Terence Huang / Canada-SX1272-LoRaWAN-Bootcamp-rotary

add rotary

Dependencies:   X_NUCLEO_IKS01A1 LoRaWAN-lib SX1272Lib mbed

Fork of Canada-SX1272-LoRaWAN-Bootcamp by Uttam Bhat

LoRaWAN-SX1272-Mbed-Shield

Overview

LoRaWAN-SX1272-Mbed-Shield application demo is a LoRaWAN Class-A device example project using LoRaWAN-lib and SX1272Lib libraries that send out sensors data.

Prerequisites

1. NUCLEO_L152RE board.
2. SX1272-mbed-shield board.
3. X-NUCLEO-IKS01A1.
4. Grove Red LED.
5. Grove Button.
6. Grove Rotary Angle Sensor.
7. mbed online compiler.
8. Tera Term.

Hardware Configuration

Application 8, 9, 11
1. Connect NUCLEO_L152RE with X-NUCLEO-IKS01A1.
2. On top of X-NUCLEO-IKS01A1, connect SX1272-mbed-shield.
Application 13
1. Connect NUCLEO_L152RE with SX1272-mbed-shield.
2. Connect Grove Red LED with DIO_D6 port on SX1272-mbed-shield.
3. Connect Grove Button with DIO_D8 port on SX1272-mbed-shield.
4. Connect Grove Rotary Angle Sensor with ANA_A1 port SX1272-mbed-shield.

Software Configuration

The end-device must be configured with the following parameters:

  • Commissioning.h
    • Activation Type: OTA or ABP
      • OTA: #define OVER_THE_AIR_ACTIVATION 1
    • Network Type: Public or Private
      • Public: #define LORAWAN_PUBLIC_NETWORK true
    • LORAWAN_DEVICE_EUI (8 Bytes) : Fist 3 Bytes is the Organizationally Unique Identifier (OUI) followed by 5 bytes of unique ID. If not defined by user, then the firmware automatically assigns one to the end-device. (For OTA)
      • #define IEEE_OUI 0x00, 0x00, 0x00
      • #define LORAWAN_DEVICE_EUI { IEEE_OUI, 0x00, 0x00, 0x00, 0x00, 0x00 }
    • LORAWAN_APPLICATION_EUI (8 Bytes) (For OTA)
      • #define LORAWAN_APPLICATION_EUI { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }
    • LORAWAN_APPLICATION_KEY (16 Bytes) (For OTA)
      • #define LORAWAN_APPLICATION_KEY { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, 0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff }
    • LORAWAN_DEVICE_ADDRESS (For ABP)
      • #define LORAWAN_DEVICE_ADDRESS ( uint32_t )0x0
    • LORAWAN_NWKSKEY (For ABP)
      • #define LORAWAN_NWKSKEY { 0x2B, 0x7E, 0x15, 0x16, 0x28, 0xAE, 0xD2, 0xA6, 0xAB, 0xF7, 0x15, 0x88, 0x09, 0xCF, 0x4F, 0x3C }
    • LORAWAN_APPSKEY (For ABP)
      • #define LORAWAN_APPSKEY { 0x2B, 0x7E, 0x15, 0x16, 0x28, 0xAE, 0xD2, 0xA6, 0xAB, 0xF7, 0x15, 0x88, 0x09, 0xCF, 0x4F, 0x3C }
  • Configure.h
    • Communication Type: Hybrid or FHSS
      • Hybrid: #define USE_BAND_915_HYBRID
    • Join request Period:
      • 5 sec: #define OVER_THE_AIR_ACTIVATION_DUTYCYCLE 5000000 value in us
    • TX Period:
      • 5 sec: #define APP_TX_DUTYCYCLE 5000000 value in us
    • Uplink message: Confirmed or Unconfirmed
      • Confirmed: #define LORAWAN_CONFIRMED_MSG_ON 1
    • ADR(Adaptive Data Rate): ON or OFF
      • OFF: #define LORAWAN_ADR_ON 0
    • Default data rate: DR_0 or DR_1 or DR_2 or DR_3 or DR_4
      • DR_0: #define LORAWAN_DEFAULT_DATARATE DR_0
    • Application Type: 8 (IKS01A1) or 9 (IKS01A1+Cayenne) or 11 (Push Button) or 13 (rotary+Cayenne)
      • 9: #define LORAWAN_APP_PORT 9
    • Tx Power: 10 to 30
      • 20 dBm: #define LORAWAN_TX_POWER TX_POWER_20_DBM

