Terence Huang / Canada-SX1272-LoRaWAN-Bootcamp-rotary

add rotary

Dependencies:   X_NUCLEO_IKS01A1 LoRaWAN-lib SX1272Lib mbed

Fork of Canada-SX1272-LoRaWAN-Bootcamp by Uttam Bhat

LoRaWAN-SX1272-Mbed-Shield

Overview

LoRaWAN-SX1272-Mbed-Shield application demo is a LoRaWAN Class-A device example project using LoRaWAN-lib and SX1272Lib libraries that send out sensors data.

Prerequisites

1. NUCLEO_L152RE board.
2. SX1272-mbed-shield board.
3. X-NUCLEO-IKS01A1.
4. Grove Red LED.
5. Grove Button.
6. Grove Rotary Angle Sensor.
7. mbed online compiler.
8. Tera Term.

Hardware Configuration

Application 8, 9, 11
1. Connect NUCLEO_L152RE with X-NUCLEO-IKS01A1.
2. On top of X-NUCLEO-IKS01A1, connect SX1272-mbed-shield.
Application 13
1. Connect NUCLEO_L152RE with SX1272-mbed-shield.
2. Connect Grove Red LED with DIO_D6 port on SX1272-mbed-shield.
3. Connect Grove Button with DIO_D8 port on SX1272-mbed-shield.
4. Connect Grove Rotary Angle Sensor with ANA_A1 port SX1272-mbed-shield.

Software Configuration

The end-device must be configured with the following parameters:

  • Commissioning.h
    • Activation Type: OTA or ABP
      • OTA: #define OVER_THE_AIR_ACTIVATION 1
    • Network Type: Public or Private
      • Public: #define LORAWAN_PUBLIC_NETWORK true
    • LORAWAN_DEVICE_EUI (8 Bytes) : Fist 3 Bytes is the Organizationally Unique Identifier (OUI) followed by 5 bytes of unique ID. If not defined by user, then the firmware automatically assigns one to the end-device. (For OTA)
      • #define IEEE_OUI 0x00, 0x00, 0x00
      • #define LORAWAN_DEVICE_EUI { IEEE_OUI, 0x00, 0x00, 0x00, 0x00, 0x00 }
    • LORAWAN_APPLICATION_EUI (8 Bytes) (For OTA)
      • #define LORAWAN_APPLICATION_EUI { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }
    • LORAWAN_APPLICATION_KEY (16 Bytes) (For OTA)
      • #define LORAWAN_APPLICATION_KEY { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, 0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff }
    • LORAWAN_DEVICE_ADDRESS (For ABP)
      • #define LORAWAN_DEVICE_ADDRESS ( uint32_t )0x0
    • LORAWAN_NWKSKEY (For ABP)
      • #define LORAWAN_NWKSKEY { 0x2B, 0x7E, 0x15, 0x16, 0x28, 0xAE, 0xD2, 0xA6, 0xAB, 0xF7, 0x15, 0x88, 0x09, 0xCF, 0x4F, 0x3C }
    • LORAWAN_APPSKEY (For ABP)
      • #define LORAWAN_APPSKEY { 0x2B, 0x7E, 0x15, 0x16, 0x28, 0xAE, 0xD2, 0xA6, 0xAB, 0xF7, 0x15, 0x88, 0x09, 0xCF, 0x4F, 0x3C }
  • Configure.h
    • Communication Type: Hybrid or FHSS
      • Hybrid: #define USE_BAND_915_HYBRID
    • Join request Period:
      • 5 sec: #define OVER_THE_AIR_ACTIVATION_DUTYCYCLE 5000000 value in us
    • TX Period:
      • 5 sec: #define APP_TX_DUTYCYCLE 5000000 value in us
    • Uplink message: Confirmed or Unconfirmed
      • Confirmed: #define LORAWAN_CONFIRMED_MSG_ON 1
    • ADR(Adaptive Data Rate): ON or OFF
      • OFF: #define LORAWAN_ADR_ON 0
    • Default data rate: DR_0 or DR_1 or DR_2 or DR_3 or DR_4
      • DR_0: #define LORAWAN_DEFAULT_DATARATE DR_0
    • Application Type: 8 (IKS01A1) or 9 (IKS01A1+Cayenne) or 11 (Push Button) or 13 (rotary+Cayenne)
      • 9: #define LORAWAN_APP_PORT 9
    • Tx Power: 10 to 30
      • 20 dBm: #define LORAWAN_TX_POWER TX_POWER_20_DBM

Serial Terminal Display

  • Use Tera Term to see the sending message (baud rate: 115200):
    • button = 0 (if not press) button = 1 (if pressed)
    • rotary = 0 ~ 300

1800

app/LoRaApp.h@6:ab743407f248, 2017-07-20 (annotated)

Committer:
terence
Date:
Thu Jul 20 16:16:54 2017 -0700
Revision:
6:ab743407f248
Parent:
5:e21b38612c21 
Rm gps application

Who changed what in which revision?

