add rotary

Dependencies:   X_NUCLEO_IKS01A1 LoRaWAN-lib SX1272Lib mbed

Fork of Canada-SX1272-LoRaWAN-Bootcamp by Uttam Bhat

LoRaWAN-SX1272-Mbed-Shield


Overview

LoRaWAN-SX1272-Mbed-Shield application demo is a LoRaWAN Class-A device example project using LoRaWAN-lib and SX1272Lib libraries that send out sensors data.

Prerequisites

1. NUCLEO_L152RE board.
2. SX1272-mbed-shield board.
3. X-NUCLEO-IKS01A1.
4. Grove Red LED.
5. Grove Button.
6. Grove Rotary Angle Sensor.
7. mbed online compiler.
8. Tera Term.

Hardware Configuration

Application 8, 9, 11
1. Connect NUCLEO_L152RE with X-NUCLEO-IKS01A1.
2. On top of X-NUCLEO-IKS01A1, connect SX1272-mbed-shield.
Application 13
1. Connect NUCLEO_L152RE with SX1272-mbed-shield.
2. Connect Grove Red LED with DIO_D6 port on SX1272-mbed-shield.
3. Connect Grove Button with DIO_D8 port on SX1272-mbed-shield.
4. Connect Grove Rotary Angle Sensor with ANA_A1 port SX1272-mbed-shield.

Software Configuration

The end-device must be configured with the following parameters:

  • Commissioning.h
    • Activation Type: OTA or ABP
      • OTA: #define OVER_THE_AIR_ACTIVATION 1
    • Network Type: Public or Private
      • Public: #define LORAWAN_PUBLIC_NETWORK true
    • LORAWAN_DEVICE_EUI (8 Bytes) : Fist 3 Bytes is the Organizationally Unique Identifier (OUI) followed by 5 bytes of unique ID. If not defined by user, then the firmware automatically assigns one to the end-device. (For OTA)
      • #define IEEE_OUI 0x00, 0x00, 0x00
      • #define LORAWAN_DEVICE_EUI { IEEE_OUI, 0x00, 0x00, 0x00, 0x00, 0x00 }
    • LORAWAN_APPLICATION_EUI (8 Bytes) (For OTA)
      • #define LORAWAN_APPLICATION_EUI { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }
    • LORAWAN_APPLICATION_KEY (16 Bytes) (For OTA)
      • #define LORAWAN_APPLICATION_KEY { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, 0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff }
    • LORAWAN_DEVICE_ADDRESS (For ABP)
      • #define LORAWAN_DEVICE_ADDRESS ( uint32_t )0x0
    • LORAWAN_NWKSKEY (For ABP)
      • #define LORAWAN_NWKSKEY { 0x2B, 0x7E, 0x15, 0x16, 0x28, 0xAE, 0xD2, 0xA6, 0xAB, 0xF7, 0x15, 0x88, 0x09, 0xCF, 0x4F, 0x3C }
    • LORAWAN_APPSKEY (For ABP)
      • #define LORAWAN_APPSKEY { 0x2B, 0x7E, 0x15, 0x16, 0x28, 0xAE, 0xD2, 0xA6, 0xAB, 0xF7, 0x15, 0x88, 0x09, 0xCF, 0x4F, 0x3C }
  • Configure.h
    • Communication Type: Hybrid or FHSS
      • Hybrid: #define USE_BAND_915_HYBRID
    • Join request Period:
      • 5 sec: #define OVER_THE_AIR_ACTIVATION_DUTYCYCLE 5000000 value in us
    • TX Period:
      • 5 sec: #define APP_TX_DUTYCYCLE 5000000 value in us
    • Uplink message: Confirmed or Unconfirmed
      • Confirmed: #define LORAWAN_CONFIRMED_MSG_ON 1
    • ADR(Adaptive Data Rate): ON or OFF
      • OFF: #define LORAWAN_ADR_ON 0
    • Default data rate: DR_0 or DR_1 or DR_2 or DR_3 or DR_4
      • DR_0: #define LORAWAN_DEFAULT_DATARATE DR_0
    • Application Type: 8 (IKS01A1) or 9 (IKS01A1+Cayenne) or 11 (Push Button) or 13 (rotary+Cayenne)
      • 9: #define LORAWAN_APP_PORT 9
    • Tx Power: 10 to 30
      • 20 dBm: #define LORAWAN_TX_POWER TX_POWER_20_DBM

Serial Terminal Display

  • Use Tera Term to see the sending message (baud rate: 115200):
    • button = 0 (if not press) button = 1 (if pressed)
    • rotary = 0 ~ 300

1800

app/SerialDisplay.cpp

Committer:
ubhat
Date:
2017-04-06
Revision:
0:6cc76d70e2a1
Child:
5:e21b38612c21

File content as of revision 0:6cc76d70e2a1:

