Development mbed library for MAX32630FTHR

Dependents:   blinky_max32630fthr

Committer:
switches
Date:
Fri Dec 16 16:27:57 2016 +0000
Revision:
3:1198227e6421
Parent:
0:5c4d7b2438d3
Changed ADC scale for MAX32625 platforms to 1.2V full scale to match MAX32630 platforms

Who changed what in which revision?

UserRevisionLine numberNew contents of line
switches 0:5c4d7b2438d3 1 /* mbed Microcontroller Library
switches 0:5c4d7b2438d3 2 * Copyright (c) 2006-2015 ARM Limited
switches 0:5c4d7b2438d3 3 *
switches 0:5c4d7b2438d3 4 * Licensed under the Apache License, Version 2.0 (the "License");
switches 0:5c4d7b2438d3 5 * you may not use this file except in compliance with the License.
switches 0:5c4d7b2438d3 6 * You may obtain a copy of the License at
switches 0:5c4d7b2438d3 7 *
switches 0:5c4d7b2438d3 8 * http://www.apache.org/licenses/LICENSE-2.0
switches 0:5c4d7b2438d3 9 *
switches 0:5c4d7b2438d3 10 * Unless required by applicable law or agreed to in writing, software
switches 0:5c4d7b2438d3 11 * distributed under the License is distributed on an "AS IS" BASIS,
switches 0:5c4d7b2438d3 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
switches 0:5c4d7b2438d3 13 * See the License for the specific language governing permissions and
switches 0:5c4d7b2438d3 14 * limitations under the License.
switches 0:5c4d7b2438d3 15 */
switches 0:5c4d7b2438d3 16 #ifndef MBED_I2C_H
switches 0:5c4d7b2438d3 17 #define MBED_I2C_H
switches 0:5c4d7b2438d3 18
switches 0:5c4d7b2438d3 19 #include "platform/platform.h"
switches 0:5c4d7b2438d3 20
switches 0:5c4d7b2438d3 21 #if DEVICE_I2C
switches 0:5c4d7b2438d3 22
switches 0:5c4d7b2438d3 23 #include "hal/i2c_api.h"
switches 0:5c4d7b2438d3 24 #include "platform/SingletonPtr.h"
switches 0:5c4d7b2438d3 25 #include "platform/PlatformMutex.h"
switches 0:5c4d7b2438d3 26
switches 0:5c4d7b2438d3 27 #if DEVICE_I2C_ASYNCH
switches 0:5c4d7b2438d3 28 #include "platform/CThunk.h"
switches 0:5c4d7b2438d3 29 #include "hal/dma_api.h"
switches 0:5c4d7b2438d3 30 #include "platform/FunctionPointer.h"
switches 0:5c4d7b2438d3 31 #endif
switches 0:5c4d7b2438d3 32
switches 0:5c4d7b2438d3 33 namespace mbed {
switches 0:5c4d7b2438d3 34 /** \addtogroup drivers */
switches 0:5c4d7b2438d3 35 /** @{*/
switches 0:5c4d7b2438d3 36
switches 0:5c4d7b2438d3 37 /** An I2C Master, used for communicating with I2C slave devices
switches 0:5c4d7b2438d3 38 *
switches 0:5c4d7b2438d3 39 * @Note Synchronization level: Thread safe
switches 0:5c4d7b2438d3 40 *
switches 0:5c4d7b2438d3 41 * Example:
switches 0:5c4d7b2438d3 42 * @code
switches 0:5c4d7b2438d3 43 * // Read from I2C slave at address 0x62
switches 0:5c4d7b2438d3 44 *
switches 0:5c4d7b2438d3 45 * #include "mbed.h"
switches 0:5c4d7b2438d3 46 *
switches 0:5c4d7b2438d3 47 * I2C i2c(p28, p27);
switches 0:5c4d7b2438d3 48 *
switches 0:5c4d7b2438d3 49 * int main() {
switches 0:5c4d7b2438d3 50 * int address = 0x62;
switches 0:5c4d7b2438d3 51 * char data[2];
