File content as of revision 2:c5bb7d34974d:

// TODO: update copyright notice

// Copyright 2013 Pervasive Displays, Inc.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at:
//
//   http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing,
// software distributed under the License is distributed on an
// "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either
// express or implied.  See the License for the specific language
// governing permissions and limitations under the License.


#include <limits.h>
#include <SPI.h>

#include "EPD.h"
#include <mbed.h>

// inline arrays
#define ARRAY(type, ...) ((type[]){__VA_ARGS__})
#define CU8(...) (ARRAY(const uint8_t, __VA_ARGS__))

Timer timer;

//thierry
//--origine SPI spi(p20, p22, p25);
//SPI spi(P0_25,P0_28,P0_29);



EPD_Class::EPD_Class(PinName Pin_EPD_CS, PinName Pin_PANEL_ON, PinName Pin_BORDER, PinName Pin_DISCHARGE, PinName Pin_PWM, PinName Pin_RESET, PinName Pin_BUSY,PinName Pin_MOSI,PinName Pin_MISO,PinName Pin_CLK) :
    EPD_Pin_EPD_CS(Pin_EPD_CS),
    EPD_Pin_PANEL_ON(Pin_PANEL_ON),
    EPD_Pin_BORDER(Pin_BORDER),
    EPD_Pin_DISCHARGE(Pin_DISCHARGE),
    EPD_Pin_PWM(Pin_PWM),
    EPD_Pin_RESET(Pin_RESET),
    EPD_Pin_BUSY(Pin_BUSY), 
    spi (Pin_MOSI,Pin_MISO,Pin_CLK)
    {
    
}

void EPD_Class::begin(EPD_size sz)
{
    this->size = sz;
    this->stage_time = 480; // milliseconds
    this->lines_per_display = 96;
    this->dots_per_line = 128;
    this->bytes_per_line = 128 / 8;
    this->bytes_per_scan = 96 / 4;
    this->filler = false;
    timer.start();
    this->EPD_Pin_PWM.period(1.0/300000.0);


    // display size dependant items
    {
        static uint8_t cs[] = {0x72, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0f, 0xff, 0x00};
        static uint8_t gs[] = {0x72, 0x03};
        this->channel_select = cs;
        this->channel_select_length = sizeof(cs);
        this->gate_source = gs;
        this->gate_source_length = sizeof(gs);
    }

    // set up size structure
    switch (size) {
    default:
    case EPD_1_44:  // default so no change
        break;

    case EPD_2_0: {
        this->lines_per_display = 96;
        this->dots_per_line = 200;
        this->bytes_per_line = 200 / 8;
        this->bytes_per_scan = 96 / 4;
        this->filler = true;
        static uint8_t cs[] = {0x72, 0x00, 0x00, 0x00, 0x00, 0x01, 0xff, 0xe0, 0x00};
        static uint8_t gs[] = {0x72, 0x03};
        this->channel_select = cs;
        this->channel_select_length = sizeof(cs);
        this->gate_source = gs;
        this->gate_source_length = sizeof(gs);
        break;
    }

    case EPD_2_7: {
        this->stage_time = 630; // milliseconds
        this->lines_per_display = 176;
        this->dots_per_line = 264;
        this->bytes_per_line = 264 / 8;
        this->bytes_per_scan = 176 / 4;
        this->filler = true;
        static uint8_t cs[] = {0x72, 0x00, 0x00, 0x00, 0x7f, 0xff, 0xfe, 0x00, 0x00};
        static uint8_t gs[] = {0x72, 0x00};
        this->channel_select = cs;
        this->channel_select_length = sizeof(cs);
        this->gate_source = gs;
        this->gate_source_length = sizeof(gs);
        break;
    }
    }

