File content as of revision 2:becb78cfc927:

#include "mbed.h"

//  Left Motor
#define PWM_L A6
#define DIR_L A3
//  Right Motor
#define PWM_R A2
#define DIR_R D12
//  default setting
#define DIR_DEFAULT_L 1
#define DIR_DEFAULT_R 0

//  Math Function
#define PI 3.14159265359
//  power clock
#define POWER_CHANGE_PER_CLOCK 5

//  PWM
PwmOut pwmL(PWM_L);
//  DIR
DigitalOut dirL(DIR_L);
//  PWM
PwmOut pwmR(PWM_R);
//  DIR
DigitalOut dirR(DIR_R);

//  serial
Serial serial(D5,D4);

//  joystick analogin
//AnalogIn joyX(A0);
//AnalogIn joyY(A1);
//  stick value
float x = 0.5F;
float y = 0.5F;


//  current power
double currentPowerL = 0;
double currentPowerR = 0;

//  attach function
void control_rx();

int main()
{
    //printf("start program... \n\r");
    //  period
    pwmL.period_us(100);
    pwmR.period_us(100);
    //  Dir
    dirL = DIR_DEFAULT_L;
    dirR = DIR_DEFAULT_R;
    //  power setting
    float maxPower = 0.9F;
    
    //  serial attach
    serial.attach(control_rx,Serial::RxIrq);
    
    //printf("finish start up! \n\r");

    while(1){
        //  prepare power value
        float powerL,powerR;
        
        //float x = joyX.read();  //  go ahead & back
        //float y = joyY.read();  //  left & right
        //  value format
        if(x > 1) x = 1.0;
        if(x < 0) x = 0.0;
        if(y > 1) y = 1.0;
        if(y < 0) y = 0.0;
        //  off set
        //if(0.48F < x && x < 0.52F)x = 0.5F;
        //if(0.48F < y && y < 0.52F)y = 0.5F;
        
        //  format x and y
        double formatX = (2*x) - 1;
        double formatY = (2*y) - 1;
        //  tan
        double tan = formatY / formatX;
        //  arc tan
        double arctan = (double) atan(tan);
        //  angle
        double angle = arctan * (180 / PI);
        //  range
        double range = sqrt((formatX * formatX) + (formatY * formatY));
        if(range > 1.0F) range = 1.0F;
        //  all power
        double allPower = maxPower * (range / 1);
        
        //  right left power persent
        double rightPowerPercent,leftPowerPercent;
        int area = 0;
        //1
        if((0 < formatX && formatX < 1) && (0 < formatY && formatY < 1)){
            rightPowerPercent = ((angle / 45) - 1) / 1;
            leftPowerPercent = 1;
            
            area = 1;
        }
        //2
        if((formatX < 0 && -1 < formatX) && (0 < formatY && formatY < 1)){
            rightPowerPercent = 1;
            leftPowerPercent = ((-angle / 45) - 1) / 1;
            
            area = 2;
        }
        //3
        if((formatX < 0 && -1 < formatX) && (formatY < 0 && -1 < formatY)){
            rightPowerPercent = ((-angle / 45) + 1) / 1;
            leftPowerPercent = -1;
        
            area = 3;
        }
        //4
        if((formatX > 0 && formatX < 1) && (formatY < 0 && formatY > -1)){
            rightPowerPercent = -1;
            leftPowerPercent = ((angle / 45) + 1) / 1;
        
            area = 4;
        }
        if(area == 0){
            rightPowerPercent = 0;
            leftPowerPercent = 0;
        }
        
        //  convert power persent to real power
        powerL = allPower * leftPowerPercent;
        powerR = allPower * rightPowerPercent;
        
        //  need to change power(power distance)
        double needChangePowerL = powerL - currentPowerL;
        double needChangePowerR = powerR - currentPowerR;
        //  change power
        double changePowerL = needChangePowerL / POWER_CHANGE_PER_CLOCK;
        double changePowerR = needChangePowerR / POWER_CHANGE_PER_CLOCK;
        //  set power
        powerL = currentPowerL + changePowerL;
        powerR = currentPowerR + changePowerR;
        //  save current power
        currentPowerL = powerL;
        currentPowerR = powerR;
        
        //printf("before:%lf %lf distance:%lf %lf change:%lf %lf after:%lf %lf \n\r",powerL,powerR,needChangePowerL,needChangePowerR,changePowerL,changePowerR,powerL,powerR);
        
        if(powerL >= 0){
            dirL = DIR_DEFAULT_L;    
        }else{
            powerL = -powerL;
            dirL = !DIR_DEFAULT_L;
        }
        if(powerR >= 0){
            dirR = DIR_DEFAULT_R;    
        }else{
            powerR = -powerR;
            dirR = !DIR_DEFAULT_R;
        }
        
        pwmL.write((float)powerL);
        pwmR.write((float)powerR);
        
        wait_ms(50);
        //printf("powerL:%f powerR:%f formatX:%0lf formatY:%0lf angle:%d range:%0lf area: %d Lper:%0lf Rper:%0lf \n\r",powerL,powerR,formatX,formatY,(int) angle,range,area,leftPowerPercent,rightPowerPercent);
    }
}

void control_rx(){
    int head = 0;
    char bytesX[4];
    char bytesY[4];
    
    while(serial.readable()){
        char c = serial.getc();
        
        if(c == 0x3a){
            head = 0;
            continue;
        }
        if(head < 3){
            bytesX[head] = c;
        }else{
            bytesY[head - 3] = c;
        }
        if(head == 6){
            //  printf
            int32_t intX = (bytesX[0] << 24) + (bytesX[1] << 16) + (bytesX[2] << 8) + bytesX[3];
            int32_t intY = (bytesY[0] << 24) + (bytesY[1] << 16) + (bytesY[2] << 8) + bytesY[3];            
            //  cast float to double
            float formatX = (float) intX;
            float formatY = (float) intY;
            //  save
            x = formatX;
            y = formatY;
        }
        head++;
    }
}