TextLCD - Change to "#define DEFAULT 1" → "#define DEFAULT …

Users » st17099ng » Code » TextLCD

Change to "#define DEFAULT 1" → "#define DEFAULT 0" and "#define LCM1602 0" → "#define LCM1602 1" in the TextLCD_Config.h

Dependents: Test_TextLCD_F303K

TextLCD.cpp@33:900a94bc7585, 2014-08-28 (annotated)

Committer:: wim
Date:: Thu Aug 28 15:44:08 2014 +0000
Revision:: 33:900a94bc7585
Parent:: 32:59c4b8f648d4
Child:: 34:e5a0dcb43ecc

Added support for controllers US2066/SSD1311 (OLED), added setUDCBlink method for supported devices (eg SSD1803), fixed issue in setPower()

Who changed what in which revision?

User	Revision	Line number	New contents of line
simon	1:ac48b187213c	1	/* mbed TextLCD Library, for a 4-bit LCD based on HD44780
simon	6:e4cb7ddee0d3	2	* Copyright (c) 2007-2010, sford, http://mbed.org
wim	14:0c32b66b14b8	3	* 2013, v01: WH, Added LCD types, fixed LCD address issues, added Cursor and UDCs
wim	14:0c32b66b14b8	4	* 2013, v02: WH, Added I2C and SPI bus interfaces
wim	15:b70ebfffb258	5	* 2013, v03: WH, Added support for LCD40x4 which uses 2 controllers
wim	18:bd65dc10f27f	6	* 2013, v04: WH, Added support for Display On/Off, improved 4bit bootprocess
wim	18:bd65dc10f27f	7	* 2013, v05: WH, Added support for 8x2B, added some UDCs
wim	19:c747b9e2e7b8	8	* 2013, v06: WH, Added support for devices that use internal DC/DC converters
wim	20:e0da005a777f	9	* 2013, v07: WH, Added support for backlight and include portdefinitions for LCD2004 Module from DFROBOT
wim	22:35742ec80c24	10	* 2014, v08: WH, Refactored in Base and Derived Classes to deal with mbed lib change regarding 'NC' defined pins
wim	25:6162b31128c9	11	* 2014, v09: WH/EO, Added Class for Native SPI controllers such as ST7032
wim	26:bd897a001012	12	* 2014, v10: WH, Added Class for Native I2C controllers such as ST7032i, Added support for MCP23008 I2C portexpander, Added support for Adafruit module
wim	30:033048611c01	13	* 2014, v11: WH, Added support for native I2C controllers such as PCF21XX, Improved the _initCtrl() method to deal with differences between all supported controllers
wim	32:59c4b8f648d4	14	* 2014, v12: WH, Added support for native I2C controller PCF2119 and native I2C/SPI controllers SSD1803, ST7036, added setContrast method (by JH1PJL) for supported devices (eg ST7032i)
wim	33:900a94bc7585	15	* 2014, v13: WH, Added support for controllers US2066/SSD1311 (OLED), added setUDCBlink method for supported devices (eg SSD1803), fixed issue in setPower()
wim	33:900a94bc7585	16	*@Todo Add AC780S/KS0066i
simon	1:ac48b187213c	17	*
simon	1:ac48b187213c	18	* Permission is hereby granted, free of charge, to any person obtaining a copy
simon	1:ac48b187213c	19	* of this software and associated documentation files (the "Software"), to deal
simon	1:ac48b187213c	20	* in the Software without restriction, including without limitation the rights
simon	1:ac48b187213c	21	* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
simon	1:ac48b187213c	22	* copies of the Software, and to permit persons to whom the Software is
simon	1:ac48b187213c	23	* furnished to do so, subject to the following conditions:
simon	1:ac48b187213c	24	*
simon	1:ac48b187213c	25	* The above copyright notice and this permission notice shall be included in
simon	1:ac48b187213c	26	* all copies or substantial portions of the Software.
