File content as of revision 13:f10d9b166652:

#pragma once
/*^^^^^^^^^^^^^^^^      LCD HARDWARE CONECTION ^^^^^^^^^^^^^^^^^^^^^^^^*/
#define  _LCDFRONTPLANES   (8)            // # of frontPlanes
#define  _LCDBACKPLANES    (4)            // # of backplanes

/*
   LCD logical organization definition
   This section indicates how the LCD is distributed  how many characteres of (7-seg, 14,seg, 16 seg, or colums in case of Dot Matrix) does it contain
   First character is forced only one can be written

*/
// HARDWARE_CONFIG Changing LCD pins Allows to verify all LCD pins easily
// if HARDWARE_CONFIG  == 0 FRDM-KL46 RevB
// if HARDWARE_CONFIG  == 1 FRDM-KL46 RevA
#ifdef FRDM_REVA
#define HARDWARE_CONFIG 1
#else
#define HARDWARE_CONFIG 0
#endif

#define _CHARNUM     (4)  //number of chars that can be written
#define _CHAR_SIZE   (2)  // Used only when Dot Matrix is used
#define _LCDTYPE     (2)  //indicate how many LCD_WF are required to write a single Character

/*
  Following definitions indicate how characters are associated to waveform
*/
/* Hardware configuration  */
#if HARDWARE_CONFIG == 0

// LCD PIN1 to LCDWF0  Rev B
#define   CHAR1a    37      // LCD Pin 5
#define   CHAR1b    17      // LCD Pin 6
#define   CHAR2a    7       // LCD Pin 7
#define   CHAR2b    8       // LCD Pin 8
#define   CHAR3a    53      // LCD Pin 9
#define   CHAR3b    38      // LCD Pin 10
#define   CHAR4a    10      // LCD Pin 11
#define   CHAR4b    11      // LCD Pin 12
#define   CHARCOM0    40    // LCD Pin 1
#define   CHARCOM1    52    // LCD Pin 2
#define   CHARCOM2    19    // LCD Pin 3
#define   CHARCOM3    18    // LCD Pin 4

// LCD PIN1 to LCDWF2   for FRDM-KL46Z
#elif HARDWARE_CONFIG == 1
#define   CHAR1a    37      // LCD Pin 5
#define   CHAR1b    17      // LCD Pin 6
#define   CHAR2a    7       // LCD Pin 7
#define   CHAR2b    8       // LCD Pin 8
#define   CHAR3a    12      // LCD Pin 9
#define   CHAR3b    26      // LCD Pin 10
#define   CHAR4a    10      // LCD Pin 11
#define   CHAR4b    11      // LCD Pin 12
#define   CHARCOM0    51    // LCD Pin 1
#define   CHARCOM1    52    // LCD Pin 2
#define   CHARCOM2    19    // LCD Pin 3
#define   CHARCOM3    16    // LCD Pin 4

#endif


/*Ascii Codification table information */
#define ASCCI_TABLE_START '0'   // indicates which is the first Ascii character in the table
#define ASCCI_TABLE_END   'Z'   // indicates which is the first Ascii character in the table
#define BLANK_CHARACTER   '>'  // Indicate which ASCII character is a blank character (depends on ASCII table)

#define _ALLON 0xFF     // Used for ALL_on function 

#define SEGDP 0x01
#define SEGC  0x02
#define SEGB  0x04
#define SEGA  0x08

#define SEGD  0x01
#define SEGE  0x02
#define SEGG  0x04
#define SEGF  0x08


/* Fault detect initial limits */

/* Fault detect initial parameters and limits */
#define FAULTD_FP_FDPRS  FDPRS_32
#define FAULTD_FP_FDSWW  FDSWW_128
#define FAULTD_BP_FDPRS  FDPRS_64
#define FAULTD_BP_FDSWW  FDSWW_128

#define FAULTD_FP_HI  127
#define FAULTD_FP_LO  110
#define FAULTD_BP_HI  127
#define FAULTD_BP_LO  110
#define FAULTD_TIME   6

extern const uint8_t  WF_ORDERING_TABLE[];   //   Logical Front plane N to LCD_WFx