add rotary
Dependencies: X_NUCLEO_IKS01A1 LoRaWAN-lib SX1272Lib mbed
Fork of Canada-SX1272-LoRaWAN-Bootcamp by
LoRaWAN-SX1272-Mbed-Shield
Overview
LoRaWAN-SX1272-Mbed-Shield application demo is a LoRaWAN Class-A device example project using LoRaWAN-lib and SX1272Lib libraries that send out sensors data.
Prerequisites
1. NUCLEO_L152RE board.
2. SX1272-mbed-shield board.
3. X-NUCLEO-IKS01A1.
4. Grove Red LED.
5. Grove Button.
6. Grove Rotary Angle Sensor.
7. mbed online compiler.
8. Tera Term.
Hardware Configuration
Application 8, 9, 11
1. Connect NUCLEO_L152RE with X-NUCLEO-IKS01A1.
2. On top of X-NUCLEO-IKS01A1, connect SX1272-mbed-shield.
Application 13
1. Connect NUCLEO_L152RE with SX1272-mbed-shield.
2. Connect Grove Red LED with DIO_D6 port on SX1272-mbed-shield.
3. Connect Grove Button with DIO_D8 port on SX1272-mbed-shield.
4. Connect Grove Rotary Angle Sensor with ANA_A1 port SX1272-mbed-shield.
Software Configuration
The end-device must be configured with the following parameters:
- Commissioning.h
- Activation Type: OTA or ABP
- OTA: #define OVER_THE_AIR_ACTIVATION 1
- Network Type: Public or Private
- Public: #define LORAWAN_PUBLIC_NETWORK true
- LORAWAN_DEVICE_EUI (8 Bytes) : Fist 3 Bytes is the Organizationally Unique Identifier (OUI) followed by 5 bytes of unique ID. If not defined by user, then the firmware automatically assigns one to the end-device. (For OTA)
- #define IEEE_OUI 0x00, 0x00, 0x00
- #define LORAWAN_DEVICE_EUI { IEEE_OUI, 0x00, 0x00, 0x00, 0x00, 0x00 }
- #define IEEE_OUI 0x00, 0x00, 0x00
- LORAWAN_APPLICATION_EUI (8 Bytes) (For OTA)
- #define LORAWAN_APPLICATION_EUI { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }
- LORAWAN_APPLICATION_KEY (16 Bytes) (For OTA)
- #define LORAWAN_APPLICATION_KEY { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, 0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff }
- #define LORAWAN_APPLICATION_KEY { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, 0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff }
- LORAWAN_DEVICE_ADDRESS (For ABP)
- #define LORAWAN_DEVICE_ADDRESS ( uint32_t )0x0
- LORAWAN_NWKSKEY (For ABP)
- #define LORAWAN_NWKSKEY { 0x2B, 0x7E, 0x15, 0x16, 0x28, 0xAE, 0xD2, 0xA6, 0xAB, 0xF7, 0x15, 0x88, 0x09, 0xCF, 0x4F, 0x3C }
- LORAWAN_APPSKEY (For ABP)
- #define LORAWAN_APPSKEY { 0x2B, 0x7E, 0x15, 0x16, 0x28, 0xAE, 0xD2, 0xA6, 0xAB, 0xF7, 0x15, 0x88, 0x09, 0xCF, 0x4F, 0x3C }
- Activation Type: OTA or ABP
- Configure.h