simon	1:ac48b187213c	27	*
simon	1:ac48b187213c	28	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
simon	1:ac48b187213c	29	* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
simon	1:ac48b187213c	30	* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
simon	1:ac48b187213c	31	* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
simon	1:ac48b187213c	32	* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
simon	1:ac48b187213c	33	* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
simon	1:ac48b187213c	34	* THE SOFTWARE.
simon	1:ac48b187213c	35	*/
simon	1:ac48b187213c	36
simon	1:ac48b187213c	37	#include "TextLCD.h"
simon	1:ac48b187213c	38	#include "mbed.h"
simon	1:ac48b187213c	39
wim	30:033048611c01	40	//For Testing only
wim	30:033048611c01	41	//DigitalOut led1(LED1);
wim	30:033048611c01	42	//DigitalOut led2(LED2);
wim	30:033048611c01	43	// led2=!led2;
wim	29:a3663151aa65	44
wim	29:a3663151aa65	45
wim	33:900a94bc7585	46	// User Defined Characters (UDCs) are defined by an 8 byte bitpattern. The P0..P5 form the character pattern.
wim	33:900a94bc7585	47	// P7 P6 P5 P4 P3 P2 P1 P0
wim	33:900a94bc7585	48	// 0 B1 B0 x 0 1 1 1 0
wim	33:900a94bc7585	49	// 1 B1 B0 x 1 0 0 0 1
wim	33:900a94bc7585	50	// . .............
wim	33:900a94bc7585	51	// 7 B1 B0 x 1 0 0 0 1
wim	33:900a94bc7585	52	//
wim	33:900a94bc7585	53	// Blinking UDCs are enabled when a specific controlbit (BE) is set.
wim	33:900a94bc7585	54	// The blinking pixels in the UDC can be controlled by setting additional bits in the UDC bitpattern.
wim	33:900a94bc7585	55	// Bit 6 and Bit 7 in the pattern will control the blinking mode when Blink is enabled through BE.
wim	33:900a94bc7585	56	// B1 B0 Mode
wim	33:900a94bc7585	57	// 0 0 No Blinking in this row of the UDC
wim	33:900a94bc7585	58	// 0 1 Enabled pixels in P4 will blink
wim	33:900a94bc7585	59	// 1 x Enabled pixels in P0..P4 will blink
wim	33:900a94bc7585	60
wim	30:033048611c01	61	/** Some sample User Defined Chars 5x7 dots */
wim	32:59c4b8f648d4	62	//const char udc_ae[] = {0x00, 0x00, 0x1B, 0x05, 0x1F, 0x14, 0x1F, 0x00}; //æ
wim	32:59c4b8f648d4	63	//const char udc_0e[] = {0x00, 0x00, 0x0E, 0x13, 0x15, 0x19, 0x0E, 0x00}; //ø
wim	32:59c4b8f648d4	64	//const char udc_ao[] = {0x0E, 0x0A, 0x0E, 0x01, 0x0F, 0x11, 0x0F, 0x00}; //å
wim	32:59c4b8f648d4	65	//const char udc_AE[] = {0x0F, 0x14, 0x14, 0x1F, 0x14, 0x14, 0x17, 0x00}; //Æ
wim	32:59c4b8f648d4	66	//const char udc_0E[] = {0x0E, 0x13, 0x15, 0x15, 0x15, 0x19, 0x0E, 0x00}; //Ø
wim	32:59c4b8f648d4	67	//const char udc_Ao[] = {0x0E, 0x0A, 0x0E, 0x11, 0x1F, 0x11, 0x11, 0x00}; //Å
wim	32:59c4b8f648d4	68	//const char udc_PO[] = {0x04, 0x0A, 0x0A, 0x1F, 0x1B, 0x1B, 0x1F, 0x00}; //Padlock Open
wim	32:59c4b8f648d4	69	//const char udc_PC[] = {0x1C, 0x10, 0x08, 0x1F, 0x1B, 0x1B, 0x1F, 0x00}; //Padlock Closed
wim	32:59c4b8f648d4	70
