Sébastien Posada Ramirez
Lib herkulex utilisée pour la carte du phare
fonctions_herkulex.cpp
- Committer:
- thesnowfoxy
- Date:
- 2021-07-12
- Revision:
- 19:aaa97ea138fd
- Parent:
- 18:41bce61db461
File content as of revision 19:aaa97ea138fd:
#include "mbed.h"
#include "fonctions_herkulex.h"
//#include "ident_crac.h"
Timer Time_out;
//-------------------------Définition des ports série---------------------------
//RawSerial pc(USBTX, USBRX,115200);
RawSerial serial1(PB_6,PB_7,115200); // P : 41 et 42
RawSerial serial2(PA_2,PA_3,115200); // P : 43 et 47
RawSerial serial3(PA_2,PA_3,115200); // P : 44 et 48
RawSerial serial4(PA_2,PA_3,115200); // P : 45
RawSerial serial5(PA_2,PA_3,115200); // P : 46
//----------------------------variables de reception----------------------------
uint8_t rx[300];
uint8_t rx2[256];
unsigned char size_reponse=100;
unsigned char recevoir = 0;
unsigned char i2 = 0;
unsigned char flag_serial1_receive2 = 0;
//--------------------variables et fonction de verification---------------------
#define tolerance_en_position 16 //1 degre=(1002-21)/320=3.066position
#define tolerance_en_position_negatif -16
#define B_tolerance_en_position 16 //1 degre=(1002-21)/320=3.066position
#define B_tolerance_en_position_negatif -16
#define V_b 45 //temps d'attente de bras
#define V_m 45 //temps d'attente de bras
#define V_h 45 //temps d'attente de bras
#define TEMPO_R 16 //temps d'attente de reception
#define PWM_recl 0.6
#define temps_servo_G 65 //temps d'attente des servos sauf 2 bras
#define new_tempoX 45 //temps d'attente de correction double
int16_t pos_position = 0, get_pos = 0, pos_ID = 0;
uint8_t pos_led = 0, Status = 0,iID = 0;
uint8_t nombre_servo = 0;
uint8_t pos_time = 0;
uint16_t position_servo_mul[20];
uint8_t data_servo_mul[40];
uint8_t flag_correction = 0;
float new_tempo=0;
float tab_tempo[20];
uint16_t position_servo_mul_different[20];
uint8_t data_servo_mul_different[60];
int8_t my_Tor = 0;
int8_t Tension_inter = 0;
double Tension = 0;
uint8_t coeffient_time = 1;
uint8_t veri = 0;
typedef enum {pos,vitesse,pos_mul_complex,pos_mul_complex_different} type_etat ;
unsigned char serial_numero = 0;
static type_etat etat=pos;
int nb_erreur_pas_de_couple = 0;
int nb_erreur_pos = 0;
//---------------------fonction d'interruption de reception de serial1---------------------
/*
*Ici on crée une interruption afin de rendre prioritaire la réception de données
*!!! Pour utiliser les fonctions utilisant les interruptions, il faut 'activer' ces dernières
*!!!avec la fonction servo_interrupt_en();
*/
unsigned char flag_perdu_info_serial1 = 0, indicateur_serial1 = 0, Size_trame_serial1 = 0, old_valueserial1 = 0;
unsigned char char_receive_pc[100];
unsigned char char_receive_serial1[100];
unsigned char valueserial1=0;
unsigned char valuepc=0,flag_seconde=0,flag_pc_receive=0,flag_serial1_receive=0;
int pospos;
//
//La fonction receive_serial1() est appelée par la fonction d'interruption
//elle appelle la fonction automate_serial() et range les données reçues dans un tableau
//
void receive_serial1()
{
char_receive_serial1[valueserial1]=serial1.getc();
automate_serial1();
}
//
//fonction d'interruption
// elle se déclenche dès que des données se trouvent sur le port de réception
// elle appelle alors immédiatement la fonction receive_serial1();
//
void Interrupt1_en(void)
{
serial1.attach(&receive_serial1,Serial::RxIrq);
}
bool verification()
{
uint8_t i = 0;
switch(etat) {
case pos:
//------------------------Status--------------------
Status = getStatus(pos_ID,serial_numero);
wait_ms(3);
////pc.printf("status = %d",Status);
switch(Status) {
case 0:
break;
case 2: //Exceed allowed POT limit
//pc.printf("ERR-Depasse la limite de position\n");
//clean_ERR(pos_ID);
//wait_ms(500);
clear(pos_ID,serial_numero);
//positionControl(pos_ID, 1000, 3, GLED_ON);
wait_ms(3);
Status = getStatus(pos_ID,serial_numero);
wait_ms(3);
////pc.printf("status = %d",Status);
break;
}
//------------------Torque et position------------------------------
my_Tor = Get_Torque(pos_ID,serial_numero);
wait_ms(5);
////pc.printf("my_Tor = %x\n",my_Tor);
while(my_Tor != 0x60) {
setTorque(pos_ID,TORQUE_ON,serial_numero);
my_Tor = Get_Torque(pos_ID,serial_numero);
wait_ms(5);
}
Tension_inter = Get_Tension_actuelle(pos_ID,serial_numero);
Tension = Tension_inter*0.074;
if(Tension <=6.60) {
coeffient_time = 6;
} else if(Tension <= 6.90) {
coeffient_time = 4;
} else if(Tension <= 7.10) {
coeffient_time = 2;
} else if(Tension > 7.10) {
coeffient_time = 1;
}
get_pos = getPos(pos_ID,serial_numero);
//pc.printf("P4=%d ",get_pos);
if(((get_pos - pos_position)>tolerance_en_position)||((get_pos - pos_position)<tolerance_en_position_negatif)) {
if((get_pos - pos_position)>tolerance_en_position) {
new_tempo=(get_pos - pos_position)*0.084*coeffient_time + 1;
if (new_tempo > 254) new_tempo = 254;
} else if((get_pos - pos_position)<tolerance_en_position_negatif) {
new_tempo=(get_pos - pos_position)*0.084*coeffient_time +1;
if (new_tempo > 254) new_tempo = 254;
}
positionControl(pos_ID, pos_position, new_tempo, pos_led,serial_numero);
//pc.printf("Correction!\n");
}
break;
case pos_mul_complex:
//---------------------------Status---------------------------
for(i=0; i<nombre_servo; i++)
{
Status = getStatus(data_servo_mul[1+2*i],serial_numero);
//pc.printf("status = %d",Status);
switch(Status) {
case 0:
break;
case 2: //Exceed allowed POT limit
////pc.printf("ERR-Depasse la limite de position\n");
//clean_ERR(id);
//wait_ms(500);
clear(data_servo_mul[1+2*i],serial_numero);
//positionControl(id, 1000, 3, GLED_ON);
//wait_ms(3);
//Status = getStatus(data_servo_mul[1+2*i]);
//wait_ms(3);
////pc.printf("status = %d",Status);
break;
}
}
//----------------------Torque et position--------------------------
for(i=0; i<nombre_servo; i++)
{
my_Tor = Get_Torque(data_servo_mul[1+2*i],serial_numero);
//Time_out.reset();
//Time_out.start();
while((my_Tor != 0x60))//&&(Time_out.read_ms()<100) )
{
setTorque(data_servo_mul[1+2*i],TORQUE_ON,serial_numero);
my_Tor = Get_Torque(data_servo_mul[1+2*i],serial_numero);
////pc.printf(" SET_TORQUE ");
Status = getStatus(data_servo_mul[1+2*i],serial_numero);
clear(data_servo_mul[1+2*i],serial_numero);
Status = getStatus(data_servo_mul[1+2*i],serial_numero);
}
//Time_out.stop();
}
veri = 0;
//Time_out.reset();
//Time_out.start();
while((veri < nombre_servo))//&&(Time_out.read_ms()<100))
{
for(i=0; i<nombre_servo; i++)
{
my_Tor = Get_Torque(data_servo_mul[1+2*i],serial_numero);
//Time_out.reset();
//Time_out.start();
while((my_Tor != 0x60))//&&(Time_out.read_ms()<100))
{
setTorque(data_servo_mul[1+2*i],TORQUE_ON,serial_numero);
my_Tor = Get_Torque(data_servo_mul[1+2*i],serial_numero);
////pc.printf(" SET_TORQUE ");
Status = getStatus(data_servo_mul[1+2*i],serial_numero);
clear(data_servo_mul[1+2*i],serial_numero);
Status = getStatus(data_servo_mul[1+2*i],serial_numero);
}
//Time_out.stop();
}
for(i=0; i<nombre_servo; i++)
{
Tension_inter = Get_Tension_actuelle(data_servo_mul[1+2*i],serial_numero);
Tension = Tension_inter*0.074;
if(Tension <=6.60) {
coeffient_time = 6;
} else if(Tension <= 6.90) {
coeffient_time = 4;
} else if(Tension <= 7.10) {
coeffient_time = 2;
} else if(Tension > 7.10) {
coeffient_time = 1;
}
get_pos = getPos(data_servo_mul[1+2*i],serial_numero);
//pc.printf("PosiM=%d ",get_pos);
if((get_pos - position_servo_mul[i])>tolerance_en_position)
{
tab_tempo[i]=(get_pos - position_servo_mul[i])*0.084*coeffient_time+1; //MinTempo pour 1 position:((320/60)*0.17)/(1000-20)=0.94ms MinPlayTime pour 1 position:0.94ms/11.2ms=0.084
if (tab_tempo[i] > 254) tab_tempo[i] = 254;
flag_correction = 1;
}
else if((get_pos - position_servo_mul[i])<tolerance_en_position_negatif)
{
tab_tempo[i]=(position_servo_mul[i] - get_pos)*0.084*coeffient_time+1;
if (tab_tempo[i] > 254) tab_tempo[i] = 254;
flag_correction = 1;
}
}
if(flag_correction == 1)
{
new_tempo = 0;
for(i=0; i<nombre_servo; i++)
{
if(tab_tempo[i]>new_tempo)
{
new_tempo = tab_tempo[i];
}
}
flag_correction = 0;
positionControl_Mul_ensemble_complex(nombre_servo,new_tempo,data_servo_mul, position_servo_mul,serial_numero);
//pc.printf("Correction!\n");
}
veri=0;
for(i=0; i<nombre_servo; i++)
{
get_pos = getPos(data_servo_mul[1+2*i],serial_numero);
//pc.printf("PosiM=%d ",get_pos);
if((get_pos - position_servo_mul[i])>tolerance_en_position)
{
tab_tempo[i]=(get_pos - position_servo_mul[i])*0.084*coeffient_time+1; //MinTempo pour 1 position:((320/60)*0.17)/(1000-20)=0.94ms MinPlayTime pour 1 position:0.94ms/11.2ms=0.084
if (tab_tempo[i] > 254) tab_tempo[i] = 254;
flag_correction = 1;
}
else if((get_pos - position_servo_mul[i])<tolerance_en_position_negatif)
{
tab_tempo[i]=(position_servo_mul[i] - get_pos)*0.084*coeffient_time+1;
if (tab_tempo[i] > 254) tab_tempo[i] = 254;
flag_correction = 1;
}
else { //if(((get_pos - position_servo_mul[i])<tolerance_en_position)&&((get_pos - position_servo_mul[i])>tolerance_en_position_negatif))
veri++;
}
}
}
//Time_out.stop();
break;
case pos_mul_complex_different:
//---------------------------Status---------------------------
for(i=0; i<nombre_servo; i++) {
Status = getStatus(data_servo_mul_different[1+3*i],serial_numero);
////pc.printf("status = %d",Status);
switch(Status) {
case 0:
break;
case 2: //Exceed allowed POT limit
////pc.printf("ERR-Depasse la limite de position\n");
//clean_ERR(id);
//wait_ms(500);
clear(data_servo_mul_different[1+3*i],serial_numero);
//positionControl(id, 1000, 3, GLED_ON);
//wait_ms(3);
//Status = getStatus(data_servo_mul_different[1+2*i]);
//wait_ms(3);
////pc.printf("status = %d",Status);
break;
}
}
//-------------------Torque et position-----------------------------
for(i=0; i<nombre_servo; i++) {
my_Tor = Get_Torque(data_servo_mul_different[1+3*i],serial_numero);
while(my_Tor != 0x60) {
setTorque(data_servo_mul_different[1+3*i],TORQUE_ON,serial_numero);
my_Tor = Get_Torque(data_servo_mul_different[1+3*i],serial_numero);
//wait_ms(5);
////pc.printf(" SET_TORQUE ");
}
}
for(i=0; i<nombre_servo; i++) {
Tension_inter = Get_Tension_actuelle(data_servo_mul_different[1+3*i],serial_numero);
Tension = Tension_inter*0.074;
if(Tension <=6.60) {