UserRevisionLine numberNew contents of line
ubhat 0:6cc76d70e2a1 1 /*
ubhat 0:6cc76d70e2a1 2 / _____) _ | |
ubhat 0:6cc76d70e2a1 3 ( (____ _____ ____ _| |_ _____ ____| |__
ubhat 0:6cc76d70e2a1 4 \____ \| ___ | (_ _) ___ |/ ___) _ \
ubhat 0:6cc76d70e2a1 5 _____) ) ____| | | || |_| ____( (___| | | |
ubhat 0:6cc76d70e2a1 6 (______/|_____)_|_|_| \__)_____)\____)_| |_|
ubhat 0:6cc76d70e2a1 7 (C)2015 Semtech
ubhat 0:6cc76d70e2a1 8
ubhat 0:6cc76d70e2a1 9 Description: User-defined applications such as GPS, Temp, Accelerometer, LED indications etc.
ubhat 0:6cc76d70e2a1 10 Event based actions such as LED blink on Tx, LED toggle on downlink etc
ubhat 0:6cc76d70e2a1 11
ubhat 0:6cc76d70e2a1 12 License: Revised BSD License, see LICENSE.TXT file include in the project
ubhat 0:6cc76d70e2a1 13
ubhat 0:6cc76d70e2a1 14 Maintainer: Uttam Bhat
ubhat 0:6cc76d70e2a1 15 */
ubhat 0:6cc76d70e2a1 16
ubhat 0:6cc76d70e2a1 17 #ifndef __APPLICATION_H__
ubhat 0:6cc76d70e2a1 18 #define __APPLICATION_H__
ubhat 0:6cc76d70e2a1 19
ubhat 0:6cc76d70e2a1 20 #include "board.h"
ubhat 0:6cc76d70e2a1 21 #include "Common.h"
ubhat 0:6cc76d70e2a1 22 #include "SerialDisplay.h"
ubhat 0:6cc76d70e2a1 23
ubhat 0:6cc76d70e2a1 24 /*!
ubhat 0:6cc76d70e2a1 25 * LED ON/OFF definition
ubhat 0:6cc76d70e2a1 26 */
ubhat 0:6cc76d70e2a1 27 #define LED_ON 0
ubhat 0:6cc76d70e2a1 28 #define LED_OFF 1
ubhat 0:6cc76d70e2a1 29
ubhat 0:6cc76d70e2a1 30 /*!
ubhat 0:6cc76d70e2a1 31 * LED types
ubhat 0:6cc76d70e2a1 32 */
ubhat 0:6cc76d70e2a1 33 enum eLedType
ubhat 0:6cc76d70e2a1 34 {
ubhat 0:6cc76d70e2a1 35 Red = 0,// Red LED
ubhat 0:6cc76d70e2a1 36 Yellow = 1, // Yellow LED
ubhat 0:6cc76d70e2a1 37 Green = 2, // Green LED
ubhat 0:6cc76d70e2a1 38 Usr = 3, // USR LED
ubhat 0:6cc76d70e2a1 39 };
ubhat 0:6cc76d70e2a1 40
ubhat 0:6cc76d70e2a1 41 /*!
ubhat 0:6cc76d70e2a1 42 * user-defined Application names
ubhat 0:6cc76d70e2a1 43 */
ubhat 0:6cc76d70e2a1 44 enum eAppType
ubhat 0:6cc76d70e2a1 45 {
ubhat 0:6cc76d70e2a1 46 AppPressr = 0, // Pressure measurement application
ubhat 0:6cc76d70e2a1 47 AppTemp, // Temperature measurement application
ubhat 0:6cc76d70e2a1 48 AppHumid, // Humidity measurement application
ubhat 0:6cc76d70e2a1 49 AppAccl, // Accelerometer application
ubhat 0:6cc76d70e2a1 50 AppPushButton, // Push button application example
terence304 2:5859f5872d6c 51 AppButton, // external push button
terence304 2:5859f5872d6c 52 AppRotary, // external rotary sensor
ubhat 0:6cc76d70e2a1 53 };
ubhat 0:6cc76d70e2a1 54
ubhat 0:6cc76d70e2a1 55 /*!
ubhat 0:6cc76d70e2a1 56 * Application
ubhat 0:6cc76d70e2a1 57 */
ubhat 0:6cc76d70e2a1 58 class Application
ubhat 0:6cc76d70e2a1 59 {
ubhat 0:6cc76d70e2a1 60 public:
ubhat 0:6cc76d70e2a1 61 /*!
ubhat 0:6cc76d70e2a1 62 * \brief Initializes TX buffer address to private pointer
ubhat 0:6cc76d70e2a1 63 *
ubhat 0:6cc76d70e2a1 64 * \param [IN] memptr pointer to TX buffer