- Communication Type: Hybrid or FHSS
- Hybrid: #define USE_BAND_915_HYBRID
- Join request Period:
- 5 sec: #define OVER_THE_AIR_ACTIVATION_DUTYCYCLE 5000000 value in us
- TX Period:
- 5 sec: #define APP_TX_DUTYCYCLE 5000000 value in us
- Uplink message: Confirmed or Unconfirmed
- Confirmed: #define LORAWAN_CONFIRMED_MSG_ON 1
- ADR(Adaptive Data Rate): ON or OFF
- OFF: #define LORAWAN_ADR_ON 0
- Default data rate: DR_0 or DR_1 or DR_2 or DR_3 or DR_4
- DR_0: #define LORAWAN_DEFAULT_DATARATE DR_0
- Application Type: 8 (IKS01A1) or 9 (IKS01A1+Cayenne) or 11 (Push Button) or 13 (rotary+Cayenne)
- 9: #define LORAWAN_APP_PORT 9
- Tx Power: 10 to 30
- 20 dBm: #define LORAWAN_TX_POWER TX_POWER_20_DBM
- Communication Type: Hybrid or FHSS
Serial Terminal Display
- Use Tera Term to see the sending message (baud rate: 115200):
- button = 0 (if not press) button = 1 (if pressed)
- rotary = 0 ~ 300
- button = 0 (if not press) button = 1 (if pressed)
app/ComplianceTest.cpp@17:a822234a2299, 2018-02-10 (annotated)
- Committer:
- terence304
- Date:
- Sat Feb 10 02:37:58 2018 +0000
- Revision:
- 17:a822234a2299
- Parent:
- 0:6cc76d70e2a1
update commissioning parameters
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
ubhat | 0:6cc76d70e2a1 | 1 | /* |
ubhat | 0:6cc76d70e2a1 | 2 | / _____) _ | | |
ubhat | 0:6cc76d70e2a1 | 3 | ( (____ _____ ____ _| |_ _____ ____| |__ |
ubhat | 0:6cc76d70e2a1 | 4 | \____ \| ___ | (_ _) ___ |/ ___) _ \ |
ubhat | 0:6cc76d70e2a1 | 5 | _____) ) ____| | | || |_| ____( (___| | | | |
ubhat | 0:6cc76d70e2a1 | 6 | (______/|_____)_|_|_| \__)_____)\____)_| |_| |
ubhat | 0:6cc76d70e2a1 | 7 | (C)2015 Semtech |
ubhat | 0:6cc76d70e2a1 | 8 | |
ubhat | 0:6cc76d70e2a1 | 9 | Description: Compliance Test for LoRaWAN End-Device |
ubhat | 0:6cc76d70e2a1 | 10 | |
ubhat | 0:6cc76d70e2a1 | 11 | License: Revised BSD License, see LICENSE.TXT file include in the project |
ubhat | 0:6cc76d70e2a1 | 12 | |
ubhat | 0:6cc76d70e2a1 | 13 | Maintainer: Uttam Bhat |
ubhat | 0:6cc76d70e2a1 | 14 | */ |
ubhat | 0:6cc76d70e2a1 | 15 | |
ubhat | 0:6cc76d70e2a1 | 16 | #include "ComplianceTest.h" |
ubhat | 0:6cc76d70e2a1 | 17 | |
ubhat | 0:6cc76d70e2a1 | 18 | |
ubhat | 0:6cc76d70e2a1 | 19 | void PrepareComplianceTestFrame( McpsIndication_t *McpsIndication ) |
ubhat | 0:6cc76d70e2a1 | 20 | { |
ubhat | 0:6cc76d70e2a1 | 21 | uint8_t *pData; |
ubhat | 0:6cc76d70e2a1 | 22 | |
ubhat | 0:6cc76d70e2a1 | 23 | pData = &McpsIndication->Buffer[0]; |