    this->factored_stage_time = this->stage_time;
}


void EPD_Class::start() {

    this->EPD_Pin_PWM = 0.5;
    this->EPD_Pin_RESET = 0;
    this->EPD_Pin_PANEL_ON = 0;
    this->EPD_Pin_DISCHARGE = 0;
    this->EPD_Pin_BORDER = 0;
    this->EPD_Pin_EPD_CS = 0;
    
    
    spi.format(8,0);
    spi.frequency(10000000);
    SPI_on();
    
    wait_ms(5);
    this->EPD_Pin_PANEL_ON = 1;
    wait_ms(10);

    this->EPD_Pin_RESET = 1;
    this->EPD_Pin_BORDER = 1;
    this->EPD_Pin_EPD_CS = 1;
    wait_ms(5);

    this->EPD_Pin_RESET = 0;
    wait_ms(5);

    this->EPD_Pin_RESET = 1;
    wait_ms(5);

    // wait for COG to become ready
    while (this->EPD_Pin_BUSY) {
    }

    // channel select
    wait_us(10);
    SPI_send(this->EPD_Pin_EPD_CS, CU8(0x70, 0x01), 2);
    wait_us(10);
    SPI_send(this->EPD_Pin_EPD_CS, this->channel_select, this->channel_select_length);

    // DC/DC frequency
    wait_us(10);
    SPI_send(this->EPD_Pin_EPD_CS, CU8(0x70, 0x06), 2);
    wait_us(10);
    SPI_send(this->EPD_Pin_EPD_CS, CU8(0x72, 0xff), 2);

    // high power mode osc
    wait_us(10);
    SPI_send(this->EPD_Pin_EPD_CS, CU8(0x70, 0x07), 2);
    wait_us(10);
    SPI_send(this->EPD_Pin_EPD_CS, CU8(0x72, 0x9d), 2);


    // disable ADC
    wait_us(10);
    SPI_send(this->EPD_Pin_EPD_CS, CU8(0x70, 0x08), 2);
    wait_us(10);
    SPI_send(this->EPD_Pin_EPD_CS, CU8(0x72, 0x00), 2);

    // Vcom level
    wait_us(10);
    SPI_send(this->EPD_Pin_EPD_CS, CU8(0x70, 0x09), 2);
    wait_us(10);
    SPI_send(this->EPD_Pin_EPD_CS, CU8(0x72, 0xd0, 0x00), 3);

    // gate and source voltage levels
    wait_us(10);
    SPI_send(this->EPD_Pin_EPD_CS, CU8(0x70, 0x04), 2);
    wait_us(10);
    SPI_send(this->EPD_Pin_EPD_CS, this->gate_source, this->gate_source_length);

    
    this->EPD_Pin_PWM = 0.5;
    wait_ms(5);  // pwm toggle >= 5ms

    // driver latch on
    wait_us(10);
    SPI_send(this->EPD_Pin_EPD_CS, CU8(0x70, 0x03), 2);
    wait_us(10);
    SPI_send(this->EPD_Pin_EPD_CS, CU8(0x72, 0x01), 2);

    // driver latch off
    wait_us(10);
    SPI_send(this->EPD_Pin_EPD_CS, CU8(0x70, 0x03), 2);
    wait_us(10);
    SPI_send(this->EPD_Pin_EPD_CS, CU8(0x72, 0x00), 2);

    wait_ms(5);

    // charge pump positive voltage on
    wait_us(10);
    SPI_send(this->EPD_Pin_EPD_CS, CU8(0x70, 0x05), 2);
    wait_us(10);
    SPI_send(this->EPD_Pin_EPD_CS, CU8(0x72, 0x01), 2);

    // final delay before PWM off
    wait_ms(30);
    this->EPD_Pin_PWM = 0;

    // charge pump negative voltage on
    wait_us(10);
    SPI_send(this->EPD_Pin_EPD_CS, CU8(0x70, 0x05), 2);
    wait_us(10);
    SPI_send(this->EPD_Pin_EPD_CS, CU8(0x72, 0x03), 2);

    wait_ms(30);

