Terence Huang / Canada-SX1272-LoRaWAN-Bootcamp-rotary

add rotary

Dependencies:   X_NUCLEO_IKS01A1 LoRaWAN-lib SX1272Lib mbed

Fork of Canada-SX1272-LoRaWAN-Bootcamp by Uttam Bhat

LoRaWAN-SX1272-Mbed-Shield

Overview

LoRaWAN-SX1272-Mbed-Shield application demo is a LoRaWAN Class-A device example project using LoRaWAN-lib and SX1272Lib libraries that send out sensors data.

Prerequisites

1. NUCLEO_L152RE board.
2. SX1272-mbed-shield board.
3. X-NUCLEO-IKS01A1.
4. Grove Red LED.
5. Grove Button.
6. Grove Rotary Angle Sensor.
7. mbed online compiler.
8. Tera Term.

Hardware Configuration

Application 8, 9, 11
1. Connect NUCLEO_L152RE with X-NUCLEO-IKS01A1.
2. On top of X-NUCLEO-IKS01A1, connect SX1272-mbed-shield.
Application 13
1. Connect NUCLEO_L152RE with SX1272-mbed-shield.
2. Connect Grove Red LED with DIO_D6 port on SX1272-mbed-shield.
3. Connect Grove Button with DIO_D8 port on SX1272-mbed-shield.
4. Connect Grove Rotary Angle Sensor with ANA_A1 port SX1272-mbed-shield.

Software Configuration

The end-device must be configured with the following parameters:

  • Commissioning.h
    • Activation Type: OTA or ABP
      • OTA: #define OVER_THE_AIR_ACTIVATION 1
    • Network Type: Public or Private
      • Public: #define LORAWAN_PUBLIC_NETWORK true
    • LORAWAN_DEVICE_EUI (8 Bytes) : Fist 3 Bytes is the Organizationally Unique Identifier (OUI) followed by 5 bytes of unique ID. If not defined by user, then the firmware automatically assigns one to the end-device. (For OTA)
      • #define IEEE_OUI 0x00, 0x00, 0x00
      • #define LORAWAN_DEVICE_EUI { IEEE_OUI, 0x00, 0x00, 0x00, 0x00, 0x00 }
    • LORAWAN_APPLICATION_EUI (8 Bytes) (For OTA)
      • #define LORAWAN_APPLICATION_EUI { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }
    • LORAWAN_APPLICATION_KEY (16 Bytes) (For OTA)
      • #define LORAWAN_APPLICATION_KEY { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, 0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff }
    • LORAWAN_DEVICE_ADDRESS (For ABP)
      • #define LORAWAN_DEVICE_ADDRESS ( uint32_t )0x0
    • LORAWAN_NWKSKEY (For ABP)
      • #define LORAWAN_NWKSKEY { 0x2B, 0x7E, 0x15, 0x16, 0x28, 0xAE, 0xD2, 0xA6, 0xAB, 0xF7, 0x15, 0x88, 0x09, 0xCF, 0x4F, 0x3C }
    • LORAWAN_APPSKEY (For ABP)
      • #define LORAWAN_APPSKEY { 0x2B, 0x7E, 0x15, 0x16, 0x28, 0xAE, 0xD2, 0xA6, 0xAB, 0xF7, 0x15, 0x88, 0x09, 0xCF, 0x4F, 0x3C }
  • Configure.h
    • Communication Type: Hybrid or FHSS
      • Hybrid: #define USE_BAND_915_HYBRID
    • Join request Period:
      • 5 sec: #define OVER_THE_AIR_ACTIVATION_DUTYCYCLE 5000000 value in us
    • TX Period:
      • 5 sec: #define APP_TX_DUTYCYCLE 5000000 value in us
    • Uplink message: Confirmed or Unconfirmed
      • Confirmed: #define LORAWAN_CONFIRMED_MSG_ON 1
    • ADR(Adaptive Data Rate): ON or OFF
      • OFF: #define LORAWAN_ADR_ON 0
    • Default data rate: DR_0 or DR_1 or DR_2 or DR_3 or DR_4
      • DR_0: #define LORAWAN_DEFAULT_DATARATE DR_0
    • Application Type: 8 (IKS01A1) or 9 (IKS01A1+Cayenne) or 11 (Push Button) or 13 (rotary+Cayenne)
      • 9: #define LORAWAN_APP_PORT 9
    • Tx Power: 10 to 30
      • 20 dBm: #define LORAWAN_TX_POWER TX_POWER_20_DBM

Serial Terminal Display

  • Use Tera Term to see the sending message (baud rate: 115200):
    • button = 0 (if not press) button = 1 (if pressed)
    • rotary = 0 ~ 300

1800

app/SerialDisplay.cpp@17:a822234a2299, 2018-02-10 (annotated)

Committer:
terence304
Date:
Sat Feb 10 02:37:58 2018 +0000
Revision:
17:a822234a2299
Parent:
5:e21b38612c21 
update commissioning parameters

Who changed what in which revision?