Serial Terminal Display

  • Use Tera Term to see the sending message (baud rate: 115200):
    • button = 0 (if not press) button = 1 (if pressed)
    • rotary = 0 ~ 300

1800

app/Comissioning.h@2:5859f5872d6c, 2017-07-18 (annotated)

Committer:
terence304
Date:
Tue Jul 18 01:18:28 2017 +0000
Revision:
2:5859f5872d6c
Parent:
0:6cc76d70e2a1
Child:
16:11e0125c845e
Add external button and rotary sensor

Who changed what in which revision?

UserRevisionLine numberNew contents of line
ubhat 0:6cc76d70e2a1 1 /*
ubhat 0:6cc76d70e2a1 2 / _____) _ | |
ubhat 0:6cc76d70e2a1 3 ( (____ _____ ____ _| |_ _____ ____| |__
ubhat 0:6cc76d70e2a1 4 \____ \| ___ | (_ _) ___ |/ ___) _ \
ubhat 0:6cc76d70e2a1 5 _____) ) ____| | | || |_| ____( (___| | | |
ubhat 0:6cc76d70e2a1 6 (______/|_____)_|_|_| \__)_____)\____)_| |_|
ubhat 0:6cc76d70e2a1 7 (C)2015 Semtech
ubhat 0:6cc76d70e2a1 8
ubhat 0:6cc76d70e2a1 9 Description: End device comissioning parameters
ubhat 0:6cc76d70e2a1 10
ubhat 0:6cc76d70e2a1 11 License: Revised BSD License, see LICENSE.TXT file include in the project
ubhat 0:6cc76d70e2a1 12
ubhat 0:6cc76d70e2a1 13 Maintainer: Miguel Luis and Gregory Cristian
ubhat 0:6cc76d70e2a1 14 */
ubhat 0:6cc76d70e2a1 15 #ifndef __LORA_COMISSIONING_H__
ubhat 0:6cc76d70e2a1 16 #define __LORA_COMISSIONING_H__
ubhat 0:6cc76d70e2a1 17
ubhat 0:6cc76d70e2a1 18 /*!
ubhat 0:6cc76d70e2a1 19 * When set to 1 the application uses the Over-the-Air activation procedure
ubhat 0:6cc76d70e2a1 20 * When set to 0 the application uses the Personalization activation procedure
ubhat 0:6cc76d70e2a1 21 */
ubhat 0:6cc76d70e2a1 22 #define OVER_THE_AIR_ACTIVATION 1
ubhat 0:6cc76d70e2a1 23
ubhat 0:6cc76d70e2a1 24 /*!
ubhat 0:6cc76d70e2a1 25 * Indicates if the end-device is to be connected to a private or public network
ubhat 0:6cc76d70e2a1 26 */
ubhat 0:6cc76d70e2a1 27 #define LORAWAN_PUBLIC_NETWORK true
ubhat 0:6cc76d70e2a1 28
ubhat 0:6cc76d70e2a1 29 #if( OVER_THE_AIR_ACTIVATION != 0 )
ubhat 0:6cc76d70e2a1 30
ubhat 0:6cc76d70e2a1 31 /*!
ubhat 0:6cc76d70e2a1 32 * Mote device IEEE OUI (big endian)
ubhat 0:6cc76d70e2a1 33 * \remark This is unique to a company or organization
ubhat 0:6cc76d70e2a1 34 */
ubhat 0:6cc76d70e2a1 35 #define IEEE_OUI 0x00, 0x00, 0x00
ubhat 0:6cc76d70e2a1 36
ubhat 0:6cc76d70e2a1 37 /*!
ubhat 0:6cc76d70e2a1 38 * Mote device IEEE EUI (big endian)
ubhat 0:6cc76d70e2a1 39 *