/*
 / _____)             _              | |
( (____  _____ ____ _| |_ _____  ____| |__
 \____ \| ___ |    (_   _) ___ |/ ___)  _ \
 _____) ) ____| | | || |_| ____( (___| | | |
(______/|_____)_|_|_| \__)_____)\____)_| |_|
    (C)2015 Semtech

Description: VT100 serial display management

License: Revised BSD License, see LICENSE.TXT file include in the project

Maintainer: Miguel Luis and Gregory Cristian
*/

#include "SerialDisplay.h"

VT100 vt( USBTX, USBRX );

void SerialDisplayJoinUpdate( void )
{
    printf( "###### ===== JOINING ==== ######\r\n" );
    
    DisplayNetworkParam( );

    printf( "\r\n" );
}

void SerialDisplayTxUpdate(void)
{
    printf( "###### ===== UPLINK FRAME %d ==== ######\r\n", LoRaMacUplinkStatus.UplinkCounter );

    DisplayNetworkParam( );
    
    printf( "TX PORT: %d\r\n", LoRaMacUplinkStatus.Port );

    if( LoRaMacUplinkStatus.BufferSize != 0 )
    {
        printf( "TX DATA: " );
        if( LoRaMacUplinkStatus.Type == MCPS_CONFIRMED )
        {
            printf( "CONFIRMED\r\n" );
        }
        else
        {
            printf( "UNCONFIRMED\r\n" );
        }
        SerialDisplayHex( LoRaMacUplinkStatus.Buffer, LoRaMacUplinkStatus.BufferSize );
    }

    printf( "DATA RATE: DR%d\r\n", LoRaMacUplinkStatus.Datarate );

    printf( "TX POWER: %d dBm\r\n", 30 - ( LoRaMacUplinkStatus.TxPower << 1 ) );

    printf( "BATTERY: %2.2fV\r\n", BoardGetBatteryLevel( ) );

    printf( "\r\n");
}

void SerialDisplayRxUpdate( void )
{
    printf( "###### ===== DOWNLINK FRAME %d ==== ######\r\n", LoRaMacDownlinkStatus.DownlinkCounter );

    printf( "RX WINDOW: %d\r\n", LoRaMacDownlinkStatus.RxSlot + 1 );
    
    printf( "RX PORT: %d\r\n", LoRaMacDownlinkStatus.Port );

    if( LoRaMacDownlinkStatus.BufferSize != 0 )
    {
        printf( "RX DATA: \r\n" );
        SerialDisplayHex( LoRaMacDownlinkStatus.Buffer, LoRaMacDownlinkStatus.BufferSize );
    }

    printf( "RX RSSI: %d\r\n", LoRaMacDownlinkStatus.Rssi );

    printf( "RX SNR: %d\r\n", LoRaMacDownlinkStatus.Snr );

    printf( "\r\n" );
}

void SerialDisplayHex( uint8_t *pData, uint8_t len )
{
    int i;
    bool newline = 0;

    for( i = 0; i < len; i++ )
    {
        if( newline != 0 )
        {
            printf( "\r\n" );
            newline = 0;
        }

        printf( "%02X ", pData[i] );

        if( ( ( i + 1 ) % 16 ) == 0 )
        {
            newline = 1;
        }
    }
    printf( "\r\n" );
}

void SerialAcclMetrDisplay( uint8_t statusReg )
{
    printf( "===== DEVICE ORIENTATION ====\r\n" );
    if( ( statusReg & 0x40 ) != 0 )
    {
        printf( "HORIZONTAL + " );
        if( ( statusReg & 0x01 ) != 0 )
        {
            printf( "FACE DOWN" );
        }
        else
        {
            printf( "FACE UP" );
        }
    }
    else
    {
        printf( "VERTICAL" ); 
    }
    printf( "\r\n\r\n" );
}

void DisplayNetworkParam( void )
{
#if( OVER_THE_AIR_ACTIVATION != 0 )

    printf( "DEVEUI: " );
    SerialDisplayHex( DevEui, 8 );

    printf( "APPEUI: " );
    SerialDisplayHex( AppEui, 8 );

    printf( "APPKEY: " );
    SerialDisplayHex( AppKey, 16 );

#else

    printf( "DEVADDR: " );
    
    uint8_t *pData = ( uint8_t* )&DevAddr;
    for( int32_t i = 3; i >= 0; i-- )
    {
        printf( "%02X ", pData[i] );
    }
    printf( "\r\n" );

    printf( "NWKSKEY: " );
    SerialDisplayHex( NwkSKey, 16 );

    printf( "APPSKEY: " );
    SerialDisplayHex( AppSKey, 16 );

#endif
}