Mini Project 10: Displaying stuff from day 7
Dependencies: DmTouch_UniGraphic UniGraphic mbed
Diff: main.cpp
- Revision:
- 10:ee5708e7a36a
- Parent:
- 9:0f4c86e7218a
- Child:
- 11:482a9abbc448
diff -r 0f4c86e7218a -r ee5708e7a36a main.cpp --- a/main.cpp Tue Jan 17 20:14:51 2017 +0000 +++ b/main.cpp Tue Jan 17 20:22:49 2017 +0000 @@ -14,12 +14,12 @@ #include "compass_sensor.h" #include "temp_sensor.h" #include "acceler_sensor.h" -char orient=3; +char orient=3; //orientation of the LCD and touch screen Serial pc(USBTX, USBRX); I2C i2c_port(p9, p10); // configures pins 9,10 for I2C communication with external sensors float temp2; int avg; -int choice = 0; //choice for the buttons on the touch screen +int choice = 0; //choice for the buttons on the touch screen: 1 = acceleration, 2 = compass, 3 = temperature //const int addr1 = 0x53<<1; DigitalOut led1(LED1); // configures mbed internal LED 1 DigitalOut led2(LED2); // configures mbed internal LED 2 @@ -30,36 +30,36 @@ ILI932x myLCD(BUS_8, dataBus, p15, p17, p16, p14, p20, "myLCD", 240, 320); // Bus 8 bit, bus pin array, CS, RST, DC, WR, RD, name, xpixels, ypixels bool down, lastDown; uint16_t tx, ty; -Timer t; +Timer t; //timer for the touch screen -void UI() +void UI() //the general UI code for the touch screen { myLCD.set_font((unsigned char*) Arial24x23); myLCD.locate(60, 100); - myLCD.printf("A"); - myLCD.circle(60,100,30,Blue); + myLCD.printf("A"); //accleration label + myLCD.circle(60,100,30,Blue); //acceleration button myLCD.locate(160, 100); - myLCD.printf("C"); - myLCD.circle(160,100,30,Green); + myLCD.printf("C"); //compass label + myLCD.circle(160,100,30,Green); //compass button myLCD.locate(260, 100); - myLCD.printf("T"); - myLCD.circle(260,100,30,Red); + myLCD.printf("T"); //temp. label + myLCD.circle(260,100,30,Red); //temp. button } int main() { - myLCD.set_orientation(orient); - myLCD.set_font((unsigned char*) Arial24x23); - touch.setOrientation(orient); - down = false; - lastDown = false; - tx = (uint16_t)0; - ty = (uint16_t)0; + myLCD.set_orientation(orient); //orientation of the screen + myLCD.set_font((unsigned char*) Arial24x23); //font + touch.setOrientation(orient); //orientation of the touch screen + down = false; //down portion of the touch screen + lastDown = false; //last down -- what down was last time + tx = (uint16_t)0; //x-coordinates of the touch screen + ty = (uint16_t)0; //y-coordinates of the touch screen //char sensorData[1]; led1 = 0; led2 = 0; - UI(); - touch.init(); - t.start(); + UI(); //sets the the UI + touch.init(); //initializes touch screen + t.start(); //starts timer //avg = compass_config(); //temperature_config(); //configure_acceleration(); @@ -69,42 +69,42 @@ t.reset(); while (t.read()<10) { - touch.readTouchData(tx, ty, down); + touch.readTouchData(tx, ty, down); //reads in touch screen coordinates if (down) { - if(tx >= 30 && tx <= 90 && ty >= 70 && ty <= 130) + if(tx >= 30 && tx <= 90 && ty >= 70 && ty <= 130) //if the acceleration button is pressed { - if (choice == 2 || choice == 3) + if (choice == 2 || choice == 3) //if other buttons were pushed before { - myLCD.cls(); + myLCD.cls(); //reset UI(); } - myLCD.fillcircle(60,100,30,Blue); + myLCD.fillcircle(60,100,30,Blue); //establish which button is pushed -- "highlight it" myLCD.locate(60, 100); myLCD.printf("A"); choice = 1; } - if(tx >= 130 && tx <= 190 && ty >= 70 && ty <= 130) + if(tx >= 130 && tx <= 190 && ty >= 70 && ty <= 130) //if the compass button is pressed { - if (choice == 1 || choice == 3) + if (choice == 1 || choice == 3) //if other buttons were pushed before { - myLCD.cls(); + myLCD.cls(); //reset UI(); } - myLCD.fillcircle(160,100,30,Green); + myLCD.fillcircle(160,100,30,Green); //establish which button is pushed myLCD.locate(160, 100); myLCD.printf("C"); choice = 2; } - if(tx >= 230 && tx <= 290 && ty >= 70 && ty <= 130) + if(tx >= 230 && tx <= 290 && ty >= 70 && ty <= 130) //if the temperature button is pressed { - if (choice == 1 || choice == 2) + if (choice == 1 || choice == 2) //if any other buttons were pushed before { - myLCD.cls(); + myLCD.cls(); //reset UI(); } - myLCD.fillcircle(260,100,30,Red); + myLCD.fillcircle(260,100,30,Red); //establish which button is pushed myLCD.locate(260, 100); myLCD.printf("T"); choice = 3; @@ -112,23 +112,27 @@ } else if (lastDown) { - if (choice == 1) + if (choice == 1) //acceleration { myLCD.locate(60, 100); myLCD.printf("A"); myLCD.fillcircle(60,100,30,Blue); + //acceleration } - if (choice == 2) + if (choice == 2) //compass { myLCD.locate(160, 100); myLCD.printf("C"); myLCD.fillcircle(160,100,30,Green); + + //compass } - if (choice == 3) + if (choice == 3) //temperature { myLCD.locate(260, 100); myLCD.printf("T"); myLCD.fillcircle(260,100,30,Red); + //temperature } } wait(0.040);