test
Diff: a4960.cpp
- Revision:
- 0:56b10b0c7db4
diff -r 000000000000 -r 56b10b0c7db4 a4960.cpp --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/a4960.cpp Thu Mar 01 00:46:05 2018 +0000 @@ -0,0 +1,88 @@ +#include "a4960.h" + +a4960::a4960() : spi(PB_15,PB_14,PB_13), _cs_pin(PB_1), _blink_pin(LED1), _PWM_pin(PA_11) +{ + PWM_freq = 20000.0; + PWM_duty = 0.5; + motor_started = true; + + _config[0] = 0b0000000000000000; // 50 us comm blank time, 2.4 us blank time, 200 ns deadtime + _config[1] = 0b0010000000000000; // Vri = 100% Vref, Vdsth = 800mV + _config[2] = 0b0100000000000000; // 35.6 us current control time + _config[3] = 0b0110000000000000; // current limited, 50% current for hold, 18ms hold time + _config[4] = 0b1000000000000000; // 0.8ms min comm time, 24 ms start comm time + _config[5] = 0b1010000000000000; // 16.875deg phase adv, 100% ramp current, 0.4ms ramp rate + _config[6] = 0b1100000000000000; // fault detection all on + _config[7] = 0b1110000000000100; + // auto BEMF hyst, 3.2us zx det window, no stop on fail, DIAG pin = fault, restart on loss of sync, brake off, forward, coast + + SPI_init(); +} + +void a4960::SPI_init() +{ + // initialize pins + _cs_pin = 1; + _blink_pin = 1; + _PWM_pin.period(1/PWM_freq); + _PWM_pin.write(PWM_duty); + spi.format(16,3); + spi.frequency(1000000); + // initialize SPI connection + //SPI.begin(P0_8, P0_9, P0_11);//SCK, MOSI, MOSI + // set registers to default config + for (int i = 0; i < 8; i++) { + write_to_a4960(_config[i]); + } + // turn off pin to indicate initialization complete + _blink_pin = 0; +} +void a4960::write_to_a4960(uint16_t msg) +{ + // split 16-bit message to a4960 into two 8-bit messages + uint8_t ms_half; + uint8_t ls_half; + + // ---- 1st message (bits 15 - 8) + // 3 bit address + // 12 bit message + // shift message to get rid of 8 LSB on the end and OR + // the write bit and the + // 4 remaining bits into the first-half msg + ms_half = 1 << 4 | (uint8_t)(msg>>8); + // ---- 2nd message (bits 7 - 0) + ls_half = (uint8_t)(msg); + + // pull to active low + _cs_pin = 0; + wait_us(200); + + // transfer the to messages halves, MSB first + printf("test %d :%d\n\r",spi.write(ms_half<<8 | ls_half),(ms_half<<8 | ls_half)); + printf("test2 :%d",spi.write(0)); + + // wait and pull CS line back to inactive high + wait_us(200); + _cs_pin = 1; +} + +void a4960::write_run(void) +{ + write_to_a4960(_config[7] | 1); +} + +void a4960::write_brake(void) +{ + write_to_a4960(_config[7]); +} + +int a4960::read() +{ _cs_pin = 0; + uint8_t h; + wait_us(200); + h = spi.write(0b1110000000000000); + //h = spi.write(0); + wait_us(200); + _cs_pin = 1; + return h; +} \ No newline at end of file