wim	32:59c4b8f648d4	71	//const char udc_alpha[] = {0x00, 0x00, 0x0D, 0x12, 0x12, 0x12, 0x0D, 0x00}; //alpha
wim	32:59c4b8f648d4	72	//const char udc_ohm[] = {0x0E, 0x11, 0x11, 0x11, 0x0A, 0x0A, 0x1B, 0x00}; //ohm
wim	32:59c4b8f648d4	73	//const char udc_sigma[] = {0x1F, 0x08, 0x04, 0x02, 0x04, 0x08, 0x1F, 0x00}; //sigma
wim	32:59c4b8f648d4	74	//const char udc_pi[] = {0x1F, 0x0A, 0x0A, 0x0A, 0x0A, 0x0A, 0x0A, 0x00}; //pi
wim	32:59c4b8f648d4	75	//const char udc_root[] = {0x07, 0x04, 0x04, 0x04, 0x14, 0x0C, 0x04, 0x00}; //root
wim	30:033048611c01	76
wim	30:033048611c01	77	const char udc_0[] = {0x18, 0x14, 0x12, 0x11, 0x12, 0x14, 0x18, 0x00}; // \|>
wim	30:033048611c01	78	const char udc_1[] = {0x03, 0x05, 0x09, 0x11, 0x09, 0x05, 0x03, 0x00}; // <\|
wim	30:033048611c01	79	const char udc_2[] = {0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x00}; // \|
wim	30:033048611c01	80	const char udc_3[] = {0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x00}; // \|\|
wim	30:033048611c01	81	const char udc_4[] = {0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x00}; // \|\|\|
wim	30:033048611c01	82	const char udc_5[] = {0x00, 0x1f, 0x00, 0x1f, 0x00, 0x1f, 0x00, 0x00}; // =
wim	30:033048611c01	83	const char udc_6[] = {0x15, 0x0a, 0x15, 0x0a, 0x15, 0x0a, 0x15, 0x00}; // checkerboard
wim	30:033048611c01	84	const char udc_7[] = {0x10, 0x08, 0x04, 0x02, 0x01, 0x00, 0x10, 0x00}; // \
wim	30:033048611c01	85
wim	30:033048611c01	86	const char udc_degr[] = {0x06, 0x09, 0x09, 0x06, 0x00, 0x00, 0x00, 0x00}; // Degree symbol
wim	30:033048611c01	87
wim	30:033048611c01	88	const char udc_TM_T[] = {0x1F, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x00}; // Trademark T
wim	30:033048611c01	89	const char udc_TM_M[] = {0x11, 0x1B, 0x15, 0x11, 0x00, 0x00, 0x00, 0x00}; // Trademark M
wim	30:033048611c01	90
wim	30:033048611c01	91	//const char udc_Bat_Hi[] = {0x0E, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x00}; // Battery Full
wim	30:033048611c01	92	//const char udc_Bat_Ha[] = {0x0E, 0x11, 0x13, 0x17, 0x1F, 0x1F, 0x1F, 0x00}; // Battery Half
wim	30:033048611c01	93	//const char udc_Bat_Lo[] = {0x0E, 0x11, 0x11, 0x11, 0x11, 0x11, 0x1F, 0x00}; // Battery Low
wim	33:900a94bc7585	94	//const char udc_Bat_Hi[] = {0x0E, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x00}; // Battery Full
wim	33:900a94bc7585	95	//const char udc_Bat_Ha[] = {0x0E, 0x11, 0x11, 0x1F, 0x1F, 0x1F, 0x1F, 0x00}; // Battery Half
wim	33:900a94bc7585	96	//const char udc_Bat_Lo[] = {0x0E, 0x11, 0x11, 0x11, 0x11, 0x1F, 0x1F, 0x00}; // Battery Low
wim	33:900a94bc7585	97	const char udc_Bat_Hi[] = {0x8E, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x9F, 0x00}; // Battery Full, Blink
wim	33:900a94bc7585	98	const char udc_Bat_Ha[] = {0x8E, 0x91, 0x91, 0x9F, 0x9F, 0x9F, 0x9F, 0x00}; // Battery Half, Blink
wim	33:900a94bc7585	99	const char udc_Bat_Lo[] = {0x8E, 0x91, 0x91, 0x91, 0x91, 0x9F, 0x9F, 0x00}; // Battery Low, Blink