coeffient_time = 6;
} else if(Tension <= 6.90) {
coeffient_time = 4;
} else if(Tension <= 7.10) {
coeffient_time = 2;
} else if(Tension > 7.10) {
coeffient_time = 1;
}
get_pos = getPos(data_servo_mul_different[1+3*i],serial_numero);
//pc.printf("PosiM=%d ",get_pos);
if((get_pos - position_servo_mul_different[i])>tolerance_en_position) {
tab_tempo[i]=(get_pos - position_servo_mul_different[i])*0.084*coeffient_time+1; //MinTempo pour 1 position:((320/60)*0.17)/(1000-20)=0.94ms MinPlayTime pour 1 position:0.94ms/11.2ms=0.084
if (tab_tempo[i] > 254) tab_tempo[i] = 254;
data_servo_mul_different[2+3*i] = tab_tempo[i];
flag_correction = 1;
} else if((get_pos - position_servo_mul_different[i])<tolerance_en_position_negatif) {
tab_tempo[i]=(position_servo_mul_different[i] - get_pos)*0.084*coeffient_time+1;
if (tab_tempo[i] > 254) tab_tempo[i] = 254;
data_servo_mul_different[2+3*i] = tab_tempo[i];
flag_correction = 1;
}
}
if(flag_correction == 1) {
flag_correction = 0;
positionControl_Mul_ensemble_different_complex(nombre_servo,data_servo_mul_different, position_servo_mul_different,serial_numero);
//pc.printf("Correction!\n");
}
break;
}
return true;
}
//
//La fonction verification_3_bras() sert à vérifier les bras utilisés après un mouvement groupé
//Elle change les numéros de sérial et des cerveaux moteurs
//
void verification_3_bras(uint8_t sens_avant)
{
uint8_t i=0, idata=0;
uint8_t servos_bras_avant[6] = {RLED_ON, 1, GLED_ON, 2, BLED_ON, 3};
uint8_t servos_bras_arriere[6] = {RLED_ON, 4, GLED_ON, 5, BLED_ON, 6};
if(sens_avant==1)
{
for(idata=0;idata<6;idata++)
{
data_servo_mul[idata] = servos_bras_avant[idata];
}
}
else if(sens_avant==0)
{
for(idata=0;idata<6;idata++)
{
data_servo_mul[idata] = servos_bras_arriere[idata];
}
}
for(i=0; i<3; i++)
{
serial_numero=i+1;
verification();
}
}
//
//La fonction automate_serial1() sert à vérifier la bonne réception des données
//elle est automatiquement appelée par la fonction receive_serial1()
//
void automate_serial1()
{
typedef enum {Attente,FF,Size,Data} type_etat1;
static type_etat1 etat1=Attente;
///////pc.printf("coucou");
//////pc.printf("%d\r\n", char_receive_serial1[valueserial1]);
switch (etat1) {
// état Attente
//on attend la réception des données
//si on reçois l'octet 0xFF, il s'agit d'un début de trame
//on passe à l'état suivant
//
case Attente:
if(char_receive_serial1[0] == 0xFF) {
etat1 = FF;
valueserial1 = 1;
}
break;
// état FF
//on attend le second octet 0xFF pour confirmer qu'il s'agit d'une trame
//si on reçoit l'octet 0xFF, il s'agit bien d'une trame Herkulex
//on passe à l'état suivant
//Sinon on retourne à l'état précédent
//
case FF:
if(char_receive_serial1[1] == 0xFF) {
etat1 = Size;
valueserial1 = 2;
} else {
etat1 = Attente;
valueserial1 = 0;
flag_perdu_info_serial1 = 1; //flag_perdu_info_serial1
}
break;
// état size
//On vérifie si l'octet size est supérieur à la taille minimale d'une trame Herkulex,
//Si oui on passe à l'état suivant
//Si non on passe à l'état attente et flag_perdu_info_serial1 passe à 1 pour signaler la perte d'information
case Size:
if(char_receive_serial1[2] < 7) {
etat1 = Attente;
valueserial1 = 0;
flag_perdu_info_serial1 = 1; //flag_perdu_info_serial1
} else {
etat1 = Data;
old_valueserial1 = 2;
valueserial1 = 3;
}
Size_trame_serial1 = char_receive_serial1[2];
break;
//état data
//on verifie que la taille de la trame reçue correspond à celle indiquée dans l'octet 'size'
//si oui
//flag_serial1_receive passe à 1 pour indiquer que la trame à bien été transmise
case Data:
if((valueserial1-2)==(Size_trame_serial1-3)) {
flag_serial1_receive = 1;
etat1 = Attente;
valueserial1 = 0;
} else {
valueserial1++;
}
break;
default:
break;
}
}
//---------------------fonction d'interruption de reception de serial2---------------------
//même principe que la fonction d'interrutpion de serial1
unsigned char flag_perdu_info_serial2 = 0, indicateur_serial2 = 0, Size_trame_serial2 = 0, old_valueserial2 = 0;
unsigned char char_receive_serial2[100];
unsigned char valueserial2=0;
unsigned char flag_serial2_receive=0;
void receive_serial2()
{
char_receive_serial2[valueserial2]=serial2.getc();
automate_serial2();
}
void Interrupt2_en(void)
{
serial2.attach(&receive_serial2,Serial::RxIrq);
}
void automate_serial2()
{
typedef enum {Attente,FF,Size,Data} type_etat2;
static type_etat2 etat2=Attente;
//////////pc.printf("coucou");
//////pc.printf("%d\r\n", char_receive_serial2[valueserial2]);
switch (etat2) {
case Attente:
if(char_receive_serial2[0] == 0xFF) {
etat2 = FF;
valueserial2 = 1;
}
break;
case FF:
if(char_receive_serial2[1] == 0xFF) {
etat2 = Size;
valueserial2 = 2;
} else {
etat2 = Attente;
valueserial2 = 0;
flag_perdu_info_serial2 = 1; //flag_perdu_info_serial1
}
break;
case Size:
if(char_receive_serial2[2] < 7) {
etat2 = Attente;
valueserial2 = 0;
flag_perdu_info_serial2 = 1; //flag_perdu_info_serial1
} else {
etat2 = Data;
old_valueserial2 = 2;
valueserial2 = 3;
}
Size_trame_serial2 = char_receive_serial2[2];
break;
case Data:
if((valueserial2-2)==(Size_trame_serial2-3)) {
flag_serial2_receive = 1;
etat2 = Attente;
valueserial2 = 0;
} else {
valueserial2++;
}
break;
default:
break;
}
}
//---------------------fonction d'interruption de reception de serial3---------------------
//même principe que la fonction d'interrutpion de serial1
unsigned char flag_perdu_info_serial3 = 0, indicateur_serial3 = 0, Size_trame_serial3 = 0, old_valueserial3 = 0;
unsigned char char_receive_serial3[100];
unsigned char valueserial3=0;
unsigned char flag_serial3_receive=0;
void receive_serial3()
{
char_receive_serial3[valueserial3]=serial3.getc();
automate_serial3();
}
void Interrupt3_en(void)
{
serial3.attach(&receive_serial3,Serial::RxIrq);
}
void automate_serial3()
{
typedef enum {Attente,FF,Size,Data} type_etat3;
static type_etat3 etat3=Attente;
//////////pc.printf("coucou");
//////pc.printf("%d\r\n", char_receive_serial3[valueserial3]);
switch (etat3) {
case Attente:
if(char_receive_serial3[0] == 0xFF) {
etat3 = FF;
valueserial3 = 1;
}
break;
case FF:
if(char_receive_serial3[1] == 0xFF) {
etat3 = Size;
valueserial3 = 2;
} else {
etat3 = Attente;
valueserial3 = 0;
flag_perdu_info_serial3 = 1; //flag_perdu_info_serial1
}
break;
case Size:
if(char_receive_serial3[2] < 7) {
etat3 = Attente;
valueserial3 = 0;
flag_perdu_info_serial3 = 1; //flag_perdu_info_serial1
} else {
etat3 = Data;
old_valueserial3 = 2;
valueserial3 = 3;
}
Size_trame_serial3 = char_receive_serial3[2];
break;
case Data:
if((valueserial3-2)==(Size_trame_serial3-3)) {
flag_serial3_receive = 1;
etat3 = Attente;
valueserial3 = 0;
} else {
valueserial3++;
}
break;
default:
break;
}
}
//---------------------fonction d'interruption de reception de serial4---------------------
//même principe que la fonction d'interrutpion de serial1
unsigned char flag_perdu_info_serial4 = 0, indicateur_serial4 = 0, Size_trame_serial4 = 0, old_valueserial4 = 0;
unsigned char char_receive_serial4[100];
unsigned char valueserial4=0;
unsigned char flag_serial4_receive=0;
void receive_serial4()
{
char_receive_serial4[valueserial4]=serial4.getc();
automate_serial4();
}
void Interrupt4_en(void)
{
serial4.attach(&receive_serial4,Serial::RxIrq);
}
void automate_serial4()
{
typedef enum {Attente,FF,Size,Data} type_etat4;
static type_etat4 etat4=Attente;
//////////pc.printf("coucou");
//////pc.printf("%d\r\n", char_receive_serial4[valueserial4]);
switch (etat4) {
case Attente:
if(char_receive_serial4[0] == 0xFF) {
etat4 = FF;
valueserial4 = 1;
}
break;
case FF:
if(char_receive_serial4[1] == 0xFF) {
etat4 = Size;
valueserial4 = 2;
} else {
etat4 = Attente;
valueserial4 = 0;
flag_perdu_info_serial4 = 1; //flag_perdu_info_serial1
}
break;
case Size:
if(char_receive_serial4[2] < 7) {
etat4 = Attente;
valueserial4 = 0;
flag_perdu_info_serial4 = 1; //flag_perdu_info_serial1
} else {
etat4 = Data;
old_valueserial4 = 2;
valueserial4 = 3;
}
Size_trame_serial4 = char_receive_serial4[2];
break;
case Data:
if((valueserial4-2)==(Size_trame_serial4-3)) {
flag_serial4_receive = 1;
etat4 = Attente;
valueserial4 = 0;
} else {
valueserial4++;
}
break;
default:
break;
}
}
//---------------------fonction d'interruption de reception de serial5---------------------
//même principe que la fonction d'interrutpion de serial1
unsigned char flag_perdu_info_serial5 = 0, indicateur_serial5 = 0, Size_trame_serial5 = 0, old_valueserial5 = 0;
unsigned char char_receive_serial5[100];
unsigned char valueserial5=0;
unsigned char flag_serial5_receive=0;
void receive_serial5()
{
char_receive_serial5[valueserial5]=serial5.getc();
automate_serial5();
}
void Interrupt5_en(void)
{
serial5.attach(&receive_serial5,Serial::RxIrq);
}
void automate_serial5()
{
typedef enum {Attente,FF,Size,Data} type_etat5;
static type_etat5 etat5=Attente;
//////////pc.printf("coucou");
//////pc.printf("%d\r\n", char_receive_serial5[valueserial5]);
switch (etat5) {
case Attente:
if(char_receive_serial5[0] == 0xFF) {
etat5 = FF;
valueserial5 = 1;
}
break;
case FF:
if(char_receive_serial5[1] == 0xFF) {
etat5 = Size;
valueserial5 = 2;
} else {
etat5 = Attente;
valueserial5 = 0;
flag_perdu_info_serial5 = 1; //flag_perdu_info_serial1
}
break;
case Size:
if(char_receive_serial5[2] < 7) {
etat5 = Attente;
valueserial5 = 0;
flag_perdu_info_serial5 = 1; //flag_perdu_info_serial1
} else {
etat5 = Data;
old_valueserial5 = 2;
valueserial5 = 3;
}
Size_trame_serial5 = char_receive_serial5[2];
break;
case Data:
if((valueserial5-2)==(Size_trame_serial5-3)) {
flag_serial5_receive = 1;
etat5 = Attente;
valueserial5 = 0;
} else {
valueserial5++;
}
break;
default:
break;
}
}
//----------------xxxxx----fonction de fermture de serial-----------------------
/*void N_Herkulex()
{
if(Sv != NULL)
delete Sv;
if(recevoir==2) {
size_reponse = rx2[recevoir];
}
}*/
//-------------------------fonction de transmission-----------------------------
//
//Permet de transmettre une trame manuellement sur une liaison série choisie
//
//packetSize ==> Taille totale de la trame en octets
// en-têtes (HEADER) et données (data) inclus
//
//data ==> Données ( Ici il d'agit de la trame en entier) à rentrer sous forme de tableau (1 octet par case!)
