Diff: dSPIN.h

Revision:

0:3a9b958ba85f

diff -r 000000000000 -r 3a9b958ba85f dSPIN.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/dSPIN.h	Mon Jul 09 14:40:14 2012 +0000
@@ -0,0 +1,114 @@
+/**
+ * @author Eric Lieser
+ *
+ * @section LICENSE
+ *
+ * Copyright (c) 2010 ARM Limited
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * @section DESCRIPTION
+ *
+ * ST Microelectronics L6470 dSPIN fully integrated microstepping motor driver
+ * with motion engine and SPI
+ *
+ * Datasheet: http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATASHEET/CD00255075.pdf
+ *
+ *
+ */
+
+#ifndef dSPIN_H
+#define dSPIN_H
+
+
+/**
+ * Includes
+ */
+#include "mbed.h"
+
+/**
+ * Defines
+ */
+#define ABS_POS         0x01        //length: 22      reset value: 0
+#define EL_POS          0x02        //length: 9       reset value: 0
+#define MARK            0x03        //length: 22      reset value: 0
+#define SPEED           0x04        //length: 20      reset value: 0
+#define ACC             0x05        //length: 12      reset value: 08A
+#define DEC             0x06        //length: 12      reset value: 08A
+#define MAX_SPEED       0x07        //length: 10      reset value: 41
+#define MIN_SPEED       0x08        //length: 13      reset value: 0
+#define FS_SPD          0x15        //length: 10      reset value: 027
+#define KVAL_HOLD       0x09        //length: 8       reset value: 29
+#define KVAL_RUN        0x0A        //length: 8       reset value: 29
+#define KVAL_ACC        0x0B        //length: 8       reset value: 29
+#define KVAL_DEC        0x0C        //length: 8       reset value: 29
+#define INT_SPD         0x0D        //length: 14      reset value: 0408
+#define ST_SLP          0x0E        //length: 8       reset value: 19
+#define FN_SLP_ACC      0x0F        //length: 8       reset value: 29
+#define FN_SLP_DEC      0x10        //length: 8       reset value: 29
+#define K_THERM         0x11        //length: 4       reset value: 0
+#define ADC_OUT         0x12        //length: 5       reset value: 
+#define OCD_TH          0x13        //length: 4       reset value: 8
+#define STALL_TH        0x14        //length: 7       reset value: 40
+#define STEP_MODE       0x16        //length: 8       reset value: 7
+#define ALARM_EN        0x17        //length: 8       reset value: FF
+#define CONFIG          0x18        //length: 16      reset value: 2E88
+#define STATUS          0x19        //length: 16      reset value:
+
+/**
+ * ST Micro dSPIN stepper motor controller
+ */
+class dSPIN {
+
+public:
+
+    /**
+     * Constructor.
+     *
+     * @param mosi mbed pin to use for MOSI line of SPI interface.
+     * @param miso mbed pin to use for MISO line of SPI interface.
+     * @param sck mbed pin to use for SCK line of SPI interface.
+     * @param cs mbed pin to use for not chip select line of SPI interface.
+     */
+    dSPIN(PinName mosi, PinName miso, PinName sck, PinName cs);
+    
+    void run(int dir, int speed);
+    
+    void move(int dir, int steps);
+    
+    void soft_stop(void);
+    
+    void set_param(char parameter, int length, int value);
+    
+    int get_param(char parameter, int length);
+    
+    int get_status(void);
+    
+    void reset_device(void);
+
+private:
+
+    SPI        spi_;
+    DigitalOut nCS_;
+
+};
+
+
+
+#endif /* dSPIN */