UserRevisionLine numberNew contents of line
ubhat 0:6cc76d70e2a1 1 /*
ubhat 0:6cc76d70e2a1 2 / _____) _ | |
ubhat 0:6cc76d70e2a1 3 ( (____ _____ ____ _| |_ _____ ____| |__
ubhat 0:6cc76d70e2a1 4 \____ \| ___ | (_ _) ___ |/ ___) _ \
ubhat 0:6cc76d70e2a1 5 _____) ) ____| | | || |_| ____( (___| | | |
ubhat 0:6cc76d70e2a1 6 (______/|_____)_|_|_| \__)_____)\____)_| |_|
ubhat 0:6cc76d70e2a1 7 (C)2015 Semtech
ubhat 0:6cc76d70e2a1 8
ubhat 0:6cc76d70e2a1 9 Description: VT100 serial display management
ubhat 0:6cc76d70e2a1 10
ubhat 0:6cc76d70e2a1 11 License: Revised BSD License, see LICENSE.TXT file include in the project
ubhat 0:6cc76d70e2a1 12
ubhat 0:6cc76d70e2a1 13 Maintainer: Miguel Luis and Gregory Cristian
ubhat 0:6cc76d70e2a1 14 */
ubhat 0:6cc76d70e2a1 15
ubhat 0:6cc76d70e2a1 16 #include "SerialDisplay.h"
ubhat 0:6cc76d70e2a1 17
ubhat 0:6cc76d70e2a1 18 VT100 vt( USBTX, USBRX );
ubhat 0:6cc76d70e2a1 19
ubhat 0:6cc76d70e2a1 20 void SerialDisplayJoinUpdate( void )
ubhat 0:6cc76d70e2a1 21 {
ubhat 0:6cc76d70e2a1 22 printf( "###### ===== JOINING ==== ######\r\n" );
ubhat 0:6cc76d70e2a1 23
ubhat 0:6cc76d70e2a1 24 DisplayNetworkParam( );
ubhat 0:6cc76d70e2a1 25
ubhat 0:6cc76d70e2a1 26 printf( "\r\n" );
ubhat 0:6cc76d70e2a1 27 }
ubhat 0:6cc76d70e2a1 28
ubhat 0:6cc76d70e2a1 29 void SerialDisplayTxUpdate(void)
ubhat 0:6cc76d70e2a1 30 {
ubhat 0:6cc76d70e2a1 31 printf( "###### ===== UPLINK FRAME %d ==== ######\r\n", LoRaMacUplinkStatus.UplinkCounter );
ubhat 0:6cc76d70e2a1 32
ubhat 0:6cc76d70e2a1 33 DisplayNetworkParam( );
ubhat 0:6cc76d70e2a1 34
ubhat 0:6cc76d70e2a1 35 printf( "TX PORT: %d\r\n", LoRaMacUplinkStatus.Port );
ubhat 0:6cc76d70e2a1 36
ubhat 0:6cc76d70e2a1 37 if( LoRaMacUplinkStatus.BufferSize != 0 )
ubhat 0:6cc76d70e2a1 38 {
ubhat 0:6cc76d70e2a1 39 printf( "TX DATA: " );
ubhat 0:6cc76d70e2a1 40 if( LoRaMacUplinkStatus.Type == MCPS_CONFIRMED )
ubhat 0:6cc76d70e2a1 41 {
ubhat 0:6cc76d70e2a1 42 printf( "CONFIRMED\r\n" );
ubhat 0:6cc76d70e2a1 43 }
ubhat 0:6cc76d70e2a1 44 else
ubhat 0:6cc76d70e2a1 45 {
ubhat 0:6cc76d70e2a1 46 printf( "UNCONFIRMED\r\n" );
ubhat 0:6cc76d70e2a1 47 }
ubhat 0:6cc76d70e2a1 48 SerialDisplayHex( LoRaMacUplinkStatus.Buffer, LoRaMacUplinkStatus.BufferSize );
ubhat 0:6cc76d70e2a1 49 }
ubhat 0:6cc76d70e2a1 50