//
//numero_serial ==> Numéro de la liaison série sur laquelle on
// envoie la trame
void txPacket(uint8_t packetSize, uint8_t* data, uint8_t numero_serial)
/*#ifdef HERKULEX_DEBUG
pc->printf("[TX]");
for(uint8_t i = 0; i < packetSize ; i++)
{
#ifdef HERKULEX_DEBUG
pc->printf("%02X ",data[i]);
#endif
txd->putc(data[i]);
}
#ifdef HERKULEX_DEBUG
pc->printf("\n");
#endif*/
{
serial_numero = numero_serial;
if(numero_serial == 1) { //Envoi sur la liaison série 1
for(uint8_t i = 0; i < packetSize ; i++) { //
while(serial1.writeable() == 0); //On envoie 1 octet toute les 100 us
serial1.putc(data[i]); //
wait_us(100); //
}
} else if(numero_serial == 2) { //Envoi sur la liaison série 2
for(uint8_t i = 0; i < packetSize ; i++) {
while(serial2.writeable() == 0);
serial2.putc(data[i]);
wait_us(100);
}
} else if(numero_serial == 3) { //Envoi sur la liaison série 3
for(uint8_t i = 0; i < packetSize ; i++) {
while(serial3.writeable() == 0);
serial3.putc(data[i]);
wait_us(100);
}
} else if(numero_serial == 4) { //Envoi sur la liaison série 4
for(uint8_t i = 0; i < packetSize ; i++) {
while(serial4.writeable() == 0);
serial4.putc(data[i]);
wait_us(100);
}
} else if(numero_serial == 5) { //Envoi sur la liaison série 5
for(uint8_t i = 0; i < packetSize ; i++) {
while(serial5.writeable() == 0);
serial5.putc(data[i]);
wait_us(100);
}
}
wait_ms(TEMPO_R);
}
//----------------------------fonction de reception-----------------------------
//Permet de recevoir une trame
void rxPacket(uint8_t packetSize, uint8_t* data, uint8_t numero_serial)
//
//packetSize ==> taille de la trame à recevoir
//data ==> Données
//
{
/*#ifdef HERKULEX_DEBUG
pc->printf("[RX]");
#endif
for (uint8_t i=0; i < packetSize; i++)
{
data[i] = rxd->getc();
#ifdef HERKULEX_DEBUG
pc->printf("%02X ",data[i]);
#endif
}
#ifdef HERKULEX_DEBUG
pc->printf("\n");
#endif*/
serial_numero = numero_serial;
if(numero_serial == 1) {
if(flag_serial1_receive) {
for(unsigned char i4=0; i4<Size_trame_serial1; i4++) {
data[i4] = char_receive_serial1[i4];
//////pc.printf("%d ",(int)char_receive_serial1[i4]);
}
flag_serial1_receive=0;
valueserial1=0;
}
} else if(numero_serial == 2) {
if(flag_serial2_receive) {
for(unsigned char i4=0; i4<Size_trame_serial2; i4++) {
data[i4] = char_receive_serial2[i4];
//////pc.printf("%d ",(int)char_receive_serial2[i4]);
}
flag_serial2_receive=0;
valueserial2=0;
}
} else if(numero_serial == 3) {
if(flag_serial3_receive) {
for(unsigned char i4=0; i4<Size_trame_serial3; i4++) {
data[i4] = char_receive_serial3[i4];
//////pc.printf("%d ",(int)char_receive_serial3[i4]);
}
flag_serial3_receive=0;
valueserial3=0;
}
} else if(numero_serial == 4) {
if(flag_serial4_receive) {
for(unsigned char i4=0; i4<Size_trame_serial4; i4++) {
data[i4] = char_receive_serial4[i4];
//////pc.printf("%d ",(int)char_receive_serial4[i4]);
}
flag_serial4_receive=0;
valueserial4=0;
}
} else if(numero_serial == 5) {
if(flag_serial5_receive) {
for(unsigned char i4=0; i4<Size_trame_serial5; i4++) {
data[i4] = char_receive_serial5[i4];
//////pc.printf("%d ",(int)char_receive_serial5[i4]);
}
flag_serial5_receive=0;
valueserial5=0;
}
}
}
//----------------------fonction pour sortir de l'état d'erreur-------------------------
//
//Permet de "sortir" de la mise en erreur d'un servomoteur
//
void clear(uint8_t id, uint8_t numero_serial)
//
// id ==> On entre l'ID du servomoteur que l'on souhaite sortir de l'état d'erreur
// numero serial ==> On entre le numéro de la liaison série sur laquelle se trouve le servomoteur concerné
{
uint8_t txBuf[11];
serial_numero = numero_serial;
txBuf[0] = HEADER; // Packet Header (0xFF)
txBuf[1] = HEADER; // Packet Header (0xFF)
txBuf[2] = MIN_PACKET_SIZE + 4; // Packet Size
txBuf[3] = id; // Servo ID
txBuf[4] = CMD_RAM_WRITE; // Command Ram Write (0x03) *On choisi le CMD pour écrire dans un registre
txBuf[5] = 0; // Checksum1
txBuf[6] = 0; // Checksum2
txBuf[7] = RAM_STATUS_ERROR; // Address *On écrit dans le registre RAM_STATUS_ERROR
txBuf[8] = BYTE2; // Length *
txBuf[9] = 0; // Clear RAM_STATUS_ERROR
txBuf[10]= 0; // Clear RAM_STATUS_DETAIL
// Checksum1 = (PacketSize ^ pID ^ CMD ^ Data[0] ^ Data[1] ^ ... ^ Data[n]) & 0xFE
// Checksum2 = (~Checksum1)&0xFE
txBuf[5] = (txBuf[2]^txBuf[3]^txBuf[4]^txBuf[7]^txBuf[8]^txBuf[9]^txBuf[10]) & 0xFE; //calcul de checksum1
txBuf[6] = (~txBuf[5])&0xFE; //calcul de checksum2
// send packet (mbed -> herkulex)
if(numero_serial == 1) {
for(uint8_t i = 0; i < 11 ; i++) {
while(serial1.writeable() == 0);
serial1.putc(txBuf[i]);
wait_us(100);
}
} else if(numero_serial == 2) {
for(uint8_t i = 0; i < 11 ; i++) {
while(serial2.writeable() == 0);
serial2.putc(txBuf[i]);
wait_us(100);
}
} else if(numero_serial == 3) {
for(uint8_t i = 0; i < 11 ; i++) {
while(serial3.writeable() == 0);
serial3.putc(txBuf[i]);
wait_us(100);
}
} else if(numero_serial == 4) {
for(uint8_t i = 0; i < 11 ; i++) {
while(serial4.writeable() == 0);
serial4.putc(txBuf[i]);
wait_us(100);
}
} else if(numero_serial == 5) {
for(uint8_t i = 0; i < 11 ; i++) {
while(serial5.writeable() == 0);
serial5.putc(txBuf[i]);
wait_us(100);
}
}
wait_ms(TEMPO_R);
}
//----------------fonction de mise à jour du couple du servo---------------------
void setTorque(uint8_t id, uint8_t cmdTorque, uint8_t numero_serial)
// Permet de modifier l'état du couple d'un servo------------
// id ==> ID du servomoteur
//cmdTorque ==> état souhaité pour le couple
//numero_serial ==> Numéro de la liaison série sur laquelle se trouve le servo
// valeurs posssibles pour cmdTorque
// 0x40 Break On Opérations commandes impossibles
// 0x60 Torque On Fontionnement normal
// 0x00 Torque Free Opérations commandes impossibles + possibilité de déplacer le servo manuellement
{
uint8_t txBuf[10];
serial_numero = numero_serial;
txBuf[0] = HEADER; // Packet Header (0xFF)
txBuf[1] = HEADER; // Packet Header (0xFF)
txBuf[2] = MIN_PACKET_SIZE + 3; // Packet Size
txBuf[3] = id; // Servo ID
txBuf[4] = CMD_RAM_WRITE; // Command Ram Write (0x03)
txBuf[5] = 0; // Checksum1
txBuf[6] = 0; // Checksum2
txBuf[7] = RAM_TORQUE_CONTROL; // Address
txBuf[8] = BYTE1; // Length
txBuf[9] = cmdTorque; // Torque ON
// Checksum1 = (PacketSize ^ pID ^ CMD ^ Data[0] ^ Data[1] ^ ... ^ Data[n]) & 0xFE
// Checksum2 = (~Checksum1)&0xFE
txBuf[5] = (txBuf[2]^txBuf[3]^txBuf[4]^txBuf[7]^txBuf[8]^txBuf[9]) & 0xFE;
txBuf[6] = (~txBuf[5])&0xFE;
// send packet (mbed -> herkulex)
if(numero_serial == 1) {
for(uint8_t i = 0; i < 10 ; i++) {
while(serial1.writeable() == 0);
serial1.putc(txBuf[i]);
wait_us(100);
}
} else if(numero_serial == 2) {
for(uint8_t i = 0; i < 10 ; i++) {
while(serial2.writeable() == 0);
serial2.putc(txBuf[i]);
wait_us(100);
}
} else if(numero_serial == 3) {
for(uint8_t i = 0; i < 10 ; i++) {
while(serial3.writeable() == 0);
serial3.putc(txBuf[i]);
wait_us(100);
}
} else if(numero_serial == 4) {
for(uint8_t i = 0; i < 10 ; i++) {
while(serial4.writeable() == 0);
serial4.putc(txBuf[i]);
wait_us(100);
}
} else if(numero_serial == 5) {
for(uint8_t i = 0; i < 10 ; i++) {
while(serial5.writeable() == 0);
serial5.putc(txBuf[i]);
wait_us(100);
}
}
wait_ms(TEMPO_R);
}
//-------------fonction de contrôle de position pour un seul servo--------------
//Permet de controler un servomoteur en position
void positionControl(uint8_t id, uint16_t position, uint8_t playtime, uint8_t setLED, uint8_t numero_serial)
//
//id ==> id du servo à déplacer
//position ==> position à atteindre
//playtime ==> temps à mettre pour effectuer le déplacement
//setLED ==> LED à allumer
//numero-serial ==> numéro de la liaison série
{
float tempo=0;
serial_numero = numero_serial;
//if (position > 1023) return; //1002-21
if (playtime > 254) playtime = 254; //return; //1-254 == 11.2ms-2.844sec.
