This library is for Arduino TFT LCD Screen module.(for new LCD driver IC)
Dependents: ArduinoTFTLCDScreenSample_SPI18TFT
Fork of ST7735_TFT by
いきさつ
Arduino TFT LCD ScreenというLCD moduleをmbedで使用しました。(module詳細 switch science web)
このLCD moduleのLCD driver ICはST7735 ですが、複数のバージョンがあり、libraryとICのバージョンが合わないと正常に表示しません。
mbedにはこのICに対応したlibrary(ST7735_TFT)がありますが、私が入手したLCD moduleではICの種類が違うためか正常に動作しませんでした。幸い、switch scienceのwebにarduino用の対応libraryがあったので、これを元にmbedのlibrary(ST7735_TFT)に移植しました。
libraryの移植
移植元のArduino library
移植元はswitch science webにある置き換え用TFTライブラリ(Arduino IDE1.0.5用)を使用します。このファイルを解凍してできる、"Adfruit_ST7735.cpp"の230行目以降のGcmd[]配列が該当するdriver ICの設定データになります。
Adfruit_ST7735.cpp
・ ・ ・ Gcmd[] = { // Initialization commands for 7735B screens 19, // 18 commands in list: ST7735_SWRESET, DELAY, // 1: Software reset, no args, w/delay 50, // 50 ms delay ST7735_SLPOUT , DELAY, // 2: Out of sleep mode, no args, w/delay 100, // 255 = 500 ms delay 0x26 , 1, // 3: Set default gamma 0x04, // 16-bit color 0xb1, 2, // 4: Frame Rate 0x0b, 0x14, 0xc0, 2, // 5: VRH1[4:0] & VC[2:0] 0x08, 0x00, 0xc1, 1, // 6: BT[2:0] 0x05, 0xc5, 2, // 7: VMH[6:0] & VML[6:0] 0x41, 0x30, 0xc7, 1, // 8: LCD Driving control 0xc1, 0xEC, 1, // 9: Set pumping color freq 0x1b, 0x3a , 1 + DELAY, // 10: Set color format 0x55, // 16-bit color 100, 0x2a, 4, // 11: Set Column Address 0x00, 0x00, 0x00, 0x7f, 0x2b, 4, // 12: Set Page Address 0x00, 0x00, 0x00, 0x9f, 0x36, 1, // 12+1: Set Scanning Direction 0xc8, 0xb7, 1, // 14: Set Source Output Direciton 0x00, 0xf2, 1, // 15: Enable Gamma bit 0x00, 0xe0, 15 + DELAY, // 16: magic 0x28, 0x24, 0x22, 0x31, 0x2b, 0x0e, 0x53, 0xa5, 0x42, 0x16, 0x18, 0x12, 0x1a, 0x14, 0x03, 50, 0xe1, 15 + DELAY, // 17: more magic 0x17, 0x1b, 0x1d, 0x0e, 0x14, 0x11, 0x2c, 0xa5, 0x3d, 0x09, 0x27, 0x2d, 0x25, 0x2b, 0x3c, 50, ST7735_NORON , DELAY, // 17: Normal display on, no args, w/delay 10, // 10 ms delay ST7735_DISPON , DELAY, // 18: Main screen turn on, no args, w/delay 255 }; // 255 = 500 ms delay ・ ・ ・
移植先のmbed library
移植先となるmbed libraryはST7735_TFT libraryとなります。この中のST7735_TFT.cppのtft_reset() にIC設定データを追加します。追加したコードを区別するため"ST7735B"というdefine定義で条件コンパイルするようにしました。
追加したコードの最後にある"switch(orientation)"の節はarduinoのlibraryにはなく、mbedのlibraryから修正したものです。
ST7735_TFT.cpp
・ ・ ・ void ST7735_TFT::tft_reset() { static unsigned short driverCode; // init SPI _spi.format(8,3); // 8 bit spi mode 3 _spi.frequency(16000000); // 16Mhz SPI clock ... 