Terence Huang / Canada-SX1272-LoRaWAN-Bootcamp-rotary

add rotary

Dependencies:   X_NUCLEO_IKS01A1 LoRaWAN-lib SX1272Lib mbed

Fork of Canada-SX1272-LoRaWAN-Bootcamp by Uttam Bhat

LoRaWAN-SX1272-Mbed-Shield

Overview

LoRaWAN-SX1272-Mbed-Shield application demo is a LoRaWAN Class-A device example project using LoRaWAN-lib and SX1272Lib libraries that send out sensors data.

Prerequisites

1. NUCLEO_L152RE board.
2. SX1272-mbed-shield board.
3. X-NUCLEO-IKS01A1.
4. Grove Red LED.
5. Grove Button.
6. Grove Rotary Angle Sensor.
7. mbed online compiler.
8. Tera Term.

Hardware Configuration

Application 8, 9, 11
1. Connect NUCLEO_L152RE with X-NUCLEO-IKS01A1.
2. On top of X-NUCLEO-IKS01A1, connect SX1272-mbed-shield.
Application 13
1. Connect NUCLEO_L152RE with SX1272-mbed-shield.
2. Connect Grove Red LED with DIO_D6 port on SX1272-mbed-shield.
3. Connect Grove Button with DIO_D8 port on SX1272-mbed-shield.
4. Connect Grove Rotary Angle Sensor with ANA_A1 port SX1272-mbed-shield.

Software Configuration

The end-device must be configured with the following parameters:

• Commissioning.h
  • Activation Type: OTA or ABP
    • OTA: #define OVER_THE_AIR_ACTIVATION 1
  • Network Type: Public or Private
    • Public: #define LORAWAN_PUBLIC_NETWORK true
  • LORAWAN_DEVICE_EUI (8 Bytes) : Fist 3 Bytes is the Organizationally Unique Identifier (OUI) followed by 5 bytes of unique ID. If not defined by user, then the firmware automatically assigns one to the end-device. (For OTA)
    
    • #define IEEE_OUI 0x00, 0x00, 0x00
      
    • #define LORAWAN_DEVICE_EUI { IEEE_OUI, 0x00, 0x00, 0x00, 0x00, 0x00 }
  • LORAWAN_APPLICATION_EUI (8 Bytes) (For OTA)
    
    • #define LORAWAN_APPLICATION_EUI { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }
  • LORAWAN_APPLICATION_KEY (16 Bytes) (For OTA)
    
    • #define LORAWAN_APPLICATION_KEY { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, 0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff }
      
  • LORAWAN_DEVICE_ADDRESS (For ABP)
    • #define LORAWAN_DEVICE_ADDRESS ( uint32_t )0x0
  • LORAWAN_NWKSKEY (For ABP)
    • #define LORAWAN_NWKSKEY { 0x2B, 0x7E, 0x15, 0x16, 0x28, 0xAE, 0xD2, 0xA6, 0xAB, 0xF7, 0x15, 0x88, 0x09, 0xCF, 0x4F, 0x3C }
  • LORAWAN_APPSKEY (For ABP)
    • #define LORAWAN_APPSKEY { 0x2B, 0x7E, 0x15, 0x16, 0x28, 0xAE, 0xD2, 0xA6, 0xAB, 0xF7, 0x15, 0x88, 0x09, 0xCF, 0x4F, 0x3C }

• Configure.h
  • Communication Type: Hybrid or FHSS
    • Hybrid: #define USE_BAND_915_HYBRID
  • Join request Period:
    • 5 sec: #define OVER_THE_AIR_ACTIVATION_DUTYCYCLE 5000000 value in us
  • TX Period:
    • 5 sec: #define APP_TX_DUTYCYCLE 5000000 value in us
  • Uplink message: Confirmed or Unconfirmed
    • Confirmed: #define LORAWAN_CONFIRMED_MSG_ON 1
  • ADR(Adaptive Data Rate): ON or OFF
    • OFF: #define LORAWAN_ADR_ON 0
  • Default data rate: DR_0 or DR_1 or DR_2 or DR_3 or DR_4
    • DR_0: #define LORAWAN_DEFAULT_DATARATE DR_0
  • Application Type: 8 (IKS01A1) or 9 (IKS01A1+Cayenne) or 11 (Push Button) or 13 (rotary+Cayenne)
    • 9: #define LORAWAN_APP_PORT 9
  • Tx Power: 10 to 30
    • 20 dBm: #define LORAWAN_TX_POWER TX_POWER_20_DBM

Serial Terminal Display

• Use Tera Term to see the sending message (baud rate: 115200):
  
  • button = 0 (if not press) button = 1 (if pressed)
    
  • rotary = 0 ~ 300

/*
 / _____)             _              | |
( (____  _____ ____ _| |_ _____  ____| |__
 \____ \| ___ |    (_   _) ___ |/ ___)  _ \
 _____) ) ____| | | || |_| ____( (___| | | |
(______/|_____)_|_|_| \__)_____)\____)_| |_|
    (C)2015 Semtech

Description: Target board general functions implementation

License: Revised BSD License, see LICENSE.TXT file include in the project

Maintainer: Miguel Luis and Gregory Cristian
*/
#include "mbed.h"
#include "board.h"

DigitalIn I2cInterrupt( PB_4 );
I2C I2c(I2C_SDA, I2C_SCL);

DigitalOut Pc7( PC_7 );
DigitalIn Pc1( PC_1 );

DigitalIn UsrButton( PC_13 );

DigitalOut Led( PB_10 );

#ifdef USE_IKS01A1_SENSOR
X_NUCLEO_IKS01A1 *mems_expansion_board = X_NUCLEO_IKS01A1::Instance();
MotionSensor *accelerometer = mems_expansion_board->GetAccelerometer();
HumiditySensor *humidity_sensor = mems_expansion_board->ht_sensor;;
PressureSensor *pressure_sensor = mems_expansion_board->pt_sensor;
TempSensor *temp_sensor1 = mems_expansion_board->ht_sensor;
TempSensor *temp_sensor2 = mems_expansion_board->pt_sensor;
#endif

SX1272MB2xAS Radio( NULL );

void BoardInit( void )
{
    TimerTimeCounterInit( );
}

uint8_t BoardGetBatteryLevel( void ) 
{
    return 0xFE;
}

uint32_t BoardGetRandomSeed( void )
{
    return ( ( *( uint32_t* )ID1 ) ^ ( *( uint32_t* )ID2 ) ^ ( *( uint32_t* )ID3 ) );
}

void BoardGetDevEUI( uint8_t *id )
{
    uint32_t *pDevEuiHWord = ( uint32_t* )&id[4];

    if( *pDevEuiHWord == 0 )
    {        
        *pDevEuiHWord = BoardGetRandomSeed( );
    }
    
}

void BoardGetUniqueId( uint8_t *id )
{
    id[7] = ( ( *( uint32_t* )ID1 )+ ( *( uint32_t* )ID3 ) ) >> 24;
    id[6] = ( ( *( uint32_t* )ID1 )+ ( *( uint32_t* )ID3 ) ) >> 16;
    id[5] = ( ( *( uint32_t* )ID1 )+ ( *( uint32_t* )ID3 ) ) >> 8;
    id[4] = ( ( *( uint32_t* )ID1 )+ ( *( uint32_t* )ID3 ) );
    id[3] = ( ( *( uint32_t* )ID2 ) ) >> 24;
    id[2] = ( ( *( uint32_t* )ID2 ) ) >> 16;
    id[1] = ( ( *( uint32_t* )ID2 ) ) >> 8;
    id[0] = ( ( *( uint32_t* )ID2 ) );
}