ubhat | 0:6cc76d70e2a1 | 24 | |
ubhat | 0:6cc76d70e2a1 | 25 | if( ComplianceTest.Running == false ) |
ubhat | 0:6cc76d70e2a1 | 26 | { |
ubhat | 0:6cc76d70e2a1 | 27 | // Check compliance test enable command (i) |
ubhat | 0:6cc76d70e2a1 | 28 | if( ( McpsIndication->BufferSize == 4 ) && |
ubhat | 0:6cc76d70e2a1 | 29 | ( pData[0] == 0x01 ) && ( pData[1] == 0x01 ) && ( pData[2] == 0x01 ) && (pData[3] == 0x01 ) ) |
ubhat | 0:6cc76d70e2a1 | 30 | { |
ubhat | 0:6cc76d70e2a1 | 31 | AppPort = 224; |
ubhat | 0:6cc76d70e2a1 | 32 | AppDataSize = 2; |
ubhat | 0:6cc76d70e2a1 | 33 | ComplianceTest.DownLinkCounter = 0; |
ubhat | 0:6cc76d70e2a1 | 34 | ComplianceTest.LinkCheck = false; |
ubhat | 0:6cc76d70e2a1 | 35 | ComplianceTest.DemodMargin = 0; |
ubhat | 0:6cc76d70e2a1 | 36 | ComplianceTest.NbGateways = 0; |
ubhat | 0:6cc76d70e2a1 | 37 | ComplianceTest.Running = true; |
ubhat | 0:6cc76d70e2a1 | 38 | ComplianceTest.State = 1; |
ubhat | 0:6cc76d70e2a1 | 39 | } |
ubhat | 0:6cc76d70e2a1 | 40 | } |
ubhat | 0:6cc76d70e2a1 | 41 | else |
ubhat | 0:6cc76d70e2a1 | 42 | { |
ubhat | 0:6cc76d70e2a1 | 43 | ComplianceTest.State = pData[0]; |
ubhat | 0:6cc76d70e2a1 | 44 | switch( ComplianceTest.State ) |
ubhat | 0:6cc76d70e2a1 | 45 | { |
ubhat | 0:6cc76d70e2a1 | 46 | case 0: // Check compliance test disable command (ii) |
ubhat | 0:6cc76d70e2a1 | 47 | IsTxConfirmed = LORAWAN_CONFIRMED_MSG_ON; |
ubhat | 0:6cc76d70e2a1 | 48 | AppPort = LORAWAN_APP_PORT; |
ubhat | 0:6cc76d70e2a1 | 49 | AppDataSize = LORAWAN_APP_DATA_SIZE; |
ubhat | 0:6cc76d70e2a1 | 50 | ComplianceTest.DownLinkCounter = 0; |
ubhat | 0:6cc76d70e2a1 | 51 | ComplianceTest.Running = false; |
ubhat | 0:6cc76d70e2a1 | 52 | |
ubhat | 0:6cc76d70e2a1 | 53 | MibRequestConfirm_t mibReq; |
ubhat | 0:6cc76d70e2a1 | 54 | mibReq.Type = MIB_ADR; |
ubhat | 0:6cc76d70e2a1 | 55 | mibReq.Param.AdrEnable = LORAWAN_ADR_ON; |
ubhat | 0:6cc76d70e2a1 | 56 | LoRaMacMibSetRequestConfirm( &mibReq ); |
ubhat | 0:6cc76d70e2a1 | 57 | break; |
ubhat | 0:6cc76d70e2a1 | 58 | case 1: // (iii, iv) |
ubhat | 0:6cc76d70e2a1 | 59 | AppDataSize = 2; |
ubhat | 0:6cc76d70e2a1 | 60 | break; |
ubhat | 0:6cc76d70e2a1 | 61 | case 2: // Enable confirmed messages (v) |
ubhat | 0:6cc76d70e2a1 | 62 | IsTxConfirmed = true; |
ubhat | 0:6cc76d70e2a1 | 63 | ComplianceTest.State = 1; |
ubhat | 0:6cc76d70e2a1 | 64 | break; |
ubhat | 0:6cc76d70e2a1 | 65 | case 3: // Disable confirmed messages (vi) |
ubhat | 0:6cc76d70e2a1 | 66 | IsTxConfirmed = false; |