ubhat 0:6cc76d70e2a1 65 */
ubhat 0:6cc76d70e2a1 66 Application( uint8_t * memptr );
ubhat 0:6cc76d70e2a1 67
ubhat 0:6cc76d70e2a1 68 /*!
ubhat 0:6cc76d70e2a1 69 * \brief Application Destructor
ubhat 0:6cc76d70e2a1 70 */
ubhat 0:6cc76d70e2a1 71 ~Application( );
ubhat 0:6cc76d70e2a1 72
ubhat 0:6cc76d70e2a1 73 /*!
ubhat 0:6cc76d70e2a1 74 * \brief Call application type and append to application buffer
ubhat 0:6cc76d70e2a1 75 *
ubhat 0:6cc76d70e2a1 76 * \param [IN] AppType application type: GPS, Battery, Temp etc.
ubhat 0:6cc76d70e2a1 77 */
ubhat 0:6cc76d70e2a1 78 void ApplicationCall( eAppType AppType );
ubhat 0:6cc76d70e2a1 79
ubhat 0:6cc76d70e2a1 80 /*!
ubhat 0:6cc76d70e2a1 81 * \brief Append data to the TX buffer
ubhat 0:6cc76d70e2a1 82 *
ubhat 0:6cc76d70e2a1 83 * \param [IN] pData pointer to the data to be appended to TX buffer
ubhat 0:6cc76d70e2a1 84 * \param [IN] Len lenght of the data to be appended to TX buffer
ubhat 0:6cc76d70e2a1 85 */
ubhat 0:6cc76d70e2a1 86 void ApplicationAppendData( uint8_t *pData, uint8_t len );
ubhat 0:6cc76d70e2a1 87
ubhat 0:6cc76d70e2a1 88 /*!
ubhat 0:6cc76d70e2a1 89 * \brief Point the pointer corresponding to the TX buffer to specified index
ubhat 0:6cc76d70e2a1 90 *
ubhat 0:6cc76d70e2a1 91 * \param [IN] ptrPos index to where to point to in the TX buffer
ubhat 0:6cc76d70e2a1 92 */
ubhat 0:6cc76d70e2a1 93 void ApplicationPtrPos( uint8_t ptrPos );
ubhat 0:6cc76d70e2a1 94
ubhat 0:6cc76d70e2a1 95 private:
ubhat 0:6cc76d70e2a1 96 /*!
ubhat 0:6cc76d70e2a1 97 * Index to the application buffer
ubhat 0:6cc76d70e2a1 98 */
ubhat 0:6cc76d70e2a1 99 uint8_t BuffPtr;
ubhat 0:6cc76d70e2a1 100 /*!
ubhat 0:6cc76d70e2a1 101 * Application buffer address pointer
ubhat 0:6cc76d70e2a1 102 */
ubhat 0:6cc76d70e2a1 103 uint8_t *BuffAddr;
ubhat 0:6cc76d70e2a1 104 };
ubhat 0:6cc76d70e2a1 105
ubhat 0:6cc76d70e2a1 106 class TimerLed
ubhat 0:6cc76d70e2a1 107 {
ubhat 0:6cc76d70e2a1 108 public:
ubhat 0:6cc76d70e2a1 109 TimerEvent_t LedTimer;
ubhat 0:6cc76d70e2a1 110 TimerLed( eLedType );
ubhat 0:6cc76d70e2a1 111 ~TimerLed( );
ubhat 0:6cc76d70e2a1 112 };
ubhat 0:6cc76d70e2a1 113
ubhat 0:6cc76d70e2a1 114 extern TimerLed RedLedTimer;
ubhat 0:6cc76d70e2a1 115
ubhat 0:6cc76d70e2a1 116 extern TimerLed YellowLedTimer;
ubhat 0:6cc76d70e2a1 117
ubhat 0:6cc76d70e2a1 118 extern TimerLed GreenLedTimer;
ubhat 0:6cc76d70e2a1 119
ubhat 0:6cc76d70e2a1 120 extern Application LoRaApp;
ubhat 0:6cc76d70e2a1 121
ubhat 0:6cc76d70e2a1 122 extern bool AppLed;
ubhat 0:6cc76d70e2a1 123
ubhat 0:6cc76d70e2a1 124 extern bool VerticalStatus;
ubhat 0:6cc76d70e2a1 125
ubhat 0:6cc76d70e2a1 126 #ifdef USE_CAYENNE_LPP
ubhat 0:6cc76d70e2a1 127 extern uint8_t maxLPPsize[4];
ubhat 0:6cc76d70e2a1 128 #endif
ubhat 0:6cc76d70e2a1 129
ubhat 0:6cc76d70e2a1 130 void CheckOrientation( void );
ubhat 0:6cc76d70e2a1 131
terence304 2:5859f5872d6c 132 #endif // __APPLICATION_H__