ubhat 0:6cc76d70e2a1 51 printf( "DATA RATE: DR%d\r\n", LoRaMacUplinkStatus.Datarate );
ubhat 0:6cc76d70e2a1 52
ubhat 0:6cc76d70e2a1 53 printf( "TX POWER: %d dBm\r\n", 30 - ( LoRaMacUplinkStatus.TxPower << 1 ) );
ubhat 0:6cc76d70e2a1 54
terence 5:e21b38612c21 55 printf( "BATTERY: %d V\r\n",
terence 5:e21b38612c21 56 100 + (BoardGetBatteryLevel() - 0xFE) * 100 / 254 );
ubhat 0:6cc76d70e2a1 57
ubhat 0:6cc76d70e2a1 58 printf( "\r\n");
ubhat 0:6cc76d70e2a1 59 }
ubhat 0:6cc76d70e2a1 60
ubhat 0:6cc76d70e2a1 61 void SerialDisplayRxUpdate( void )
ubhat 0:6cc76d70e2a1 62 {
ubhat 0:6cc76d70e2a1 63 printf( "###### ===== DOWNLINK FRAME %d ==== ######\r\n", LoRaMacDownlinkStatus.DownlinkCounter );
ubhat 0:6cc76d70e2a1 64
ubhat 0:6cc76d70e2a1 65 printf( "RX WINDOW: %d\r\n", LoRaMacDownlinkStatus.RxSlot + 1 );
ubhat 0:6cc76d70e2a1 66
ubhat 0:6cc76d70e2a1 67 printf( "RX PORT: %d\r\n", LoRaMacDownlinkStatus.Port );
ubhat 0:6cc76d70e2a1 68
ubhat 0:6cc76d70e2a1 69 if( LoRaMacDownlinkStatus.BufferSize != 0 )
ubhat 0:6cc76d70e2a1 70 {
ubhat 0:6cc76d70e2a1 71 printf( "RX DATA: \r\n" );
ubhat 0:6cc76d70e2a1 72 SerialDisplayHex( LoRaMacDownlinkStatus.Buffer, LoRaMacDownlinkStatus.BufferSize );
ubhat 0:6cc76d70e2a1 73 }
ubhat 0:6cc76d70e2a1 74
ubhat 0:6cc76d70e2a1 75 printf( "RX RSSI: %d\r\n", LoRaMacDownlinkStatus.Rssi );
ubhat 0:6cc76d70e2a1 76
ubhat 0:6cc76d70e2a1 77 printf( "RX SNR: %d\r\n", LoRaMacDownlinkStatus.Snr );
ubhat 0:6cc76d70e2a1 78
ubhat 0:6cc76d70e2a1 79 printf( "\r\n" );
ubhat 0:6cc76d70e2a1 80 }
ubhat 0:6cc76d70e2a1 81
ubhat 0:6cc76d70e2a1 82 void SerialDisplayHex( uint8_t *pData, uint8_t len )
ubhat 0:6cc76d70e2a1 83 {
ubhat 0:6cc76d70e2a1 84 int i;
ubhat 0:6cc76d70e2a1 85 bool newline = 0;
ubhat 0:6cc76d70e2a1 86
ubhat 0:6cc76d70e2a1 87 for( i = 0; i < len; i++ )
ubhat 0:6cc76d70e2a1 88 {
ubhat 0:6cc76d70e2a1 89 if( newline != 0 )
ubhat 0:6cc76d70e2a1 90 {
ubhat 0:6cc76d70e2a1 91 printf( "\r\n" );
ubhat 0:6cc76d70e2a1 92 newline = 0;
ubhat 0:6cc76d70e2a1 93 }
ubhat 0:6cc76d70e2a1 94
ubhat 0:6cc76d70e2a1 95 printf( "%02X ", pData[i] );
ubhat 0:6cc76d70e2a1 96
ubhat 0:6cc76d70e2a1 97 if( ( ( i + 1 ) % 16 ) == 0 )
ubhat 0:6cc76d70e2a1 98 {
ubhat 0:6cc76d70e2a1 99 newline = 1;
ubhat 0:6cc76d70e2a1 100 }
ubhat 0:6cc76d70e2a1 101 }
