Tom Kreyche / ADT7410

Library for ADT7410 I2C temperature sensor. Use this instead of TMP102 when you need to measure temperatures lower than -40 degrees C. The device is guaranteed to work at -55 C but will actually read lower temps. See http://mbed.org/users/tkreyche/notebook/adt7140-i2c-temperature-sensor/ for more info.

Dependents:   BLE_ADT7410_TMP102_Sample BLE_HTM_HRM1017 BLENano_SimpleTemplate_temp_170802 BLENano_SimpleTemplate_temp_170813 ... more

History

default tip

2011-02-01, by tkreyche [Tue, 01 Feb 2011 19:33:56 +0000] rev 8

2011-02-01, by tkreyche [Tue, 01 Feb 2011 19:27:42 +0000] rev 7

2011-02-01, by tkreyche [Tue, 01 Feb 2011 19:24:39 +0000] rev 6

2011-02-01, by tkreyche [Tue, 01 Feb 2011 19:22:03 +0000] rev 5

2011-02-01, by tkreyche [Tue, 01 Feb 2011 19:16:47 +0000] rev 4

2011-02-01, by tkreyche [Tue, 01 Feb 2011 19:10:49 +0000] rev 3

2011-02-01, by tkreyche [Tue, 01 Feb 2011 19:05:30 +0000] rev 2

2011-02-01, by tkreyche [Tue, 01 Feb 2011 19:00:32 +0000] rev 1

2011-02-01, by tkreyche [Tue, 01 Feb 2011 18:57:41 +0000] rev 0