wim	30:033048611c01	100	const char udc_AC[] = {0x0A, 0x0A, 0x1F, 0x11, 0x0E, 0x04, 0x04, 0x00}; // AC Power
wim	30:033048611c01	101
wim	30:033048611c01	102	//const char udc_smiley[] = {0x00, 0x0A, 0x00, 0x04, 0x11, 0x0E, 0x00, 0x00}; // Smiley
wim	30:033048611c01	103	//const char udc_droopy[] = {0x00, 0x0A, 0x00, 0x04, 0x00, 0x0E, 0x11, 0x00}; // Droopey
wim	30:033048611c01	104	//const char udc_note[] = {0x01, 0x03, 0x05, 0x09, 0x0B, 0x1B, 0x18, 0x00}; // Note
wim	30:033048611c01	105
wim	30:033048611c01	106	//const char udc_bar_1[] = {0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x00}; // Bar 1
wim	30:033048611c01	107	//const char udc_bar_2[] = {0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x00}; // Bar 11
wim	30:033048611c01	108	//const char udc_bar_3[] = {0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x00}; // Bar 111
wim	30:033048611c01	109	//const char udc_bar_4[] = {0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x00}; // Bar 1111
wim	30:033048611c01	110	//const char udc_bar_5[] = {0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x00}; // Bar 11111
wim	30:033048611c01	111
wim	30:033048611c01	112	//const char udc_ch_1[] = {0x1f, 0x00, 0x1f, 0x00, 0x1f, 0x00, 0x1f, 0x00}; // Hor bars 4
wim	30:033048611c01	113	//const char udc_ch_2[] = {0x00, 0x1f, 0x00, 0x1f, 0x00, 0x1f, 0x00, 0x1f}; // Hor bars 4 (inverted)
wim	30:033048611c01	114	//const char udc_ch_3[] = {0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15, 0x15}; // Ver bars 3
wim	30:033048611c01	115	//const char udc_ch_4[] = {0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a}; // Ver bars 3 (inverted)
wim	30:033048611c01	116	//const char udc_ch_yr[] = {0x08, 0x0f, 0x12, 0x0f, 0x0a, 0x1f, 0x02, 0x02}; // Year (kana)
wim	30:033048611c01	117	//const char udc_ch_mo[] = {0x0f, 0x09, 0x0f, 0x09, 0x0f, 0x09, 0x09, 0x13}; // Month (kana)
wim	30:033048611c01	118	//const char udc_ch_dy[] = {0x1f, 0x11, 0x11, 0x1f, 0x11, 0x11, 0x11, 0x1F}; // Day (kana)
wim	30:033048611c01	119	//const char udc_ch_mi[] = {0x0C, 0x0a, 0x11, 0x1f, 0x09, 0x09, 0x09, 0x13}; // minute (kana)
wim	30:033048611c01	120
wim	33:900a94bc7585	121	//const char udc_bell[] = {0x04,0x0E,0x0E,0x0E,0x1F,0x00,0x04};
wim	33:900a94bc7585	122	//const char udc_note[] = {0x02,0x03,0x02,0x0E,0x1E,0x0C,0x00};
wim	33:900a94bc7585	123	//const char udc_clock[] = {0x00,0x0E,0x15,0x17,0x11,0x0E,0x00};
wim	33:900a94bc7585	124	//const char udc_heart[] = {0x00,0x0a,0x1F,0x1F,0x0E,0x04,0x00};
wim	33:900a94bc7585	125	//const char udc_duck[] = {0x00,0x0c,0x1D,0x0F,0x0F,0x06,0x00};
wim	33:900a94bc7585	126	//const char udc_check[] = {0x00,0x01,0x03,0x16,0x1C,0x08,0x00};
wim	33:900a94bc7585	127	//const char udc_cross[] = {0x00,0x1B,0x0E,0x04,0x0E,0x1B,0x00};
wim	33:900a94bc7585	128	//const char udc_retarrow[] = {0x01,0x01,0x05,0x09,0x1f,0x08,0x04};
