File content as of revision 4:cb3a18844abc:

//MiniProject Day 7
//If tapped, the mbed will either read from a temperature sensor or the compass
#include "stdio.h"
#include "mbed.h"
#include "string"
#include "ILI932x.h"
#include "DmTouch.h"


#include "Arial12x12.h"
#include "Arial24x23.h"
//#include "pavement_48x34.h"
#include "mbed.h"
#include "compass_sensor.h"
#include "temp_sensor.h"
#include "acceler_sensor.h"
char orient=3;
Serial pc(USBTX, USBRX);
I2C i2c_port(p9, p10);                             // configures pins 9,10 for I2C communication with external sensors
float temp2;
int avg;
//const int addr1 = 0x53<<1;
DigitalOut led1(LED1);                             // configures mbed internal LED 1
DigitalOut led2(LED2);                             // configures mbed internal LED 2 
DigitalIn interupt(p20);     // sets accelerometer interupt as digital input at pin 20;
DmTouch touch(DmTouch::DM_TFT24_104, p5, p6, p7, p8, p9);    
PinName dataBus[]= {p30, p29, p28, p27, p26, p25, p24, p23};
ILI932x myLCD(BUS_8, dataBus, p15, p17, p16, p14, p20, "myLCD", 240, 320); // Bus 8 bit, bus pin array, CS, RST, DC, WR, RD, name, xpixels, ypixels
                  
int main() {
         myLCD.set_orientation(orient);
        //char sensorData[1];
        led1 = 0;
        led2 = 0;
        //avg = compass_config();
        //temperature_config();
        //acceleration_n();
        while(1){
            myLCD.set_font((unsigned char*) Arial24x23);
            //myLCD.foreground(Black);
             //myLCD.background(White);
             touch.readTouchData(tx, ty, down);
                myLCD.locate(60, 100);
                myLCD.printf("A");
                myLCD.circle(60,100,30,Blue);
                myLCD.locate(160, 100);
                myLCD.printf("C");
                myLCD.circle(160,100,30,Green);
                myLCD.locate(260, 100);
                myLCD.printf("T");
                myLCD.circle(260,100,30,Red);
            /*wait(1);
            i2c_port.start();                        // forces start condition
            if (interupt == 1){
                i2c_port.start();
                i2c_port.write(addr1);
                i2c_port.write(0x30|0x80);
                i2c_port.stop();
                i2c_port.read(addr1,sensorData,1);
                wait(1);                        //checks for interupt signal from accelerometer
                if (sensorData[0] & 0x40){              //if one tap
                    led1 = 1;         
                    temp2 = temperature();
                    pc.printf("%f", temp2);
                    }
                if (sensorData[0] & 0x20) {             //if two taps
                    led2 = 1;
                    compass_n(avg);
                 }*/
                }
        }