Diff: TextLCD_Config.h

Revision:

34:e5a0dcb43ecc

Child:

35:311be6444a39

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TextLCD_Config.h	Sat Sep 27 12:38:27 2014 +0000
@@ -0,0 +1,253 @@
+/* mbed TextLCD Library, for a 4-bit LCD based on HD44780
+ * Copyright (c) 2014, WH
+ *               2014, v01: WH, Extracted from TextLCD.h as of v14
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+#ifndef MBED_TEXTLCDCONFIG_H
+#define MBED_TEXTLCDCONFIG_H
+
+
+//Select hardware interface options to reduce memory footprint (multiple options allowed)
+#define LCD_I2C        1           /* I2C Expander PCF8574/MCP23008 */
+#define LCD_SPI        1           /* SPI Expander SN74595          */
+#define LCD_I2C_N      1           /* Native I2C bus     */
+#define LCD_SPI_N_3_9  1           /* Native SPI bus     */
+#define LCD_SPI_N_3_10 1           /* Native SPI bus     */
+#define LCD_SPI_N_3_16 1           /* Native SPI bus     */
+#define LCD_SPI_N_3_24 1           /* Native SPI bus     */
+#define LCD_SPI_N_4    1           /* Native SPI bus     */
+
+//Select options to reduce memory footprint (multiple options allowed)
+#define LCD_UDC        1           /* Enable predefined UDC example*/                
+#define LCD_PRINTF     1           /* Enable Stream implementation */                
+
+//Pin Defines for I2C PCF8574/PCF8574A or MCP23008 and SPI 74595 bus expander interfaces
+//LCD and serial portexpanders should be wired accordingly 
+//
+//Select Hardware module (one option only)
+#define DEFAULT        1
+#define ADAFRUIT       0
+#define DFROBOT        0
+
+//Select Hardware module (one option only)
+#if (DEFAULT==1)
+//Definitions for default (WH) mapping between serial port expander pins and LCD controller
+//This hardware supports the I2C bus expander (PCF8574/PCF8574A or MCP23008) and SPI bus expander (74595) interfaces
+//See https://mbed.org/cookbook/Text-LCD-Enhanced
+//
+//Note: LCD RW pin must be connected to GND
+//      E2 is used for LCD40x4 (second controller)
+//      BL may be used to control backlight
+#define D_LCD_PIN_D4   0
+#define D_LCD_PIN_D5   1
+#define D_LCD_PIN_D6   2
+#define D_LCD_PIN_D7   3
+#define D_LCD_PIN_RS   4
+#define D_LCD_PIN_E    5
+#define D_LCD_PIN_E2   6
+#define D_LCD_PIN_BL   7
+
+#define D_LCD_PIN_RW   D_LCD_PIN_E2
+
+//Select I2C Portexpander type (one option only)
+#define PCF8574        1
+#define MCP23008       0
+#endif
+
+#if (ADAFRUIT==1)
+//Definitions for Adafruit i2cspilcdbackpack mapping between serial port expander pins and LCD controller
+//This hardware supports both an I2C expander (MCP23008) and an SPI expander (74595) selectable by a jumper.
+//See http://www.ladyada.net/products/i2cspilcdbackpack
+//
+//Note: LCD RW pin must be kept LOW
+//      E2 is not available on this hardware and so it does not support LCD40x4 (second controller)
+//      BL is used to control backlight
+#define D_LCD_PIN_0    0
+#define D_LCD_PIN_RS   1
+#define D_LCD_PIN_E    2
+#define D_LCD_PIN_D4   3
+#define D_LCD_PIN_D5   4
+#define D_LCD_PIN_D6   5
+#define D_LCD_PIN_D7   6
+#define D_LCD_PIN_BL   7
+
+#define D_LCD_PIN_E2   D_LCD_PIN_0
+
+//Force I2C portexpander type
+#define PCF8574        0
+#define MCP23008       1
+#endif
+
+#if (DFROBOT==1)
+//Definitions for DFROBOT LCD2004 Module mapping between serial port expander pins and LCD controller
+//This hardware uses PCF8574 and is different from earlier/different Arduino I2C LCD displays
+//See http://arduino-info.wikispaces.com/LCD-Blue-I2C
+//
+//Note: LCD RW pin must be kept LOW
+//      E2 is not available on default Arduino hardware and so it does not support LCD40x4 (second controller)
+//      BL is used to control backlight, reverse logic: Low turns on Backlight. This is handled in setBacklight()
+#define D_LCD_PIN_RS   0
+#define D_LCD_PIN_RW   1
+#define D_LCD_PIN_E    2
+#define D_LCD_PIN_BL   3
+#define D_LCD_PIN_D4   4
+#define D_LCD_PIN_D5   5
+#define D_LCD_PIN_D6   6
+#define D_LCD_PIN_D7   7
+
+#define D_LCD_PIN_E2   D_LCD_PIN_RW
+
+//Force I2C portexpander type
