Diff: sx1276/sx1276-hal.cpp

Revision:

21:2e496deb7858

Parent:

20:e05596ba4166

Child:

22:7f3aab69cca9

--- a/sx1276/sx1276-hal.cpp	Tue Oct 20 12:58:58 2015 +0000
+++ b/sx1276/sx1276-hal.cpp	Thu Nov 26 10:39:03 2015 +0000
@@ -33,12 +33,11 @@
     { MODEM_LORA, REG_LR_PAYLOADMAXLENGTH, 0x40 },  
 };
 
-SX1276MB1xAS::SX1276MB1xAS( void ( *txDone )( ), void ( *txTimeout ) ( ), void ( *rxDone ) ( uint8_t *payload, uint16_t size, int16_t rssi, int8_t snr ), 
-                            void ( *rxTimeout ) ( ), void ( *rxError ) ( ), void ( *fhssChangeChannel ) ( uint8_t channelIndex ), void ( *cadDone ) ( bool ChannelActivityDetected ),
+SX1276MB1xAS::SX1276MB1xAS( RadioEvents_t *events,
                             PinName mosi, PinName miso, PinName sclk, PinName nss, PinName reset,
                             PinName dio0, PinName dio1, PinName dio2, PinName dio3, PinName dio4, PinName dio5,
                             PinName antSwitch )
-                            : SX1276( txDone, txTimeout, rxDone, rxTimeout, rxError, fhssChangeChannel, cadDone, mosi, miso, sclk, nss, reset, dio0, dio1, dio2, dio3, dio4, dio5),
+                            : SX1276( events, mosi, miso, sclk, nss, reset, dio0, dio1, dio2, dio3, dio4, dio5 ),
                             antSwitch( antSwitch ),
                         #if( defined ( TARGET_NUCLEO_L152RE ) )
                             fake( D8 ) 
@@ -46,6 +45,8 @@
                             fake( A3 )
                         #endif
 {
+    this->RadioEvents = events;
+
     Reset( );
     
     RxChainCalibration( );
@@ -60,25 +61,26 @@
 
     SetModem( MODEM_FSK );
 
-    this->settings.State = IDLE ;
+    this->settings.State = RF_IDLE ;
 }
 
-SX1276MB1xAS::SX1276MB1xAS( void ( *txDone )( ), void ( *txTimeout ) ( ), void ( *rxDone ) ( uint8_t *payload, uint16_t size, int16_t rssi, int8_t snr ), 
-                            void ( *rxTimeout ) ( ), void ( *rxError ) ( ), void ( *fhssChangeChannel ) ( uint8_t channelIndex ), void ( *cadDone ) ( bool ChannelActivityDetected ) ) 
+SX1276MB1xAS::SX1276MB1xAS( RadioEvents_t *events ) 
                         #if defined ( TARGET_NUCLEO_L152RE )
-                        :   SX1276( txDone, txTimeout, rxDone, rxTimeout, rxError, fhssChangeChannel, cadDone, D11, D12, D13, D10, A0, D2, D3, D4, D5, A3, D9 ), // For NUCLEO L152RE dio4 is on port A3
+                        :   SX1276( events, D11, D12, D13, D10, A0, D2, D3, D4, D5, A3, D9 ), // For NUCLEO L152RE dio4 is on port A3
                             antSwitch( A4 ),
                             fake( D8 )
                         #elif defined( TARGET_LPC11U6X )
-                        :   SX1276( txDone, txTimeout, rxDone, rxTimeout, rxError, fhssChangeChannel, cadDone, D11, D12, D13, D10, A0, D2, D3, D4, D5, D8, D9 ),
+                        :   SX1276( events, D11, D12, D13, D10, A0, D2, D3, D4, D5, D8, D9 ),
                             antSwitch( P0_23 ), 
                             fake( A3 )
                         #else
-                        :   SX1276( txDone, txTimeout, rxDone, rxTimeout, rxError, fhssChangeChannel, cadDone, D11, D12, D13, D10, A0, D2, D3, D4, D5, D8, D9 ),
+                        :   SX1276( events, D11, D12, D13, D10, A0, D2, D3, D4, D5, D8, D9 ),
                             antSwitch( A4 ), 
                             fake( A3 )
                         #endif
 {
+    this->RadioEvents = events;
+
     Reset( );
     
     boardConnected = UNKNOWN;
@@ -96,7 +98,7 @@
 
     SetModem( MODEM_FSK );
 
-    this->settings.State = IDLE ;
+    this->settings.State = RF_IDLE ;
 }
 
 //-------------------------------------------------------------------------