steven niu / LPC1768_DMA

implement LPC1768 GPDMA API

Dependents:   LPC1768_DMA_implementation

Currently, only LPC1768 HAL level API have been implemented. You can also find the test code to test the m2p and m2m here http://mbed.org/users/steniu01/code/LPC1768_DMA_implementation/. The target is to implement the user side platform agnostic API to make it more easily to use DMA.

There are still quite a few things undone (list in priority order):

1. Implement user side API to provide platform agnostic user friendly API

2. Tidy up the codes and add more comments

3. Create more test cases

4. Fully test the codes using mbed sdk automated test suits

5. Implement LLI

LPC1768_dma.h

Committer:
steniu01
Date:
2014-08-14
Revision:
0:226ca65983a2
Child:
1:86b13bfcbe46

File content as of revision 0:226ca65983a2:

#ifdef TARGET_LPC1768
/** 
  * @brief  DMA Init structure definition
  */
/*DMA channel control register*/
#define DMA_CCxControl_TransferSize_Pos 0
#define DMA_CCxControl_SBSize_Pos 12
#define DMA_CCxControl_DBSize_Pos 15
#define DMA_CCxControl_SWidth_Pos 18
#define DMA_CCxControl_DWidth_Pos 21
#define DMA_CCxControl_SI_Pos 26
#define DMA_CCxControl_DI_Pos 27
#define DMA_CCxControl_I_Pos 31

/*DMA Channel config register*/
#define DMA_CCxConfig_E_Pos 0
#define DMA_CCxConfig_SrcPeripheral_Pos 1
#define DMA_CCxConfig_DestPeripheral_Pos 6
#define DMA_CCxConfig_TransferType_Pos 11
#define DMA_CCxConfig_IE_Pos 14
#define DMA_CCxConfig_ITC_Pos 15
#define DMA_CCxConfig_L_Pos 16
#define DMA_CCxConfig_A_Pos 17
#define DMA_CCxConfig_H_Pos 18




typedef struct
{
    uint32_t DMA_DestAddr; /*!< Specifies the destination base address for DMAy Channelx. */
    uint32_t DMA_SrcAddr;     /*!< Specifies the source base address for DMAy Channelx. */
    DMA_LLI LLI; /*!< Specifies the next linked item   */
    uint32_t DMA_TransSize;/*!< Specifies the source  transfer size    */
    uint32_t DMA_SrcBurst; /*!< Specifies the source  burst size    */
    uint32_t DMA_DestBurst; /*!< Specifies the destination burst size   */
    uint32_t DMA_SrcWidth; /*!< Specifies the source transfer width   */
    uint32_t DMA_DestWidth; /*!< Specifies the destination transfer width   */
    uint32_t DMA_SrcInc;  /*!< Specifies whether the source is incremented or not */
    uint32_t DMA_DestInc; /*!< Specifies whether the destination is incremented or not */
    uint32_t DMA_TermInt; /*!< Specifies whether the terminal count interrupt enabled or not */
    
    /*!< Specifies the features set by channel config register */
    uint32_t  DMA_SrcPeripheral;
    uint32_t  DMA_DestPeripheral;
    uint32_t  DMA_TransferType;       

}DMA_InitTypeDef;

typedef struct
{
    uint32_t DestAddr;
    uint32_t SrcAddr;
    uint32_t next;
    uint32_t control;
    
}DMA_LLI;

typedef enum {DISABLE = 0, ENABLE = !DISABLE} FunctionalState;
#endif