Terence Huang / Canada-SX1272-LoRaWAN-Bootcamp-rotary

add rotary

Dependencies:   X_NUCLEO_IKS01A1 LoRaWAN-lib SX1272Lib mbed

Fork of Canada-SX1272-LoRaWAN-Bootcamp by Uttam Bhat

LoRaWAN-SX1272-Mbed-Shield

Overview

LoRaWAN-SX1272-Mbed-Shield application demo is a LoRaWAN Class-A device example project using LoRaWAN-lib and SX1272Lib libraries that send out sensors data.

Prerequisites

1. NUCLEO_L152RE board.
2. SX1272-mbed-shield board.
3. X-NUCLEO-IKS01A1.
4. Grove Red LED.
5. Grove Button.
6. Grove Rotary Angle Sensor.
7. mbed online compiler.
8. Tera Term.

Hardware Configuration

Application 8, 9, 11
1. Connect NUCLEO_L152RE with X-NUCLEO-IKS01A1.
2. On top of X-NUCLEO-IKS01A1, connect SX1272-mbed-shield.
Application 13
1. Connect NUCLEO_L152RE with SX1272-mbed-shield.
2. Connect Grove Red LED with DIO_D6 port on SX1272-mbed-shield.
3. Connect Grove Button with DIO_D8 port on SX1272-mbed-shield.
4. Connect Grove Rotary Angle Sensor with ANA_A1 port SX1272-mbed-shield.

Software Configuration

The end-device must be configured with the following parameters:

  • Commissioning.h
    • Activation Type: OTA or ABP
      • OTA: #define OVER_THE_AIR_ACTIVATION 1
    • Network Type: Public or Private
      • Public: #define LORAWAN_PUBLIC_NETWORK true
    • LORAWAN_DEVICE_EUI (8 Bytes) : Fist 3 Bytes is the Organizationally Unique Identifier (OUI) followed by 5 bytes of unique ID. If not defined by user, then the firmware automatically assigns one to the end-device. (For OTA)
      • #define IEEE_OUI 0x00, 0x00, 0x00
      • #define LORAWAN_DEVICE_EUI { IEEE_OUI, 0x00, 0x00, 0x00, 0x00, 0x00 }
    • LORAWAN_APPLICATION_EUI (8 Bytes) (For OTA)
      • #define LORAWAN_APPLICATION_EUI { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }
    • LORAWAN_APPLICATION_KEY (16 Bytes) (For OTA)
      • #define LORAWAN_APPLICATION_KEY { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, 0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff }
    • LORAWAN_DEVICE_ADDRESS (For ABP)
      • #define LORAWAN_DEVICE_ADDRESS ( uint32_t )0x0
    • LORAWAN_NWKSKEY (For ABP)
      • #define LORAWAN_NWKSKEY { 0x2B, 0x7E, 0x15, 0x16, 0x28, 0xAE, 0xD2, 0xA6, 0xAB, 0xF7, 0x15, 0x88, 0x09, 0xCF, 0x4F, 0x3C }
    • LORAWAN_APPSKEY (For ABP)
      • #define LORAWAN_APPSKEY { 0x2B, 0x7E, 0x15, 0x16, 0x28, 0xAE, 0xD2, 0xA6, 0xAB, 0xF7, 0x15, 0x88, 0x09, 0xCF, 0x4F, 0x3C }
  • Configure.h
    • Communication Type: Hybrid or FHSS
      • Hybrid: #define USE_BAND_915_HYBRID
    • Join request Period:
      • 5 sec: #define OVER_THE_AIR_ACTIVATION_DUTYCYCLE 5000000 value in us
    • TX Period:
      • 5 sec: #define APP_TX_DUTYCYCLE 5000000 value in us
    • Uplink message: Confirmed or Unconfirmed
      • Confirmed: #define LORAWAN_CONFIRMED_MSG_ON 1
    • ADR(Adaptive Data Rate): ON or OFF
      • OFF: #define LORAWAN_ADR_ON 0
    • Default data rate: DR_0 or DR_1 or DR_2 or DR_3 or DR_4
      • DR_0: #define LORAWAN_DEFAULT_DATARATE DR_0
    • Application Type: 8 (IKS01A1) or 9 (IKS01A1+Cayenne) or 11 (Push Button) or 13 (rotary+Cayenne)
      • 9: #define LORAWAN_APP_PORT 9
    • Tx Power: 10 to 30
      • 20 dBm: #define LORAWAN_TX_POWER TX_POWER_20_DBM

Serial Terminal Display

  • Use Tera Term to see the sending message (baud rate: 115200):
    • button = 0 (if not press) button = 1 (if pressed)
    • rotary = 0 ~ 300

1800

system/timer.h@17:a822234a2299, 2018-02-10 (annotated)

Committer:
terence304
Date:
Sat Feb 10 02:37:58 2018 +0000
Revision:
17:a822234a2299
Parent:
0:6cc76d70e2a1 
update commissioning parameters

Who changed what in which revision?

