Diff: targets/hal/TARGET_WIZNET/TARGET_W7500x/objects.h

Revision:

0:9b334a45a8ff

Child:

144:ef7eb2e8f9f7

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_WIZNET/TARGET_W7500x/objects.h	Thu Oct 01 15:25:22 2015 +0300
@@ -0,0 +1,105 @@
+/* mbed Microcontroller Library 
+ *******************************************************************************
+ * Copyright (c) 2015 WIZnet Co.,Ltd. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of ARM Limited nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+ 
+#ifndef MBED_OBJECTS_H
+#define MBED_OBJECTS_H
+
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+#include "PortNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct gpio_irq_s {
+    IRQn_Type irq_n;
+    uint32_t event;
+    PinName pin;
+    uint32_t pin_index;
+    uint32_t pin_num;
+    uint32_t port_num;
+    uint32_t rise_null;
+    uint32_t fall_null;
+};
+
+struct port_s {
+    PortName port;
+    uint32_t mask;
+    PinDirection direction;
+    __IO uint32_t *reg_in;
+    __IO uint32_t *reg_out;
+};
+
+struct analogin_s {
+    ADCName adc;
+    PinName pin;
+};
+
+struct serial_s {
+    UARTName uart;
+    int index; // Used by irq
+    uint32_t baudrate;
+    uint32_t databits;
+    uint32_t stopbits;
+    uint32_t parity;
+    PinName pin_tx;
+    PinName pin_rx;
+};
+
+struct spi_s {
+	SSP_TypeDef *spi;
+};
+
+struct i2c_s {
+    I2CName I2Cx;
+    PinName sda;
+    PinName scl; 
+    uint16_t ADDRESS;
+    uint16_t is_setAddress;
+};
+
+struct pwmout_s {
+    PWM_CHn_TypeDef * PWM_CHx;
+    PinName pin;
+    uint32_t period;
+    uint32_t pulse;
+    uint32_t PrescalerValue;
+};
+
+#include "gpio_object.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif