TASS Belgium / Mbed 2 deprecated lpc1768-picotcp-demo

A PicoTCP demo app testing the ethernet throughput on the lpc1768 mbed board.

Dependencies:   PicoTCP lpc1768-picotcp-eth mbed-rtos mbed picotcp-demo-printf

This is a demo application, using the PicoTCP socket API, to show the performance of a TCP sender towards an endpoint connected via Ethernet.

This application runs on the NXP LPC1768 mbed board.

This demo should give you following output on the mbed lpc1768's serial port:

>>> Welcome 2 PicoTCP <<<
ip=192.168.100.1 - will connect to 192.168.100.2:4404 in 5 seconds...
PicoTCP Benchmark starting...
Opening socket...
tb> Connection established with server.
tb> TCPSIZ written
tb> Called shutdown()
tb> Transmitted 10485760 bytes in 6704 milliseconds
tb> average write throughput 12512 kbit/sec
tb> Socket closed. Exit normally.

On the receiving side (e.g. linux computer) you could receive the packets sent by PicoTCP with netcat - e.g.:

ifconfig eth0 192.168.100.2
nc -l -p 4404 > /dev/null

History

Converted to APP default tip

2013-05-17, by daniele [Fri, 17 May 2013 14:56:29 +0000] rev 1

Converted to APP

Initial commit of PicoTCP demo app testing the ethernet throughput on the lpc1768 mbed board.

2013-05-17, by tass [Fri, 17 May 2013 12:51:54 +0000] rev 0

Initial commit of PicoTCP demo app testing the ethernet throughput on the lpc1768 mbed board.