UserRevisionLine numberNew contents of line
ubhat 0:6cc76d70e2a1 1 /*
ubhat 0:6cc76d70e2a1 2 / _____) _ | |
ubhat 0:6cc76d70e2a1 3 ( (____ _____ ____ _| |_ _____ ____| |__
ubhat 0:6cc76d70e2a1 4 \____ \| ___ | (_ _) ___ |/ ___) _ \
ubhat 0:6cc76d70e2a1 5 _____) ) ____| | | || |_| ____( (___| | | |
ubhat 0:6cc76d70e2a1 6 (______/|_____)_|_|_| \__)_____)\____)_| |_|
ubhat 0:6cc76d70e2a1 7 (C)2013 Semtech
ubhat 0:6cc76d70e2a1 8
ubhat 0:6cc76d70e2a1 9 Description: Timer objects and scheduling management
ubhat 0:6cc76d70e2a1 10
ubhat 0:6cc76d70e2a1 11 License: Revised BSD License, see LICENSE.TXT file include in the project
ubhat 0:6cc76d70e2a1 12
ubhat 0:6cc76d70e2a1 13 Maintainer: Miguel Luis and Gregory Cristian
ubhat 0:6cc76d70e2a1 14 */
ubhat 0:6cc76d70e2a1 15 #ifndef __TIMER_H__
ubhat 0:6cc76d70e2a1 16 #define __TIMER_H__
ubhat 0:6cc76d70e2a1 17
ubhat 0:6cc76d70e2a1 18 #include "mbed.h"
ubhat 0:6cc76d70e2a1 19
ubhat 0:6cc76d70e2a1 20 /*!
ubhat 0:6cc76d70e2a1 21 * \brief Timer object description
ubhat 0:6cc76d70e2a1 22 */
ubhat 0:6cc76d70e2a1 23 typedef struct TimerEvent_s
ubhat 0:6cc76d70e2a1 24 {
ubhat 0:6cc76d70e2a1 25 uint32_t value;
ubhat 0:6cc76d70e2a1 26 void ( *Callback )( void );
ubhat 0:6cc76d70e2a1 27 Ticker Timer;
ubhat 0:6cc76d70e2a1 28 }TimerEvent_t;
ubhat 0:6cc76d70e2a1 29
ubhat 0:6cc76d70e2a1 30 /*!
ubhat 0:6cc76d70e2a1 31 * \brief Timer time variable definition
ubhat 0:6cc76d70e2a1 32 */
ubhat 0:6cc76d70e2a1 33 #ifndef TimerTime_t
ubhat 0:6cc76d70e2a1 34 typedef uint32_t TimerTime_t;
ubhat 0:6cc76d70e2a1 35 #endif
ubhat 0:6cc76d70e2a1 36
ubhat 0:6cc76d70e2a1 37 /*!
ubhat 0:6cc76d70e2a1 38 * \brief Inializes the timer used to get current time.
ubhat 0:6cc76d70e2a1 39 *
ubhat 0:6cc76d70e2a1 40 * \remark Current time corresponds to the time since system startup
ubhat 0:6cc76d70e2a1 41 */
ubhat 0:6cc76d70e2a1 42 void TimerTimeCounterInit( void );
ubhat 0:6cc76d70e2a1 43
ubhat 0:6cc76d70e2a1 44 /*!
ubhat 0:6cc76d70e2a1 45 * \brief Initializes the timer object
ubhat 0:6cc76d70e2a1 46 *
ubhat 0:6cc76d70e2a1 47 * \remark TimerSetValue function must be called before starting the timer.
ubhat 0:6cc76d70e2a1 48 * this function initializes timestamp and reload value at 0.
ubhat 0:6cc76d70e2a1 49 *
ubhat 0:6cc76d70e2a1 50 * \param [IN] obj Structure containing the timer object parameters
ubhat 0:6cc76d70e2a1 51 * \param [IN] callback Function callback called at the end of the timeout
ubhat 0:6cc76d70e2a1 52 */
ubhat 0:6cc76d70e2a1 53 void TimerInit( TimerEvent_t *obj, void ( *callback )( void ) );
ubhat 0:6cc76d70e2a1 54
ubhat 0:6cc76d70e2a1 55 /*!