switches 0:5c4d7b2438d3 52 * i2c.read(address, data, 2);
switches 0:5c4d7b2438d3 53 * }
switches 0:5c4d7b2438d3 54 * @endcode
switches 0:5c4d7b2438d3 55 */
switches 0:5c4d7b2438d3 56 class I2C {
switches 0:5c4d7b2438d3 57
switches 0:5c4d7b2438d3 58 public:
switches 0:5c4d7b2438d3 59 enum RxStatus {
switches 0:5c4d7b2438d3 60 NoData,
switches 0:5c4d7b2438d3 61 MasterGeneralCall,
switches 0:5c4d7b2438d3 62 MasterWrite,
switches 0:5c4d7b2438d3 63 MasterRead
switches 0:5c4d7b2438d3 64 };
switches 0:5c4d7b2438d3 65
switches 0:5c4d7b2438d3 66 enum Acknowledge {
switches 0:5c4d7b2438d3 67 NoACK = 0,
switches 0:5c4d7b2438d3 68 ACK = 1
switches 0:5c4d7b2438d3 69 };
switches 0:5c4d7b2438d3 70
switches 0:5c4d7b2438d3 71 /** Create an I2C Master interface, connected to the specified pins
switches 0:5c4d7b2438d3 72 *
switches 0:5c4d7b2438d3 73 * @param sda I2C data line pin
switches 0:5c4d7b2438d3 74 * @param scl I2C clock line pin
switches 0:5c4d7b2438d3 75 */
switches 0:5c4d7b2438d3 76 I2C(PinName sda, PinName scl);
switches 0:5c4d7b2438d3 77
switches 0:5c4d7b2438d3 78 /** Set the frequency of the I2C interface
switches 0:5c4d7b2438d3 79 *
switches 0:5c4d7b2438d3 80 * @param hz The bus frequency in hertz
switches 0:5c4d7b2438d3 81 */
switches 0:5c4d7b2438d3 82 void frequency(int hz);
switches 0:5c4d7b2438d3 83
switches 0:5c4d7b2438d3 84 /** Read from an I2C slave
switches 0:5c4d7b2438d3 85 *
switches 0:5c4d7b2438d3 86 * Performs a complete read transaction. The bottom bit of
switches 0:5c4d7b2438d3 87 * the address is forced to 1 to indicate a read.
switches 0:5c4d7b2438d3 88 *
switches 0:5c4d7b2438d3 89 * @param address 8-bit I2C slave address [ addr | 1 ]
switches 0:5c4d7b2438d3 90 * @param data Pointer to the byte-array to read data in to
switches 0:5c4d7b2438d3 91 * @param length Number of bytes to read
switches 0:5c4d7b2438d3 92 * @param repeated Repeated start, true - don't send stop at end
switches 0:5c4d7b2438d3 93 *
switches 0:5c4d7b2438d3 94 * @returns
switches 0:5c4d7b2438d3 95 * 0 on success (ack),
switches 0:5c4d7b2438d3 96 * non-0 on failure (nack)
switches 0:5c4d7b2438d3 97 */
switches 0:5c4d7b2438d3 98 int read(int address, char *data, int length, bool repeated = false);
switches 0:5c4d7b2438d3 99
switches 0:5c4d7b2438d3 100 /** Read a single byte from the I2C bus
switches 0:5c4d7b2438d3 101 *
switches 0:5c4d7b2438d3 102 * @param ack indicates if the byte is to be acknowledged (1 = acknowledge)
switches 0:5c4d7b2438d3 103 *
switches 0:5c4d7b2438d3 104 * @returns
switches 0:5c4d7b2438d3 105 * the byte read
switches 0:5c4d7b2438d3 106 */
switches 0:5c4d7b2438d3 107 int read(int ack);
switches 0:5c4d7b2438d3 108
switches 0:5c4d7b2438d3 109 /** Write to an I2C slave
switches 0:5c4d7b2438d3 110 *
switches 0:5c4d7b2438d3 111 * Performs a complete write transaction. The bottom bit of
switches 0:5c4d7b2438d3 112 * the address is forced to 0 to indicate a write.
