Steven Osborn / Mbed 2 deprecated LoDev_RXTX

Basic RX/TX example, this is the firmware that LoDev S76S comes with initially.

Dependencies:   mbed SX1276RonothLib

Homepage

Table of Contents

  1. LoDev RX/TX Example
  2. Transmit

LoDev RX/TX Example

Transmit

By default LoDev comes on in receive mode. To switch to transmit mode, connect PC2 to 3.3v and press the reset switch. In TX mode the blue LED is normally off and blinks on briefly when transmitting.

Receive

When in RX mode the LED is normally on and turns off briefly when receiving a packet. This is the default mode.

All wikipages