+#define PCF8574        1
+#define MCP23008       0
+#endif
+
+
+//Bitpattern Defines for I2C PCF8574/PCF8574A, MCP23008 and SPI 74595 Bus expanders
+//
+#define D_LCD_D4       (1<<D_LCD_PIN_D4)
+#define D_LCD_D5       (1<<D_LCD_PIN_D5)
+#define D_LCD_D6       (1<<D_LCD_PIN_D6)
+#define D_LCD_D7       (1<<D_LCD_PIN_D7)
+#define D_LCD_RS       (1<<D_LCD_PIN_RS)
+#define D_LCD_E        (1<<D_LCD_PIN_E)
+#define D_LCD_E2       (1<<D_LCD_PIN_E2)
+#define D_LCD_BL       (1<<D_LCD_PIN_BL)
+//#define D_LCD_RW       (1<<D_LCD_PIN_RW)
+
+#define D_LCD_BUS_MSK  (D_LCD_D4 | D_LCD_D5 | D_LCD_D6 | D_LCD_D7)
+#define D_LCD_BUS_DEF  0x00
+
+/* PCF8574/PCF8574A I2C portexpander slave address */
+#define PCF8574_SA0    0x40
+#define PCF8574_SA1    0x42
+#define PCF8574_SA2    0x44
+#define PCF8574_SA3    0x46
+#define PCF8574_SA4    0x48
+#define PCF8574_SA5    0x4A
+#define PCF8574_SA6    0x4C
+#define PCF8574_SA7    0x4E
+
+#define PCF8574A_SA0   0x70
+#define PCF8574A_SA1   0x72
+#define PCF8574A_SA2   0x74
+#define PCF8574A_SA3   0x76
+#define PCF8574A_SA4   0x78
+#define PCF8574A_SA5   0x7A
+#define PCF8574A_SA6   0x7C
+#define PCF8574A_SA7   0x7E
+
+/* MCP23008 I2C portexpander slave address */
+#define MCP23008_SA0   0x40
+#define MCP23008_SA1   0x42
+#define MCP23008_SA2   0x44
+#define MCP23008_SA3   0x46
+#define MCP23008_SA4   0x48
+#define MCP23008_SA5   0x4A
+#define MCP23008_SA6   0x4C
+#define MCP23008_SA7   0x4E
+
+/* MCP23008 I2C portexpander internal registers */
+#define IODIR          0x00
+#define IPOL           0x01
+#define GPINTEN        0x02
+#define DEFVAL         0x03
+#define INTCON         0x04
+#define IOCON          0x05
+#define GPPU           0x06
+#define INTF           0x07
+#define INTCAP         0x08
+#define GPIO           0x09
+#define OLAT           0x0A
+
+/* ST7032i I2C slave address */
+#define ST7032_SA      0x7C
+
+/* ST7036i I2C slave address */
+#define ST7036_SA0     0x78
+#define ST7036_SA1     0x7A
+#define ST7036_SA2     0x7C
+#define ST7036_SA3     0x7E
+
+/* PCF21XX I2C slave address */
+#define PCF21XX_SA0    0x74
+#define PCF21XX_SA1    0x76
+
+/* AIP31068 I2C slave address */
+#define AIP31068_SA    0x7C
+
+/* SSD1803 I2C slave address */
+#define SSD1803_SA0    0x78
+#define SSD1803_SA1    0x7A
+
+/* US2066/SSD1311 I2C slave address */
+#define US2066_SA0     0x78
+#define US2066_SA1     0x7A
+
+/* AC780 I2C slave address */
+#define AC780_SA0      0x78
+#define AC780_SA1      0x7A
+#define AC780_SA2      0x7C
+#define AC780_SA3      0x7E
+
+//Some native I2C controllers dont support ACK. Set define to '0' to allow code to proceed even without ACK
+//#define LCD_I2C_ACK    0
+#define LCD_I2C_ACK    1
+
+
+// Contrast setting, 6 significant bits (only supported for controllers with extended features)
+// Voltage Multiplier setting, 2 or 3 significant bits (only supported for controllers with extended features)
+#define LCD_DEF_CONTRAST    0x20
+
+//ST7032 EastRising ERC1602FS-4 display
+//Contrast setting 6 significant bits
+//Voltage Multiplier setting 3 significant bits
+#define LCD_ST7032_CONTRAST 0x18
+#define LCD_ST7032_RAB      0x04
+
+//ST7036 EA DOGM1603 display
+//Contrast setting 6 significant bits
+//Voltage Multiplier setting 3 significant bits
+#define LCD_ST7036_CONTRAST 0x28
+#define LCD_ST7036_RAB      0x04
+
+//SSD1803 EA DOGM204 display
+//Contrast setting 6 significant bits
+//Voltage Multiplier setting 3 significant bits
+#define LCD_SSD1_CONTRAST   0x28
+#define LCD_SSD1_RAB        0x06
+
+//US2066/SSD1311 EastRising ER-OLEDM2002-4 display
+//Contrast setting 8 significant bits, use 6 for compatibility
+#define LCD_US20_CONTRAST   0x3F
+//#define LCD_US20_CONTRAST   0x1F
+
+//PCF2113, PCF2119 display
+//Contrast setting 6 significant bits
+//Voltage Multiplier setting 2 significant bits
+#define LCD_PCF2_CONTRAST   0x20
+#define LCD_PCF2_S12        0x02
+
+//PT6314 VFD display
+//Contrast setting 2 significant bits, use 6 for compatibility
+#define LCD_PT63_CONTRAST   0x3F
+
+
+#endif //MBED_TEXTLCDCONFIG_H
\ No newline at end of file