File content as of revision 0:5c4d7b2438d3:

# -*- python -*-
# ex: set syntax=python:

# This is a sample buildmaster config file. It must be installed as
# 'master.cfg' in your buildmaster's base directory.

# This is the dictionary that the buildmaster pays attention to. We also use
# a shorter alias to save typing.
c = BuildmasterConfig = {}

####### BUILDSLAVES

# The 'slaves' list defines the set of recognized buildslaves. Each element is
# a BuildSlave object, specifying a unique slave name and password.  The same
# slave name and password must be configured on the slave.
from buildbot.buildslave import BuildSlave
c['slaves'] = [BuildSlave("example-slave", "pass"),
               BuildSlave("example-slave-2", "pass"),
               BuildSlave("example-slave-KL25Z", "pass"),
               BuildSlave("example-slave-LPC1768", "pass"),
               BuildSlave("example-slave-LPC11U24", "pass"),
              ]

# 'slavePortnum' defines the TCP port to listen on for connections from slaves.
# This must match the value configured into the buildslaves (with their
# --master option)
c['slavePortnum'] = 9989

####### OFFICIAL_MBED_LIBRARY_BUILD

OFFICIAL_MBED_LIBRARY_BUILD = (
    ('LPC1768', ('ARM', 'GCC_ARM', 'GCC_CR', 'IAR')),
    ('KL05Z', ('ARM', 'uARM', 'GCC_ARM')),
    ('KL25Z', ('ARM', 'GCC_ARM')),
    ('LPC11U24', ('ARM', 'uARM')),
    ('KL46Z', ('ARM', 'GCC_ARM')),
    ('LPC4088', ('ARM', 'GCC_ARM', 'GCC_CR')),
    ('LPC1347', ('ARM',)),
    ('LPC1549', ('uARM',)),
    ('LPC2368', ('ARM',)),
    ('LPC812', ('uARM',)),
    ('LPC11U35_401', ('ARM', 'uARM')),
    ('LPC1114', ('uARM',)),
    ('NUCLEO_F103RB', ('ARM', 'uARM')),
    ('NUCLEO_L152RE', ('ARM', 'uARM')),
    ('NUCLEO_F401RE', ('ARM', 'uARM')),
    ('NUCLEO_F030R8', ('ARM', 'uARM')),
    ('UBLOX_C027', ('ARM', 'GCC_ARM', 'GCC_CR', 'IAR')),
    # ('NRF51822', ('ARM',)),
)

# Which hardware platforms are supported for target testing
OFFICIAL_MBED_TESTBED_SUPPORTED_HARDWARE = (
    # 'KL25Z',
    # 'LPC1768',
    # 'LPC11U24',
)

####### CHANGESOURCES

# the 'change_source' setting tells the buildmaster how it should find out
# about source code changes.  Here we point to the buildbot clone of pyflakes.

from buildbot.changes.gitpoller import GitPoller
c['change_source'] = []
"""
c['change_source'].append(GitPoller(
        'git://github.com/buildbot/pyflakes.git',
        workdir='gitpoller-workdir', branch='master',
        pollinterval=300))
"""
####### SCHEDULERS

# Configure the Schedulers, which decide how to react to incoming changes.  In this
# case, just kick off a 'runtests' build

from buildbot.schedulers.basic import SingleBranchScheduler
from buildbot.schedulers.forcesched import ForceScheduler
from buildbot.changes import filter
c['schedulers'] = []

# Create builders to generate one target using all assigned toolchains
release_builder_name = "BuildRelease"
builder_names = [release_builder_name]
for target_name, toolchains in OFFICIAL_MBED_LIBRARY_BUILD:
    builder_name = "All_TC_%s" % target_name
    builder_names.append(builder_name)
c['schedulers'].append(ForceScheduler(name="force", builderNames=builder_names))

####### BUILDERS

# The 'builders' list defines the Builders, which tell Buildbot how to perform a build:
# what steps, and which slaves can execute them.  Note that any particular build will
# only take place on one slave.

