tim004 tim004
Predrag Simanić
Revision 0:4fd50fc0dbd7, committed 2014-05-12
- Comitter:
- tim004
- Date:
- Mon May 12 15:59:56 2014 +0000
- Commit message:
- LV9_Grupa3_Tim004_PAI_Zadatak2
Changed in this revision
diff -r 000000000000 -r 4fd50fc0dbd7 main.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp Mon May 12 15:59:56 2014 +0000
@@ -0,0 +1,64 @@
+#include "mbed.h"
+#include "sMotor.h"
+
+
+Serial pc(USBTX, USBRX);
+sMotor motor(dp9, dp10, dp11, dp13); // creates new stepper motor: IN1, IN2, IN3, IN4
+
+int step_speed = 1200 ; // set default motor speed
+int numstep = 512 ; // defines full turn of 360 degree
+int direction = 0;
+bool on=true;
+//you might want to calibrate this value according to your motor
+
+
+int main() {
+ l1:
+ pc.printf("1- Izbor polozaja motora\n\r");
+ pc.printf("2- Izbor smjera kretanja motora\n\r");
+ pc.printf("3- Promjena brzine kretanja motora\n\r");
+ pc.printf("4- Pokretanje/zaustavljanje motora\n\r");
+
+ while (1) {
+ if (pc.readable()) { // checks for serial
+
+ if (pc.getc()=='1'){
+ if(on)
+ {
+ int angle;
+ pc.printf("Navedite ugao pomjeranja motora: \n\r");
+ pc.scanf("%d", &angle);
+ if ( angle > 0 )
+ motor.step(numstep / 360 * (angle % 360), direction, step_speed);
+ else
+ motor.step(numstep / 360 * (angle % 360), 1 - direction, step_speed);
+ }
+ else
+ pc.printf("Motor je zaustavljen. \n\r");
+ goto l1;
+ }else
+ if (pc.getc()=='2'){
+ pc.printf("\n Doslo je do promjene smjera. \n\r");
+ direction=1-direction;
+ goto l1;
+ }else
+ if (pc.getc()=='3'){
+ pc.printf("Trenutna brzina: %d\n\r", step_speed);
+ pc.printf("Nova brzina: \n\r");
+ pc.scanf("%d",&step_speed);
+ goto l1;
+ }else
+ if (pc.getc()=='4'){
+ on=!on;
+ if(on){
+ pc.printf("Motor je pokrenut.\n\r");
+
+ }
+ else{
+ pc.printf("Motor je zaustavljen. \n\r");}
+ goto l1;
+ }
+ else goto l1;
+ }
+ }
+}
\ No newline at end of file
diff -r 000000000000 -r 4fd50fc0dbd7 mbed.bld --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed.bld Mon May 12 15:59:56 2014 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/mbed_official/code/mbed/builds/8a40adfe8776 \ No newline at end of file
diff -r 000000000000 -r 4fd50fc0dbd7 sMotor.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/sMotor.lib Mon May 12 15:59:56 2014 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/XtaticO/code/sMotor/#4b3b9e047ce3