Revision 11:6916c05fde52, committed 2018-09-07

Comitter:

suntopbd

Date:

Fri Sep 07 20:17:07 2018 +0000

Parent:

10:053397a8dc40

Commit message:

Microbit BLE UART IoT

Changed in this revision

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/ConfigParamsPersistence.h	Fri Sep 07 20:17:07 2018 +0000
@@ -0,0 +1,53 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __BLE_CONFIG_PARAMS_PERSISTENCE_H__
+#define __BLE_CONFIG_PARAMS_PERSISTENCE_H__
+
+#include "ble/services/URIBeaconConfigService.h"
+
+/**
+ * Generic API to load the URIBeacon configuration parameters from persistent
+ * storage. If persistent storage isn't available, the persistenceSignature
+ * member of params may be left un-initialized to the MAGIC, and this will cause
+ * a reset to default values.
+ *
+ * @param[out] paramsP
+ *                 The parameters to be filled in from persistence storage. This
+                   argument can be NULL if the caller is only interested in
+                   discovering the persistence status of params.
+
+ * @return true if params were loaded from persistent storage and have usefully
+ *         initialized fields.
+ */
+bool loadURIBeaconConfigParams(URIBeaconConfigService::Params_t *paramsP);
+
+/**
+ * Generic API to store the URIBeacon configuration parameters to persistent
+ * storage. It typically initializes the persistenceSignature member of the
+ * params to the MAGIC value to indicate persistence.
+ *
+ * @note: the save operation may be asynchronous. It may be a short while before
+ * the request takes affect. Reading back saved configParams may not yield
+ * correct behaviour if attempted soon after a store.
+ *
+ * @param[in/out] paramsP
+ *                    The params to be saved; persistenceSignature member gets
+ *                    updated if persistence is successful.
+ */
+void saveURIBeaconConfigParams(const URIBeaconConfigService::Params_t *paramsP);
+
+#endif /* #ifndef __BLE_CONFIG_PARAMS_PERSISTENCE_H__*/

--- a/main.cpp	Thu Sep 06 22:56:26 2018 +0000
+++ b/main.cpp	Fri Sep 07 20:17:07 2018 +0000
@@ -27,12 +27,18 @@
 #include "stdio.h"
 #include "UARTService.h"
 
+#include "ble/BLE.h"
+#include "ble/services/URIBeaconConfigService.h"
+#include "ble/services/DFUService.h"
+#include "ble/services/DeviceInformationService.h"
+#include "ConfigParamsPersistence.h"
+
 
 #define NEED_CONSOLE_OUTPUT 1 // if BLE printf messages needed on the remote console (PC/phone/host);                            
 #if NEED_CONSOLE_OUTPUT
-#define BLEprintf(STR) { if (uart) uart->write(STR, strlen(STR)); }
+#define blePrintf(STR) { if (uart) uart->write(STR, strlen(STR)); }
 #else
-#define BLEprintf(...) 
+#define blePrintf(...) 
 #endif
 
 ///////////////// pin table /////////////////////////
@@ -62,17 +68,13 @@
 
 
 BLEDevice  ble;
+DigitalOut led1(LED1);
 UARTService *uart;
 AnalogIn   ain(P0_3);
-DigitalOut   dout(P0_16);
-DigitalIn   din(P0_17);
+int val,dVal, dec, i;
+char result[100];
+float batt = 0.03;
  
-int dVal, dec, i,j;  
-float val,exBatt,f;
-char buffer[10];
-/////////////////// functions ///////////////////////
-
-
 
 void disconnectionCallback(const Gap::DisconnectionCallbackParams_t *params)
 {
@@ -81,67 +83,56 @@
 
 void periodicCallback(void)
 {
-    BLEprintf("\n");
-    BLEprintf("Battery Volt: ");
-    BLEprintf(buffer);
-   // BLEprintf("\r\n");
     
+    blePrintf("BATT VOlT: ");
+    blePrintf(result);
+    blePrintf("\r\n");
 }
-///////////////////////////////////////////////
-///////////////// MAIN FUNC ///////////////////
-///////////////////////////////////////////////
- 
+
 int main(void)
 {
     Ticker ticker;
-    ticker.attach(periodicCallback, 2);
+    ticker.attach(periodicCallback, 5);
+
+    blePrintf("Initialising the nRF51822\n\r");
     ble.init();
-    ble.onDisconnection(disconnectionCallback);    
+    ble.onDisconnection(disconnectionCallback);
+    
     uart = new UARTService(ble);
 
+    /* setup advertising */
     ble.accumulateAdvertisingPayload(GapAdvertisingData::BREDR_NOT_SUPPORTED);
     ble.setAdvertisingType(GapAdvertisingParams::ADV_CONNECTABLE_UNDIRECTED);
     ble.accumulateAdvertisingPayload(GapAdvertisingData::SHORTENED_LOCAL_NAME,
                                      (const uint8_t *)"uBit BLE", sizeof("uBit BLE") - 1);
+                                     // device name on BLE //
     ble.accumulateAdvertisingPayload(GapAdvertisingData::COMPLETE_LIST_128BIT_SERVICE_IDS,
                                      (const uint8_t *)UARTServiceUUID_reversed, sizeof(UARTServiceUUID_reversed));
 
-    ble.setAdvertisingInterval(160); // 100ms; in multiples of 0.625ms. //
+    ble.setAdvertisingInterval(160); /* 100ms; in multiples of 0.625ms. */
     ble.startAdvertising();
 