15Mhz is maximum for display, but it seems to work // reset exactly like in Arduino version _cs = 0; _reset = 1; // reset wait_ms(500); _reset = 0; // reset wait_ms(500); _reset = 1; // reset wait_ms(500); #ifdef ST7735B //@ss /* Start Initial Sequence ----------------------------------------------------*/ wr_cmd(ST7735_SWRESET); /* SW Reset */ wait_ms(150); wr_cmd(ST7735_SLPOUT); /* Out of sleepmode */ wait_ms(500); wr_cmd(0x26); // 3: Set default gamma wr_dat(0x04); // 16-bit color wr_cmd(ST7735_FRMCTR1); /*4 Frame rate in normal mode */ wr_dat(0x0b); wr_dat(0x14); wr_cmd(0xc0); // 5 POWER CONTROL 1 wr_dat(0x08); wr_dat(0x00); wr_cmd(0xc1); // 6 POWER CONTROL 2 wr_dat(0x05); wr_cmd(0xC5); // POWER CONTROL 6 wr_dat(0x41); // wr_dat(0x30); wr_cmd(0xc7); // 8:LCD Driving control wr_dat(0xc1); wr_cmd(0xec); // 9:Set color format wr_dat(0x1b); // 16-bit color wr_cmd(0x3A); // COLOR MODE wr_dat(0x55); // wait_ms(100); wr_cmd(0x2a); // 11 COLUMN ADDR SET wr_dat(0x00); // wr_dat(0x00); // xstart = 0 wr_dat(0x00); // wr_dat(0x7F); // xend = 127 wr_cmd(0x2b); // ROW ADDR SET wr_dat(0x00); // wr_dat(0x00); // ystart = 0 wr_dat(0x00); // wr_dat(0x9F); // yend = 159 wr_cmd(0x36); // 13 Set Scanning Direction wr_dat(0xc8); wr_cmd(0xb7); // 14 Set Source Output Direction wr_dat(0x00); /* Gamma settings -----------------------------------------------------------*/ wr_cmd(0xE0); // GMCTRP1 wr_dat(0x28); wr_dat(0x24); wr_dat(0x22); wr_dat(0x31); wr_dat(0x2b); wr_dat(0x0e); wr_dat(0x53); wr_dat(0xa5); wr_dat(0x42); wr_dat(0x16); wr_dat(0x18); wr_dat(0x12); wr_dat(0x1a); wr_dat(0x14); wr_dat(0x03); wait_ms(50); wr_cmd(0xE1); // GMCTRN1 wr_dat(0x17); wr_dat(0x1b); wr_dat(0x1d); wr_dat(0x0e); wr_dat(0x14); wr_dat(0x11); wr_dat(0x2c); wr_dat(0xa5); wr_dat(0x3d); wr_dat(0x09); wr_dat(0x27); wr_dat(0x2d); wr_dat(0x25); wr_dat(0x2b); wr_dat(0x3c); wait_ms(50); wr_cmd(0x13); // 18 Normal display on no args. wait_ms(10); wr_cmd(0x29); // 19 Main screen turn on, no args.normal display on wait_ms(500); switch (orientation) { case 0: wr_reg(0x36, 0x0008); //originalでの0xc8は間違いで、ST7735_MADCTL(0x36)ではないか break; case 1: wr_reg(0x36, 0x0068); break; case 2: wr_reg(0x36, 0x00C8); break; case 3: wr_reg(0x36, 0x00A8); break; } #else //@ss ~ST7735B (original) /* Start Initial Sequence ----------------------------------------------------*/ wr_cmd(ST7735_SWRESET); /* SW Reset */ wait_ms(150); wr_cmd(ST7735_SLPOUT); /* Out of sleepmode */ wait_ms(500); ・ ・ ・
mbed library自体の修正
上記のdriver IC設定値の修正だけでは、LCDの表示領域がずれるなどの不具合がありました。この修正も行います。この不具合の原因が、driver ICの種類の違いよるものなのか、コードそのものの不具合なのかはわかりません。
修正コードは"@ss"のコメントをつけた行になります。
1.driver ICへの画像データバッファアドレス指示の修正
pixel()関数で使用しているwindow()関数の引数が間違っています。元のコードは、終点のx,yが絶対座標形式のようになっていますが、視点からの相対座標を設定しないといけません。
ST7735_TFT.cpp
・ ・ ・ void ST7735_TFT::pixel(int x, int y, int color) { if ((x >= width()) || (y >= height())) return; window(x,y,1,1); //@ss //@ss window(x,y,x+1,y+1); // setup for data ・ ・ ・