from buildbot.process.factory import BuildFactory
from buildbot.steps.source.git import Git
from buildbot.steps.shell import ShellCommand
from buildbot.process.buildstep import LogLineObserver
import buildbot.status.results
import re
import pprint

class TestCommand(ShellCommand):
    failedTestsCount = 0    # FAIL
    passedTestsCount = 0    # OK
    errorsTestsCount = 0    # ERROR
    undefsTestsCount = 0    # UNDEF
    testsResults = []

    def __init__(self, stage=None,module=None, moduleset=None, **kwargs):
        ShellCommand.__init__(self, **kwargs)
        self.failedTestsCount = 0
        self.passedTestsCount = 0
        self.errorsTestsCount = 0
        self.tracebackPyCount = 0
        self.testsResults = []
        testFailuresObserver = UnitTestsObserver ()
        self.addLogObserver('stdio', testFailuresObserver)

    def createSummary(self, log):
        if self.failedTestsCount >= 0 or self.passedTestsCount >= 0 or self.errorsTestsCount >= 0 or self.undefsTestsCount >= 0:
            self.addHTMLLog ('tests summary', self.createTestsSummary())

    def getText(self, cmd, results):
        text = ShellCommand.getText(self, cmd, results)
        text.append("OK: "    + str(self.passedTestsCount))
        text.append("FAIL: "  + str(self.failedTestsCount))
        text.append("ERROR: " + str(self.errorsTestsCount))
        text.append("UNDEF: " + str(self.undefsTestsCount))
        text.append("Traceback: " + str(self.tracebackPyCount))
        return text

    def evaluateCommand(self, cmd):
        if self.failedTestsCount > 0:
            return buildbot.status.results.WARNINGS
        elif self.errorsTestsCount > 0 or self.undefsTestsCount > 0 or self.tracebackPyCount > 0:
            return buildbot.status.results.FAILURE
        return buildbot.status.results.SUCCESS

    def find_unique_tc_result_value(self, index):
        """ Get unique values from each row in data parameter """
        result = []
        for tc_result_list in self.testsResults:
            if tc_result_list[index] not in result:
                result.append(tc_result_list[index])
        return result

    def html_view_test_result(self, targets, tests, toolchain):
        """ Generates simple result table """
        COLOR_OK      = "LimeGreen"
        COLOR_FAIL    = "LightCoral"
        COLOR_UNDEF   = "LightSlateGray"
        COLOR_NEUTRAL = "Silver"

        STATUS_COLORS = { "OK"    : COLOR_OK,
                          "FAIL"  : COLOR_FAIL,
                          "UNDEF" : COLOR_UNDEF}

        result = "<table>"
        result += "<tr valign='center'><td align='center'><b>" + toolchain + "</b></td>"
        for test in tests:
            result += "<td align='center'>" + test + "<br></td>"
        result += "</tr>"

        for target in targets:
            result += "<tr><td width='110px'><br>" + target + "<br></td>"
            for test in tests:
                for tc_result_list in self.testsResults:
                    if tc_result_list[1] == target and tc_result_list[2] == toolchain and tc_result_list[3] == test:
                        status = tc_result_list[4]
                        bgcolor = STATUS_COLORS[status]
                        result += "<td align='center' bgcolor='" + bgcolor + "'>" + status + "</td>"
                        break;
                else:
                    result += "<td bgcolor='" + COLOR_NEUTRAL + "'></td>"
            result += "</tr>"
        result += "</table>"
        return result

    def createTestsSummary (self):
        targets = self.find_unique_tc_result_value(1)
        toolchains = self.find_unique_tc_result_value(2)
        tests = self.find_unique_tc_result_value(3)
        html_result = ""
        for toolchain in toolchains:
            html_result += self.html_view_test_result(targets, tests, toolchain)
            html_result += "<br>"
        return html_result


class UnitTestsObserver(LogLineObserver):
    reGroupTestResult = []
    reGroupPyResult = []

