Greg Steiert / pegasus_dev

Development mbed library for MAX32630FTHR

Dependents:   blinky_max32630fthr

drivers/PortOut.h@3:1198227e6421, 2016-12-16 (annotated)

Committer:
switches
Date:
Fri Dec 16 16:27:57 2016 +0000
Revision:
3:1198227e6421
Parent:
0:5c4d7b2438d3 
Changed ADC scale for MAX32625 platforms to 1.2V full scale to match MAX32630 platforms

Who changed what in which revision?

UserRevisionLine numberNew contents of line
switches 0:5c4d7b2438d3 1 /* mbed Microcontroller Library
switches 0:5c4d7b2438d3 2 * Copyright (c) 2006-2013 ARM Limited
switches 0:5c4d7b2438d3 3 *
switches 0:5c4d7b2438d3 4 * Licensed under the Apache License, Version 2.0 (the "License");
switches 0:5c4d7b2438d3 5 * you may not use this file except in compliance with the License.
switches 0:5c4d7b2438d3 6 * You may obtain a copy of the License at
switches 0:5c4d7b2438d3 7 *
switches 0:5c4d7b2438d3 8 * http://www.apache.org/licenses/LICENSE-2.0
switches 0:5c4d7b2438d3 9 *
switches 0:5c4d7b2438d3 10 * Unless required by applicable law or agreed to in writing, software
switches 0:5c4d7b2438d3 11 * distributed under the License is distributed on an "AS IS" BASIS,
switches 0:5c4d7b2438d3 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
switches 0:5c4d7b2438d3 13 * See the License for the specific language governing permissions and
switches 0:5c4d7b2438d3 14 * limitations under the License.
switches 0:5c4d7b2438d3 15 */
switches 0:5c4d7b2438d3 16 #ifndef MBED_PORTOUT_H
switches 0:5c4d7b2438d3 17 #define MBED_PORTOUT_H
switches 0:5c4d7b2438d3 18
switches 0:5c4d7b2438d3 19 #include "platform/platform.h"
switches 0:5c4d7b2438d3 20
switches 0:5c4d7b2438d3 21 #if DEVICE_PORTOUT
switches 0:5c4d7b2438d3 22
switches 0:5c4d7b2438d3 23 #include "hal/port_api.h"
switches 0:5c4d7b2438d3 24 #include "platform/critical.h"
switches 0:5c4d7b2438d3 25
switches 0:5c4d7b2438d3 26 namespace mbed {
switches 0:5c4d7b2438d3 27 /** \addtogroup drivers */
switches 0:5c4d7b2438d3 28 /** @{*/
switches 0:5c4d7b2438d3 29 /** A multiple pin digital out
switches 0:5c4d7b2438d3 30 *
switches 0:5c4d7b2438d3 31 * @Note Synchronization level: Interrupt safe
switches 0:5c4d7b2438d3 32 *
switches 0:5c4d7b2438d3 33 * Example:
switches 0:5c4d7b2438d3 34 * @code
switches 0:5c4d7b2438d3 35 * // Toggle all four LEDs
switches 0:5c4d7b2438d3 36 *
switches 0:5c4d7b2438d3 37 * #include "mbed.h"
switches 0:5c4d7b2438d3 38 *
switches 0:5c4d7b2438d3 39 * // LED1 = P1.18 LED2 = P1.20 LED3 = P1.21 LED4 = P1.23
switches 0:5c4d7b2438d3 40 * #define LED_MASK 0x00B40000
switches 0:5c4d7b2438d3 41 *
switches 0:5c4d7b2438d3 42 * PortOut ledport(Port1, LED_MASK);
switches 0:5c4d7b2438d3 43 *
switches 0:5c4d7b2438d3 44 * int main() {
switches 0:5c4d7b2438d3 45 * while(1) {
switches 0:5c4d7b2438d3 46 * ledport = LED_MASK;
switches 0:5c4d7b2438d3 47 * wait(1);
switches 0:5c4d7b2438d3 48 * ledport = 0;