tempo=playtime*0.012;
pos_ID = id;
uint8_t txBuf[12];
etat = pos;
pos_position = position;
pos_time = playtime;
pos_led = setLED;
txBuf[0] = HEADER; // Packet Header (0xFF)
txBuf[1] = HEADER; // Packet Header (0xFF)
txBuf[2] = MIN_PACKET_SIZE + 5; // Packet Size
//txBuf[3] = MAX_PID;
txBuf[3] = id; // pID is total number of servos in the network (0 ~ 253)
txBuf[4] = CMD_S_JOG; // Command S JOG (0x06)
txBuf[5] = 0; // Checksum1
txBuf[6] = 0; // Checksum2
txBuf[7] = playtime; // Playtime
txBuf[8] = position & 0x00FF; // Position (LSB, Least Significant Bit)
txBuf[9] =(position & 0xFF00) >> 8; // position (MSB, Most Significanct Bit)
txBuf[10] = POS_MODE | setLED; // Pos Mode and LED on/off
txBuf[11] = id; // Servo ID
// Checksum1 = (PacketSize ^ pID ^ CMD ^ Data[0] ^ Data[1] ^ ... ^ Data[n]) & 0xFE
// Checksum2 = (~Checksum1)&0xFE
txBuf[5] = (txBuf[2]^txBuf[3]^txBuf[4]^txBuf[7]^txBuf[8]^txBuf[9]^txBuf[10]^txBuf[11]) & 0xFE;
txBuf[6] = (~txBuf[5])&0xFE;
// send packet (mbed -> herkulex)
//txPacket(12, txBuf);
if(numero_serial == 1) {
for(uint8_t i = 0; i < 12 ; i++) {
while(serial1.writeable() == 0);
serial1.putc(txBuf[i]);
//pc.printf("%d/",txBuf[i]);
wait_us(100);
}
} else if(numero_serial == 2) {
for(uint8_t i = 0; i < 12 ; i++) {
while(serial2.writeable() == 0);
serial2.putc(txBuf[i]);
wait_us(100);
}
} else if(numero_serial == 3) {
for(uint8_t i = 0; i < 12 ; i++) {
while(serial3.writeable() == 0);
serial3.putc(txBuf[i]);
wait_us(100);
}
} else if(numero_serial == 4) {
for(uint8_t i = 0; i < 12 ; i++) {
while(serial4.writeable() == 0);
serial4.putc(txBuf[i]);
wait_us(100);
}
} else if(numero_serial == 5) {
for(uint8_t i = 0; i < 12 ; i++) {
while(serial5.writeable() == 0);
serial5.putc(txBuf[i]);
wait_us(100);
}
}
wait(tempo);
wait_ms(TEMPO_R);
}
//-------------fonction de controle de vitesse pour un seul servo---------------
void velocityControl(uint8_t id, int16_t speed, uint8_t setLED, uint8_t numero_serial)
//
//id ==> id du servo à déplacer
//speed ==> vitesse (sans dec)
//setLED ==> LED à allumer
//numero_serial ==> numéro de la liaison série
//
{
serial_numero = numero_serial;
if (speed > 1023 || speed < -1023) return;
uint8_t txBuf[12];
txBuf[0] = HEADER; // Packet Header (0xFF)
txBuf[1] = HEADER; // Packet Header (0xFF)
txBuf[2] = MIN_PACKET_SIZE + 5; // Packet Size
txBuf[3] = id; // pID is total number of servos in the network (0 ~ 253)
txBuf[4] = CMD_S_JOG; // Command S JOG (0x06)
txBuf[5] = 0; // Checksum1
txBuf[6] = 0; // Checksum2
txBuf[7] = 0; // Playtime, unmeaningful in turn mode
if (speed >= 0) { //On gère la vitesse positive
txBuf[8] = speed & 0x00FF; // Speed (LSB, Least Significant Bit)
txBuf[9] =(speed & 0xFF00) >> 8; // Speed (MSB, Most Significanct Bit)
} else if(speed < 0) { //On gère la vitesse négative (voir pg.48 de la documentation herkulex)
speed= abs(speed);
txBuf[8] = speed & 0x00FF; // Speed (LSB, Least Significant Bit)
txBuf[9] =((speed|0x4000) & 0xFF00) >> 8; // Speed (MSB, Most Significanct Bit)
}
txBuf[10] = TURN_MODE | setLED; // Turn Mode and LED on/off
txBuf[11] = id; // Servo ID
// Checksum1 = (PacketSize ^ pID ^ CMD ^ Data[0] ^ Data[1] ^ ... ^ Data[n]) & 0xFE
// Checksum2 = (~Checksum1)&0xFE
txBuf[5] = (txBuf[2]^txBuf[3]^txBuf[4]^txBuf[7]^txBuf[8]^txBuf[9]^txBuf[10]^txBuf[11]) & 0xFE;
txBuf[6] = (~txBuf[5])&0xFE;
// send packet (mbed -> herkulex)
if(numero_serial == 1) {
txPacket(12, txBuf,1);
} else if(numero_serial == 2) {
txPacket(12, txBuf,2);
} else if(numero_serial == 3) {
txPacket(12, txBuf,3);
} else if(numero_serial == 4) {
txPacket(12, txBuf,4);
} else if(numero_serial == 5) {
txPacket(12, txBuf,5);
}
wait_ms(TEMPO_R);
}
//--------------------Compteur de tour------------------------------------------------------------------------
//c'est un compteur de tour (CQFD)
void compteTour(int ID,int16_t speed,uint8_t tour, uint16_t position,uint8_t setLED,uint8_t serial)
//
//id ==> id du servo à déplacer
//speed ==> vitesse
//tour ==> nombre de tour à effectuer
//position ==> position finale
//setLED ==> LED à allumer
//numero_serial ==> numéro de la liaison série
//
//
{
int etat =0;
int flagTour=0;
int flagDernierTour = 0;
int end = 0;
int posAct, posCible, pos;
servo_interrupt_en();
clear(ID,serial);
setTorque(ID, TORQUE_ON,serial);
posCible=getPos(ID,serial);//position;
//pc.printf("\nPos depart :%d",posCible);
velocityControl(ID,speed,setLED,serial);
wait_ms(100);
if(tour == 0){
etat = 2;
tour = 1;
}
if(speed > 0) {
while(end != 1) {
switch (etat) {
case 0 :
pos = getPos(ID,serial);
posAct = pos - posCible;
if(posAct<0){
//pc.printf("\n0 pos :%d",pos);
clear(ID,serial);
setTorque(ID, TORQUE_ON,serial);
etat=1;
}
break;
case 1 :
pos = getPos(ID,serial);
velocityControl(ID,speed,RLED_ON,serial);
posAct = posCible - pos;
if (posAct < 0 ){
//pc.printf("\n1 pos :%d",pos);
etat = 2;
}
break;
case 2 :
clear(ID,serial);
setTorque(ID, TORQUE_ON,serial);
if (flagTour == tour-1) {
if (getPos(ID,serial) > position && !flagDernierTour){
//pc.printf("\nTour sup");
// flagTour++;
flagDernierTour =1;
etat =0;
posCible = position;
}else{
//pc.printf("\ngoto pos finale");
velocityControl(ID,0,setLED,serial);
positionControl(ID,position,1,setLED,serial);
end = 1;
}
}
else {
flagTour=flagTour+1;
//pc.printf("\ntours execute : %d",flagTour);
etat = 0;
}
break;
}
}
} else if(speed < 0) {
while(end != 1) {
switch (etat) {
case 0 :
pos = getPos(ID,serial);
posAct = pos - posCible;
if(posAct>0){
//pc.printf("\n0 pos :%d",pos);
clear(ID,serial);
setTorque(ID, TORQUE_ON,serial);
etat=1;
}
break;
case 1 :
pos = getPos(ID,serial);
velocityControl(ID,speed,RLED_ON,serial);
posAct = posCible - pos;
if (posAct > 0 ){
//pc.printf("\n1 pos :%d",pos);
etat = 2;
}
break;
case 2 :
clear(ID,serial);
setTorque(ID, TORQUE_ON,serial);
if (flagTour == tour-1) {
if (getPos(ID,serial) < position && !flagDernierTour){
//pc.printf("\nTour sup");
// flagTour++;
flagDernierTour =1;
etat =0;
posCible = position;
}else{
//pc.printf("\ngoto pos finale");
velocityControl(ID,0,setLED,serial);
positionControl(ID,position,1,setLED,serial);
end = 1;
}
}
else {
flagTour=flagTour+1;
//pc.printf("\ntours execute : %d",flagTour);
etat = 0;
}
break;
}
}
}
}
/*
{
int etat =0;
int flagTour=0;
int end = 0;
int posAct, posCible;
servo_interrupt_en();
clear(ID,serial);
setTorque(ID, TORQUE_ON,serial);
posCible=position;
velocityControl(ID,speed,setLED,serial);
wait_ms(100);
if(speed > 0) {
while(end != 1) {
switch (etat) {
case 0 :
posAct = getPos(ID,serial);
posAct = posAct-posCible;
//pc.printf("%d",posAct);
if (posAct < 0) {
clear(ID,serial);
setTorque(ID, TORQUE_ON,serial);
etat=1;
}
break;
case 1 :
velocityControl(ID,speed,RLED_ON,serial);
posAct = getPos(ID,serial);
posAct = posCible-posAct;
if (posAct < 0) etat = 2;
break;
case 2 :
clear(ID,serial);
setTorque(ID, TORQUE_ON,serial);
if (flagTour == tour-1 | tour == 0) {
velocityControl(ID,0,setLED,serial);
positionControl(ID,posCible,1,setLED,serial);
end = 1;
} else {
flagTour=flagTour+1;
etat = 0;
}
break;
}
}
} else if(speed < 0) {
while(end != 1) {
switch (etat) {
case 0 :
posAct = getPos(ID,serial);
posAct = posCible-posAct;
//pc.printf("%d",posAct);
if (posAct < 0) {
clear(ID,serial);
setTorque(ID, TORQUE_ON,serial);
etat=1;
}
break;
case 1 :
velocityControl(ID,speed,RLED_ON,serial);
posAct = getPos(ID,serial);
posAct = posAct-posCible;
if (posAct < 0) etat = 2;
break;
case 2 :
clear(ID,serial);
setTorque(ID, TORQUE_ON,serial);
if (flagTour == tour-1 | tour == 0) {
velocityControl(ID,0,setLED,serial);
positionControl(ID,posCible,1,setLED,serial);
end =1;
} else {
flagTour=flagTour+1;
etat = 0;
}
break;
}
}
}
}*/
//--------------------fonction d'acquisition d'etat d'un servo-----------------------
int8_t getStatus(uint8_t id, uint8_t numero_serial)
//
// renvoi l'état du servomoteur (doc pg 39)
//
//id ==> Id du servo concerné
//numero-serial ==> numéro de la liaison série du servo
//
{
serial_numero = numero_serial;
uint8_t status;
uint8_t txBuf[7];
size_reponse = 9;
txBuf[0] = HEADER; // Packet Header (0xFF)
txBuf[1] = HEADER; // Packet Header (0xFF)
txBuf[2] = MIN_PACKET_SIZE; // Packet Size
txBuf[3] = id; // Servo ID
txBuf[4] = CMD_STAT; // Status Error, Status Detail request
// Check Sum1 and Check Sum2
txBuf[5] = (txBuf[2]^txBuf[3]^txBuf[4]) & 0xFE;
txBuf[6] = (~txBuf[5])&0xFE;
uint8_t rxBuf[9];
if(numero_serial == 1) {
for(uint8_t i = 0; i < 7 ; i++) {
while(serial1.writeable() == 0);
serial1.putc(txBuf[i]);
wait_us(100);
}
wait_ms(TEMPO_R);
if(flag_serial1_receive) {
for(unsigned char i4=0; i4<Size_trame_serial1; i4++) {
rxBuf[i4] = char_receive_serial1[i4];
////////////pc.printf("%d ",(int)char_receive_serial1[i4]);
}
flag_serial1_receive=0;
valueserial1=0;
}
} else if(numero_serial == 2) {
for(uint8_t i = 0; i < 7 ; i++) {
while(serial2.writeable() == 0);
serial2.putc(txBuf[i]);
wait_us(100);
}
wait_ms(TEMPO_R);
if(flag_serial2_receive) {
for(unsigned char i4=0; i4<Size_trame_serial2; i4++) {
rxBuf[i4] = char_receive_serial2[i4];
//////pc.printf("%d ",(int)char_receive_serial2[i4]);
}
flag_serial2_receive=0;
valueserial2=0;
}
} else if(numero_serial == 3) {
for(uint8_t i = 0; i < 7 ; i++) {
while(serial3.writeable() == 0);
serial3.putc(txBuf[i]);
wait_us(100);
}
wait_ms(TEMPO_R);
if(flag_serial3_receive) {
for(unsigned char i4=0; i4<Size_trame_serial3; i4++) {
rxBuf[i4] = char_receive_serial3[i4];
//////pc.printf("%d ",(int)char_receive_serial3[i4]);
}
flag_serial3_receive=0;
valueserial3=0;
}
} else if(numero_serial == 4) {
for(uint8_t i = 0; i < 7 ; i++) {
while(serial4.writeable() == 0);
serial4.putc(txBuf[i]);
wait_us(100);
}
wait_ms(TEMPO_R);
if(flag_serial4_receive) {
for(unsigned char i4=0; i4<Size_trame_serial4; i4++) {
rxBuf[i4] = char_receive_serial4[i4];
//////pc.printf("%d ",(int)char_receive_serial4[i4]);
}
flag_serial4_receive=0;
valueserial4=0;
}
} else if(numero_serial == 5) {
for(uint8_t i = 0; i < 7 ; i++) {
while(serial5.writeable() == 0);
serial5.putc(txBuf[i]);
wait_us(100);
}
wait_ms(TEMPO_R);
if(flag_serial5_receive) {
for(unsigned char i4=0; i4<Size_trame_serial5; i4++) {
rxBuf[i4] = char_receive_serial5[i4];
//////pc.printf("%d ",(int)char_receive_serial5[i4]);
}
flag_serial5_receive=0;
valueserial5=0;
}
}
// Checksum1
uint8_t chksum1 = (rxBuf[2]^rxBuf[3]^rxBuf[4]^rxBuf[7]^rxBuf[8]) & 0xFE;
if (chksum1 != rxBuf[5]) {
if(numero_serial == 1) {
flag_serial1_receive=0;
} else if(numero_serial == 2) {
flag_serial2_receive=0;
} else if(numero_serial == 3) {
flag_serial3_receive=0;
} else if(numero_serial == 4) {
flag_serial4_receive=0;
} else if(numero_serial == 5) {
flag_serial5_receive=0;
}
return -1;
}
// Checksum2
uint8_t chksum2 = (~rxBuf[5]&0xFE);
if (chksum2 != rxBuf[6]) {
if(numero_serial == 1) {
flag_serial1_receive=0;
} else if(numero_serial == 2) {
flag_serial2_receive=0;
} else if(numero_serial == 3) {
flag_serial3_receive=0;
} else if(numero_serial == 4) {
flag_serial4_receive=0;
} else if(numero_serial == 5) {
flag_serial5_receive=0;
}
return -1;
}
status = rxBuf[7]; // Status Error
//status = rxBuf[8]; // Status Detail
return status;
}
//------------------fonction pour lire la position actuelle-----------------------
int16_t getPos(uint8_t id, uint8_t numero_serial)
//
//renvoie la position d'un servo
//
//!!!ne pas oublier d'utiliser servo_interrupt_en();!!!
