Diff: vendor/Freescale/KL25Z/hal/analogin_api.c

Revision:

10:3bc89ef62ce7

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/vendor/Freescale/KL25Z/hal/analogin_api.c	Fri Jun 14 17:49:17 2013 +0100
@@ -0,0 +1,87 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "analogin_api.h"
+
+#include "cmsis.h"
+#include "pinmap.h"
+#include "error.h"
+
+static const PinMap PinMap_ADC[] = {
+    {PTE20, ADC0_SE0,  0},
+    {PTE22, ADC0_SE3,  0},
+    {PTE29, ADC0_SE4b, 0},
+    {PTE30, ADC0_SE23, 0},
+    {PTB0,  ADC0_SE8,  0},
+    {PTB1,  ADC0_SE9,  0},
+    {PTB2,  ADC0_SE12, 0},
+    {PTB3,  ADC0_SE13, 0},
+    {PTC0,  ADC0_SE14, 0},
+    {PTC1,  ADC0_SE15, 0},
+    {PTC2,  ADC0_SE11, 0},
+    {PTD1,  ADC0_SE5b, 0},
+    {PTD5,  ADC0_SE6b, 0},
+    {PTD6,  ADC0_SE7b, 0},
+    {NC,    NC,        0}
+};
+
+void analogin_init(analogin_t *obj, PinName pin) {
+    obj->adc = (ADCName)pinmap_peripheral(pin, PinMap_ADC);
+    if (obj->adc == (uint32_t)NC) {
+        error("ADC pin mapping failed");
+    }
+
+    SIM->SCGC6 |= SIM_SCGC6_ADC0_MASK;
+
+    uint32_t port = (uint32_t)pin >> PORT_SHIFT;
+    SIM->SCGC5 |= 1 << (SIM_SCGC5_PORTA_SHIFT + port);
+
+    ADC0->SC1[1] = ADC_SC1_ADCH(obj->adc);
+
+    ADC0->CFG1 = ADC_CFG1_ADLPC_MASK    // Low-Power Configuration
+               | ADC_CFG1_ADIV(3)       // Clock Divide Select: (Input Clock)/8
+               | ADC_CFG1_ADLSMP_MASK   // Long Sample Time
+               | ADC_CFG1_MODE(3)       // (16)bits Resolution
+               | ADC_CFG1_ADICLK(1);    // Input Clock: (Bus Clock)/2
+
+    ADC0->CFG2 = ADC_CFG2_MUXSEL_MASK   // ADxxb channels are selected
+               | ADC_CFG2_ADACKEN_MASK  // Asynchronous Clock Output Enable
+               | ADC_CFG2_ADHSC_MASK    // High-Speed Configuration
+               | ADC_CFG2_ADLSTS(0);    // Long Sample Time Select
+
+    ADC0->SC2 = ADC_SC2_REFSEL(0);      // Default Voltage Reference
+
+    ADC0->SC3 = ADC_SC3_AVGE_MASK       // Hardware Average Enable
+              | ADC_SC3_AVGS(0);        // 4 Samples Averaged
+
+    pinmap_pinout(pin, PinMap_ADC);
+}
+
+uint16_t analogin_read_u16(analogin_t *obj) {
+    // start conversion
+    ADC0->SC1[0] = ADC_SC1_ADCH(obj->adc);
+
+    // Wait Conversion Complete
+    while ((ADC0->SC1[0] & ADC_SC1_COCO_MASK) != ADC_SC1_COCO_MASK);
+
+    // Return value
+    return (uint16_t)ADC0->R[0];
+}
+
+float analogin_read(analogin_t *obj) {
+    uint16_t value = analogin_read_u16(obj);
+    return (float)value * (1.0f / (float)0xFFFF);
+}
+