wim	33:900a94bc7585	129
wim	32:59c4b8f648d4	130	const char udc_None[] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
wim	32:59c4b8f648d4	131	const char udc_All[] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
wim	30:033048611c01	132
wim	21:9eb628d9e164	133	/** Create a TextLCD_Base interface
wim	15:b70ebfffb258	134	*
wim	21:9eb628d9e164	135	* @param type Sets the panel size/addressing mode (default = LCD16x2)
wim	21:9eb628d9e164	136	* @param ctrl LCD controller (default = HD44780)
wim	15:b70ebfffb258	137	*/
wim	21:9eb628d9e164	138	TextLCD_Base::TextLCD_Base(LCDType type, LCDCtrl ctrl) : _type(type), _ctrl(ctrl) {
wim	30:033048611c01	139
wim	30:033048611c01	140	// Extract LCDType data
wim	30:033048611c01	141
wim	30:033048611c01	142	// Columns encoded in b7..b0
wim	30:033048611c01	143	_nr_cols = (_type & 0xFF);
wim	30:033048611c01	144
wim	30:033048611c01	145	// Rows encoded in b15..b8
wim	30:033048611c01	146	_nr_rows = ((_type >> 8) & 0xFF);
wim	30:033048611c01	147
wim	30:033048611c01	148	// Addressing mode encoded in b19..b16
wim	30:033048611c01	149	_addr_mode = _type & LCD_T_ADR_MSK;
wim	14:0c32b66b14b8	150	}
wim	14:0c32b66b14b8	151
wim	14:0c32b66b14b8	152
wim	21:9eb628d9e164	153	/** Init the LCD Controller(s)
wim	21:9eb628d9e164	154	* Clear display
wim	21:9eb628d9e164	155	*/
wim	21:9eb628d9e164	156	void TextLCD_Base::_init() {
wim	15:b70ebfffb258	157
wim	15:b70ebfffb258	158	// Select and configure second LCD controller when needed
wim	15:b70ebfffb258	159	if(_type==LCD40x4) {
wim	30:033048611c01	160	_ctrl_idx=_LCDCtrl_1; // Select 2nd controller
wim	30:033048611c01	161	_initCtrl(); // Init 2nd controller
wim	15:b70ebfffb258	162	}
wim	15:b70ebfffb258	163
wim	15:b70ebfffb258	164	// Select and configure primary LCD controller
wim	27:22d5086f6ba6	165	_ctrl_idx=_LCDCtrl_0; // Select primary controller
wim	19:c747b9e2e7b8	166	_initCtrl(); // Init primary controller
wim	28:30fa94f7341c	167
wim	32:59c4b8f648d4	168	// Clear whole display and Reset Cursor location
wim	32:59c4b8f648d4	169	// Note: This will make sure that some 3-line displays that skip topline of a 4-line configuration
wim	32:59c4b8f648d4	170	// are cleared and init cursor correctly.
wim	32:59c4b8f648d4	171	cls();
wim	15:b70ebfffb258	172	}
wim	15:b70ebfffb258	173
wim	21:9eb628d9e164	174	/** Init the LCD controller
wim	21:9eb628d9e164	175	* 4-bit mode, number of lines, fonttype, no cursor etc
wim	30:033048611c01	176	*
wim	30:033048611c01	177	* Note: some configurations are commented out because they have not yet been tested due to lack of hardware
wim	21:9eb628d9e164	178	*/
wim	21:9eb628d9e164	179	void TextLCD_Base::_initCtrl() {
wim	32:59c4b8f648d4	180	int _bias_lines=0; // Set Bias and lines (Instr Set 1), temporary variable.
wim	32:59c4b8f648d4	181	int _lines=0; // Set lines (Ext Instr Set), temporary variable.