2.window()関数の座標原点のずれ
driver ICの仕様かもしれませんが、driver ICの画像データバッファの原点が、x=2, y=1となっています。このlibraryで使用される原点はx=0, y=0なので、offsetを追加します。
ST7735_TFT.cpp
・ ・ ・ void ST7735_TFT::window (unsigned int x, unsigned int y, unsigned int w, unsigned int h) { //@ss なぜか CASET(X軸)で2, RASET(Y軸)で1 が最小値になっており、これがLCDDisplayのx,y原点になっていない(LCDの原点を設定するためには(-2,-1)を指示する必要がある //@ss プログラム上はLCD原点を0,0にするために、この関数でoffsetをかける。 x-=2; //@ss y-=1; //@ss wr_cmd(ST7735_CASET); // column addr set wr_dat(0x00); ・ ・ ・
3.端子定義処理での"orientation"変数の初期値設定タイミングの変更
"ST7735_TFT()"関数内の"orientation"変数の初期値設定がtft_reset()の後になっていますが、tft_reset()内でこの変数を使用しているので、tft_reset()実行前に、変数値を設定する必要があります。
ST7735_TFT.cpp
・ ・ ・ ST7735_TFT::ST7735_TFT(PinName mosi, PinName miso, PinName sclk, PinName cs, PinName rs, PinName reset, const char *name) : _spi(mosi, miso, sclk), _cs(cs), _rs(rs), _reset(reset),GraphicsDisplay(name) { orientation = 1; //@ss tft_reset(); //@ss orientation = 2; char_x = 0; ・ ・ ・
補足:LCD 表示原点の設定
今回使用したmoduleのLCDは160*128ピクセルのものです。画像データの送信によって、x,y軸を入れ替える(横長、縦長)ことができます。これを設定するのが、上記"3"のorientation変数になります。この変数は"set_orientation()"関数の引数として与えることで変更することができます。引数は0,1,2,3となります。
<縦横選択>
0,2 : 縦長(x=0-127, y=0-159)
1,3 : 横長(x=0-159, y=0-127)
<縦(y軸)座標値増加方向>
0,1を基準にした場合、2,3は上下が逆転する
<表示例>
orientation = 0
orientation = 1
orientation =2
orientation=3
以上
Diff: GraphicsDisplay.cpp
- Revision:
- 0:246f2fb5be59
diff -r 000000000000 -r 246f2fb5be59 GraphicsDisplay.cpp --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/GraphicsDisplay.cpp Sun Dec 11 21:05:52 2011 +0000 @@ -0,0 +1,176 @@ +/* mbed GraphicsDisplay Display Library Base Class + * Copyright (c) 2007-2009 sford + * Released under the MIT License: http://mbed.org/license/mit + */ + +#include "GraphicsDisplay.h" + +const unsigned char FONT8x8[97][8] = { +0x08,0x08,0x08,0x00,0x00,0x00,0x00,0x00, // columns, rows, num_bytes_per_char +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // space 0x20 +0x30,0x78,0x78,0x30,0x30,0x00,0x30,0x00, // ! +0x6C,0x6C,0x6C,0x00,0x00,0x00,0x00,0x00, // " +0x6C,0x6C,0xFE,0x6C,0xFE,0x6C,0x6C,0x00, // # +0x18,0x3E,0x60,0x3C,0x06,0x7C,0x18,0x00, // $ +0x00,0x63,0x66,0x0C,0x18,0x33,0x63,0x00, // % +0x1C,0x36,0x1C,0x3B,0x6E,0x66,0x3B,0x00, // & +0x30,0x30,0x60,0x00,0x00,0x00,0x00,0x00, // ' +0x0C,0x18,0x30,0x30,0x30,0x18,0x0C,0x00, // ( +0x30,0x18,0x0C,0x0C,0x0C,0x18,0x30,0x00, // ) +0x00,0x66,0x3C,0xFF,0x3C,0x66,0x00,0x00, // * +0x00,0x30,0x30,0xFC,0x30,0x30,0x00,0x00, // + +0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x30, // , +0x00,0x00,0x00,0x7E,0x00,0x00,0x00,0x00, // - +0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x00, // . +0x03,0x06,0x0C,0x18,0x30,0x60,0x40,0x00, // / (forward