-    while (true) 
-    {
+    while (true) {
         ble.waitForEvent();
-        dout = din.read();
         val = ain.read_u16();
-
- 
-// 100k+22k voltage divider
-// 3.3 Vcc board voltage
- 
-    exBatt = (122/22)*3.6*val/1023.0; // ext batt volt 
-    //exBatt =12.37;
+    // 22k+100K VOLTAGE DIVIDER AND 0.15 IS OFFSET   
+    batt = (122/22)*3.6*val/1023.0 - 0.15
+    dVal = batt;
+    dec = (int)(batt * 100) % 100;
 
-    dVal = exBatt;  
-    
-    
-    dec = (int)(exBatt * 100) % 100;
-    if(exBatt>1 && exBatt<10){i=0;}
-    if(exBatt>=10 && exBatt<100){i=1;}
-    j=i;
-    memset(buffer, 0, 10);
-    
-     while (dVal > 0)
-        {
-        buffer[i] = (dVal % 10) + '0';
-        dVal /= 10;
-        i--;
-         }
-    buffer[j+1] = '.';
-    buffer[j+2] = (dec / 10) + '0';
-    buffer[j+3] = (dec % 10) + '0';
+    memset(result, 0, 100);
+    result[0] = (dVal / 10) + '0';
+    result[1] = (dVal % 10) + '0';
+    result[2] = '.';
+    result[3] = (dec / 10) + '0';
+    result[4] = (dec % 10) + '0';
+
 
-     }
-///////////// end of while(1) //////////////            
+    for (i=strlen(result)-1; i>=0; i--)
+        putc(result[i], stdout);
+      
+            }
 }
-///////////// end of main  /////////////////
+
+
+

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/nrfConfigParamsPersistence.cpp	Fri Sep 07 20:17:07 2018 +0000
@@ -0,0 +1,105 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+extern "C" {
+#include "pstorage.h"
+}
+#include "nrf_error.h"
+#include "ConfigParamsPersistence.h"
+
+/**
+ * Nordic specific structure used to store params persistently.
+ * It extends URIBeaconConfigService::Params_t with a persistence signature.
+ */
+struct PersistentParams_t {
+    URIBeaconConfigService::Params_t params;
+    uint32_t                         persistenceSignature; /* This isn't really a parameter, but having the expected
+                                                            * magic value in this field indicates persistence. */
+
+    static const uint32_t MAGIC = 0x1BEAC000;              /* Magic that identifies persistence */
+};
+
+/**
+ * The following is a module-local variable to hold configuration parameters for
+ * short periods during flash access. This is necessary because the pstorage
+ * APIs don't copy in the memory provided as data source. The memory cannot be
+ * freed or reused by the application until this flash access is complete. The
+ * load and store operations in this module initialize persistentParams and then
+ * pass it on to the 'pstorage' APIs.
+ */
+static PersistentParams_t persistentParams;
+
+static pstorage_handle_t pstorageHandle;
+
+/**
+ * Dummy callback handler needed by Nordic's pstorage module. This is called
+ * after every flash access.
+ */
+static void pstorageNotificationCallback(pstorage_handle_t *p_handle,
+                                         uint8_t            op_code,
+                                         uint32_t           result,
+                                         uint8_t           *p_data,
+                                         uint32_t           data_len)
+{
+    /* APP_ERROR_CHECK(result); */
+}
+
+/* Platform-specific implementation for persistence on the nRF5x. Based on the
+ * pstorage module provided by the Nordic SDK. */
+bool loadURIBeaconConfigParams(URIBeaconConfigService::Params_t *paramsP)
+{
+    static bool pstorageInitied = false;
+    if (!pstorageInitied) {
+        pstorage_init();
+
+        static pstorage_module_param_t pstorageParams = {
+            .cb          = pstorageNotificationCallback,
+            .block_size  = sizeof(PersistentParams_t),
+            .block_count = 1
+        };
+        pstorage_register(&pstorageParams, &pstorageHandle);
+        pstorageInitied = true;
+    }
+
+    if ((pstorage_load(reinterpret_cast<uint8_t *>(&persistentParams), &pstorageHandle, sizeof(PersistentParams_t), 0) != NRF_SUCCESS) ||
+        (persistentParams.persistenceSignature != PersistentParams_t::MAGIC)) {
+        // On failure zero out and let the service reset to defaults
+        memset(paramsP, 0, sizeof(URIBeaconConfigService::Params_t));
+        return false;
+    }
+
+    memcpy(paramsP, &persistentParams.params, sizeof(URIBeaconConfigService::Params_t));
+    return true;
+}
+
+/* Platform-specific implementation for persistence on the nRF5x. Based on the
+ * pstorage module provided by the Nordic SDK. */
+void saveURIBeaconConfigParams(const URIBeaconConfigService::Params_t *paramsP)
+{
+    memcpy(&persistentParams.params, paramsP, sizeof(URIBeaconConfigService::Params_t));
+    if (persistentParams.persistenceSignature != PersistentParams_t::MAGIC) {
+        persistentParams.persistenceSignature = PersistentParams_t::MAGIC;
+        pstorage_store(&pstorageHandle,
+                       reinterpret_cast<uint8_t *>(&persistentParams),
+                       sizeof(PersistentParams_t),
+                       0 /* offset */);
+    } else {
+        pstorage_update(&pstorageHandle,
+                        reinterpret_cast<uint8_t *>(&persistentParams),
+                        sizeof(PersistentParams_t),
+                        0 /* offset */);
+    }
+}