Diff: sx1272/sx1272-hal.cpp

Revision:

23:273a2f93ae99

Child:

24:9100348e6c28

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/sx1272/sx1272-hal.cpp	Tue Feb 09 02:05:06 2016 +0000
@@ -0,0 +1,313 @@
+/*
+ / _____)             _              | |
+( (____  _____ ____ _| |_ _____  ____| |__
+ \____ \| ___ |    (_   _) ___ |/ ___)  _ \
+ _____) ) ____| | | || |_| ____( (___| | | |
+(______/|_____)_|_|_| \__)_____)\____)_| |_|
+    (C) 2014 Semtech
+
+Description: -
+
+License: Revised BSD License, see LICENSE.TXT file include in the project
+
+Maintainers: Miguel Luis, Gregory Cristian and Nicolas Huguenin
+*/
+#include "sx1272-hal.h"
+#include "debug.h"
+
+const RadioRegisters_t SX1272MB1xAS::RadioRegsInit[] = RADIO_INIT_REGISTERS_VALUE;
+
+SX1272MB1xAS::SX1272MB1xAS( RadioEvents_t *events,
+                            PinName mosi, PinName miso, PinName sclk, PinName nss, PinName reset,
+                            PinName dio0, PinName dio1, PinName dio2, PinName dio3, PinName dio4, PinName dio5,
+                            PinName antSwitch )
+                            : SX1272( events, mosi, miso, sclk, nss, reset, dio0, dio1, dio2, dio3, dio4, dio5 ),
+                            antSwitch( antSwitch ),
+                        #if( defined ( TARGET_NUCLEO_L152RE ) )
+                            fake( D8 ) 
+                        #else
+                            fake( A3 )
+                        #endif
+{
+    debug("SX1272MB1xAS constructor\r\n");
+    this->RadioEvents = events;
+
+    Reset( );
+    
+    RxChainCalibration( );
+    
+    IoInit( );
+    
+    SetOpMode( RF_OPMODE_SLEEP );
+    
+    IoIrqInit( dioIrq );
+    
+    RadioRegistersInit( );
+
+    SetModem( MODEM_FSK );
+//    SetModem( MODEM_LORA );
+
+    this->settings.State = RF_IDLE ;
+}
+
+SX1272MB1xAS::SX1272MB1xAS( RadioEvents_t *events ) 
+                        #if defined ( TARGET_NUCLEO_L152RE )
+                        :   SX1272( events, D11, D12, D13, D10, A0, D2, D3, D4, D5, A3, D9 ), // For NUCLEO L152RE dio4 is on port A3
+                            antSwitch( A4 ),
+                            fake( D8 )
+                        #elif defined( TARGET_LPC11U6X )
+                        :   SX1272( events, D11, D12, D13, D10, A0, D2, D3, D4, D5, D8, D9 ),
+                            antSwitch( P0_23 ), 
+                            fake( A3 )
+                        #else
+                        :   SX1272( events, D11, D12, D13, D10, A0, D2, D3, D4, D5, D8, D9 ),
+                            antSwitch( A4 ), 
+                            fake( A3 )
+                        #endif
+{
+    debug("SX1272MB1xAS constructor1\r\n");
+    this->RadioEvents = events;
+
+    Reset( );
+    
+    boardConnected = UNKNOWN;
+    
+    DetectBoardType( );
+    
+    RxChainCalibration( );
+    
+    IoInit( );
+    
+    SetOpMode( RF_OPMODE_SLEEP );
+    IoIrqInit( dioIrq );
+    
+    RadioRegistersInit( );
+
+    SetModem( MODEM_FSK );
+//    SetModem( MODEM_LORA );
+
+    this->settings.State = RF_IDLE ;
+}
+
+//-------------------------------------------------------------------------
+//                      Board relative functions
+//-------------------------------------------------------------------------
+uint8_t SX1272MB1xAS::DetectBoardType( void )
+{
+    debug("DetectBoardType\r\n");
+    if( boardConnected == UNKNOWN )
+    {
+        antSwitch.input( );
+        wait_ms( 1 );
+        if( antSwitch == 1 )
+        {
+            boardConnected = SX1272RF1;
+        }
+        else
+        {
+            boardConnected = SX1272RF1;
+        }
+        antSwitch.output( );
+        wait_ms( 1 );
+    }
+    return ( boardConnected );
+}
+
+void SX1272MB1xAS::IoInit( void )
+{
+    debug("IoInit\r\n");
+    AntSwInit( );
+    SpiInit( );
+}
+
+void SX1272MB1xAS::RadioRegistersInit( )
+{
+   uint8_t i = 0;
+    for( i = 0; i < sizeof( RadioRegsInit ) / sizeof( RadioRegisters_t ); i++ )
+    {
+     debug("RadioRegistersInit %d %02X %02X\r\n",RadioRegsInit[i].Modem ,RadioRegsInit[i].Addr, RadioRegsInit[i].Value  );
+        SetModem( RadioRegsInit[i].Modem );
