Maxim mbed development library
Dependents: MAX34417_demo MAXREFDES1265 MAXREFDES1265
Fork of mbed-dev by
Functions | |
void | pwmout_init (pwmout_t *obj, PinName pin) |
Initialize the pwm out peripheral and configure the pin. | |
void | pwmout_free (pwmout_t *obj) |
Deinitialize the pwmout object. | |
void | pwmout_write (pwmout_t *obj, float percent) |
Set the output duty-cycle in range <0.0f, 1.0f> | |
float | pwmout_read (pwmout_t *obj) |
Read the current float-point output duty-cycle. | |
void | pwmout_period (pwmout_t *obj, float seconds) |
Set the PWM period specified in seconds, keeping the duty cycle the same. | |
void | pwmout_period_ms (pwmout_t *obj, int ms) |
Set the PWM period specified in miliseconds, keeping the duty cycle the same. | |
void | pwmout_period_us (pwmout_t *obj, int us) |
Set the PWM period specified in microseconds, keeping the duty cycle the same. | |
void | pwmout_pulsewidth (pwmout_t *obj, float seconds) |
Set the PWM pulsewidth specified in seconds, keeping the period the same. | |
void | pwmout_pulsewidth_ms (pwmout_t *obj, int ms) |
Set the PWM pulsewidth specified in miliseconds, keeping the period the same. | |
void | pwmout_pulsewidth_us (pwmout_t *obj, int us) |
Set the PWM pulsewidth specified in microseconds, keeping the period the same. |
Function Documentation
void pwmout_free | ( | pwmout_t * | obj ) |
Deinitialize the pwmout object.
- Parameters:
-
obj The pwmout object
void pwmout_init | ( | pwmout_t * | obj, |
PinName | pin | ||
) |
Initialize the pwm out peripheral and configure the pin.
- Parameters:
-
obj The pwmout object to initialize pin The pwmout pin to initialize
void pwmout_period | ( | pwmout_t * | obj, |
float | seconds | ||
) |
Set the PWM period specified in seconds, keeping the duty cycle the same.
Periods smaller than microseconds (the lowest resolution) are set to zero.
- Parameters:
-
obj The pwmout object seconds The floating-point seconds period
void pwmout_period_ms | ( | pwmout_t * | obj, |
int | ms | ||
) |
Set the PWM period specified in miliseconds, keeping the duty cycle the same.
- Parameters:
-
obj The pwmout object ms The milisecond period
void pwmout_period_us | ( | pwmout_t * | obj, |
int | us | ||
) |
Set the PWM period specified in microseconds, keeping the duty cycle the same.
- Parameters:
-
obj The pwmout object us The microsecond period
void pwmout_pulsewidth | ( | pwmout_t * | obj, |
float | seconds | ||
) |
Set the PWM pulsewidth specified in seconds, keeping the period the same.
- Parameters:
-
obj The pwmout object seconds The floating-point pulsewidth in seconds
void pwmout_pulsewidth_ms | ( | pwmout_t * | obj, |
int | ms | ||
) |
Set the PWM pulsewidth specified in miliseconds, keeping the period the same.
- Parameters:
-
obj The pwmout object ms The floating-point pulsewidth in miliseconds
void pwmout_pulsewidth_us | ( | pwmout_t * | obj, |
int | us | ||
) |
Set the PWM pulsewidth specified in microseconds, keeping the period the same.
- Parameters:
-
obj The pwmout object us The floating-point pulsewidth in microseconds
float pwmout_read | ( | pwmout_t * | obj ) |
Read the current float-point output duty-cycle.
- Parameters:
-
obj The pwmout object
- Returns:
- A floating-point output duty-cycle
void pwmout_write | ( | pwmout_t * | obj, |
float | percent | ||
) |
Set the output duty-cycle in range <0.0f, 1.0f>
Value 0.0f represents 0 percentage, 1.0f represents 100 percent.
- Parameters:
-
obj The pwmout object percent The floating-point percentage number
Generated on Tue Jul 12 2022 20:41:23 by 1.7.2