![](/media/cache/profiles/dc960c46c38bd16e953d97cdeefdbc68.50x50_q85.jpg)
BlueUSB with USB-> SERIAL (CP210x) GPIO pins working.
USBHost.h
- Committer:
- tecnosys
- Date:
- 2010-04-23
- Revision:
- 0:a14eaa2e1445
File content as of revision 0:a14eaa2e1445:
/* Copyright (c) 2010 Peter Barrett Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ #ifndef USBHOST_H #define USBHOST_H #ifndef u8 typedef unsigned char u8; typedef unsigned short u16; typedef unsigned long u32; typedef char s8; typedef short s16; typedef char s32; #endif #define ENDPOINT_CONTROL 0 #define ENDPOINT_ISOCRONOUS 1 #define ENDPOINT_BULK 2 #define ENDPOINT_INTERRUPT 3 #define DESCRIPTOR_TYPE_DEVICE 1 #define DESCRIPTOR_TYPE_CONFIGURATION 2 #define DESCRIPTOR_TYPE_STRING 3 #define DESCRIPTOR_TYPE_INTERFACE 4 #define DESCRIPTOR_TYPE_ENDPOINT 5 #define DESCRIPTOR_TYPE_HID 0x21 #define DESCRIPTOR_TYPE_REPORT 0x22 #define DESCRIPTOR_TYPE_PHYSICAL 0x23 #define DESCRIPTOR_TYPE_HUB 0x29 enum USB_CLASS_CODE { CLASS_DEVICE, CLASS_AUDIO, CLASS_COMM_AND_CDC_CONTROL, CLASS_HID, CLASS_PHYSICAL = 0x05, CLASS_STILL_IMAGING, CLASS_PRINTER, CLASS_MASS_STORAGE, CLASS_HUB, CLASS_CDC_DATA, CLASS_SMART_CARD, CLASS_CONTENT_SECURITY = 0x0D, CLASS_VIDEO = 0x0E, CLASS_DIAGNOSTIC_DEVICE = 0xDC, CLASS_WIRELESS_CONTROLLER = 0xE0, CLASS_MISCELLANEOUS = 0xEF, CLASS_APP_SPECIFIC = 0xFE, CLASS_VENDOR_SPECIFIC = 0xFF }; #define DEVICE_TO_HOST 0x80 #define HOST_TO_DEVICE 0x00 #define REQUEST_TYPE_CLASS 0x20 #define RECIPIENT_DEVICE 0x00 #define RECIPIENT_INTERFACE 0x01 #define RECIPIENT_ENDPOINT 0x02 #define RECIPIENT_OTHER 0x03 #define GET_STATUS 0 #define CLEAR_FEATURE 1 #define SET_FEATURE 3 #define SET_ADDRESS 5 #define GET_DESCRIPTOR 6 #define SET_DESCRIPTOR 7 #define GET_CONFIGURATION 8 #define SET_CONFIGURATION 9 #define GET_INTERFACE 10 #define SET_INTERFACE 11 #define SYNCH_FRAME 11 // -5 is nak /* 0010 ACK Handshake 1010 NAK Handshake 1110 STALL Handshake 0110 NYET (No Response Yet) */ #define IO_PENDING -100 #define ERR_ENDPOINT_NONE_LEFT -101 #define ERR_ENDPOINT_NOT_FOUND -102 #define ERR_DEVICE_NOT_FOUND -103 #define ERR_DEVICE_NONE_LEFT -104 #define ERR_HUB_INIT_FAILED -105 #define ERR_INTERFACE_NOT_FOUND -106 typedef struct { u8 bLength; u8 bDescriptorType; u16 bcdUSB; u8 bDeviceClass; u8 bDeviceSubClass; u8 bDeviceProtocol; u8 bMaxPacketSize; u16 idVendor; u16 idProduct; u16 bcdDevice; // version u8 iManufacturer; u8 iProduct; u8 iSerialNumber; u8 bNumConfigurations; } DeviceDescriptor; // 16 bytes typedef struct { u8 bLength; u8 bDescriptorType; u16 wTotalLength; u8 bNumInterfaces; u8 bConfigurationValue; // Value to use as an argument to select this configuration u8 iConfiguration; // Index of String Descriptor describing this configuration u8 bmAttributes; // Bitmap D7 Reserved, set to 1. (USB 1.0 Bus Powered),D6 Self Powered,D5 Remote Wakeup,D4..0 = 0 u8 bMaxPower; // Maximum Power Consumption in 2mA units } ConfigurationDescriptor; typedef struct { u8 bLength; u8 bDescriptorType; u8 bInterfaceNumber; u8 bAlternateSetting; u8 bNumEndpoints; u8 bInterfaceClass; u8 bInterfaceSubClass; u8 bInterfaceProtocol; u8 iInterface; // Index of String Descriptor Describing this interface } InterfaceDescriptor; typedef struct { u8 bLength; u8 bDescriptorType; u8 bEndpointAddress; // Bits 0:3 endpoint, Bits 7 Direction 0 = Out, 1 = In (Ignored for Control Endpoints) u8 bmAttributes; // Bits 0:1 00 = Control, 01 = Isochronous, 10 = Bulk, 11 = Interrupt u16 wMaxPacketSize; u8 bInterval; // Interval for polling endpoint data transfers. } EndpointDescriptor; typedef struct { u8 bLength; u8 bDescriptorType; u16 bcdHID; u8 bCountryCode; u8 bNumDescriptors; u8 bDescriptorType2; u16 wDescriptorLength; } HIDDescriptor; //============================================================================ //============================================================================ void USBInit(); void USBLoop(); u8* USBGetBuffer(u32* len); // Optional callback for transfers, called at interrupt time typedef void (*USBCallback)(int device, int endpoint, int status, u8* data, int len, void* userData); // Transfers int USBControlTransfer(int device, int request_type, int request, int value, int index, u8* data, int length, USBCallback callback = 0, void* userData = 0); int USBInterruptTransfer(int device, int ep, u8* data, int length, USBCallback callback = 0, void* userData = 0); int USBBulkTransfer(int device, int ep, u8* data, int length, USBCallback callback = 0, void* userData = 0); // Standard Device methods int GetDescriptor(int device, int descType, int descIndex, u8* data, int length); int GetString(int device, int index, char* dst, int length); int SetAddress(int device, int new_addr); int SetConfiguration(int device, int configNum); int SetInterface(int device, int ifNum, int altNum); // Implemented to notify app of the arrival of a device void OnLoadDevice(int device, DeviceDescriptor* deviceDesc, InterfaceDescriptor* interfaceDesc); #endif