slash) +0x3E,0x63,0x63,0x6B,0x63,0x63,0x3E,0x00, // 0 0x30 +0x18,0x38,0x58,0x18,0x18,0x18,0x7E,0x00, // 1 +0x3C,0x66,0x06,0x1C,0x30,0x66,0x7E,0x00, // 2 +0x3C,0x66,0x06,0x1C,0x06,0x66,0x3C,0x00, // 3 +0x0E,0x1E,0x36,0x66,0x7F,0x06,0x0F,0x00, // 4 +0x7E,0x60,0x7C,0x06,0x06,0x66,0x3C,0x00, // 5 +0x1C,0x30,0x60,0x7C,0x66,0x66,0x3C,0x00, // 6 +0x7E,0x66,0x06,0x0C,0x18,0x18,0x18,0x00, // 7 +0x3C,0x66,0x66,0x3C,0x66,0x66,0x3C,0x00, // 8 +0x3C,0x66,0x66,0x3E,0x06,0x0C,0x38,0x00, // 9 +0x00,0x18,0x18,0x00,0x00,0x18,0x18,0x00, // : +0x00,0x18,0x18,0x00,0x00,0x18,0x18,0x30, // ; +0x0C,0x18,0x30,0x60,0x30,0x18,0x0C,0x00, // < +0x00,0x00,0x7E,0x00,0x00,0x7E,0x00,0x00, // = +0x30,0x18,0x0C,0x06,0x0C,0x18,0x30,0x00, // > +0x3C,0x66,0x06,0x0C,0x18,0x00,0x18,0x00, // ? +0x3E,0x63,0x6F,0x69,0x6F,0x60,0x3E,0x00, // @ 0x40 +0x18,0x3C,0x66,0x66,0x7E,0x66,0x66,0x00, // A +0x7E,0x33,0x33,0x3E,0x33,0x33,0x7E,0x00, // B +0x1E,0x33,0x60,0x60,0x60,0x33,0x1E,0x00, // C +0x7C,0x36,0x33,0x33,0x33,0x36,0x7C,0x00, // D +0x7F,0x31,0x34,0x3C,0x34,0x31,0x7F,0x00, // E +0x7F,0x31,0x34,0x3C,0x34,0x30,0x78,0x00, // F +0x1E,0x33,0x60,0x60,0x67,0x33,0x1F,0x00, // G +0x66,0x66,0x66,0x7E,0x66,0x66,0x66,0x00, // H +0x3C,0x18,0x18,0x18,0x18,0x18,0x3C,0x00, // I +0x0F,0x06,0x06,0x06,0x66,0x66,0x3C,0x00, // J +0x73,0x33,0x36,0x3C,0x36,0x33,0x73,0x00, // K +0x78,0x30,0x30,0x30,0x31,0x33,0x7F,0x00, // L +0x63,0x77,0x7F,0x7F,0x6B,0x63,0x63,0x00, // M +0x63,0x73,0x7B,0x6F,0x67,0x63,0x63,0x00, // N +0x3E,0x63,0x63,0x63,0x63,0x63,0x3E,0x00, // O +0x7E,0x33,0x33,0x3E,0x30,0x30,0x78,0x00, // P 0x50 +0x3C,0x66,0x66,0x66,0x6E,0x3C,0x0E,0x00, // Q +0x7E,0x33,0x33,0x3E,0x36,0x33,0x73,0x00, // R +0x3C,0x66,0x30,0x18,0x0C,0x66,0x3C,0x00, // S +0x7E,0x5A,0x18,0x18,0x18,0x18,0x3C,0x00, // T +0x66,0x66,0x66,0x66,0x66,0x66,0x7E,0x00, // U +0x66,0x66,0x66,0x66,0x66,0x3C,0x18,0x00, // V +0x63,0x63,0x63,0x6B,0x7F,0x77,0x63,0x00, // W +0x63,0x63,0x36,0x1C,0x1C,0x36,0x63,0x00, // X +0x66,0x66,0x66,0x3C,0x18,0x18,0x3C,0x00, // Y +0x7F,0x63,0x46,0x0C,0x19,0x33,0x7F,0x00, // Z +0x3C,0x30,0x30,0x30,0x30,0x30,0x3C,0x00, // [ +0x60,0x30,0x18,0x0C,0x06,0x03,0x01,0x00, // \ (back slash) +0x3C,0x0C,0x0C,0x0C,0x0C,0x0C,0x3C,0x00, // ] +0x08,0x1C,0x36,0x63,0x00,0x00,0x00,0x00, // ^ +0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF, // _ +0x18,0x18,0x0C,0x00,0x00,0x00,0x00,0x00, // ` 0x60 +0x00,0x00,0x3C,0x06,0x3E,0x66,0x3B,0x00, // a +0x70,0x30,0x3E,0x33,0x33,0x33,0x6E,0x00, // b +0x00,0x00,0x3C,0x66,0x60,0x66,0x3C,0x00, // c +0x0E,0x06,0x3E,0x66,0x66,0x66,0x3B,0x00, // d +0x00,0x00,0x3C,0x66,0x7E,0x60,0x3C,0x00, // e +0x1C,0x36,0x30,0x78,0x30,0x30,0x78,0x00, // f +0x00,0x00,0x3B,0x66,0x66,0x3E,0x06,0x7C, // g +0x70,0x30,0x36,0x3B,0x33,0x33,0x73,0x00, // h +0x18,0x00,0x38,0x18,0x18,0x18,0x3C,0x00, // i +0x06,0x00,0x06,0x06,0x06,0x66,0x66,0x3C, // j +0x70,0x30,0x33,0x36,0x3C,0x36,0x73,0x00, // k +0x38,0x18,0x18,0x18,0x18,0x18,0x3C,0x00, // l +0x00,0x00,0x66,0x7F,0x7F,0x6B,0x63,0x00, // m +0x00,0x00,0x7C,0x66,0x66,0x66,0x66,0x00, // n +0x00,0x00,0x3C,0x66,0x66,0x66,0x3C,0x00, // o +0x00,0x00,0x6E,0x33,0x33,0x3E,0x30,0x78, // p +0x00,0x00,0x3B,0x66,0x66,0x3E,0x06,0x0F, // q +0x00,0x00,0x6E,0x3B,0x33,0x30,0x78,0x00, // r +0x00,0x00,0x3E,0x60,0x3C,0x06,0x7C,0x00, // s +0x08,0x18,0x3E,0x18,0x18,0x1A,0x0C,0x00, // t +0x00,0x00,0x66,0x66,0x66,0x66,0x3B,0x00, // u +0x00,0x00,0x66,0x66,0x66,0x3C,0x18,0x00, // v +0x00,0x00,0x63,0x6B,0x7F,0x7F,0x36,0x00, // w +0x00,0x00,0x63,0x36,0x1C,0x36,0x63,0x00, // x +0x00,0x00,0x66,0x66,0x66,0x3E,0x06,0x7C, // y +0x00,0x00,0x7E,0x4C,0x18,0x32,0x7E,0x00, // z +0x0E,0x18,0x18,0x70,0x18,0x18,0x0E,0x00, // { +0x0C,0x0C,0x0C,0x00,0x0C,0x0C,0x0C,0x00, // | +0x70,0x18,0x18,0x0E,0x18,0x18,0x70,0x00, // } +0x3B,0x6E,0x00,0x00,0x00,0x00,0x00,0x00, // ~ +0x1C,0x36,0x36,0x1C,0x00,0x00,0x00,0x00}; // DEL + +GraphicsDisplay::GraphicsDisplay(const char *name):TextDisplay(name) { + foreground(0xFFFF); + background(0x0000); +} + +void GraphicsDisplay::character(int column, int row, int value) { + blitbit(column * 8, row * 8, 8, 8, (char*)&(FONT8x8[value - 0x1F][0])); +} + +void GraphicsDisplay::window(int x, int y, int w, int h) { + // current pixel location + _x = x; + _y = y; + // window settings + _x1 = x; + _x2 = x + w - 1; + _y1 = y; + _y2 = y + h - 1; +} + +void GraphicsDisplay::putp(int colour) { + // put pixel at current pixel location + pixel(_x, _y, colour); + // update pixel location based on window settings + _x++; + if(_x > _x2) { + _x = _x1; + _y++; + if(_y > _y2) { + _y = _y1; + } + } +} + +void GraphicsDisplay::fill(int x, int y, int w, int h, int colour) { + window(x, y, w, h); + for(int i=0; i<w*h; i++) { + putp(colour); + } +} + +void GraphicsDisplay::cls() { + fill(0, 0, width(), height(), _background); +} + +void GraphicsDisplay::blit(int x, int y, int w, int h, const int *colour) { + window(x, y, w, h); + for(int i=0; i<w*h; i++) { + putp(colour[i]); + } +} + +void GraphicsDisplay::blitbit(int x, int y, int w, int h, const char* colour) { + window(x, y, w, h); + for(int i = 0; i < w*h; i++) { + char byte = colour[i >> 3]; + int offset = i & 0x7; + int c = ((byte << offset) & 0x80) ? _foreground : _background; + putp(c); + } +} + +int GraphicsDisplay::columns() { + return width() / 8; +} + +int GraphicsDisplay::rows() { + return height() / 8; +} +