File content as of revision 5:9c04464cd1b4:
/***************************************************
This is a library for the Adafruit 1.8" SPI display.
This library works with the Adafruit 1.8" TFT Breakout w/SD card
----> http://www.adafruit.com/products/358
as well as Adafruit raw 1.8" TFT display
----> http://www.adafruit.com/products/618
Check out the links above for our tutorials and wiring diagrams
These displays use SPI to communicate, 4 or 5 pins are required to
interface (RST is optional)
Adafruit invests time and resources providing this open source code,
please support Adafruit and open-source hardware by purchasing
products from Adafruit!
Written by Limor Fried/Ladyada for Adafruit Industries.
MIT license, all text above must be included in any redistribution
****************************************************/
#include "mbed.h"
#include "Adafruit_ST7735.h"
inline uint16_t swapcolor(uint16_t x) {
return (x << 11) | (x & 0x07E0) | (x >> 11);
}
// Constructor
Adafruit_ST7735::Adafruit_ST7735(PinName mosi, PinName miso, PinName sck, PinName cs, PinName rs, PinName rst)
: lcdPort(mosi, miso, sck), _cs(cs), _rs(rs), _rst(rst), Adafruit_GFX(ST7735_TFTWIDTH, ST7735_TFTHEIGHT)
{ }
void Adafruit_ST7735::writecommand(uint8_t c)
{
_rs = 0;
_cs = 0;
lcdPort.write( c );
_cs = 1;
}
void Adafruit_ST7735::writedata(uint8_t c)
{
_rs = 1;
_cs = 0;
lcdPort.write( c );
_cs = 1;
}
// Rather than a bazillion writecommand() and writedata() calls, screen
// initialization commands and arguments are organized in these tables
// stored in PROGMEM. The table may look bulky, but that's mostly the
// formatting -- storage-wise this is hundreds of bytes more compact
// than the equivalent code. Companion function follows.
#define DELAY 0x80
static unsigned char
Bcmd[] = { // Initialization commands for 7735B screens
18, // 18 commands in list:
ST7735_SWRESET, DELAY, // 1: Software reset, no args, w/delay
50, // 50 ms delay
ST7735_SLPOUT , DELAY, // 2: Out of sleep mode, no args, w/delay
255, // 255 = 500 ms delay
ST7735_COLMOD , 1+DELAY, // 3: Set color mode, 1 arg + delay:
0x05, // 16-bit color
10, // 10 ms delay
ST7735_FRMCTR1, 3+DELAY, // 4: Frame rate control, 3 args + delay:
0x00, // fastest refresh
0x06, // 6 lines front porch
0x03, // 3 lines back porch
10, // 10 ms delay
ST7735_MADCTL , 1 , // 5: Memory access ctrl (directions), 1 arg:
0x08, // Row addr/col addr, bottom to top refresh
ST7735_DISSET5, 2 , // 6: Display settings #5, 2 args, no delay:
0x15, // 1 clk cycle nonoverlap, 2 cycle gate
// rise, 3 cycle osc equalize
0x02, // Fix on VTL
ST7735_INVCTR , 1 , // 7: Display inversion control, 1 arg:
0x0, // Line inversion
ST7735_PWCTR1 , 2+DELAY, // 8: Power control, 2 args + delay:
0x02, // GVDD = 4.7V
0x70, // 1.0uA
10, // 10 ms delay
ST7735_PWCTR2 , 1 , // 9: Power control, 1 arg, no delay:
0x05, // VGH = 14.7V, VGL = -7.35V
ST7735_PWCTR3 , 2 , // 10: Power control, 2 args, no delay:
0x01, // Opamp current small
0x02, // Boost frequency