ubhat | 0:6cc76d70e2a1 | 67 | ComplianceTest.State = 1; |
ubhat | 0:6cc76d70e2a1 | 68 | break; |
ubhat | 0:6cc76d70e2a1 | 69 | case 4: // (vii) |
ubhat | 0:6cc76d70e2a1 | 70 | AppDataSize = McpsIndication->BufferSize; |
ubhat | 0:6cc76d70e2a1 | 71 | |
ubhat | 0:6cc76d70e2a1 | 72 | AppData[0] = 4; |
ubhat | 0:6cc76d70e2a1 | 73 | for( uint8_t i = 1; i < AppDataSize; i++ ) |
ubhat | 0:6cc76d70e2a1 | 74 | { |
ubhat | 0:6cc76d70e2a1 | 75 | AppData[i] = McpsIndication->Buffer[i] + 1; |
ubhat | 0:6cc76d70e2a1 | 76 | } |
ubhat | 0:6cc76d70e2a1 | 77 | break; |
ubhat | 0:6cc76d70e2a1 | 78 | case 5: // (viii) |
ubhat | 0:6cc76d70e2a1 | 79 | { |
ubhat | 0:6cc76d70e2a1 | 80 | MlmeReq_t mlmeReq; |
ubhat | 0:6cc76d70e2a1 | 81 | mlmeReq.Type = MLME_LINK_CHECK; |
ubhat | 0:6cc76d70e2a1 | 82 | LoRaMacMlmeRequest( &mlmeReq ); |
ubhat | 0:6cc76d70e2a1 | 83 | } |
ubhat | 0:6cc76d70e2a1 | 84 | break; |
ubhat | 0:6cc76d70e2a1 | 85 | default: |
ubhat | 0:6cc76d70e2a1 | 86 | break; |
ubhat | 0:6cc76d70e2a1 | 87 | } |
ubhat | 0:6cc76d70e2a1 | 88 | } |
ubhat | 0:6cc76d70e2a1 | 89 | } |
ubhat | 0:6cc76d70e2a1 | 90 | |
ubhat | 0:6cc76d70e2a1 | 91 | void RunComplianceTest( void ) |
ubhat | 0:6cc76d70e2a1 | 92 | { |
ubhat | 0:6cc76d70e2a1 | 93 | if( ComplianceTest.LinkCheck == true ) |
ubhat | 0:6cc76d70e2a1 | 94 | { |
ubhat | 0:6cc76d70e2a1 | 95 | ComplianceTest.LinkCheck = false; |
ubhat | 0:6cc76d70e2a1 | 96 | AppDataSize = 3; |
ubhat | 0:6cc76d70e2a1 | 97 | AppData[0] = 5; |
ubhat | 0:6cc76d70e2a1 | 98 | AppData[1] = ComplianceTest.DemodMargin; |
ubhat | 0:6cc76d70e2a1 | 99 | AppData[2] = ComplianceTest.NbGateways; |
ubhat | 0:6cc76d70e2a1 | 100 | ComplianceTest.State = 1; |
ubhat | 0:6cc76d70e2a1 | 101 | } |
ubhat | 0:6cc76d70e2a1 | 102 | else |
ubhat | 0:6cc76d70e2a1 | 103 | { |
ubhat | 0:6cc76d70e2a1 | 104 | switch( ComplianceTest.State ) |
ubhat | 0:6cc76d70e2a1 | 105 | { |
ubhat | 0:6cc76d70e2a1 | 106 | case 1: |
ubhat | 0:6cc76d70e2a1 | 107 | AppDataSize = 2; |
ubhat | 0:6cc76d70e2a1 | 108 | AppData[0] = ComplianceTest.DownLinkCounter >> 8; |
ubhat | 0:6cc76d70e2a1 | 109 | AppData[1] = ComplianceTest.DownLinkCounter; |
ubhat | 0:6cc76d70e2a1 | 110 | break; |
ubhat | 0:6cc76d70e2a1 | 111 | |
ubhat | 0:6cc76d70e2a1 | 112 | case 4: |
ubhat | 0:6cc76d70e2a1 | 113 | ComplianceTest.State = 1; |
ubhat | 0:6cc76d70e2a1 | 114 | break; |
ubhat | 0:6cc76d70e2a1 | 115 | } |
ubhat | 0:6cc76d70e2a1 | 116 | } |
ubhat | 0:6cc76d70e2a1 | 117 | } |