    def __init__(self):
        LogLineObserver.__init__(self)
        if len(self.reGroupTestResult) == 0:
            self.reGroupTestResult.append(re.compile("^(\w+Test)::(\w+)::(\w+)::(\w+)::.* \[(\w+)\] in (\d+\.\d+) of (\d+) sec[\r\n]*$"))

    def outLineReceived(self, line):
        matched = False
        for r in self.reGroupTestResult:
            result = r.match(line)
            if result:
                self.step.testsResults.append(result.groups())
                if result.group(5) == 'OK':
                    self.step.passedTestsCount += 1
                elif result.group(5) == 'FAIL':
                    self.step.failedTestsCount += 1
                elif result.group(5) == 'UNDEF':
                    self.step.undefsTestsCount += 1
                elif result.group(5) == 'ERROR':
                    self.step.errorsTestsCount += 1
                matched = True


class BuildCommand(ShellCommand):
    warningsCount = 0    # [Warning]
    errorsCount = 0      # [Error]
    testsResults = []

    def __init__(self, stage=None,module=None, moduleset=None, **kwargs):
        ShellCommand.__init__(self, **kwargs)
        self.warningsCount = 0
        self.errorsCount = 0
        self.testsResults = []
        buildProcessObserver = BuildObserver ()
        self.addLogObserver('stdio', buildProcessObserver)

    def createSummary(self, log):
        if self.warningsCount >= 0 or self.errorsCount >= 0:
            self.addHTMLLog ('tests summary', self.createTestsSummary())

    def getText(self, cmd, results):
        text = ShellCommand.getText(self, cmd, results)
        if self.warningsCount > 0 or self.errorsCount > 0:
            text.append("warnings: " + str(self.warningsCount))
            text.append("errors: " + str(self.errorsCount))
        return text

    def evaluateCommand(self, cmd):
        if self.warningsCount > 0:
            return buildbot.status.results.WARNINGS
        elif self.errorsCount > 0:
            return buildbot.status.results.FAILURE
        else:
            return buildbot.status.results.SUCCESS

    def createTestsSummary (self):
            # Create a string with your html report and return it
            html = "<h4>Report</h4><table>"
            #for result in self.testsResults:
            html += "</table>"
            return html

class BuildObserver(LogLineObserver):
    regroupresult = []

    def __init__(self):
        LogLineObserver.__init__(self)
        if len(self.regroupresult) == 0:
            self.regroupresult.append(re.compile("^\[([Ww]arning)\] (.*)"))
            self.regroupresult.append(re.compile("^\[([Ee]rror)\] (.*)"))

    def outLineReceived(self, line):
        matched = False
        for r in self.regroupresult:
            result = r.match(line)
            if result:
                self.step.testsResults.append(result.groups())
                if result.group(1) == 'Warning':
                    self.step.warningsCount += 1
                elif result.group(1) == 'Error':
                    self.step.errorsCount += 1
                matched = True
        #if not matched:
            # [Future-Dev] Other check...


####### BUILDERS - mbed project
git_clone = Git(repourl='https://github.com/mbedmicro/mbed.git', mode='incremental')

# create the build factory for mbed and add the steps to it
from buildbot.config import BuilderConfig

c['builders'] = []

copy_mbed_settings = ShellCommand(name = "copy mbed_settings.py",
                                     command = "cp ../mbed_settings.py mbed_settings.py",
                                     haltOnFailure = True,
                                     description = "Copy mbed_settings.py")

mbed_build_release = BuildFactory()
mbed_build_release.addStep(git_clone)
mbed_build_release.addStep(copy_mbed_settings)

for target_name, toolchains in OFFICIAL_MBED_LIBRARY_BUILD:
    builder_name = "All_TC_%s" % target_name
    mbed_build = BuildFactory()
    mbed_build.addStep(git_clone)
    mbed_build.addStep(copy_mbed_settings)
    # Adding all chains for target
    for toolchain in toolchains:
        build_py = BuildCommand(name = "Build %s using %s"  % (target_name, toolchain),
                               command = "python tools/build.py -m %s -t %s" % (target_name, toolchain),
                               haltOnFailure = True,
                               warnOnWarnings = True,
                               description = "Building %s using %s"  % (target_name, toolchain),
                               descriptionDone = "Built %s using %s"  % (target_name, toolchain))