ubhat 0:6cc76d70e2a1 56 * \brief Starts and adds the timer object to the list of timer events
ubhat 0:6cc76d70e2a1 57 *
ubhat 0:6cc76d70e2a1 58 * \param [IN] obj Structure containing the timer object parameters
ubhat 0:6cc76d70e2a1 59 */
ubhat 0:6cc76d70e2a1 60 void TimerStart( TimerEvent_t *obj );
ubhat 0:6cc76d70e2a1 61
ubhat 0:6cc76d70e2a1 62 /*!
ubhat 0:6cc76d70e2a1 63 * \brief Stops and removes the timer object from the list of timer events
ubhat 0:6cc76d70e2a1 64 *
ubhat 0:6cc76d70e2a1 65 * \param [IN] obj Structure containing the timer object parameters
ubhat 0:6cc76d70e2a1 66 */
ubhat 0:6cc76d70e2a1 67 void TimerStop( TimerEvent_t *obj );
ubhat 0:6cc76d70e2a1 68
ubhat 0:6cc76d70e2a1 69 /*!
ubhat 0:6cc76d70e2a1 70 * \brief Resets the timer object
ubhat 0:6cc76d70e2a1 71 *
ubhat 0:6cc76d70e2a1 72 * \param [IN] obj Structure containing the timer object parameters
ubhat 0:6cc76d70e2a1 73 */
ubhat 0:6cc76d70e2a1 74 void TimerReset( TimerEvent_t *obj );
ubhat 0:6cc76d70e2a1 75
ubhat 0:6cc76d70e2a1 76 /*!
ubhat 0:6cc76d70e2a1 77 * \brief Set timer new timeout value
ubhat 0:6cc76d70e2a1 78 *
ubhat 0:6cc76d70e2a1 79 * \param [IN] obj Structure containing the timer object parameters
ubhat 0:6cc76d70e2a1 80 * \param [IN] value New timer timeout value
ubhat 0:6cc76d70e2a1 81 */
ubhat 0:6cc76d70e2a1 82 void TimerSetValue( TimerEvent_t *obj, uint32_t value );
ubhat 0:6cc76d70e2a1 83
ubhat 0:6cc76d70e2a1 84 /*!
ubhat 0:6cc76d70e2a1 85 * \brief Read the current time
ubhat 0:6cc76d70e2a1 86 *
ubhat 0:6cc76d70e2a1 87 * \retval time returns current time
ubhat 0:6cc76d70e2a1 88 */
ubhat 0:6cc76d70e2a1 89 TimerTime_t TimerGetCurrentTime( void );
ubhat 0:6cc76d70e2a1 90
ubhat 0:6cc76d70e2a1 91 /*!
ubhat 0:6cc76d70e2a1 92 * \brief Return the Time elapsed since a fix moment in Time
ubhat 0:6cc76d70e2a1 93 *
ubhat 0:6cc76d70e2a1 94 * \param [IN] savedTime fix moment in Time
ubhat 0:6cc76d70e2a1 95 * \retval time returns elapsed time
ubhat 0:6cc76d70e2a1 96 */
ubhat 0:6cc76d70e2a1 97 TimerTime_t TimerGetElapsedTime( TimerTime_t savedTime );
ubhat 0:6cc76d70e2a1 98
ubhat 0:6cc76d70e2a1 99 /*!
ubhat 0:6cc76d70e2a1 100 * \brief Return the Time elapsed since a fix moment in Time
ubhat 0:6cc76d70e2a1 101 *
ubhat 0:6cc76d70e2a1 102 * \param [IN] eventInFuture fix moment in the future
ubhat 0:6cc76d70e2a1 103 * \retval time returns difference between now and future event
ubhat 0:6cc76d70e2a1 104 */
ubhat 0:6cc76d70e2a1 105 TimerTime_t TimerGetFutureTime( TimerTime_t eventInFuture );
ubhat 0:6cc76d70e2a1 106
ubhat 0:6cc76d70e2a1 107 #endif // __TIMER_H__