    // Vcom driver on
    wait_us(10);
    SPI_send(this->EPD_Pin_EPD_CS, CU8(0x70, 0x05), 2);
    wait_us(10);
    SPI_send(this->EPD_Pin_EPD_CS, CU8(0x72, 0x0f), 2);

    wait_ms(30);

    // output enable to disable
    wait_us(10);
    SPI_send(this->EPD_Pin_EPD_CS, CU8(0x70, 0x02), 2);
    wait_us(10);
    SPI_send(this->EPD_Pin_EPD_CS, CU8(0x72, 0x24), 2);
}


void EPD_Class::end() 
{
    // dummy frame
    //this->frame_fixed(0x55, EPD_normal);
    // dummy line and border
    if (EPD_1_44 == this->size) {
        // only for 1.44" EPD
        this->line(0x7fffu, 0, 0xaa, false, EPD_normal);

        wait_ms(250);

    } 
    else {
        // all other display sizes
        this->line(0x7fffu, 0, 0x55, false, EPD_normal);

        wait_ms(25);

        this->EPD_Pin_BORDER = 0;
        wait_ms(250);
        this->EPD_Pin_BORDER = 1;
    }
    SPI_on();
    // latch reset turn on
    wait_us(10);
    SPI_send(this->EPD_Pin_EPD_CS, CU8(0x70, 0x03), 2);
    wait_us(10);
    SPI_send(this->EPD_Pin_EPD_CS, CU8(0x72, 0x01), 2);

    // output enable off
    wait_us(10);
    SPI_send(this->EPD_Pin_EPD_CS, CU8(0x70, 0x02), 2);
    wait_us(10);
    SPI_send(this->EPD_Pin_EPD_CS, CU8(0x72, 0x05), 2);

    // Vcom power off
    wait_us(10);
    SPI_send(this->EPD_Pin_EPD_CS, CU8(0x70, 0x05), 2);
    wait_us(10);
    SPI_send(this->EPD_Pin_EPD_CS, CU8(0x72, 0x0e), 2);

    // power off negative charge pump
    wait_us(10);
    SPI_send(this->EPD_Pin_EPD_CS, CU8(0x70, 0x05), 2);
    wait_us(10);
    SPI_send(this->EPD_Pin_EPD_CS, CU8(0x72, 0x02), 2);

    // discharge
    wait_us(10);
    SPI_send(this->EPD_Pin_EPD_CS, CU8(0x70, 0x04), 2);
    wait_us(10);
    SPI_send(this->EPD_Pin_EPD_CS, CU8(0x72, 0x0c), 2);

    wait_ms(120);

    // all charge pumps off
    wait_us(10);
    SPI_send(this->EPD_Pin_EPD_CS, CU8(0x70, 0x05), 2);
    wait_us(10);
    SPI_send(this->EPD_Pin_EPD_CS, CU8(0x72, 0x00), 2);

    // turn of osc
    wait_us(10);
    SPI_send(this->EPD_Pin_EPD_CS, CU8(0x70, 0x07), 2);
    wait_us(10);
    SPI_send(this->EPD_Pin_EPD_CS, CU8(0x72, 0x0d), 2);

    // discharge internal - 1
    wait_us(10);
    SPI_send(this->EPD_Pin_EPD_CS, CU8(0x70, 0x04), 2);
    wait_us(10);
    SPI_send(this->EPD_Pin_EPD_CS, CU8(0x72, 0x50), 2);

    wait_ms(40);

    // discharge internal - 2
    wait_us(10);
    SPI_send(this->EPD_Pin_EPD_CS, CU8(0x70, 0x04), 2);
    wait_us(10);
    SPI_send(this->EPD_Pin_EPD_CS, CU8(0x72, 0xA0), 2);

    wait_ms(40);