ST7735_VMCTR1 , 2+DELAY, // 11: Power control, 2 args + delay:
0x3C, // VCOMH = 4V
0x38, // VCOML = -1.1V
10, // 10 ms delay
ST7735_PWCTR6 , 2 , // 12: Power control, 2 args, no delay:
0x11, 0x15,
ST7735_GMCTRP1,16 , // 13: Magical unicorn dust, 16 args, no delay:
0x09, 0x16, 0x09, 0x20, // (seriously though, not sure what
0x21, 0x1B, 0x13, 0x19, // these config values represent)
0x17, 0x15, 0x1E, 0x2B,
0x04, 0x05, 0x02, 0x0E,
ST7735_GMCTRN1,16+DELAY, // 14: Sparkles and rainbows, 16 args + delay:
0x0B, 0x14, 0x08, 0x1E, // (ditto)
0x22, 0x1D, 0x18, 0x1E,
0x1B, 0x1A, 0x24, 0x2B,
0x06, 0x06, 0x02, 0x0F,
10, // 10 ms delay
ST7735_CASET , 4 , // 15: Column addr set, 4 args, no delay:
0x00, 0x02, // XSTART = 2
0x00, 0x81, // XEND = 129
ST7735_RASET , 4 , // 16: Row addr set, 4 args, no delay:
0x00, 0x02, // XSTART = 1
0x00, 0x81, // XEND = 160
ST7735_NORON , DELAY, // 17: Normal display on, no args, w/delay
10, // 10 ms delay
ST7735_DISPON , DELAY, // 18: Main screen turn on, no args, w/delay
255 }, // 255 = 500 ms delay
Rcmd1[] = { // Init for 7735R, part 1 (red or green tab)
15, // 15 commands in list:
ST7735_SWRESET, DELAY, // 1: Software reset, 0 args, w/delay
150, // 150 ms delay
ST7735_SLPOUT , DELAY, // 2: Out of sleep mode, 0 args, w/delay
255, // 500 ms delay
ST7735_FRMCTR1, 3 , // 3: Frame rate ctrl - normal mode, 3 args:
0x01, 0x2C, 0x2D, // Rate = fosc/(1x2+40) * (LINE+2C+2D)
ST7735_FRMCTR2, 3 , // 4: Frame rate control - idle mode, 3 args:
0x01, 0x2C, 0x2D, // Rate = fosc/(1x2+40) * (LINE+2C+2D)
ST7735_FRMCTR3, 6 , // 5: Frame rate ctrl - partial mode, 6 args:
0x01, 0x2C, 0x2D, // Dot inversion mode
0x01, 0x2C, 0x2D, // Line inversion mode
ST7735_INVCTR , 1 , // 6: Display inversion ctrl, 1 arg, no delay:
0x07, // No inversion
ST7735_PWCTR1 , 3 , // 7: Power control, 3 args, no delay:
0xA2,
0x02, // -4.6V
0x84, // AUTO mode
ST7735_PWCTR2 , 1 , // 8: Power control, 1 arg, no delay:
0xC5, // VGH25 = 2.4C VGSEL = -10 VGH = 3 * AVDD
ST7735_PWCTR3 , 2 , // 9: Power control, 2 args, no delay:
0x0A, // Opamp current small
0x00, // Boost frequency
ST7735_PWCTR4 , 2 , // 10: Power control, 2 args, no delay:
0x8A, // BCLK/2, Opamp current small & Medium low
0x2A,
ST7735_PWCTR5 , 2 , // 11: Power control, 2 args, no delay:
0x8A, 0xEE,
ST7735_VMCTR1 , 1 , // 12: Power control, 1 arg, no delay:
0x0E,
ST7735_INVOFF , 0 , // 13: Don't invert display, no args, no delay
ST7735_MADCTL , 1 , // 14: Memory access control (directions), 1 arg:
0xC8, // row addr/col addr, bottom to top refresh
ST7735_COLMOD , 1 , // 15: set color mode, 1 arg, no delay:
0x05 }, // 16-bit color
Rcmd2green[] = { // Init for 7735R, part 2 (green tab only)
2, // 2 commands in list:
ST7735_CASET , 4 , // 1: Column addr set, 4 args, no delay:
0x00, 0x02, // XSTART = 0
0x00, 0x7F+0x02, // XEND = 127
ST7735_RASET , 4 , // 2: Row addr set, 4 args, no delay:
0x00, 0x01, // XSTART = 0
0x00, 0x9F+0x01 }, // XEND = 159
Rcmd2red[] = { // Init for 7735R, part 2 (red tab only)
2, // 2 commands in list:
ST7735_CASET , 4 , // 1: Column addr set, 4 args, no delay:
0x00, 0x00, // XSTART = 0
0x00, 0x7F, // XEND = 127
ST7735_RASET , 4 , // 2: Row addr set, 4 args, no delay:
0x00, 0x00, // XSTART = 0
0x00, 0x9F }, // XEND = 159
Rcmd2green144[] = { // Init for 7735R, part 2 (green 1.44 tab)
2, // 2 commands in list:
ST7735_CASET , 4 , // 1: Column addr set, 4 args, no delay:
0x00, 0x00, // XSTART = 0
0x00, 0x7F, // XEND = 127
ST7735_RASET , 4 , // 2: Row addr set, 4 args, no delay:
0x00, 0x00, // XSTART = 0
0x00, 0x7F }, // XEND = 127
Rcmd3[] = { // Init for 7735R, part 3 (red or green tab)
4, // 4 commands in list:
ST7735_GMCTRP1, 16 , // 1: Magical unicorn dust, 16 args, no delay:
0x02, 0x1c, 0x07, 0x12,
0x37, 0x32, 0x29, 0x2d,
0x29, 0x25, 0x2B, 0x39,
0x00, 0x01, 0x03, 0x10,
ST7735_GMCTRN1, 16 , // 2: Sparkles and rainbows, 16 args, no delay:
0x03, 0x1d, 0x07, 0x06,
0x2E, 0x2C, 0x29, 0x2D,
0x2E, 0x2E, 0x37, 0x3F,
0x00, 0x00, 0x02, 0x10,
ST7735_NORON , DELAY, // 3: Normal display on, no args, w/delay
10, // 10 ms delay
ST7735_DISPON , DELAY, // 4: Main screen turn on, no args w/delay
100 }; // 100 ms delay
// Companion code to the above tables. Reads and issues
// a series of LCD commands stored in byte array.
void Adafruit_ST7735::commandList(uint8_t *addr)
{
uint8_t numCommands, numArgs;
uint16_t ms;
numCommands = *addr++; // Number of commands to follow
while(numCommands--) { // For each command...
writecommand(*addr++); // Read, issue command
numArgs = *addr++; // Number of args to follow
ms = numArgs & DELAY; // If hibit set, delay follows args
numArgs &= ~DELAY; // Mask out delay bit
while(numArgs--) { // For each argument...
writedata(*addr++); // Read, issue argument
}
if(ms) {
ms = *addr++; // Read post-command delay time (ms)
if(ms == 255) ms = 500; // If 255, delay for 500 ms
wait_ms(ms);
}
}
}
// Initialization code common to both 'B' and 'R' type displays
void Adafruit_ST7735::commonInit(uint8_t *cmdList)
{
colstart = rowstart = 0; // May be overridden in init func
_rs = 1;
_cs = 1;
// use default SPI format
lcdPort.format(8,0);
lcdPort.frequency(4000000); // Lets try 4MHz
// toggle RST low to reset; CS low so it'll listen to us
_cs = 0;
_rst = 1;
wait_ms(500);
_rst = 0;
wait_ms(500);
_rst = 1;
wait_ms(500);
if(cmdList) commandList(cmdList);
}
// Initialization for ST7735B screens
void Adafruit_ST7735::initB(void)
{
commonInit(Bcmd);
}
// Initialization for ST7735R screens (green or red tabs)
void Adafruit_ST7735::initR(uint8_t options) {
commonInit(Rcmd1);
if(options == INITR_GREENTAB) {
commandList(Rcmd2green);
colstart = 2;
rowstart = 1;
} else if(options == INITR_144GREENTAB) {
_height = ST7735_TFTHEIGHT_144;
commandList(Rcmd2green144);
colstart = 2;
rowstart = 3;
} else {
// colstart, rowstart left at default '0' values
commandList(Rcmd2red);
}
commandList(Rcmd3);
// if black, change MADCTL color filter
if (options == INITR_BLACKTAB) {
writecommand(ST7735_MADCTL);
writedata(0xC0);
}
tabcolor = options;
}
void Adafruit_ST7735::setAddrWindow(uint8_t x0, uint8_t y0, uint8_t x1,