//
//id ==> id d'un servomoteur
//numero_serial==> numéro de la liaison série du servo
//
{
serial_numero = numero_serial;
uint16_t position = 0;
uint8_t txBuf[9];
size_reponse = 13;
txBuf[0] = HEADER; // Packet Header (0xFF)
txBuf[1] = HEADER; // Packet Header (0xFF)
txBuf[2] = MIN_PACKET_SIZE + 2; // Packet Size
txBuf[3] = id; // Servo ID
txBuf[4] = CMD_RAM_READ; // Command Ram Read
txBuf[5] = 0; // Checksum1
txBuf[6] = 0; // Checksum2
txBuf[7] = RAM_CALIBRATED_POSITION; // Address
txBuf[8] = BYTE2;
// Check Sum1 and Check Sum2
txBuf[5] = (txBuf[2]^txBuf[3]^txBuf[4]^txBuf[7]^txBuf[8]) & 0xFE;
txBuf[6] = (~txBuf[5])&0xFE;
uint8_t rxBuf[13];
if(numero_serial == 1) {
for(uint8_t i = 0; i < 9 ; i++) {
while(serial1.writeable() == 0);
serial1.putc(txBuf[i]);
wait_us(100);
}
wait_ms(TEMPO_R);
if(flag_serial1_receive) {
for(unsigned char i4=0; i4<Size_trame_serial1; i4++) {
rxBuf[i4] = char_receive_serial1[i4];
//pc.printf("%d ",(int)char_receive_serial1[i4]);
}
flag_serial1_receive=0;
valueserial1=0;
}
} else if(numero_serial == 2) {
for(uint8_t i = 0; i < 9 ; i++) {
while(serial2.writeable() == 0);
serial2.putc(txBuf[i]);
wait_us(100);
}
wait_ms(TEMPO_R);
if(flag_serial2_receive) {
for(unsigned char i4=0; i4<Size_trame_serial2; i4++) {
rxBuf[i4] = char_receive_serial2[i4];
//////pc.printf("%d ",(int)char_receive_serial2[i4]);
}
flag_serial2_receive=0;
valueserial2=0;
}
} else if(numero_serial == 3) {
for(uint8_t i = 0; i < 9 ; i++) {
while(serial3.writeable() == 0);
serial3.putc(txBuf[i]);
wait_us(100);
}
wait_ms(TEMPO_R);
if(flag_serial3_receive) {
for(unsigned char i4=0; i4<Size_trame_serial3; i4++) {
rxBuf[i4] = char_receive_serial3[i4];
//////pc.printf("%d ",(int)char_receive_serial3[i4]);
}
flag_serial3_receive=0;
valueserial3=0;
}
} else if(numero_serial == 4) {
for(uint8_t i = 0; i < 9 ; i++) {
while(serial4.writeable() == 0);
serial4.putc(txBuf[i]);
wait_us(100);
}
wait_ms(TEMPO_R);
if(flag_serial4_receive) {
for(unsigned char i4=0; i4<Size_trame_serial4; i4++) {
rxBuf[i4] = char_receive_serial4[i4];
//////pc.printf("%d ",(int)char_receive_serial4[i4]);
}
flag_serial4_receive=0;
valueserial4=0;
}
} else if(numero_serial == 5) {
for(uint8_t i = 0; i < 9 ; i++) {
while(serial5.writeable() == 0);
serial5.putc(txBuf[i]);
wait_us(100);
}
wait_ms(TEMPO_R);
if(flag_serial5_receive) {
for(unsigned char i4=0; i4<Size_trame_serial5; i4++) {
rxBuf[i4] = char_receive_serial5[i4];
//////pc.printf("%d ",(int)char_receive_serial5[i4]);
}
flag_serial5_receive=0;
valueserial5=0;
}
}
// Checksum1
uint8_t chksum1 = (rxBuf[2]^rxBuf[3]^rxBuf[4]^rxBuf[7]^rxBuf[8]^rxBuf[9]^rxBuf[10]^rxBuf[11]^rxBuf[12]) & 0xFE;
if (chksum1 != rxBuf[5]) {
/*#ifdef HERKULEX_DEBUG
pc->printf("Checksum1 fault\n");
#endif*/
if(numero_serial == 1) {
flag_serial1_receive=0;
} else if(numero_serial == 2) {
flag_serial2_receive=0;
} else if(numero_serial == 3) {
flag_serial3_receive=0;
} else if(numero_serial == 4) {
flag_serial4_receive=0;
} else if(numero_serial == 5) {
flag_serial5_receive=0;
}
return -1;
}// Checksum2
uint8_t chksum2 = (~rxBuf[5]&0xFE);
if (chksum2 != rxBuf[6]) {
/* #ifdef HERKULEX_DEBUG
pc->printf("Checksum2 fault\n");
#endif*/
if(numero_serial == 1) {
flag_serial1_receive=0;
} else if(numero_serial == 2) {
flag_serial2_receive=0;
} else if(numero_serial == 3) {
flag_serial3_receive=0;
} else if(numero_serial == 4) {
flag_serial4_receive=0;
} else if(numero_serial == 5) {
flag_serial5_receive=0;
}
return -1;
} position = ((rxBuf[10]&0x03)<<8) | rxBuf[9];
//}
return position;
}
//---------------fonction d'acquis d'etat de couple d'un servo------------------
//Obtenir la valeur du couple d'un servo
int8_t Get_Torque(int8_t id, uint8_t numero_serial)
//
//id ==> id du servomoteur sur la liaison série
//numero_serial ==> numéro de la liaison série sur laquelle se trouve le servomoteur
//
{
serial_numero = numero_serial;
uint8_t txBuf[9];
int8_t Tor = 0;
uint8_t iv=0;
for(iv=0; iv<20; iv++) {
rx2[iv] = 0;
}
txBuf[0] = HEADER; // Packet Header (0xFF)
txBuf[1] = HEADER; // Packet Header (0xFF)
txBuf[2] = MIN_PACKET_SIZE + 2; // Packet Size
txBuf[3] = id; // Servo ID
txBuf[4] = CMD_RAM_READ; // Command Ram Read
txBuf[5] = 0; // Checksum1
txBuf[6] = 0; // Checksum2
txBuf[7] = RAM_TORQUE_CONTROL;
txBuf[8] = BYTE1; // Length
txBuf[5] = (txBuf[2]^txBuf[3]^txBuf[4]^txBuf[7]^txBuf[8]) & 0xFE;//Checksum2
txBuf[6] = (~txBuf[5])&0xFE; // CheckSum2
//pc.printf(" Torque ");
uint8_t rxBuf[12];
if(numero_serial == 1) {
//send packet (mbed -> herkulex)
for(uint8_t i = 0; i < 9 ; i++) {
while(serial1.writeable() == 0);
serial1.putc(txBuf[i]);
wait_us(100);
}
//send packet (mbed -> herkulex)
//uint8_t rxBuf[12];
wait_ms(TEMPO_R);
if(flag_serial1_receive) {
for(unsigned char i4=0; i4<Size_trame_serial1; i4++) {
rxBuf[i4] = char_receive_serial1[i4];
//////pc.printf("%d ",(int)char_receive_serial1[i4]);
}
flag_serial1_receive=0;
valueserial1=0;
}
} else if(numero_serial == 2) {
for(uint8_t i = 0; i < 9 ; i++) {
while(serial2.writeable() == 0);
serial2.putc(txBuf[i]);
wait_us(100);
}
wait_ms(TEMPO_R);
if(flag_serial2_receive) {
for(unsigned char i4=0; i4<Size_trame_serial2; i4++) {
rxBuf[i4] = char_receive_serial2[i4];
//////pc.printf("%d ",(int)char_receive_serial2[i4]);
}
flag_serial2_receive=0;
valueserial2=0;
}
} else if(numero_serial == 3) {
for(uint8_t i = 0; i < 9 ; i++) {
while(serial3.writeable() == 0);
serial3.putc(txBuf[i]);
wait_us(100);
}
wait_ms(TEMPO_R);
if(flag_serial3_receive) {
for(unsigned char i4=0; i4<Size_trame_serial3; i4++) {
rxBuf[i4] = char_receive_serial3[i4];
//////pc.printf("%d ",(int)char_receive_serial3[i4]);
}
flag_serial3_receive=0;
valueserial3=0;
}
} else if(numero_serial == 4) {
for(uint8_t i = 0; i < 9 ; i++) {
while(serial4.writeable() == 0);
serial4.putc(txBuf[i]);
wait_us(100);
}
wait_ms(TEMPO_R);
if(flag_serial4_receive) {
for(unsigned char i4=0; i4<Size_trame_serial4; i4++) {
rxBuf[i4] = char_receive_serial4[i4];
//////pc.printf("%d ",(int)char_receive_serial4[i4]);
}
flag_serial4_receive=0;
valueserial4=0;
}
} else if(numero_serial == 5) {
for(uint8_t i = 0; i < 9 ; i++) {
while(serial5.writeable() == 0);
serial5.putc(txBuf[i]);
wait_us(100);
}
wait_ms(TEMPO_R);
if(flag_serial5_receive) {
for(unsigned char i4=0; i4<Size_trame_serial5; i4++) {
rxBuf[i4] = char_receive_serial5[i4];
//////pc.printf("%d ",(int)char_receive_serial5[i4]);
}
flag_serial5_receive=0;
valueserial5=0;
}
}
uint8_t chksum1 = (rxBuf[2]^rxBuf[3]^rxBuf[4]^rxBuf[7]^rxBuf[8]^rxBuf[9]^rxBuf[10]^rxBuf[11]) & 0xFE;
if (chksum1 != rxBuf[5]) {
/*#ifdef HERKULEX_DEBUG
pc->printf("Checksum1 fault\n");
#endif*/
if(numero_serial == 1) {
flag_serial1_receive=0;
} else if(numero_serial == 2) {
flag_serial2_receive=0;
} else if(numero_serial == 3) {
flag_serial3_receive=0;
} else if(numero_serial == 4) {
flag_serial4_receive=0;
} else if(numero_serial == 5) {
flag_serial5_receive=0;
}
return -1;
}// Checksum2
uint8_t chksum2 = (~rxBuf[5]&0xFE);
if (chksum2 != rxBuf[6]) {
/* #ifdef HERKULEX_DEBUG
pc->printf("Checksum2 fault\n");
#endif*/
if(numero_serial == 1) {
flag_serial1_receive=0;
} else if(numero_serial == 2) {
flag_serial2_receive=0;
} else if(numero_serial == 3) {
flag_serial3_receive=0;
} else if(numero_serial == 4) {
flag_serial4_receive=0;
} else if(numero_serial == 5) {
flag_serial5_receive=0;
}
return -1;
}
Tor = rxBuf[9];
/* #ifdef HERKULEX_DEBUG
pc->printf("position = %04X(%d)\n", position, position);
#endif*/
//}
return Tor;
}
//---------------fonction pour lire le temperature max pour un servo------------
//obtenir la valeur de température maximum tolérée par le servomoteur
int8_t Get_Temperature_MAX(int8_t id, uint8_t numero_serial)
//
//id ==> id du servomoteur sur la liaison série
//numero_serial ==> numéro de la liaison série sur laquelle se trouve le servomoteur
//
{
serial_numero = numero_serial;
uint8_t txBuf[9];
int8_t tempeMAX = 0;
txBuf[0] = HEADER; // Packet Header (0xFF)
txBuf[1] = HEADER; // Packet Header (0xFF)
txBuf[2] = MIN_PACKET_SIZE + 2; // Packet Size
txBuf[3] = id; // Servo ID
txBuf[4] = CMD_RAM_READ; // Command Ram Read
txBuf[5] = 0; // Checksum1
txBuf[6] = 0; // Checksum2
txBuf[7] = RAM_MAX_TEMPERATURE;
txBuf[8] = BYTE1; // Length
// Check Sum1 and Check Sum2
txBuf[5] = (txBuf[2]^txBuf[3]^txBuf[4]^txBuf[7]^txBuf[8]) & 0xFE;
txBuf[6] = (~txBuf[5])&0xFE;
//pc.printf(" tempeMAX ");
uint8_t rxBuf[12];
if(numero_serial == 1) {
//send packet (mbed -> herkulex)
for(uint8_t i = 0; i < 9 ; i++) {
while(serial1.writeable() == 0);
serial1.putc(txBuf[i]);
wait_us(100);
}
//send packet (mbed -> herkulex)
