suu pen / ST7735_TFT

Dependents:   ArduinoTFTLCDScreenSample_SPI18TFT

Fork of ST7735_TFT by Jonne Valola

You are viewing an older revision! See the latest version

Homepage

いきさつ

Arduino TFT LCD ScreenというLCD moduleをmbedで使用しました。(module詳細 switch science web)
このLCD moduleのLCD driver ICはST7735 ですが、複数のバージョンがあり、libraryとICのバージョンが合わないと正常に表示しません。

mbedにはこのICに対応したlibrary(ST7735_TFT)がありますが、私が入手したLCD moduleではICの種類が違うためか正常に動作しませんでした。幸い、switch scienceのwebにarduino用の対応libraryがあったので、これを元にmbedのlibrary(ST7735_TFT)に移植しました。

libraryの移植

移植元のArduino library

移植元はswitch science webにある置き換え用TFTライブラリ(Arduino IDE1.0.5用)を使用します。このファイルを解凍してできる、"Adfruit_ST7735.cpp"の230行目以降のGcmd[]配列が該当するdriver ICの設定データになります。

Adfruit_ST7735.cpp

・
・
・
  Gcmd[] = {                  // Initialization commands for 7735B screens
    19,                       // 18 commands in list:
    ST7735_SWRESET,   DELAY,  //  1: Software reset, no args, w/delay
      50,                     //     50 ms delay
    ST7735_SLPOUT ,   DELAY,  //  2: Out of sleep mode, no args, w/delay
      100,                    //     255 = 500 ms delay
    0x26 , 1,  			// 3: Set default gamma
      0x04,                     //     16-bit color
    0xb1, 2,              	// 4: Frame Rate
      0x0b,
      0x14,
    0xc0, 2,                    // 5: VRH1[4:0] & VC[2:0]
      0x08,
      0x00,
    0xc1, 1,                    // 6: BT[2:0]
      0x05,
    0xc5, 2,                    // 7: VMH[6:0] & VML[6:0]
      0x41,
      0x30,
    0xc7, 1,                    // 8: LCD Driving control
      0xc1,
    0xEC, 1,                    // 9: Set pumping color freq
      0x1b,
    0x3a , 1 + DELAY,  	        // 10: Set color format
      0x55,                     //     16-bit color
      100,
    0x2a, 4,                    // 11: Set Column Address
      0x00,
      0x00,
      0x00,
      0x7f,
    0x2b, 4,                    // 12: Set Page Address
      0x00,
      0x00,
      0x00,
      0x9f,
    0x36, 1,                    // 12+1: Set Scanning Direction
      0xc8,
    0xb7, 1,			// 14: Set Source Output Direciton
      0x00,
    0xf2, 1,			// 15: Enable Gamma bit
      0x00,
    0xe0, 15 + DELAY,		// 16: magic
      0x28, 0x24, 0x22, 0x31,
      0x2b, 0x0e, 0x53, 0xa5,
      0x42, 0x16, 0x18, 0x12,
      0x1a, 0x14, 0x03,
      50,
    0xe1, 15 + DELAY,		// 17: more magic
      0x17, 0x1b, 0x1d, 0x0e,
      0x14, 0x11, 0x2c, 0xa5,
      0x3d, 0x09, 0x27, 0x2d,
      0x25, 0x2b, 0x3c, 
      50, 
    ST7735_NORON  ,   DELAY,  // 17: Normal display on, no args, w/delay
      10,                     //     10 ms delay
    ST7735_DISPON ,   DELAY,  // 18: Main screen turn on, no args, w/delay
      255 };                  //     255 = 500 ms delay
・
・
・

移植先のmbed library

移植先となるmbed libraryはST7735_TFTとなります。


All wikipages