ubhat 0:6cc76d70e2a1 40 * \remark In this application, if the last 4 bytes are all 0, then the 32 bit address is automatically generated using a pseudo random generator seeded with a value derived from BoardUniqueId value
ubhat 0:6cc76d70e2a1 41 * If provided by user, e.g. { IEEE_OUI, 0x00, 0x00, 0x00, 0xFF, 0x01 }, then this value is used by the application
ubhat 0:6cc76d70e2a1 42 */
terence304 2:5859f5872d6c 43 #define LORAWAN_DEVICE_EUI { IEEE_OUI, 0x00, 0x11, 0x22, 0x33, 0x45 }
ubhat 0:6cc76d70e2a1 44
ubhat 0:6cc76d70e2a1 45 /*!
ubhat 0:6cc76d70e2a1 46 * Application IEEE EUI (big endian)
ubhat 0:6cc76d70e2a1 47 */
terence304 2:5859f5872d6c 48 #define LORAWAN_APPLICATION_EUI { 0x00, 0x00, 0x00, 0x00, 0x55, 0x66, 0x77, 0x88 }
ubhat 0:6cc76d70e2a1 49
ubhat 0:6cc76d70e2a1 50 /*!
ubhat 0:6cc76d70e2a1 51 * AES encryption/decryption cipher application key
ubhat 0:6cc76d70e2a1 52 */
ubhat 0:6cc76d70e2a1 53 #define LORAWAN_APPLICATION_KEY { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, 0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff }
ubhat 0:6cc76d70e2a1 54
ubhat 0:6cc76d70e2a1 55 #else
ubhat 0:6cc76d70e2a1 56
ubhat 0:6cc76d70e2a1 57 /*!
ubhat 0:6cc76d70e2a1 58 * Device address on the network (big endian)
ubhat 0:6cc76d70e2a1 59 *
ubhat 0:6cc76d70e2a1 60 * \remark In this application, if the value is 0, then the address is automatically generated using a pseudo random generator seeded with a value derived from BoardUniqueId value
ubhat 0:6cc76d70e2a1 61 * If provided by user, e.g. 0x78563412, then this value is used by the application
ubhat 0:6cc76d70e2a1 62 */
ubhat 0:6cc76d70e2a1 63 #define LORAWAN_DEVICE_ADDRESS ( uint32_t )0x0
ubhat 0:6cc76d70e2a1 64
ubhat 0:6cc76d70e2a1 65 /*!
ubhat 0:6cc76d70e2a1 66 * AES encryption/decryption cipher network session key
ubhat 0:6cc76d70e2a1 67 */
ubhat 0:6cc76d70e2a1 68 #define LORAWAN_NWKSKEY { 0x2B, 0x7E, 0x15, 0x16, 0x28, 0xAE, 0xD2, 0xA6, 0xAB, 0xF7, 0x15, 0x88, 0x09, 0xCF, 0x4F, 0x3C }
ubhat 0:6cc76d70e2a1 69
ubhat 0:6cc76d70e2a1 70 /*!
ubhat 0:6cc76d70e2a1 71 * AES encryption/decryption cipher application session key
ubhat 0:6cc76d70e2a1 72 */
ubhat 0:6cc76d70e2a1 73 #define LORAWAN_APPSKEY { 0x2B, 0x7E, 0x15, 0x16, 0x28, 0xAE, 0xD2, 0xA6, 0xAB, 0xF7, 0x15, 0x88, 0x09, 0xCF, 0x4F, 0x3C }
ubhat 0:6cc76d70e2a1 74
ubhat 0:6cc76d70e2a1 75 #endif
ubhat 0:6cc76d70e2a1 76
ubhat 0:6cc76d70e2a1 77
ubhat 0:6cc76d70e2a1 78 #endif // __LORA_COMISSIONING_H__