+        Write( RadioRegsInit[i].Addr, RadioRegsInit[i].Value );
+    }    
+}
+
+void SX1272MB1xAS::SpiInit( void )
+{
+      debug("SpiInit\r\n");
+    nss = 1;    
+    spi.format( 8,0 );   
+    uint32_t frequencyToSet = 1000000;
+ //  uint32_t frequencyToSet = 8000000;
+//    #if( defined ( TARGET_NUCLEO_L152RE ) ||  defined ( TARGET_LPC11U6X ) )
+        spi.frequency( frequencyToSet );
+//    #elif( defined ( TARGET_KL25Z ) ) //busclock frequency is halved -> double the spi frequency to compensate
+//        spi.frequency( frequencyToSet * 2 );
+//    #else
+//        #warning "Check the board's SPI frequency"
+//    #endif
+    wait(0.1); 
+}
+
+void SX1272MB1xAS::IoIrqInit( DioIrqHandler *irqHandlers )
+{
+      debug("IoIrqInit\r\n");
+#if( defined ( TARGET_NUCLEO_L152RE ) ||  defined ( TARGET_LPC11U6X ) )
+    dio0.mode(PullDown);
+    dio1.mode(PullDown);   
+    dio2.mode(PullDown);
+    dio3.mode(PullDown); 
+    dio4.mode(PullDown); 
+#endif
+    dio0.rise( this, static_cast< TriggerMB1xAS > ( irqHandlers[0] ) );
+    dio1.rise( this, static_cast< TriggerMB1xAS > ( irqHandlers[1] ) );
+    dio2.rise( this, static_cast< TriggerMB1xAS > ( irqHandlers[2] ) );
+    dio3.rise( this, static_cast< TriggerMB1xAS > ( irqHandlers[3] ) );
+    dio4.rise( this, static_cast< TriggerMB1xAS > ( irqHandlers[4] ) );
+}
+
+void SX1272MB1xAS::IoDeInit( void )
+{
+       debug("IoDeInit\r\n");
+   //nothing
+}
+
+uint8_t SX1272MB1xAS::GetPaSelect( uint32_t channel )
+{
+      debug("GetPaSelect\r\n");
+    if( channel > RF_MID_BAND_THRESH )
+    {
+        if( boardConnected == SX1276MB1LAS )
+        {
+            return RF_PACONFIG_PASELECT_PABOOST;
+        }
+        else
+        {
+            return RF_PACONFIG_PASELECT_RFO;
+        }
+    }
+    else
+    {
+        return RF_PACONFIG_PASELECT_RFO;
+    }
+}
+
+void SX1272MB1xAS::SetAntSwLowPower( bool status )
+{
+      debug("SetAntSwLowPower %d\r\n",status);
+    if( isRadioActive != status )
+    {
+        isRadioActive = status;
+    
+        if( status == false )
+        {
+            AntSwInit( );
+        }
+        else
+        {
+            AntSwDeInit( );
+        }
+    }
+}
+
+void SX1272MB1xAS::AntSwInit( void )
+{
+       debug("AntSwInit\r\n");
+   antSwitch = 0;
+}
+
+void SX1272MB1xAS::AntSwDeInit( void )
+{
+       debug("AntSwDeInit\r\n");
+   antSwitch = 0;
+}
+
+void SX1272MB1xAS::SetAntSw( uint8_t rxTx )
+{
+       debug("SetAntSw\r\n");
+   if( this->rxTx == rxTx )
+    {
+        //no need to go further
+        return;
+    }
+
+    this->rxTx = rxTx;
+
+    if( rxTx != 0 )
+    {
+        antSwitch = 1;
+    }
+    else
+    {
+        antSwitch = 0;
+    }
+}
+
+bool SX1272MB1xAS::CheckRfFrequency( uint32_t frequency )
+{
+      debug("CheckRfFrequency\r\n");
+    //TODO: Implement check, currently all frequencies are supported
+    return true;
+}
+
+
+void SX1272MB1xAS::Reset( void )
+{
+       debug("Reset\r\n");
+   reset.output();
+    reset = 0;
+    wait_ms( 1 );
+    reset.input();
+    wait_ms( 6 );
+}
+    
+void SX1272MB1xAS::Write( uint8_t addr, uint8_t data )
+{
+       debug("Write %02X %02X\r\n",addr, data);
+    Write( addr, &data, 1 );
+}
+
+uint8_t SX1272MB1xAS::Read( uint8_t addr )
+{
+     uint8_t data;
+    Read( addr, &data, 1 );
+      debug("Read %02X %02X\r\n",addr ,data);
+    return data;
+}
+
+void SX1272MB1xAS::Write( uint8_t addr, uint8_t *buffer, uint8_t size )
+{
+    uint8_t i;
+
+    nss = 0;
+    spi.write( addr | 0x80 );
+    for( i = 0; i < size; i++ )
+    {
+        spi.write( buffer[i] );
+    }
+    nss = 1;
+}
+
+void SX1272MB1xAS::Read( uint8_t addr, uint8_t *buffer, uint8_t size )
+{
+    uint8_t i;
+
+    nss = 0;
+    spi.write( addr & 0x7F );
+    for( i = 0; i < size; i++ )
+    {
+        buffer[i] = spi.write( 0 );
+    }
+    nss = 1;
+}
+
+void SX1272MB1xAS::WriteFifo( uint8_t *buffer, uint8_t size )
+{
+      debug("WriteFifo\r\n");
+    Write( 0, buffer, size );
+}
+
+void SX1272MB1xAS::ReadFifo( uint8_t *buffer, uint8_t size )
+{
+      debug("ReadFifo\r\n");
+    Read( 0, buffer, size );
+}