wim	32:59c4b8f648d4	182
wim	26:bd897a001012	183	this->_setRS(false); // command mode
wim	13:24506ba22480	184
wim	26:bd897a001012	185	wait_ms(20); // Wait 20ms to ensure powered up
simon	1:ac48b187213c	186
wim	33:900a94bc7585	187	// The Controller could be in 8 bit mode (power-on reset) or in 4 bit mode (warm reboot) at this point.
wim	33:900a94bc7585	188	// Follow this procedure to make sure the Controller enters the correct state. The hardware interface
wim	33:900a94bc7585	189	// between the uP and the LCD can only write the 4 most significant bits (Most Significant Nibble, MSN).
wim	33:900a94bc7585	190	// In 4 bit mode the LCD expects the MSN first, followed by the LSN.
wim	33:900a94bc7585	191	//
wim	33:900a94bc7585	192	// Current state: 8 bit mode \| 4 bit mode, MSN is next \| 4 bit mode, LSN is next
wim	33:900a94bc7585	193	//-------------------------------------------------------------------------------------------------
wim	33:900a94bc7585	194	_writeNibble(0x3); // set 8 bit mode (MSN) and dummy LSN, \| set 8 bit mode (MSN), \| set dummy LSN,
wim	33:900a94bc7585	195	// remains in 8 bit mode \| change to 8 bit mode \| remains in 4 bit mode
wim	33:900a94bc7585	196	wait_ms(15); //
wim	33:900a94bc7585	197
wim	33:900a94bc7585	198	_writeNibble(0x3); // set 8 bit mode and dummy LSN, \| set 8 bit mode and dummy LSN, \| set 8bit mode (MSN),
wim	33:900a94bc7585	199	// remains in 8 bit mode \| remains in 8 bit mode \| remains in 4 bit mode
wim	33:900a94bc7585	200	wait_ms(15); //
wim	33:900a94bc7585	201
wim	33:900a94bc7585	202	_writeNibble(0x3); // set 8 bit mode and dummy LSN, \| set 8 bit mode and dummy LSN, \| set dummy LSN,
wim	33:900a94bc7585	203	// remains in 8 bit mode \| remains in 8 bit mode \| change to 8 bit mode
wim	33:900a94bc7585	204	wait_ms(15); //
wim	33:900a94bc7585	205
wim	33:900a94bc7585	206	// Controller is now in 8 bit mode
wim	33:900a94bc7585	207
wim	33:900a94bc7585	208	_writeNibble(0x2); // Change to 4-bit mode (MSN), the LSN is undefined dummy
wim	17:652ab113bc2e	209	wait_us(40); // most instructions take 40us
wim	18:bd65dc10f27f	210
wim	18:bd65dc10f27f	211	// Display is now in 4-bit mode
wim	33:900a94bc7585	212	// Note: 4/8 bit mode is ignored for most native SPI and I2C devices. They dont use the parallel bus.
wim	33:900a94bc7585	213	// However, _writeNibble() method is void anyway for native SPI and I2C devices.
