hairo
Dependencies: mbed BufferedSerial
Diff: ros/node_handle.h
- Revision:
- 0:9e9b7db60fd5
diff -r 000000000000 -r 9e9b7db60fd5 ros/node_handle.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/ros/node_handle.h Sat Dec 31 00:48:34 2016 +0000 @@ -0,0 +1,543 @@ +/* + * Software License Agreement (BSD License) + * + * Copyright (c) 2011, Willow Garage, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials provided + * with the distribution. + * * Neither the name of Willow Garage, Inc. nor the names of its + * contributors may be used to endorse or promote prducts derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef ROS_NODE_HANDLE_H_ +#define ROS_NODE_HANDLE_H_ + +#include <stdint.h> + +#include "std_msgs/Time.h" +#include "rosserial_msgs/TopicInfo.h" +#include "rosserial_msgs/Log.h" +#include "rosserial_msgs/RequestParam.h" + +#define SYNC_SECONDS 5 + +#define MODE_FIRST_FF 0 +/* + * The second sync byte is a protocol version. It's value is 0xff for the first + * version of the rosserial protocol (used up to hydro), 0xfe for the second version + * (introduced in hydro), 0xfd for the next, and so on. Its purpose is to enable + * detection of mismatched protocol versions (e.g. hydro rosserial_python with groovy + * rosserial_arduino. It must be changed in both this file and in + * rosserial_python/src/rosserial_python/SerialClient.py + */ +#define MODE_PROTOCOL_VER 1 +#define PROTOCOL_VER1 0xff // through groovy +#define PROTOCOL_VER2 0xfe // in hydro +#define PROTOCOL_VER PROTOCOL_VER2 +#define MODE_SIZE_L 2 +#define MODE_SIZE_H 3 +#define MODE_SIZE_CHECKSUM 4 // checksum for msg size received from size L and H +#define MODE_TOPIC_L 5 // waiting for topic id +#define MODE_TOPIC_H 6 +#define MODE_MESSAGE 7 +#define MODE_MSG_CHECKSUM 8 // checksum for msg and topic id + + +#define MSG_TIMEOUT 20 //20 milliseconds to recieve all of message data + +#include "ros/msg.h" + +namespace ros { + + class NodeHandleBase_{ + public: + virtual int publish(int id, const Msg* msg)=0; + virtual int spinOnce()=0; + virtual bool connected()=0; + }; +} + +#include "ros/publisher.h" +#include "ros/subscriber.h" +#include "ros/service_server.h" +#include "ros/service_client.h" + +namespace ros { + + using rosserial_msgs::TopicInfo; + + /* Node Handle */ + template<class Hardware, + int MAX_SUBSCRIBERS=25, + int MAX_PUBLISHERS=25, + int INPUT_SIZE=512, + int OUTPUT_SIZE=512> + class NodeHandle_ : public NodeHandleBase_ + { + protected: + Hardware hardware_; + + /* time used for syncing */ + uint32_t rt_time; + + /* used for computing current time */ + uint32_t sec_offset, nsec_offset; + + uint8_t message_in[INPUT_SIZE]; + uint8_t message_out[OUTPUT_SIZE]; + + Publisher * publishers[MAX_PUBLISHERS]; + Subscriber_ * subscribers[MAX_SUBSCRIBERS]; + + /* + * Setup Functions + */ + public: + NodeHandle_() : configured_(false) { + + for(unsigned int i=0; i< MAX_PUBLISHERS; i++) + publishers[i] = 0; + + for(unsigned int i=0; i< MAX_SUBSCRIBERS; i++) + subscribers[i] = 0; + + for(unsigned int i=0; i< INPUT_SIZE; i++) + message_in[i] = 0; + + for(unsigned int i=0; i< OUTPUT_SIZE; i++) + message_out[i] = 0; + + req_param_resp.ints_length = 0; + req_param_resp.ints = NULL; + req_param_resp.floats_length = 0; + req_param_resp.floats = NULL; + req_param_resp.ints_length = 0; + req_param_resp.ints = NULL; + } + + Hardware* getHardware(){ + return &hardware_; + } + + /* Start serial, initialize buffers */ + void initNode(){ + hardware_.init(); + mode_ = 0; + bytes_ = 0; + index_ = 0; + topic_ = 0; + }; + + /* Start a named port, which may be network server IP, initialize buffers */ + void initNode(char *portName){ + hardware_.init(portName); + mode_ = 0; + bytes_ = 0; + index_ = 0; + topic_ = 0; + }; + + protected: + //State machine variables for spinOnce + int mode_; + int bytes_; + int topic_; + int index_; + int checksum_; + + bool configured_; + + /* used for syncing the time */ + uint32_t last_sync_time; + uint32_t last_sync_receive_time; + uint32_t last_msg_timeout_time; + + public: + /* This function goes in your loop() function, it handles + * serial input and callbacks for subscribers. + */ + + + virtual int spinOnce(){ + + /* restart if timed out */ + uint32_t c_time = hardware_.time(); + if( (c_time - last_sync_receive_time) > (SYNC_SECONDS*2200) ){ + configured_ = false; + } + + /* reset if message has timed out */ + if ( mode_ != MODE_FIRST_FF){ + if (c_time > last_msg_timeout_time){ + mode_ = MODE_FIRST_FF; + } + } + + /* while available buffer, read data */ + while( true ) + { + int data = hardware_.read(); + if( data < 0 ) + break; + checksum_ += data; + if( mode_ == MODE_MESSAGE ){ /* message data being recieved */ + message_in[index_++] = data; + bytes_--; + if(bytes_ == 0) /* is message complete? if so, checksum */ + mode_ = MODE_MSG_CHECKSUM; + }else if( mode_ == MODE_FIRST_FF ){ + if(data == 0xff){ + mode_++; + last_msg_timeout_time = c_time + MSG_TIMEOUT; + } + else if( hardware_.time() - c_time > (SYNC_SECONDS)){ + /* We have been stuck in spinOnce too long, return error */ + configured_=false; + return -2; + } + }else if( mode_ == MODE_PROTOCOL_VER ){ + if(data == PROTOCOL_VER){ + mode_++; + }else{ + mode_ = MODE_FIRST_FF; + if (configured_ == false) + requestSyncTime(); /* send a msg back showing our protocol version */ + } + }else if( mode_ == MODE_SIZE_L ){ /* bottom half of message size */ + bytes_ = data; + index_ = 0; + mode_++; + checksum_ = data; /* first byte for calculating size checksum */ + }else if( mode_ == MODE_SIZE_H ){ /* top half of message size */ + bytes_ += data<<8; + mode_++; + }else if( mode_ == MODE_SIZE_CHECKSUM ){ + if( (checksum_%256) == 255) + mode_++; + else + mode_ = MODE_FIRST_FF; /* Abandon the frame if the msg len is wrong */ + }else if( mode_ == MODE_TOPIC_L ){ /* bottom half of topic id */ + topic_ = data; + mode_++; + checksum_ = data; /* first byte included in checksum */ + }else if( mode_ == MODE_TOPIC_H ){ /* top half of topic id */ + topic_ += data<<8; + mode_ = MODE_MESSAGE; + if(bytes_ == 0) + mode_ = MODE_MSG_CHECKSUM; + }else if( mode_ == MODE_MSG_CHECKSUM ){ /* do checksum */ + mode_ = MODE_FIRST_FF; + if( (checksum_%256) == 255){ + if(topic_ == TopicInfo::ID_PUBLISHER){ + requestSyncTime(); + negotiateTopics(); + last_sync_time = c_time; + last_sync_receive_time = c_time; + return -1; + }else if(topic_ == TopicInfo::ID_TIME){ + syncTime(message_in); + }else if (topic_ == TopicInfo::ID_PARAMETER_REQUEST){ + req_param_resp.deserialize(message_in); + param_recieved= true; + }else if(topic_ == TopicInfo::ID_TX_STOP){ + configured_ = false; + }else{ + if(subscribers[topic_-100]) + subscribers[topic_-100]->callback( message_in ); + } + } + } + } + + /* occasionally sync time */ + if( configured_ && ((c_time-last_sync_time) > (SYNC_SECONDS*500) )){ + requestSyncTime(); + last_sync_time = c_time; + } + + return 0; + } + + + /* Are we connected to the PC? */ + virtual bool connected() { + return configured_; + }; + + /******************************************************************** + * Time functions + */ + + void requestSyncTime() + { + std_msgs::Time t; + publish(TopicInfo::ID_TIME, &t); + rt_time = hardware_.time(); + } + + void syncTime(uint8_t * data) + { + std_msgs::Time t; + uint32_t offset = hardware_.time() - rt_time; + + t.deserialize(data); + t.data.sec += offset/1000; + t.data.nsec += (offset%1000)*1000000UL; + + this->setNow(t.data); + last_sync_receive_time = hardware_.time(); + } + + Time now() + { + uint32_t ms = hardware_.time(); + Time current_time; + current_time.sec = ms/1000 + sec_offset; + current_time.nsec = (ms%1000)*1000000UL + nsec_offset; + normalizeSecNSec(current_time.sec, current_time.nsec); + return current_time; + } + + void setNow( Time & new_now ) + { + uint32_t ms = hardware_.time(); + sec_offset = new_now.sec - ms/1000 - 1; + nsec_offset = new_now.nsec - (ms%1000)*1000000UL + 1000000000UL; + normalizeSecNSec(sec_offset, nsec_offset); + } + + /******************************************************************** + * Topic Management + */ + + /* Register a new publisher */ + bool advertise(Publisher & p) + { + for(int i = 0; i < MAX_PUBLISHERS; i++){ + if(publishers[i] == 0){ // empty slot + publishers[i] = &p; + p.id_ = i+100+MAX_SUBSCRIBERS; + p.nh_ = this; + return true; + } + } + return false; + } + + /* Register a new subscriber */ + template<typename SubscriberT> + bool subscribe(SubscriberT& s){ + for(int i = 0; i < MAX_SUBSCRIBERS; i++){ + if(subscribers[i] == 0){ // empty slot + subscribers[i] = static_cast<Subscriber_*>(&s); + s.id_ = i+100; + return true; + } + } + return false; + } + + /* Register a new Service Server */ + template<typename MReq, typename MRes> + bool advertiseService(ServiceServer<MReq,MRes>& srv){ + bool v = advertise(srv.pub); + for(int i = 0; i < MAX_SUBSCRIBERS; i++){ + if(subscribers[i] == 0){ // empty slot + subscribers[i] = static_cast<Subscriber_*>(&srv); + srv.id_ = i+100; + return v; + } + } + return false; + } + + /* Register a new Service Client */ + template<typename MReq, typename MRes> + bool serviceClient(ServiceClient<MReq, MRes>& srv){ + bool v = advertise(srv.pub); + for(int i = 0; i < MAX_SUBSCRIBERS; i++){ + if(subscribers[i] == 0){ // empty slot + subscribers[i] = static_cast<Subscriber_*>(&srv); + srv.id_ = i+100; + return v; + } + } + return false; + } + + void negotiateTopics() + { + rosserial_msgs::TopicInfo ti; + int i; + for(i = 0; i < MAX_PUBLISHERS; i++) + { + if(publishers[i] != 0) // non-empty slot + { + ti.topic_id = publishers[i]->id_; + ti.topic_name = (char *) publishers[i]->topic_; + ti.message_type = (char *) publishers[i]->msg_->getType(); + ti.md5sum = (char *) publishers[i]->msg_->getMD5(); + ti.buffer_size = OUTPUT_SIZE; + publish( publishers[i]->getEndpointType(), &ti ); + } + } + for(i = 0; i < MAX_SUBSCRIBERS; i++) + { + if(subscribers[i] != 0) // non-empty slot + { + ti.topic_id = subscribers[i]->id_; + ti.topic_name = (char *) subscribers[i]->topic_; + ti.message_type = (char *) subscribers[i]->getMsgType(); + ti.md5sum = (char *) subscribers[i]->getMsgMD5(); + ti.buffer_size = INPUT_SIZE; + publish( subscribers[i]->getEndpointType(), &ti ); + } + } + configured_ = true; + } + + virtual int publish(int id, const Msg * msg) + { + if(id >= 100 && !configured_) + return 0; + + /* serialize message */ + uint16_t l = msg->serialize(message_out+7); + + /* setup the header */ + message_out[0] = 0xff; + message_out[1] = PROTOCOL_VER; + message_out[2] = (uint8_t) ((uint16_t)l&255); + message_out[3] = (uint8_t) ((uint16_t)l>>8); + message_out[4] = 255 - ((message_out[2] + message_out[3])%256); + message_out[5] = (uint8_t) ((int16_t)id&255); + message_out[6] = (uint8_t) ((int16_t)id>>8); + + /* calculate checksum */ + int chk = 0; + for(int i =5; i<l+7; i++) + chk += message_out[i]; + l += 7; + message_out[l++] = 255 - (chk%256); + + if( l <= OUTPUT_SIZE ){ + hardware_.write(message_out, l); + return l; + }else{ + logerror("Message from device dropped: message larger than buffer."); + return -1; + } + } + + /******************************************************************** + * Logging + */ + + private: + void log(char byte, const char * msg){ + rosserial_msgs::Log l; + l.level= byte; + l.msg = (char*)msg; + publish(rosserial_msgs::TopicInfo::ID_LOG, &l); + } + + public: + void logdebug(const char* msg){ + log(rosserial_msgs::Log::ROSDEBUG, msg); + } + void loginfo(const char * msg){ + log(rosserial_msgs::Log::INFO, msg); + } + void logwarn(const char *msg){ + log(rosserial_msgs::Log::WARN, msg); + } + void logerror(const char*msg){ + log(rosserial_msgs::Log::ERROR, msg); + } + void logfatal(const char*msg){ + log(rosserial_msgs::Log::FATAL, msg); + } + + /******************************************************************** + * Parameters + */ + + private: + bool param_recieved; + rosserial_msgs::RequestParamResponse req_param_resp; + + bool requestParam(const char * name, int time_out = 1000){ + param_recieved = false; + rosserial_msgs::RequestParamRequest req; + req.name = (char*)name; + publish(TopicInfo::ID_PARAMETER_REQUEST, &req); + uint16_t end_time = hardware_.time() + time_out; + while(!param_recieved ){ + spinOnce(); + if (hardware_.time() > end_time) return false; + } + return true; + } + + public: + bool getParam(const char* name, int* param, int length =1){ + if (requestParam(name) ){ + if (length == req_param_resp.ints_length){ + //copy it over + for(int i=0; i<length; i++) + param[i] = req_param_resp.ints[i]; + return true; + } + } + return false; + } + bool getParam(const char* name, float* param, int length=1){ + if (requestParam(name) ){ + if (length == req_param_resp.floats_length){ + //copy it over + for(int i=0; i<length; i++) + param[i] = req_param_resp.floats[i]; + return true; + } + } + return false; + } + bool getParam(const char* name, char** param, int length=1){ + if (requestParam(name) ){ + if (length == req_param_resp.strings_length){ + //copy it over + for(int i=0; i<length; i++) + strcpy(param[i],req_param_resp.strings[i]); + return true; + } + } + return false; + } + }; + +} + +#endif