    // discharge internal - 3
    wait_us(10);
    SPI_send(this->EPD_Pin_EPD_CS, CU8(0x70, 0x04), 2);
    wait_us(10);
    SPI_send(this->EPD_Pin_EPD_CS, CU8(0x72, 0x00), 2);
    // turn of power and all signals
    //

    wait_ms(10);
    this->EPD_Pin_RESET = 0;
    this->EPD_Pin_PANEL_ON = 0;
    this->EPD_Pin_BORDER = 0;

    // discharge pulse
    this->EPD_Pin_DISCHARGE = 1;
    wait_ms(250);
    this->EPD_Pin_DISCHARGE = 0;
    
    EPD_Pin_EPD_CS = 1;
}


// convert a temperature in Celcius to
// the scale factor for frame_*_repeat methods
int EPD_Class::temperature_to_factor_10x(int temperature) 
{
    if (temperature <= -10) {
        return 170;
    } else if (temperature <= -5) {
        return 120;
    } else if (temperature <= 5) {
        return 80;
    } else if (temperature <= 10) {
        return 40;
    } else if (temperature <= 15) {
        return 30;
    } else if (temperature <= 20) {
        return 20;
    } else if (temperature <= 40) {
        return 10;
    }
    return 7;
}


// One frame of data is the number of lines * rows. For example:
// The 1.44” frame of data is 96 lines * 128 dots.
// The 2” frame of data is 96 lines * 200 dots.
// The 2.7” frame of data is 176 lines * 264 dots.

// the image is arranged by line which matches the display size
// so smallest would have 96 * 32 bytes

void EPD_Class::frame_fixed(uint8_t fixed_value, EPD_stage stage, int from_line, int to_line) 
{
    for (uint8_t line = from_line; line < to_line; line++) 
    {
        this->line(line, 0, fixed_value, false, stage);
    }
}

void EPD_Class::frame_data(const uint8_t *image, EPD_stage stage, int from_line, int to_line)
{
    for (uint8_t line = from_line; line < to_line; line++) 
    {
        this->line(line, &image[(line - from_line) * this->bytes_per_line], 0, true, stage);
    }
}


void EPD_Class::frame_fixed_repeat(uint8_t fixed_value, EPD_stage stage, int from_line, int to_line) 
{
    long stage_time = this->factored_stage_time;
    do {
        unsigned long t_start = timer.read_ms();
        this->frame_fixed(fixed_value, stage, from_line, to_line);
        unsigned long t_end = timer.read_ms();
        if (t_end > t_start) {
            stage_time -= t_end - t_start;
        } else {
            stage_time -= t_start - t_end + 1 + ULONG_MAX;
        }
    } while (stage_time > 0);
}


void EPD_Class::frame_data_repeat(const uint8_t *image, EPD_stage stage, int from_line, int to_line) 
{

    long stage_time = this->factored_stage_time;

    do {
        unsigned long t_start = timer.read_ms();
        this->frame_data(image, stage, from_line, to_line);
        unsigned long t_end = timer.read_ms();
        if (t_end > t_start) {
            stage_time -= t_end - t_start;
        } else {
            stage_time -= t_start - t_end + 1 + ULONG_MAX;
        }
    } while (stage_time > 0);

}

void EPD_Class::line(uint16_t line, const uint8_t *data, uint8_t fixed_value, bool read_progmem, EPD_stage stage) 
{
    // charge pump voltage levels
    SPI_on();
    wait_us(10);
    SPI_send(this->EPD_Pin_EPD_CS, CU8(0x70, 0x04), 2);
    wait_us(10);
    SPI_send(this->EPD_Pin_EPD_CS, this->gate_source, this->gate_source_length);

    // send data
    wait_us(10);
    SPI_send(this->EPD_Pin_EPD_CS, CU8(0x70, 0x0a), 2);
    wait_us(10);

    // CS low
    this->EPD_Pin_EPD_CS = 0;
    SPI_put_wait(0x72, this->EPD_Pin_BUSY);
    