//uint8_t rxBuf[12];
wait_ms(TEMPO_R);
if(flag_serial1_receive) {
for(unsigned char i4=0; i4<Size_trame_serial1; i4++) {
rxBuf[i4] = char_receive_serial1[i4];
//////pc.printf("%d ",(int)char_receive_serial1[i4]);
}
flag_serial1_receive=0;
valueserial1=0;
}
} else if(numero_serial == 2) {
for(uint8_t i = 0; i < 9 ; i++) {
while(serial2.writeable() == 0);
serial2.putc(txBuf[i]);
wait_us(100);
}
wait_ms(TEMPO_R);
if(flag_serial2_receive) {
for(unsigned char i4=0; i4<Size_trame_serial2; i4++) {
rxBuf[i4] = char_receive_serial2[i4];
//////pc.printf("%d ",(int)char_receive_serial2[i4]);
}
flag_serial2_receive=0;
valueserial2=0;
}
} else if(numero_serial == 3) {
for(uint8_t i = 0; i < 9 ; i++) {
while(serial3.writeable() == 0);
serial3.putc(txBuf[i]);
wait_us(100);
}
wait_ms(TEMPO_R);
if(flag_serial3_receive) {
for(unsigned char i4=0; i4<Size_trame_serial3; i4++) {
rxBuf[i4] = char_receive_serial3[i4];
//////pc.printf("%d ",(int)char_receive_serial3[i4]);
}
flag_serial3_receive=0;
valueserial3=0;
}
} else if(numero_serial == 4) {
for(uint8_t i = 0; i < 9 ; i++) {
while(serial4.writeable() == 0);
serial4.putc(txBuf[i]);
wait_us(100);
}
wait_ms(TEMPO_R);
if(flag_serial4_receive) {
for(unsigned char i4=0; i4<Size_trame_serial4; i4++) {
rxBuf[i4] = char_receive_serial4[i4];
//////pc.printf("%d ",(int)char_receive_serial4[i4]);
}
flag_serial4_receive=0;
valueserial4=0;
}
} else if(numero_serial == 5) {
for(uint8_t i = 0; i < 9 ; i++) {
while(serial5.writeable() == 0);
serial5.putc(txBuf[i]);
wait_us(100);
}
wait_ms(TEMPO_R);
if(flag_serial5_receive) {
for(unsigned char i4=0; i4<Size_trame_serial5; i4++) {
rxBuf[i4] = char_receive_serial5[i4];
//////pc.printf("%d ",(int)char_receive_serial5[i4]);
}
flag_serial5_receive=0;
valueserial5=0;
}
}
uint8_t chksum1 = (rxBuf[2]^rxBuf[3]^rxBuf[4]^rxBuf[7]^rxBuf[8]^rxBuf[9]^rxBuf[10]^rxBuf[11]) & 0xFE;
if (chksum1 != rxBuf[5]) {
/*#ifdef HERKULEX_DEBUG
pc->printf("Checksum1 fault\n");
#endif*/
if(numero_serial == 1) {
flag_serial1_receive=0;
} else if(numero_serial == 2) {
flag_serial2_receive=0;
} else if(numero_serial == 3) {
flag_serial3_receive=0;
} else if(numero_serial == 4) {
flag_serial4_receive=0;
} else if(numero_serial == 5) {
flag_serial5_receive=0;
}
return -1;
}// Checksum2
uint8_t chksum2 = (~rxBuf[5]&0xFE);
if (chksum2 != rxBuf[6]) {
/* #ifdef HERKULEX_DEBUG
pc->printf("Checksum2 fault\n");
#endif*/
if(numero_serial == 1) {
flag_serial1_receive=0;
} else if(numero_serial == 2) {
flag_serial2_receive=0;
} else if(numero_serial == 3) {
flag_serial3_receive=0;
} else if(numero_serial == 4) {
flag_serial4_receive=0;
} else if(numero_serial == 5) {
flag_serial5_receive=0;
}
return -1;
}
tempeMAX = rxBuf[9];
/* #ifdef HERKULEX_DEBUG
pc->printf("position = %04X(%d)\n", position, position);
#endif*/
//}
return tempeMAX;
}
//--------fonction de controle de position pour deux servo(same playtime)-------
//permet de déplacer deux servomoteurs sur la même liaison série avec le même temps d'execution
void positionControl_Mul_ensemble(uint8_t id, uint16_t position, uint8_t playtime, uint8_t setLED,uint8_t id2, uint16_t position2, uint8_t setLED2, uint8_t numero_serial)
//
//id
//
{
serial_numero = numero_serial;
float tempo=0;
//if (position > 1023) return; //1002-21
if (playtime > 254) return; //1-254 == 11.2ms-2.844sec.
tempo=playtime*0.012;
uint8_t txBuf[16];
etat = pos;
pos_position = position;
pos_time = playtime;
pos_led = setLED;
txBuf[0] = HEADER; // Packet Header (0xFF)
txBuf[1] = HEADER; // Packet Header (0xFF)
txBuf[2] = MIN_PACKET_SIZE + 9; // Packet Size
//txBuf[3] = MAX_PID; // pID is total number of servos in the network (0 ~ 253)
txBuf[3] = 254; // broadcast ID
txBuf[4] = CMD_S_JOG; // Command S JOG (0x06)
txBuf[5] = 0; // Checksum1
txBuf[6] = 0; // Checksum2
txBuf[7] = playtime; // Playtime
txBuf[8] = position & 0x00FF; // Position (LSB, Least Significant Bit)
txBuf[9] =(position & 0xFF00) >> 8;// position (MSB, Most Significanct Bit)
txBuf[10] = POS_MODE | setLED; // Pos Mode and LED on/off
txBuf[11] = id; // Servo ID
txBuf[12] = position2 & 0x00FF; // Position (LSB, Least Significant Bit)
txBuf[13] =(position2 & 0xFF00) >> 8;// position (MSB, Most Significanct Bit)
txBuf[14] = POS_MODE | setLED2; // Pos Mode and LED on/off
txBuf[15] = id2; // Servo ID
// Checksum1 = (PacketSize ^ pID ^ CMD ^ Data[0] ^ Data[1] ^ ... ^ Data[n]) & 0xFE
// Checksum2 = (~Checksum1)&0xFE
txBuf[5] = (txBuf[2]^txBuf[3]^txBuf[4]^txBuf[7]^txBuf[8]^txBuf[9]^txBuf[10]^txBuf[11]^txBuf[12]^txBuf[13]^txBuf[14]^txBuf[15]) & 0xFE;
txBuf[6] = (~txBuf[5])&0xFE;
// send packet (mbed -> herkulex)
if(numero_serial == 1) {
for(uint8_t i = 0; i < 16 ; i++) {
while(serial1.writeable() == 0);
serial1.putc(txBuf[i]);
wait_us(100);
}
} else if(numero_serial == 2) {
for(uint8_t i = 0; i < 16 ; i++) {
while(serial2.writeable() == 0);
serial2.putc(txBuf[i]);
wait_us(100);
}
} else if(numero_serial == 3) {
for(uint8_t i = 0; i < 16 ; i++) {
while(serial3.writeable() == 0);
serial3.putc(txBuf[i]);
wait_us(100);
}
} else if(numero_serial == 4) {
for(uint8_t i = 0; i < 16 ; i++) {
while(serial4.writeable() == 0);
serial4.putc(txBuf[i]);
wait_us(100);
}
} else if(numero_serial == 5) {
for(uint8_t i = 0; i < 16 ; i++) {
while(serial5.writeable() == 0);
serial5.putc(txBuf[i]);
wait_us(100);
}
}
wait(tempo);
wait_ms(TEMPO_R);
}
//-----fonction de controle de position pour deux servo(different playtime)----- //a changer...
void positionControl_Mul_playtime_different(uint8_t id, uint16_t position, uint8_t playtime, uint8_t setLED,uint8_t id2, uint16_t position2, uint8_t playtime2, uint8_t setLED2, uint8_t numero_serial)
//
//permet de controler deux servomoteurs avec des temps d'execution différents
//
{
serial_numero = numero_serial;
float tempo=0;
//if (position > 1023) return; //1002-21
if (playtime > 254) playtime = 254; //return; //1-254 == 11.2ms-2.844sec.
if(playtime>playtime2) {
tempo=playtime*0.012;
} else if(playtime<playtime2) {
tempo=playtime2*0.012;
}
uint8_t txBuf[17];
etat = pos;
pos_position = position;
pos_time = playtime;
pos_led = setLED;
txBuf[0] = HEADER; // Packet Header (0xFF)
txBuf[1] = HEADER; // Packet Header (0xFF)
txBuf[2] = MIN_PACKET_SIZE + 9; // Packet Size
//txBuf[3] = MAX_PID; // pID is total number of servos in the network (0 ~ 253)
txBuf[3] = 254; // broadcast ID
txBuf[4] = CMD_I_JOG; // Command I JOG
txBuf[5] = 0; // Checksum1
txBuf[6] = 0; // Checksum2
txBuf[7] = position & 0x00FF; // Position (LSB, Least Significant Bit)
txBuf[8] =(position & 0xFF00) >> 8;// position (MSB, Most Significanct Bit)
txBuf[9] = POS_MODE | setLED; // Pos Mode and LED on/off
txBuf[10] = id; // Servo ID
txBuf[11] = playtime; // Playtime
txBuf[12] = position2 & 0x00FF; // Position (LSB, Least Significant Bit)
txBuf[13] =(position2 & 0xFF00) >> 8;// position (MSB, Most Significanct Bit)
txBuf[14] = POS_MODE | setLED2; // Pos Mode and LED on/off
txBuf[15] = id2; // Servo ID
txBuf[16] = playtime2; // Playtime
// Checksum1 = (PacketSize ^ pID ^ CMD ^ Data[0] ^ Data[1] ^ ... ^ Data[n]) & 0xFE
// Checksum2 = (~Checksum1)&0xFE
txBuf[5] = (txBuf[2]^txBuf[3]^txBuf[4]^txBuf[7]^txBuf[8]^txBuf[9]^txBuf[10]^txBuf[11]^txBuf[12]^txBuf[13]^txBuf[14]^txBuf[15]) & 0xFE;
txBuf[6] = (~txBuf[5])&0xFE;
// send packet (mbed -> herkulex)
//txPacket(12, txBuf);
if(numero_serial == 1) {
for(uint8_t i = 0; i < 17 ; i++) {
while(serial1.writeable() == 0);
serial1.putc(txBuf[i]);
wait_us(100);
}
} else if(numero_serial == 2) {
for(uint8_t i = 0; i < 17 ; i++) {
while(serial2.writeable() == 0);
serial2.putc(txBuf[i]);
wait_us(100);
}
} else if(numero_serial == 3) {
for(uint8_t i = 0; i < 17 ; i++) {
while(serial3.writeable() == 0);
serial3.putc(txBuf[i]);
wait_us(100);
}
} else if(numero_serial == 4) {
for(uint8_t i = 0; i < 17 ; i++) {
while(serial4.writeable() == 0);
serial4.putc(txBuf[i]);
wait_us(100);
}
} else if(numero_serial == 5) {
for(uint8_t i = 0; i < 17 ; i++) {
while(serial5.writeable() == 0);
serial5.putc(txBuf[i]);
wait_us(100);
}
}
wait_ms(TEMPO_R);
}
//-----fonction de controle de position pour plusieurs servo(same playtime)-----
void positionControl_Mul_ensemble_complex(uint8_t nb_servo, uint8_t playtime, uint8_t* data, uint16_t* pos, uint8_t numero_serial) // uint16_t position, uint8_t setLED, uint8_t id
//
//Permet de controler tout les servos de la même liaison série avec le même temps d'execution
//
//
{
serial_numero = numero_serial;
//float tempo=0;
uint8_t taille = 0,i = 0,idata = 0, ipos = 0;
//if (position > 1023) return; //1002-21
if (playtime > 254) return; //1-254 == 11.2ms-2.844sec.
