses (char *) return: None Example: in the case "/ard/test", we need to do: char top[]="/ard", char sub[]="/test", and then setAddress(top,sub) Reminder: in this implementation, the maximum number of addresses is MAX_ADDRESS=2 */ void setAddress(char *_topAddress, char *_subAddress); /** Set address string using index (here 0 or 1) Example: "/ard/test", char adr[]="/ard", setAddress(0,adr), char adr2[]="/test", setAddress(1,adr) */ void setAddress(uint8_t _index, //set 0,address[0] char *_address); //set 1,address[1] /** Set IP Address of the OSC Message (for SENDING messages - for receiving this will be done when receiving something ) @param[in] _ip pointer of IP Address array (byte *) Example: IP=192.168.0.99, then we have to do: ip[]={192,168,0,1}, then setIp(ip) */ void setIp( uint8_t *_ip ); //set ip /** Set IP Address to the OSC Message container (not through pointer) Example: IP=192.168.0.99 => setIp(192,168,0,99) */ void setIp(uint8_t _ip1, //set(192, uint8_t _ip2, // 168, uint8_t _ip3, // 0, uint8_t _ip4); // 100) /* Set PortNo for the OSC Message @param[in] _port PortNo (unsigned int) @return None */ void setPort( uint16_t _port ); /** Set TypeTag and args to the OSC Message container @param[in] types TypeTag string "i"(integer) or"f"(float) (char *) @param[in] ... Pointer of the Args(variable argument) .. @return None @Example: (1) integer 123: (NOTE: integers are LONG) long v1=123; sendMes.setArgs("i",&v1) (2)integer:123 and float:52.14 long v1=123; double v2=52.14; sendMes.setArgs("if",&v1,&v2) Attention: in this implementation, the maximum number of the args is 2 (if setArgs("iff",&v1,&v2,&v3), data is ignored after &v3) */ void setArgs( char *types , ... ); //set ("if",&v1,&v2) friend class OSCClass; }; /* ==================================== OSCClass for sending and receiving OSC messages using UDP protocol ===================================== */ #include "UDPSocket.h" /** Wraps the UDP functions to send and receive OSC messages */ class OSCClass { private: UDPSocket udpRec,udpSend; char rcvBuff[256]; // raw buffer for UDP packets (udpRec.recvfrom( buf, 256, &host ) )) int buflength; OSCMessage *receiverMessage; OSCMessage *sendContainer; char tempAddress[MAX_ADDRESS][16]; uint8_t tempArg[MAX_ARG][4]; void decodePacket( OSCMessage *_mes); // makes OSC message from packet public: /** Create an object to send and receive OSC messages */ OSCClass(); /** This sets "binds" the received message to the receiver container of the communication object @param[in]<--_mes is a pointer to the "receiveing" OSC message (OSCMessage *) */ OSCClass(OSCMessage *_mes); // set the receiver message container /** Ignore: See messageReceivedCallback instead. This is called by the UDPSocket... and should be a protected function and we friend UDPSocket? */ void onUDPSocketEvent(UDPSocketEvent e); /** This initializes the OSC communication object with default receiving port (DEFAULT_REC_PORT) @param[in]: None return: None */ void begin(); /** Initialize an OSC object with arbitrary listening port @param[in] _recievePort, is the listening ("receiving") Port No (unsigned int) return: None */ void begin(uint16_t _recievePort); /** Stop OSC communication (in fact, only the receiver - the server side) */ void stop(); //new OSC data in the receiver message container: bool newMessage; /** Set a OSC receive message container @param[in] _mes Pointer to the OSC receive message container (OSCMessage *) return None */ void setReceiveMessage( OSCMessage *_mes ); //set receive OSCmessage container (note: the message has a "host" object from which we get the upd packets) /** Get the received OSC message (note: this is another way to access the message directly from the OSCClass object). The advantage is that we will signal that we read the message, and will be able to query if a NEW message arrived (Alternatively, one could have a function pointer to pass to the OSC object, that will be called each time a new packet is received: TO DO) */ OSCMessage *getMessage(); //return received OSCmessage //buffer clear //void flush(); /** Send an OSC Message (message contain the host ip and port where the message data has to be sent) @param[in] _mes Pointer to the OSC message container (OSCMessage *) return None */ void sendOsc( OSCMessage *_mes ); //set&send OSCmessage (note: it will be sent to the host defined in the message container) //to be set by host program, will be called on receipt of an OSC message FunctionPointer messageReceivedCallback; }; #endif