        mbed_build.addStep(build_py)
        mbed_build_release.addStep(build_py)    # For build release we need all toolchains

    if target_name in OFFICIAL_MBED_TESTBED_SUPPORTED_HARDWARE:
        copy_example_test_spec_json = ShellCommand(name = "Copy example_test_spec.json",
                                                   command = "cp ../example_test_spec.json tools/data/example_test_spec.json",
                                                   haltOnFailure = True,
                                                   description = "Copy example_test_spec.json")

        autotest_py = ShellCommand(name = "Running autotest.py for %s" % (target_name),
                                   command = "python tools/autotest.py tools/data/example_test_spec.json",
                                   haltOnFailure = True,
                                   description = "Running autotest.py")

        mbed_build.addStep(copy_example_test_spec_json)
        mbed_build.addStep(autotest_py)

        # Add builder with steps for each toolchain
        c['builders'].append(BuilderConfig(name=builder_name,
                             slavenames=["example-slave-%s" % (target_name)],
                             factory=mbed_build))
    else:
        # Add builder with steps for each toolchain
        c['builders'].append(BuilderConfig(name=builder_name,
                             slavenames=["example-slave"],
                             factory=mbed_build))

# copy_example_test_spec_json = ShellCommand(name = "Copy example_test_spec.json",
                                           # command = "cp ../example_test_spec.json tools/data/example_test_spec.json",
                                           # haltOnFailure = True,
                                           # description = "Copy example_test_spec.json")

singletest_py = TestCommand(name = "Running Target Tests",
                            command = "python tools/singletest.py -i tools/test_spec.json -M tools/muts_all.json",
                            haltOnFailure = True,
                            warnOnWarnings = True,
                            description = "Running Target Tests",
                            descriptionDone = "Target Testing Finished")

mbed_build_release.addStep(singletest_py)
# Release build collects all building toolchains
c['builders'].append(BuilderConfig(name=release_builder_name,
                     slavenames=["example-slave"],
                     factory=mbed_build_release))

####### STATUS TARGETS

# 'status' is a list of Status Targets. The results of each build will be
# pushed to these targets. buildbot/status/*.py has a variety to choose from,
# including web pages, email senders, and IRC bots.

c['status'] = []

from buildbot.status import html
from buildbot.status.web import authz, auth

authz_cfg=authz.Authz(
    # change any of these to True to enable; see the manual for more
    # options
    auth=auth.BasicAuth([("pyflakes","pyflakes")]),
    gracefulShutdown = False,
    forceBuild = 'auth', # use this to test your slave once it is set up
    forceAllBuilds = True,
    pingBuilder = True,
    stopBuild = True,
    stopAllBuilds = True,
    cancelPendingBuild = True,
)
c['status'].append(html.WebStatus(http_port=8010, authz=authz_cfg, order_console_by_time=True))

####### PROJECT IDENTITY

# the 'title' string will appear at the top of this buildbot
# installation's html.WebStatus home page (linked to the
# 'titleURL') and is embedded in the title of the waterfall HTML page.

c['title'] = "Green Tea"
c['titleURL'] = ""

# the 'buildbotURL' string should point to the location where the buildbot's
# internal web server (usually the html.WebStatus page) is visible. This
# typically uses the port number set in the Waterfall 'status' entry, but
# with an externally-visible host name which the buildbot cannot figure out
# without some help.

c['buildbotURL'] = "http://localhost:8010/"

####### DB URL

c['db'] = {
    # This specifies what database buildbot uses to store its state.  You can leave
    # this at its default for all but the largest installations.
    'db_url' : "sqlite:///state.sqlite",
    # 'db_url' : "mysql://buildbot:123456@localhost/buildbot_mbed?max_idle=300",
}