switches 0:5c4d7b2438d3 113 *
switches 0:5c4d7b2438d3 114 * @param address 8-bit I2C slave address [ addr | 0 ]
switches 0:5c4d7b2438d3 115 * @param data Pointer to the byte-array data to send
switches 0:5c4d7b2438d3 116 * @param length Number of bytes to send
switches 0:5c4d7b2438d3 117 * @param repeated Repeated start, true - do not send stop at end
switches 0:5c4d7b2438d3 118 *
switches 0:5c4d7b2438d3 119 * @returns
switches 0:5c4d7b2438d3 120 * 0 on success (ack),
switches 0:5c4d7b2438d3 121 * non-0 on failure (nack)
switches 0:5c4d7b2438d3 122 */
switches 0:5c4d7b2438d3 123 int write(int address, const char *data, int length, bool repeated = false);
switches 0:5c4d7b2438d3 124
switches 0:5c4d7b2438d3 125 /** Write single byte out on the I2C bus
switches 0:5c4d7b2438d3 126 *
switches 0:5c4d7b2438d3 127 * @param data data to write out on bus
switches 0:5c4d7b2438d3 128 *
switches 0:5c4d7b2438d3 129 * @returns
switches 0:5c4d7b2438d3 130 * '1' if an ACK was received,
switches 0:5c4d7b2438d3 131 * '0' otherwise
switches 0:5c4d7b2438d3 132 */
switches 0:5c4d7b2438d3 133 int write(int data);
switches 0:5c4d7b2438d3 134
switches 0:5c4d7b2438d3 135 /** Creates a start condition on the I2C bus
switches 0:5c4d7b2438d3 136 */
switches 0:5c4d7b2438d3 137
switches 0:5c4d7b2438d3 138 void start(void);
switches 0:5c4d7b2438d3 139
switches 0:5c4d7b2438d3 140 /** Creates a stop condition on the I2C bus
switches 0:5c4d7b2438d3 141 */
switches 0:5c4d7b2438d3 142 void stop(void);
switches 0:5c4d7b2438d3 143
switches 0:5c4d7b2438d3 144 /** Acquire exclusive access to this I2C bus
switches 0:5c4d7b2438d3 145 */
switches 0:5c4d7b2438d3 146 virtual void lock(void);
switches 0:5c4d7b2438d3 147
switches 0:5c4d7b2438d3 148 /** Release exclusive access to this I2C bus
switches 0:5c4d7b2438d3 149 */
switches 0:5c4d7b2438d3 150 virtual void unlock(void);
switches 0:5c4d7b2438d3 151
switches 0:5c4d7b2438d3 152 virtual ~I2C() {
switches 0:5c4d7b2438d3 153 // Do nothing
switches 0:5c4d7b2438d3 154 }
switches 0:5c4d7b2438d3 155
switches 0:5c4d7b2438d3 156 #if DEVICE_I2C_ASYNCH
switches 0:5c4d7b2438d3 157
switches 0:5c4d7b2438d3 158 /** Start non-blocking I2C transfer.
switches 0:5c4d7b2438d3 159 *
switches 0:5c4d7b2438d3 160 * @param address 8/10 bit I2c slave address
switches 0:5c4d7b2438d3 161 * @param tx_buffer The TX buffer with data to be transfered
switches 0:5c4d7b2438d3 162 * @param tx_length The length of TX buffer in bytes
switches 0:5c4d7b2438d3 163 * @param rx_buffer The RX buffer which is used for received data
switches 0:5c4d7b2438d3 164 * @param rx_length The length of RX buffer in bytes
switches 0:5c4d7b2438d3 165 * @param event The logical OR of events to modify
switches 0:5c4d7b2438d3 166 * @param callback The event callback function
switches 0:5c4d7b2438d3 167 * @param repeated Repeated start, true - do not send stop at end
switches 0:5c4d7b2438d3 168 * @return Zero if the transfer has started, or -1 if I2C peripheral is busy
switches 0:5c4d7b2438d3 169 */
switches 0:5c4d7b2438d3 170 int transfer(int address, const char *tx_buffer, int tx_length, char *rx_buffer, int rx_length, const event_callback_t& callback, int event = I2C_EVENT_TRANSFER_COMPLETE, bool repeated = false);
switches 0:5c4d7b2438d3 171
switches 0:5c4d7b2438d3 172 /** Abort the on-going I2C transfer
switches 0:5c4d7b2438d3 173 */
switches 0:5c4d7b2438d3 174 void abort_transfer();
switches 0:5c4d7b2438d3 175 protected:
switches 0:5c4d7b2438d3 176 void irq_handler_asynch(void);
switches 0:5c4d7b2438d3 177 event_callback_t _callback;
switches 0:5c4d7b2438d3 178 CThunk<I2C> _irq;
switches 0:5c4d7b2438d3 179 DMAUsage _usage;
switches 0:5c4d7b2438d3 180 #endif
switches 0:5c4d7b2438d3 181
switches 0:5c4d7b2438d3 182 protected:
switches 0:5c4d7b2438d3 183 void aquire();
switches 0:5c4d7b2438d3 184
switches 0:5c4d7b2438d3 185 i2c_t _i2c;
switches 0:5c4d7b2438d3 186 static I2C *_owner;
switches 0:5c4d7b2438d3 187 int _hz;
switches 0:5c4d7b2438d3 188 static SingletonPtr<PlatformMutex> _mutex;
switches 0:5c4d7b2438d3 189 };
switches 0:5c4d7b2438d3 190
switches 0:5c4d7b2438d3 191 } // namespace mbed
switches 0:5c4d7b2438d3 192
switches 0:5c4d7b2438d3 193 #endif
switches 0:5c4d7b2438d3 194
switches 0:5c4d7b2438d3 195 #endif
switches 0:5c4d7b2438d3 196
switches 0:5c4d7b2438d3 197 /** @}*/