//tempo=playtime*0.012;
taille = 7 + 1 + 4 * nb_servo;
nombre_servo = nb_servo;
pos_time = playtime;
uint8_t txBuf[taille];
etat = pos_mul_complex;
txBuf[0] = HEADER; // Packet Header (0xFF)
txBuf[1] = HEADER; // Packet Header (0xFF)
txBuf[2] = MIN_PACKET_SIZE + 1 + 4 * nb_servo; // Packet Size
//txBuf[3] = MAX_PID; // pID is total number of servos in the network (0 ~ 253)
txBuf[3] = 254; // broadcast ID
txBuf[4] = CMD_S_JOG; // Command S JOG (0x06)
txBuf[5] = 0; // Checksum1
txBuf[6] = 0; // Checksum2
txBuf[7] = playtime; // Playtime
for(i=0; i<nb_servo; i++) {
txBuf[8+i*4] = pos[ipos] & 0x00FF; // Position (LSB, Least Significant Bit)
txBuf[9+i*4] =(pos[ipos] & 0xFF00) >> 8;// position (MSB, Most Significanct Bit)
position_servo_mul[ipos] = pos[ipos];
ipos++;
txBuf[10+i*4] = POS_MODE | data[idata]; // Pos Mode and LED on/off
data_servo_mul[idata] = data[idata];
idata++;
txBuf[11+i*4] = data[idata]; // Servo ID
data_servo_mul[idata] = data[idata];
idata++;
}
// Checksum1 = (PacketSize ^ pID ^ CMD ^ Data[0] ^ Data[1] ^ ... ^ Data[n]) & 0xFE
// Checksum2 = (~Checksum1)&0xFE
txBuf[5] = txBuf[2]^txBuf[3]^txBuf[4]^txBuf[7];
for(i=1; i<(taille-7); i++) {
txBuf[5]=txBuf[5]^txBuf[7+i];
}
txBuf[5] = txBuf[5]& 0xFE;
txBuf[6] = (~txBuf[5])&0xFE;
// send packet (mbed -> herkulex)
if(numero_serial == 1) {
for(uint8_t i = 0; i < taille ; i++) {
while(serial1.writeable() == 0);
serial1.putc(txBuf[i]);
wait_us(100);
}
} else if(numero_serial == 2) {
for(uint8_t i = 0; i < taille ; i++) {
while(serial2.writeable() == 0);
serial2.putc(txBuf[i]);
wait_us(100);
}
} else if(numero_serial == 3) {
for(uint8_t i = 0; i < taille ; i++) {
while(serial3.writeable() == 0);
serial3.putc(txBuf[i]);
wait_us(100);
}
} else if(numero_serial == 4) {
for(uint8_t i = 0; i < taille ; i++) {
while(serial4.writeable() == 0);
serial4.putc(txBuf[i]);
wait_us(100);
}
} else if(numero_serial == 5) {
for(uint8_t i = 0; i < taille ; i++) {
while(serial5.writeable() == 0);
serial5.putc(txBuf[i]);
wait_us(100);
}
}
/*for(uint8_t i = 0; i < taille ; i++)
{
while(serial1.writeable() == 0);
serial1.putc(txBuf[i]);
wait_us(100);
}*/
wait_ms(TEMPO_R);
}
//--fonction de controle de position pour plusieurs servo(different playtime)---
void positionControl_Mul_ensemble_different_complex(uint8_t nb_servo, uint8_t* data, uint16_t* pos, uint8_t numero_serial) // uint16_t position, uint8_t setLED, uint8_t id, uint8_t playtime
//
//Permet de controler tout les servos de la même liaison série avec un temps d'execution différent
//
{
serial_numero = numero_serial;
float tempo=0;
uint8_t Max_playtime = 0;
uint8_t taille = 0,i = 0,idata = 0, ipos = 0,iplay_time = 0;
//if (position > 1023) return; //1002-21
//if (playtime > 254) return; //1-254 == 11.2ms-2.844sec.
for(iplay_time=0; iplay_time<nb_servo; iplay_time++) {
if(Max_playtime<data[2+3*iplay_time]) {
Max_playtime=data[2+3*iplay_time];
}
}
tempo=Max_playtime*0.012;
taille = 7 + 5 * nb_servo;
nombre_servo = nb_servo;
uint8_t txBuf[taille];
etat = pos_mul_complex_different;
txBuf[0] = HEADER; // Packet Header (0xFF)
txBuf[1] = HEADER; // Packet Header (0xFF)
txBuf[2] = MIN_PACKET_SIZE + 5 * nb_servo; // Packet Size
//txBuf[3] = MAX_PID; // pID is total number of servos in the network (0 ~ 253)
txBuf[3] = 254; // broadcast ID
txBuf[4] = CMD_I_JOG; // Command I JOG (0x06)
txBuf[5] = 0; // Checksum1
txBuf[6] = 0; // Checksum2
for(i=0; i<nb_servo; i++) {
txBuf[7+i*5] = pos[ipos] & 0x00FF; // Position (LSB, Least Significant Bit)
txBuf[8+i*5] =(pos[ipos] & 0xFF00) >> 8;// position (MSB, Most Significanct Bit)
position_servo_mul_different[ipos] = pos[ipos];
ipos++;
txBuf[9+i*5] = POS_MODE | data[idata]; // Pos Mode and LED on/off
data_servo_mul_different[idata] = data[idata];
idata++;
txBuf[10+i*5] = data[idata]; // Servo ID
data_servo_mul_different[idata] = data[idata];
idata++;
txBuf[11+i*5] = data[idata]; // Playtime
data_servo_mul_different[idata] = data[idata];
idata++;
}
// Checksum1 = (PacketSize ^ pID ^ CMD ^ Data[0] ^ Data[1] ^ ... ^ Data[n]) & 0xFE
// Checksum2 = (~Checksum1)&0xFE
txBuf[5] = txBuf[2]^txBuf[3]^txBuf[4];
for(i=1; i<(taille-6); i++) {
txBuf[5]=txBuf[5]^txBuf[6+i];
}
txBuf[5] = txBuf[5]& 0xFE;
txBuf[6] = (~txBuf[5])&0xFE;
// send packet (mbed -> herkulex)
if(numero_serial == 1) {
for(uint8_t i = 0; i < taille ; i++) {
while(serial1.writeable() == 0);
serial1.putc(txBuf[i]);
wait_us(100);
}
} else if(numero_serial == 2) {
for(uint8_t i = 0; i < taille ; i++) {
while(serial2.writeable() == 0);
serial2.putc(txBuf[i]);
wait_us(100);
}
} else if(numero_serial == 3) {
for(uint8_t i = 0; i < taille ; i++) {
while(serial3.writeable() == 0);
serial3.putc(txBuf[i]);
wait_us(100);
}
} else if(numero_serial == 4) {
for(uint8_t i = 0; i < taille ; i++) {
while(serial4.writeable() == 0);
serial4.putc(txBuf[i]);
wait_us(100);
}
} else if(numero_serial == 5) {
for(uint8_t i = 0; i < taille ; i++) {
while(serial5.writeable() == 0);
serial5.putc(txBuf[i]);
wait_us(100);
}
}
/*for(uint8_t i = 0; i < taille ; i++)
{
while(serial1.writeable() == 0);
serial1.putc(txBuf[i]);
wait_us(100);
}*/
wait(tempo);
wait_ms(TEMPO_R);
}
//---------------fonction pour lire la tension minimale pour un servo----------------
int8_t Get_Tension_MIN(int8_t id, uint8_t numero_serial)
{
serial_numero = numero_serial;
uint8_t txBuf[9];
int8_t tensionMIN = 0;
txBuf[0] = HEADER; // Packet Header (0xFF)
txBuf[1] = HEADER; // Packet Header (0xFF)
txBuf[2] = MIN_PACKET_SIZE + 2; // Packet Size
txBuf[3] = id; // Servo ID
txBuf[4] = CMD_RAM_READ; // Command Ram Read
txBuf[5] = 0; // Checksum1
txBuf[6] = 0; // Checksum2
txBuf[7] = RAM_MIN_VOLTAGE;
txBuf[8] = BYTE1; // Length
// Check Sum1 and Check Sum2
txBuf[5] = (txBuf[2]^txBuf[3]^txBuf[4]^txBuf[7]^txBuf[8]) & 0xFE;
txBuf[6] = (~txBuf[5])&0xFE;
//pc.printf(" tensionMIN ");
uint8_t rxBuf[12];
if(numero_serial == 1) {
//send packet (mbed -> herkulex)
for(uint8_t i = 0; i < 9 ; i++) {
while(serial1.writeable() == 0);
serial1.putc(txBuf[i]);
wait_us(100);
}
//send packet (mbed -> herkulex)
//uint8_t rxBuf[12];
wait_ms(TEMPO_R);
if(flag_serial1_receive) {
for(unsigned char i4=0; i4<Size_trame_serial1; i4++) {
rxBuf[i4] = char_receive_serial1[i4];
//////pc.printf("%d ",(int)char_receive_serial1[i4]);
}
flag_serial1_receive=0;
valueserial1=0;
}
} else if(numero_serial == 2) {
for(uint8_t i = 0; i < 9 ; i++) {
while(serial2.writeable() == 0);
serial2.putc(txBuf[i]);
wait_us(100);
}
wait_ms(TEMPO_R);
if(flag_serial2_receive) {
for(unsigned char i4=0; i4<Size_trame_serial2; i4++) {
rxBuf[i4] = char_receive_serial2[i4];
//////pc.printf("%d ",(int)char_receive_serial2[i4]);
}
flag_serial2_receive=0;
valueserial2=0;
}
} else if(numero_serial == 3) {
for(uint8_t i = 0; i < 9 ; i++) {
while(serial3.writeable() == 0);
serial3.putc(txBuf[i]);
wait_us(100);
}
wait_ms(TEMPO_R);
if(flag_serial3_receive) {
for(unsigned char i4=0; i4<Size_trame_serial3; i4++) {
rxBuf[i4] = char_receive_serial3[i4];
//////pc.printf("%d ",(int)char_receive_serial3[i4]);
}
flag_serial3_receive=0;
valueserial3=0;
}
} else if(numero_serial == 4) {
for(uint8_t i = 0; i < 9 ; i++) {
while(serial4.writeable() == 0);
serial4.putc(txBuf[i]);
wait_us(100);
}
wait_ms(TEMPO_R);
if(flag_serial4_receive) {
for(unsigned char i4=0; i4<Size_trame_serial4; i4++) {
rxBuf[i4] = char_receive_serial4[i4];
//////pc.printf("%d ",(int)char_receive_serial4[i4]);
}
flag_serial4_receive=0;
valueserial4=0;
}
} else if(numero_serial == 5) {
for(uint8_t i = 0; i < 9 ; i++) {
while(serial5.writeable() == 0);
serial5.putc(txBuf[i]);
wait_us(100);
}
wait_ms(TEMPO_R);
if(flag_serial5_receive) {
for(unsigned char i4=0; i4<Size_trame_serial5; i4++) {
rxBuf[i4] = char_receive_serial5[i4];
//////pc.printf("%d ",(int)char_receive_serial5[i4]);
}
flag_serial5_receive=0;
valueserial5=0;
}
}
/*for(uint8_t i = 0; i < 9 ; i++)
{
while(serial1.writeable() == 0);
serial1.putc(txBuf[i]);
wait_us(100);
}
// send packet (mbed -> herkulex)
uint8_t rxBuf[12];
//wait_ms(3);
wait_ms(TEMPO_R);
if(flag_serial1_receive)
{
for(unsigned char i4=0;i4<Size_trame_serial1; i4++)
{
rxBuf[i4] = char_receive_serial1[i4];
////pc.printf("%d ",(int)char_receive_serial1[i4]);
}
flag_serial1_receive=0;
valueserial1=0;
}*/
uint8_t chksum1 = (rxBuf[2]^rxBuf[3]^rxBuf[4]^rxBuf[7]^rxBuf[8]^rxBuf[9]^rxBuf[10]^rxBuf[11]) & 0xFE;
if (chksum1 != rxBuf[5]) {
/*#ifdef HERKULEX_DEBUG
pc->printf("Checksum1 fault\n");
#endif*/
if(numero_serial == 1) {
flag_serial1_receive=0;
} else if(numero_serial == 2) {
flag_serial2_receive=0;
} else if(numero_serial == 3) {
flag_serial3_receive=0;
} else if(numero_serial == 4) {
flag_serial4_receive=0;
} else if(numero_serial == 5) {
flag_serial5_receive=0;
}
return -1;
}// Checksum2
uint8_t chksum2 = (~rxBuf[5]&0xFE);
if (chksum2 != rxBuf[6]) {
/* #ifdef HERKULEX_DEBUG
pc->printf("Checksum2 fault\n");
#endif*/
if(numero_serial == 1) {
flag_serial1_receive=0;
} else if(numero_serial == 2) {
flag_serial2_receive=0;
} else if(numero_serial == 3) {
flag_serial3_receive=0;
} else if(numero_serial == 4) {
flag_serial4_receive=0;
} else if(numero_serial == 5) {
