Diff: Sigfox.cpp

Revision:

3:06b0680034a7

diff -r f760e8507750 -r 06b0680034a7 Sigfox.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Sigfox.cpp	Wed Nov 21 17:33:07 2018 +0000
@@ -0,0 +1,105 @@
+
+#include "Sigfox.h"
+
+bool Sigfox::ready() {
+    _at->send("AT");
+    return _at->recv("OK");
+}
+
+bool Sigfox::send(const char *data, char* response) {
+    // If require a response add plus in message
+    if(response != NULL) {
+        // Add request response data
+        _at->send("AT$SF=%s,1", data);
+        // Wait response from sigfox after send
+        if(_at->recv("OK")) {
+            // Wait return
+            return _at->recv("RX=%[^\r]", response);
+        }
+        return false;
+    } else {
+        _at->send("AT$SF=%s", data);
+        return _at->recv("OK");
+    }    
+}
+
+/*
+bool Sigfox::send(const char *data) {
+    // If require a response add plus in message
+        // Add request response data
+        _at->send("AT$SF=%s,1", data);
+        // Wait response from sigfox after send
+
+
+  
+   
+}*/
+
+bool Sigfox::setKey(bool type) {
+    _at->send("ATS410=%d", type);
+    return _at->recv("OK");
+}
+
+bool Sigfox::setPower(uint8_t power) {
+    _at->send("ATS302=%d", power);
+    return _at->recv("OK");
+}
+
+bool Sigfox::setPowerMode(uint8_t power) {
+    _at->send("AT$P=%d", power);
+    return _at->recv("OK");
+}
+
+bool Sigfox::saveConfig() {
+    _at->send("AT$WR");
+    return _at->recv("OK");
+}
+
+void Sigfox::wakeup(DigitalInOut sig_rst, float time) {
+    // Wake up sigfox
+    sig_rst.output();
+    sig_rst = 0;
+    wait(time);
+    // Set high impendance the sigfox reset pin
+    sig_rst.input();
+    wait(time);
+}
+
+char *Sigfox::getID() {
+    char buff[8+2];
+    _at->send("AT$I=10");
+    _at->read(buff, 8+2);
+    memcpy(&ID[0],&buff[0],8);
+    return &ID[0];
+}
+
+char *Sigfox::getPAC() {
+    char buff[16+2];
+    _at->send("AT$I=11");
+    _at->read(buff, 16+2);
+    memcpy(&PAC[0],&buff[0],16);
+    return &PAC[0];
+}
+
+float Sigfox::getTemperature() {
+    char buff[6];
+    _at->send("AT$T?");
+    _at->read(buff, 6);
+    buff[5] = 0;
+    return ((double)atoi(buff))/10;
+}
+
+sigfoxvoltage_t Sigfox::getVoltages() {
+    sigfoxvoltage_t volt;
+    char buff[12];
+    _at->send("AT$V?");
+    _at->read(buff, 12);
+    char buff2[5];
+    memset(buff2,0,5);
+    memcpy(buff2, &buff[0], 4);
+    volt.current = ((double)atoi(buff2))/1000;
+    memset(buff2,0,5);
+    memcpy(buff2, &buff[6], 4);
+    volt.last = ((double)atoi(buff2))/1000;
+    return volt;
+}
\ No newline at end of file