uint8_t y1)
{
writecommand(ST7735_CASET); // Column addr set
writedata(0x00);
writedata(x0+colstart); // XSTART
writedata(0x00);
writedata(x1+colstart); // XEND
writecommand(ST7735_RASET); // Row addr set
writedata(0x00);
writedata(y0+rowstart); // YSTART
writedata(0x00);
writedata(y1+rowstart); // YEND
writecommand(ST7735_RAMWR); // write to RAM
}
void Adafruit_ST7735::pushColor(uint16_t color)
{
_rs = 1;
_cs = 0;
lcdPort.write( color >> 8 );
lcdPort.write( color );
_cs = 1;
}
void Adafruit_ST7735::drawPixel(int16_t x, int16_t y, uint16_t color)
{
if((x < 0) ||(x >= _width) || (y < 0) || (y >= _height)) return;
setAddrWindow(x,y,x+1,y+1);
_rs = 1;
_cs = 0;
lcdPort.write( color >> 8 );
lcdPort.write( color );
_cs = 1;
}
void Adafruit_ST7735::drawFastVLine(int16_t x, int16_t y, int16_t h,
uint16_t color)
{
// Rudimentary clipping
if((x >= _width) || (y >= _height)) return;
if((y+h-1) >= _height) h = _height-y;
setAddrWindow(x, y, x, y+h-1);
uint8_t hi = color >> 8, lo = color;
_rs = 1;
_cs = 0;
while (h--) {
lcdPort.write( hi );
lcdPort.write( lo );
}
_cs = 1;
}
void Adafruit_ST7735::drawFastHLine(int16_t x, int16_t y, int16_t w,
uint16_t color)
{
// Rudimentary clipping
if((x >= _width) || (y >= _height)) return;
if((x+w-1) >= _width) w = _width-x;
setAddrWindow(x, y, x+w-1, y);
uint8_t hi = color >> 8, lo = color;
_rs = 1;
_cs = 0;
while (w--) {
lcdPort.write( hi );
lcdPort.write( lo );
}
_cs = 1;
}
void Adafruit_ST7735::fillScreen(uint16_t color)
{
fillRect(0, 0, _width, _height, color);
}
// fill a rectangle
void Adafruit_ST7735::fillRect(int16_t x, int16_t y, int16_t w, int16_t h,
uint16_t color)
{
// rudimentary clipping (drawChar w/big text requires this)
if((x >= _width) || (y >= _height)) return;
if((x + w - 1) >= _width) w = _width - x;
if((y + h - 1) >= _height) h = _height - y;
setAddrWindow(x, y, x+w-1, y+h-1);
uint8_t hi = color >> 8, lo = color;
_rs = 1;
_cs = 0;
for(y=h; y>0; y--) {
for(x=w; x>0; x--) {
lcdPort.write( hi );
lcdPort.write( lo );
}
}
_cs = 1;
}
// Pass 8-bit (each) R,G,B, get back 16-bit packed color
uint16_t Adafruit_ST7735::Color565(uint8_t r, uint8_t g, uint8_t b)
{
return ((r & 0xF8) << 8) | ((g & 0xFC) << 3) | (b >> 3);
}
#define MADCTL_MY 0x80
#define MADCTL_MX 0x40
#define MADCTL_MV 0x20
#define MADCTL_ML 0x10
#define MADCTL_RGB 0x08
#define MADCTL_MH 0x04
void Adafruit_ST7735::setRotation(uint8_t m)
{
writecommand(ST7735_MADCTL);
rotation = m % 4; // can't be higher than 3
switch (rotation) {
case 0:
writedata(MADCTL_MX | MADCTL_MY | MADCTL_RGB);
_width = ST7735_TFTWIDTH;
_height = ST7735_TFTHEIGHT;
break;
case 1:
writedata(MADCTL_MY | MADCTL_MV | MADCTL_RGB);
_width = ST7735_TFTHEIGHT;
_height = ST7735_TFTWIDTH;
break;
case 2:
writedata(MADCTL_RGB);
_width = ST7735_TFTWIDTH;
_height = ST7735_TFTHEIGHT;
break;
case 3:
writedata(MADCTL_MX | MADCTL_MV | MADCTL_RGB);
_width = ST7735_TFTHEIGHT;
_height = ST7735_TFTWIDTH;
break;
}
}
void Adafruit_ST7735::invertDisplay(boolean i)
{
writecommand(i ? ST7735_INVON : ST7735_INVOFF);
}