flag_serial5_receive=0;
}
return -1;
}
tensionMIN = rxBuf[9];
/* #ifdef HERKULEX_DEBUG
pc->printf("position = %04X(%d)\n", position, position);
#endif*/
//}
return tensionMIN;
}
//-------------fonction pour controle la tension min pour un servo--------------
void Set_Tension_MIN(int8_t id,uint8_t Tension_Min, uint8_t numero_serial)
{
serial_numero = numero_serial;
uint8_t txBuf[10];
txBuf[0] = HEADER; // Packet Header (0xFF)
txBuf[1] = HEADER; // Packet Header (0xFF)
txBuf[2] = MIN_PACKET_SIZE + 3; // Packet Size
txBuf[3] = id; // Servo ID
txBuf[4] = CMD_RAM_WRITE; // Command Ram Write (0x03)
txBuf[5] = 0; // Checksum1
txBuf[6] = 0; // Checksum2
txBuf[7] = RAM_MIN_VOLTAGE;
txBuf[8] = BYTE1; // Length
txBuf[9] = Tension_Min;
// Check Sum1 and Check Sum2
txBuf[5] = (txBuf[2]^txBuf[3]^txBuf[4]^txBuf[7]^txBuf[8]^txBuf[9]) & 0xFE;
txBuf[6] = (~txBuf[5])&0xFE;
//pc.printf(" tensionMIN ");
/*for(uint8_t i = 0; i < 10 ; i++)
{
while(serial1.writeable() == 0);
serial1.putc(txBuf[i]);
wait_us(100);
}*/
if(numero_serial == 1) {
for(uint8_t i = 0; i < 10 ; i++) {
while(serial1.writeable() == 0);
serial1.putc(txBuf[i]);
wait_us(100);
}
} else if(numero_serial == 2) {
for(uint8_t i = 0; i < 10 ; i++) {
while(serial2.writeable() == 0);
serial2.putc(txBuf[i]);
wait_us(100);
}
} else if(numero_serial == 3) {
for(uint8_t i = 0; i < 10 ; i++) {
while(serial3.writeable() == 0);
serial3.putc(txBuf[i]);
wait_us(100);
}
} else if(numero_serial == 4) {
for(uint8_t i = 0; i < 10 ; i++) {
while(serial4.writeable() == 0);
serial4.putc(txBuf[i]);
wait_us(100);
}
} else if(numero_serial == 5) {
for(uint8_t i = 0; i < 10 ; i++) {
while(serial5.writeable() == 0);
serial5.putc(txBuf[i]);
wait_us(100);
}
}
//wait_ms(3);
wait_ms(TEMPO_R);
}
//------------fonction pour lire la tension d'un servo-------------
int8_t Get_Tension_actuelle(int8_t id, uint8_t numero_serial)
{
serial_numero = numero_serial;
uint8_t txBuf[9];
int8_t tension = 0;
txBuf[0] = HEADER; // Packet Header (0xFF)
txBuf[1] = HEADER; // Packet Header (0xFF)
txBuf[2] = MIN_PACKET_SIZE + 2; // Packet Size
txBuf[3] = id; // Servo ID
txBuf[4] = CMD_RAM_READ; // Command Ram Read (0x03)
txBuf[5] = 0; // Checksum1
txBuf[6] = 0; // Checksum2
txBuf[7] = RAM_VOLTAGE;
txBuf[8] = BYTE2; // Length
// Check Sum1 and Check Sum2
txBuf[5] = (txBuf[2]^txBuf[3]^txBuf[4]^txBuf[7]^txBuf[8]) & 0xFE;
txBuf[6] = (~txBuf[5])&0xFE;
//pc.printf(" tension ");
uint8_t rxBuf[13];
if(numero_serial == 1) {
//send packet (mbed -> herkulex)
for(uint8_t i = 0; i < 9 ; i++) {
while(serial1.writeable() == 0);
serial1.putc(txBuf[i]);
wait_us(100);
}
//send packet (mbed -> herkulex)
//uint8_t rxBuf[13];
wait_ms(TEMPO_R);
if(flag_serial1_receive) {
for(unsigned char i4=0; i4<Size_trame_serial1; i4++) {
rxBuf[i4] = char_receive_serial1[i4];
//////pc.printf("%d ",(int)char_receive_serial1[i4]);
}
flag_serial1_receive=0;
valueserial1=0;
}
} else if(numero_serial == 2) {
for(uint8_t i = 0; i < 9 ; i++) {
while(serial2.writeable() == 0);
serial2.putc(txBuf[i]);
wait_us(100);
}
wait_ms(TEMPO_R);
if(flag_serial2_receive) {
for(unsigned char i4=0; i4<Size_trame_serial2; i4++) {
rxBuf[i4] = char_receive_serial2[i4];
//////pc.printf("%d ",(int)char_receive_serial2[i4]);
}
flag_serial2_receive=0;
valueserial2=0;
}
} else if(numero_serial == 3) {
for(uint8_t i = 0; i < 9 ; i++) {
while(serial3.writeable() == 0);
serial3.putc(txBuf[i]);
wait_us(100);
}
wait_ms(TEMPO_R);
if(flag_serial3_receive) {
for(unsigned char i4=0; i4<Size_trame_serial3; i4++) {
rxBuf[i4] = char_receive_serial3[i4];
//////pc.printf("%d ",(int)char_receive_serial3[i4]);
}
flag_serial3_receive=0;
valueserial3=0;
}
} else if(numero_serial == 4) {
for(uint8_t i = 0; i < 9 ; i++) {
while(serial4.writeable() == 0);
serial4.putc(txBuf[i]);
wait_us(100);
}
wait_ms(TEMPO_R);
if(flag_serial4_receive) {
for(unsigned char i4=0; i4<Size_trame_serial4; i4++) {
rxBuf[i4] = char_receive_serial4[i4];
//////pc.printf("%d ",(int)char_receive_serial4[i4]);
}
flag_serial4_receive=0;
valueserial4=0;
}
} else if(numero_serial == 5) {
for(uint8_t i = 0; i < 9 ; i++) {
while(serial5.writeable() == 0);
serial5.putc(txBuf[i]);
wait_us(100);
}
wait_ms(TEMPO_R);
if(flag_serial5_receive) {
for(unsigned char i4=0; i4<Size_trame_serial5; i4++) {
rxBuf[i4] = char_receive_serial5[i4];
//////pc.printf("%d ",(int)char_receive_serial5[i4]);
}
flag_serial5_receive=0;
valueserial5=0;
}
}
/*
for(uint8_t i = 0; i < 9 ; i++)
{
while(serial1.writeable() == 0);
serial1.putc(txBuf[i]);
wait_us(100);
}
// send packet (mbed -> herkulex)
uint8_t rxBuf[13];
//wait_ms(3);
wait_ms(TEMPO_R);
if(flag_serial1_receive)
{
for(unsigned char i4=0;i4<Size_trame_serial1; i4++)
{
rxBuf[i4] = char_receive_serial1[i4];
////pc.printf("%d ",(int)char_receive_serial1[i4]);
}
flag_serial1_receive=0;
valueserial1=0;
}
*/
uint8_t chksum1 = (rxBuf[2]^rxBuf[3]^rxBuf[4]^rxBuf[7]^rxBuf[8]^rxBuf[9]^rxBuf[10]^rxBuf[11]^rxBuf[12]) & 0xFE;
if (chksum1 != rxBuf[5]) {
/*#ifdef HERKULEX_DEBUG
pc->printf("Checksum1 fault\n");
#endif*/
if(numero_serial == 1) {
flag_serial1_receive=0;
} else if(numero_serial == 2) {
flag_serial2_receive=0;
} else if(numero_serial == 3) {
flag_serial3_receive=0;
} else if(numero_serial == 4) {
flag_serial4_receive=0;
} else if(numero_serial == 5) {
flag_serial5_receive=0;
}
return -1;
}// Checksum2
uint8_t chksum2 = (~rxBuf[5]&0xFE);
if (chksum2 != rxBuf[6]) {
/* #ifdef HERKULEX_DEBUG
pc->printf("Checksum2 fault\n");
#endif*/
if(numero_serial == 1) {
flag_serial1_receive=0;
} else if(numero_serial == 2) {
flag_serial2_receive=0;
} else if(numero_serial == 3) {
flag_serial3_receive=0;
} else if(numero_serial == 4) {
flag_serial4_receive=0;
} else if(numero_serial == 5) {
flag_serial5_receive=0;
}
return -1;
} tension = rxBuf[9];
/* #ifdef HERKULEX_DEBUG
pc->printf("position = %04X(%d)\n", position, position);
#endif*/
//}
return tension;
}
//-----------------------------------------------------------------------------------------
void servo_interrupt_en(void)
{
Interrupt1_en();
Interrupt2_en();
Interrupt3_en();
Interrupt4_en();
Interrupt5_en();
}
int8_t Get_Led(uint8_t id, uint8_t numero_serie)
{
char numero_serial = numero_serie;
uint8_t txBuf[7];
txBuf[0] = HEADER; // Packet Header (0xFF)
txBuf[1] = HEADER; // Packet Header (0xFF)
txBuf[2] = 0x07; // Packet Size
txBuf[3] = id; // Servo ID
txBuf[4] = 0x05; // Command Ram Write (0x03) *On choisi le CMD pour écrire dans un registre
txBuf[5] = 0; // Checksum1
txBuf[6] = 0; // Checksum2
// calcul des checksums //
txBuf[5]=(txBuf[2]^txBuf[3]^txBuf[4]) & 0xFE; // checksum1
txBuf[5] &= 0xFE; // checksum1
txBuf[6] = (~txBuf[5] & 0xFE);//checksum2
// envoi //
//txPacket(0x07,txBuf,numero_serial);
//reception
uint8_t rxBuf[9];
if(numero_serial == 1) {
for(uint8_t i = 0; i < 7 ; i++) {
while(serial1.writeable() == 0);
serial1.putc(txBuf[i]);
wait_us(100);
}
wait_ms(TEMPO_R);
if(flag_serial1_receive) {
for(unsigned char i4=0; i4<8; i4++) {
rxBuf[i4] = char_receive_serial1[i4];
}
flag_serial1_receive=0;
valueserial1=0;
}
} else if(numero_serial == 2) {
for(uint8_t i = 0; i < 7 ; i++) {
while(serial2.writeable() == 0);
serial2.putc(txBuf[i]);
wait_us(100);
}
wait_ms(TEMPO_R);
if(flag_serial2_receive) {
for(unsigned char i4=0; i4<8; i4++) {
rxBuf[i4] = char_receive_serial2[i4];
}
flag_serial2_receive=0;
valueserial2=0;
}
} else if(numero_serial == 3) {
for(uint8_t i = 0; i < 7 ; i++) {
while(serial3.writeable() == 0);
serial3.putc(txBuf[i]);
wait_us(100);
}
wait_ms(TEMPO_R);
if(flag_serial3_receive) {
for(unsigned char i4=0; i4<8; i4++) {
rxBuf[i4] = char_receive_serial3[i4];
}
flag_serial3_receive=0;
valueserial3=0;
}
} else if(numero_serial == 4) {
for(uint8_t i = 0; i < 7 ; i++) {
while(serial4.writeable() == 0);
serial4.putc(txBuf[i]);
wait_us(100);
}
wait_ms(TEMPO_R);
if(flag_serial4_receive) {
for(unsigned char i4=0; i4<8; i4++) {
rxBuf[i4] = char_receive_serial4[i4];
}
flag_serial4_receive=0;
valueserial4=0;
}
} else if(numero_serial == 5) {
for(uint8_t i = 0; i < 7 ; i++) {
while(serial5.writeable() == 0);
serial5.putc(txBuf[i]);
wait_us(100);
}
wait_ms(TEMPO_R);
if(flag_serial5_receive) {
for(unsigned char i4=0; i4<8; i4++) {
rxBuf[i4] = char_receive_serial5[i4];
}
flag_serial5_receive=0;
valueserial5=0;
}
}
// Checksum1
uint8_t chksum1 = (rxBuf[2]^rxBuf[3]^rxBuf[4]^rxBuf[7]) & 0xFE;
if (chksum1 != rxBuf[5]) {
if(numero_serial == 1) {
flag_serial1_receive=0;
} else if(numero_serial == 2) {
flag_serial2_receive=0;
} else if(numero_serial == 3) {
flag_serial3_receive=0;
} else if(numero_serial == 4) {
flag_serial4_receive=0;
} else if(numero_serial == 5) {
flag_serial5_receive=0;
}
return -1;
}// Checksum2
uint8_t chksum2 = (~rxBuf[5]&0xFE);
if (chksum2 != rxBuf[6]) {
if(numero_serial == 1) {
flag_serial1_receive=0;
} else if(numero_serial == 2) {
flag_serial2_receive=0;
} else if(numero_serial == 3) {
flag_serial3_receive=0;
} else if(numero_serial == 4) {
flag_serial4_receive=0;
} else if(numero_serial == 5) {
flag_serial5_receive=0;
}
return -1;
} int8_t couleur_hrk = rxBuf[7]; // Couleur
return couleur_hrk;
}