Diff: FRDM-s401.h

Revision:

3:f70873bc6121

Parent:

1:1579bcd31410

Child:

6:f4773221794b

--- a/FRDM-s401.h	Mon Jan 20 21:08:32 2014 +0000
+++ b/FRDM-s401.h	Mon Jan 27 21:57:38 2014 +0000
@@ -1,12 +1,10 @@
-#ifndef __FRDM_S401_H_
-#define __FRDM_S401_H_
 /*^^^^^^^^^^^^^^^^      LCD HARDWARE CONECTION ^^^^^^^^^^^^^^^^^^^^^^^^*/
 #define  _LCDFRONTPLANES   (8)            // # of frontPlanes
 #define  _LCDBACKPLANES    (4)            // # of backplanes
 
 /*
    LCD logical organization definition
-    This section indicate how the LCD is distributed  how many characteres of (7-seg, 14,seg, 16 seg, or colums in case of Dot Matrix) does it contain
+   This section indicates how the LCD is distributed  how many characteres of (7-seg, 14,seg, 16 seg, or colums in case of Dot Matrix) does it contain
    First character is forced only one can be written
 
 */
@@ -21,7 +19,7 @@
 
 #define _CHARNUM     (4)  //number of chars that can be written
 #define _CHAR_SIZE   (2)  // Used only when Dot Matrix is used
-#define _LCDTYPE     (2)  //indicate how many LCD_WF are required to write a single Character / or Column in case of DOT matrix LCD
+#define _LCDTYPE     (2)  //indicate how many LCD_WF are required to write a single Character
 
 /*
   Following definitions indicate how characters are associated to waveform
@@ -30,46 +28,33 @@
 #if HARDWARE_CONFIG == 0
 
 // LCD PIN1 to LCDWF0  Rev B
-#define   CHAR1a    37 // LCD Pin 5
-#define   CHAR1b    17 // LCD Pin 6
-#define   CHAR2a    7 // LCD Pin 7
-#define   CHAR2b    8 // LCD Pin 8
-#define   CHAR3a    53 // LCD Pin 9
-#define   CHAR3b    38 // LCD Pin 10
-#define   CHAR4a    10 // LCD Pin 11
-#define   CHAR4b    11 // LCD Pin 12
-#define   CHARCOM0    40 // LCD Pin 1
-#define   CHARCOM1    52 // LCD Pin 2
-#define   CHARCOM2    19 // LCD Pin 3
-#define   CHARCOM3    18 // LCD Pin 4
-
-/*Special Symbols */
-#define SPECIAL_SYMBOL_COUNT   4
-
-#define   _LCD_DP1_ON()      SymbolON(17,0)
-#define   _LCD_DP2_ON()      SymbolON(8,0)
-#define   _LCD_DP3_ON()      SymbolON(38,0)
-#define   _LCD_COL_ON()      SymbolON(11,0)
-
-#define   _LCD_DP1_OFF()      SymbolOFF(17,0)
-#define   _LCD_DP2_OFF()      SymbolOFF(8,0)
-#define   _LCD_DP3_OFF()      SymbolOFF(38,0)
-#define   _LCD_COL_OFF()      SymbolOFF(11,0)
+#define   CHAR1a    37      // LCD Pin 5
+#define   CHAR1b    17      // LCD Pin 6
+#define   CHAR2a    7       // LCD Pin 7
+#define   CHAR2b    8       // LCD Pin 8
+#define   CHAR3a    53      // LCD Pin 9
+#define   CHAR3b    38      // LCD Pin 10
+#define   CHAR4a    10      // LCD Pin 11
+#define   CHAR4b    11      // LCD Pin 12
+#define   CHARCOM0    40    // LCD Pin 1
+#define   CHARCOM1    52    // LCD Pin 2
+#define   CHARCOM2    19    // LCD Pin 3
+#define   CHARCOM3    18    // LCD Pin 4
 
 // LCD PIN1 to LCDWF2   for FRDM-KL46Z
 #elif HARDWARE_CONFIG == 1
-#define   CHAR1a    37 // LCD Pin 5
-#define   CHAR1b    17 // LCD Pin 6
-#define   CHAR2a    7 // LCD Pin 7
-#define   CHAR2b    8 // LCD Pin 8
-#define   CHAR3a    12 // LCD Pin 9
-#define   CHAR3b    26 // LCD Pin 10
-#define   CHAR4a    10 // LCD Pin 11
-#define   CHAR4b    11 // LCD Pin 12
-#define   CHARCOM0    51 // LCD Pin 1
-#define   CHARCOM1    52 // LCD Pin 2
-#define   CHARCOM2    19 // LCD Pin 3
-#define   CHARCOM3    16 // LCD Pin 4
+#define   CHAR1a    37      // LCD Pin 5
+#define   CHAR1b    17      // LCD Pin 6
+#define   CHAR2a    7       // LCD Pin 7
+#define   CHAR2b    8       // LCD Pin 8
+#define   CHAR3a    12      // LCD Pin 9
+#define   CHAR3b    26      // LCD Pin 10
+#define   CHAR4a    10      // LCD Pin 11
+#define   CHAR4b    11      // LCD Pin 12
+#define   CHARCOM0    51    // LCD Pin 1
+#define   CHARCOM1    52    // LCD Pin 2
+#define   CHARCOM2    19    // LCD Pin 3
+#define   CHARCOM3    16    // LCD Pin 4
 
 #endif
 
@@ -106,9 +91,6 @@
 #define FAULTD_BP_LO  110
 #define FAULTD_TIME   6
 
-extern const uint8_t  WF_ORDERING_TABLE[];              //   Logical Front plane N to LCD_WFx
-//extern const char  ASCII_TO_WF_CODIFICATION_TABLE[]; //   ASCII to 7x5 Dot Matrix
-
-#endif /* __FRDM_S401_H_ */
+extern const uint8_t  WF_ORDERING_TABLE[];   //   Logical Front plane N to LCD_WFx