    // even pixels
    for (uint16_t b = this->bytes_per_line; b > 0; --b) 
    {
        if (0 != data) 
        {

            uint8_t pixels = data[b - 1] & 0xaa;
            
            
            switch(stage)
            {
                case EPD_compensate:  // B -> W, W -> B (Current Image)
                    pixels = 0xaa | ((pixels ^ 0xaa) >> 1);
                    break;
                    
                case EPD_white:       // B -> N, W -> W (Current Image)
                    pixels = 0x55 + ((pixels ^ 0xaa) >> 1);
                    break;
                    
                case EPD_inverse:     // B -> N, W -> B (New Image)
                    pixels = 0x55 | (pixels ^ 0xaa);
                    break;
                    
                case EPD_normal:       // B -> B, W -> W (New Image)
                    pixels = 0xaa | (pixels >> 1);
                    break;
            }
            
            SPI_put_wait(pixels, this->EPD_Pin_BUSY);
        } 
        else
        {
            SPI_put_wait(fixed_value, this->EPD_Pin_BUSY);
        }   
    }

    // scan line
    for (uint16_t b = 0; b < this->bytes_per_scan; ++b) 
    {
        if (line / 4 == b) 
        {
            SPI_put_wait(0xc0 >> (2 * (line & 0x03)), this->EPD_Pin_BUSY);
        } 
        else 
        {
            SPI_put_wait(0x00, this->EPD_Pin_BUSY);
        }
    }

    // odd pixels
    for (uint16_t b = 0; b < this->bytes_per_line; ++b) 
    {
        if (0 != data) 
        {
            uint8_t pixels = data[b] & 0x55;
            
            
            switch(stage) 
            {
                case EPD_compensate:  // B -> W, W -> B (Current Image)
                    pixels = 0xaa | (pixels ^ 0x55);
                    break;
                case EPD_white:       // B -> N, W -> W (Current Image)
                    pixels = 0x55 + (pixels ^ 0x55);
                    break;
                case EPD_inverse:     // B -> N, W -> B (New Image)
                    pixels = 0x55 | ((pixels ^ 0x55) << 1);
                    break;
                case EPD_normal:       // B -> B, W -> W (New Image)
                    pixels = 0xaa | pixels;
                    break;
            }
            uint8_t p1 = (pixels >> 6) & 0x03;
            uint8_t p2 = (pixels >> 4) & 0x03;
            uint8_t p3 = (pixels >> 2) & 0x03;
            uint8_t p4 = (pixels >> 0) & 0x03;
            pixels = (p1 << 0) | (p2 << 2) | (p3 << 4) | (p4 << 6);
            SPI_put_wait(pixels, this->EPD_Pin_BUSY);
        } 
        else 
        {
            SPI_put_wait(fixed_value, this->EPD_Pin_BUSY);
        }
    }

    if (this->filler) 
    {
        SPI_put_wait(0x00, this->EPD_Pin_BUSY);
    }

    // CS high
    this->EPD_Pin_EPD_CS = 1;

    // output data to panel
    wait_us(10);
    SPI_send(this->EPD_Pin_EPD_CS, CU8(0x70, 0x02), 2);
    wait_us(10);
    SPI_send(this->EPD_Pin_EPD_CS, CU8(0x72, 0x2f), 2);
}

void EPD_Class::SPI_on() {
    wait_us(10);
}


void EPD_Class::SPI_put(uint8_t c) {
    spi.write(c);
}


void EPD_Class::SPI_put_wait(uint8_t c, DigitalIn busy_pin) {

    SPI_put(c);

    // wait for COG ready
    while (1 == busy_pin) {
    }
}


void EPD_Class::SPI_send(DigitalOut cs_pin, const uint8_t *buffer, uint16_t length) {
    // CS low
    cs_pin = 0;

    // send all data
    for (uint16_t i = 0; i < length; ++i) {
        SPI_put(*buffer++);
    }

    // CS high
    cs_pin = 1;
}