ubhat 0:6cc76d70e2a1 102 printf( "\r\n" );
ubhat 0:6cc76d70e2a1 103 }
ubhat 0:6cc76d70e2a1 104
ubhat 0:6cc76d70e2a1 105 void SerialAcclMetrDisplay( uint8_t statusReg )
ubhat 0:6cc76d70e2a1 106 {
ubhat 0:6cc76d70e2a1 107 printf( "===== DEVICE ORIENTATION ====\r\n" );
ubhat 0:6cc76d70e2a1 108 if( ( statusReg & 0x40 ) != 0 )
ubhat 0:6cc76d70e2a1 109 {
ubhat 0:6cc76d70e2a1 110 printf( "HORIZONTAL + " );
ubhat 0:6cc76d70e2a1 111 if( ( statusReg & 0x01 ) != 0 )
ubhat 0:6cc76d70e2a1 112 {
ubhat 0:6cc76d70e2a1 113 printf( "FACE DOWN" );
ubhat 0:6cc76d70e2a1 114 }
ubhat 0:6cc76d70e2a1 115 else
ubhat 0:6cc76d70e2a1 116 {
ubhat 0:6cc76d70e2a1 117 printf( "FACE UP" );
ubhat 0:6cc76d70e2a1 118 }
ubhat 0:6cc76d70e2a1 119 }
ubhat 0:6cc76d70e2a1 120 else
ubhat 0:6cc76d70e2a1 121 {
ubhat 0:6cc76d70e2a1 122 printf( "VERTICAL" );
ubhat 0:6cc76d70e2a1 123 }
ubhat 0:6cc76d70e2a1 124 printf( "\r\n\r\n" );
ubhat 0:6cc76d70e2a1 125 }
ubhat 0:6cc76d70e2a1 126
ubhat 0:6cc76d70e2a1 127 void DisplayNetworkParam( void )
ubhat 0:6cc76d70e2a1 128 {
ubhat 0:6cc76d70e2a1 129 #if( OVER_THE_AIR_ACTIVATION != 0 )
ubhat 0:6cc76d70e2a1 130
ubhat 0:6cc76d70e2a1 131 printf( "DEVEUI: " );
ubhat 0:6cc76d70e2a1 132 SerialDisplayHex( DevEui, 8 );
ubhat 0:6cc76d70e2a1 133
ubhat 0:6cc76d70e2a1 134 printf( "APPEUI: " );
ubhat 0:6cc76d70e2a1 135 SerialDisplayHex( AppEui, 8 );
ubhat 0:6cc76d70e2a1 136
ubhat 0:6cc76d70e2a1 137 printf( "APPKEY: " );
ubhat 0:6cc76d70e2a1 138 SerialDisplayHex( AppKey, 16 );
ubhat 0:6cc76d70e2a1 139
ubhat 0:6cc76d70e2a1 140 #else
ubhat 0:6cc76d70e2a1 141
ubhat 0:6cc76d70e2a1 142 printf( "DEVADDR: " );
ubhat 0:6cc76d70e2a1 143
ubhat 0:6cc76d70e2a1 144 uint8_t *pData = ( uint8_t* )&DevAddr;
ubhat 0:6cc76d70e2a1 145 for( int32_t i = 3; i >= 0; i-- )
ubhat 0:6cc76d70e2a1 146 {
ubhat 0:6cc76d70e2a1 147 printf( "%02X ", pData[i] );
ubhat 0:6cc76d70e2a1 148 }
ubhat 0:6cc76d70e2a1 149 printf( "\r\n" );
ubhat 0:6cc76d70e2a1 150
ubhat 0:6cc76d70e2a1 151 printf( "NWKSKEY: " );
ubhat 0:6cc76d70e2a1 152 SerialDisplayHex( NwkSKey, 16 );
ubhat 0:6cc76d70e2a1 153
ubhat 0:6cc76d70e2a1 154 printf( "APPSKEY: " );
ubhat 0:6cc76d70e2a1 155 SerialDisplayHex( AppSKey, 16 );
ubhat 0:6cc76d70e2a1 156
ubhat 0:6cc76d70e2a1 157 #endif
terence 5:e21b38612c21 158 }