switches 0:5c4d7b2438d3 49 * wait(1);
switches 0:5c4d7b2438d3 50 * }
switches 0:5c4d7b2438d3 51 * }
switches 0:5c4d7b2438d3 52 * @endcode
switches 0:5c4d7b2438d3 53 */
switches 0:5c4d7b2438d3 54 class PortOut {
switches 0:5c4d7b2438d3 55 public:
switches 0:5c4d7b2438d3 56
switches 0:5c4d7b2438d3 57 /** Create an PortOut, connected to the specified port
switches 0:5c4d7b2438d3 58 *
switches 0:5c4d7b2438d3 59 * @param port Port to connect to (Port0-Port5)
switches 0:5c4d7b2438d3 60 * @param mask A bitmask to identify which bits in the port should be included (0 - ignore)
switches 0:5c4d7b2438d3 61 */
switches 0:5c4d7b2438d3 62 PortOut(PortName port, int mask = 0xFFFFFFFF) {
switches 0:5c4d7b2438d3 63 core_util_critical_section_enter();
switches 0:5c4d7b2438d3 64 port_init(&_port, port, mask, PIN_OUTPUT);
switches 0:5c4d7b2438d3 65 core_util_critical_section_exit();
switches 0:5c4d7b2438d3 66 }
switches 0:5c4d7b2438d3 67
switches 0:5c4d7b2438d3 68 /** Write the value to the output port
switches 0:5c4d7b2438d3 69 *
switches 0:5c4d7b2438d3 70 * @param value An integer specifying a bit to write for every corresponding PortOut pin
switches 0:5c4d7b2438d3 71 */
switches 0:5c4d7b2438d3 72 void write(int value) {
switches 0:5c4d7b2438d3 73 port_write(&_port, value);
switches 0:5c4d7b2438d3 74 }
switches 0:5c4d7b2438d3 75
switches 0:5c4d7b2438d3 76 /** Read the value currently output on the port
switches 0:5c4d7b2438d3 77 *
switches 0:5c4d7b2438d3 78 * @returns
switches 0:5c4d7b2438d3 79 * An integer with each bit corresponding to associated PortOut pin setting
switches 0:5c4d7b2438d3 80 */
switches 0:5c4d7b2438d3 81 int read() {
switches 0:5c4d7b2438d3 82 return port_read(&_port);
switches 0:5c4d7b2438d3 83 }
switches 0:5c4d7b2438d3 84
switches 0:5c4d7b2438d3 85 /** A shorthand for write()
switches 0:5c4d7b2438d3 86 */
switches 0:5c4d7b2438d3 87 PortOut& operator= (int value) {
switches 0:5c4d7b2438d3 88 write(value);
switches 0:5c4d7b2438d3 89 return *this;
switches 0:5c4d7b2438d3 90 }
switches 0:5c4d7b2438d3 91
switches 0:5c4d7b2438d3 92 PortOut& operator= (PortOut& rhs) {
switches 0:5c4d7b2438d3 93 write(rhs.read());
switches 0:5c4d7b2438d3 94 return *this;
switches 0:5c4d7b2438d3 95 }
switches 0:5c4d7b2438d3 96
switches 0:5c4d7b2438d3 97 /** A shorthand for read()
switches 0:5c4d7b2438d3 98 */
switches 0:5c4d7b2438d3 99 operator int() {
switches 0:5c4d7b2438d3 100 return read();
switches 0:5c4d7b2438d3 101 }
switches 0:5c4d7b2438d3 102
switches 0:5c4d7b2438d3 103 private:
switches 0:5c4d7b2438d3 104 port_t _port;
switches 0:5c4d7b2438d3 105 };
switches 0:5c4d7b2438d3 106
switches 0:5c4d7b2438d3 107 } // namespace mbed
switches 0:5c4d7b2438d3 108
switches 0:5c4d7b2438d3 109 #endif
switches 0:5c4d7b2438d3 110
switches 0:5c4d7b2438d3 111 #endif
switches 0:5c4d7b2438d3 112
switches 0:5c4d7b2438d3 113 /** @}*/