wim	25:6162b31128c9	214
wim	29:a3663151aa65	215	// Device specific initialisations: DC/DC converter to generate VLCD or VLED, number of lines etc
wim	19:c747b9e2e7b8	216	switch (_ctrl) {
wim	32:59c4b8f648d4	217
wim	29:a3663151aa65	218	case KS0078:
wim	29:a3663151aa65	219	// Initialise Display configuration
wim	29:a3663151aa65	220	switch (_type) {
wim	29:a3663151aa65	221	case LCD8x1: //8x1 is a regular 1 line display
wim	29:a3663151aa65	222	case LCD8x2B: //8x2B is a special case of 16x1
wim	29:a3663151aa65	223	// case LCD12x1:
wim	29:a3663151aa65	224	case LCD16x1:
wim	30:033048611c01	225	// case LCD20x1:
wim	29:a3663151aa65	226	case LCD24x1:
wim	32:59c4b8f648d4	227	_function = 0x02; // Function set 001 DL N RE(0) DH REV (Std Regs)
wim	32:59c4b8f648d4	228	// DL=0 (4 bits bus)
wim	32:59c4b8f648d4	229	// N=0 (1 line mode), N=1 (2 line mode)
wim	32:59c4b8f648d4	230	// RE=0 (Dis. Extended Regs, special mode for KS0078)
wim	32:59c4b8f648d4	231	// DH=1 (Disp shift enable, special mode for KS0078)
wim	32:59c4b8f648d4	232	// REV=0 (Reverse normal, special mode for KS0078)
wim	32:59c4b8f648d4	233
wim	33:900a94bc7585	234	_function_1 = 0x04; // Function set 001 DL N RE(1) BE 0 (Ext Regs)
wim	32:59c4b8f648d4	235	// DL=0 (4 bits bus)
wim	32:59c4b8f648d4	236	// N=0 (1 line mode), N=1 (2 line mode)
wim	32:59c4b8f648d4	237	// RE=1 (Ena Extended Regs, special mode for KS0078)
wim	32:59c4b8f648d4	238	// BE=0 (Blink Enable, CG/SEG RAM, special mode for KS0078)
wim	32:59c4b8f648d4	239	// 0
wim	30:033048611c01	240
wim	32:59c4b8f648d4	241	_function_x = 0x00; // Ext Function set 0000 1 FW BW NW (Ext Regs)
wim	32:59c4b8f648d4	242	// NW=0 (1,2 line), NW=1 (4 Line, special mode for KS0078)
wim	29:a3663151aa65	243	break;
wim	29:a3663151aa65	244
wim	32:59c4b8f648d4	245	// case LCD12x3D: // Special mode for KS0078 and PCF21XX
wim	32:59c4b8f648d4	246	// case LCD12x3D1: // Special mode for KS0078 and PCF21XX
wim	32:59c4b8f648d4	247	// case LCD12x4D: // Special mode for KS0078 and PCF21XX
wim	32:59c4b8f648d4	248	// case LCD16x3D: // Special mode for KS0078
wim	32:59c4b8f648d4	249	// case LCD16x4D: // Special mode for KS0078
wim	30:033048611c01	250	// case LCD24x3D: // Special mode for KS0078
wim	30:033048611c01	251	// case LCD24x3D1: // Special mode for KS0078
wim	30:033048611c01	252	case LCD24x4D: // Special mode for KS0078
wim	32:59c4b8f648d4	253	_function = 0x02; // Function set 001 DL N RE(0) DH REV (Std Regs)
wim	32:59c4b8f648d4	254	// DL=0 (4 bits bus)
wim	32:59c4b8f648d4	255	// N=0 (dont care for 4 line mode)
wim	32:59c4b8f648d4	256	// RE=0 (Dis. Extended Regs, special mode for KS0078)
wim	32:59c4b8f648d4	257	// DH=1 (Disp shift enable, special mode for KS0078)
wim	32:59c4b8f648d4	258	// REV=0 (Reverse normal, special mode for KS0078)
wim	32:59c4b8f648d4	259
wim	33:900a94bc7585	260	_function_1 = 0x04; // Function set 001 DL N RE(1) BE 0 (Ext Regs)
wim	32:59c4b8f648d4	261	// DL=0 (4 bits bus)
wim	32:59c4b8f648d4	262	// N=0 (1 line mode), N=1 (2 line mode)
wim	32:59c4b8f648d4	263	// RE=1 (Ena Extended Regs, special mode for KS0078)
wim	32:59c4b8f648d4	264	// BE=0 (Blink Enable, CG/SEG RAM, special mode for KS0078)
wim	32:59c4b8f648d4	265	// 0
wim	29:a3663151aa65	266
wim	32:59c4b8f648d4	267	_function_x = 0x01; // Ext Function set 0000 1 FW BW NW (Ext Regs)
wim	32:59c4b8f648d4	268	// NW=0 (1,2 line), NW=1 (4 Line, special mode for KS0078)
wim	30:033048611c01	269	break;
wim	33:900a94bc7585	270
wim	33:900a94bc7585	271	case LCD16x3G: // Special mode for ST7036
wim	33:900a94bc7585	272	error("Error: LCD Controller type does not support this Display type\n\r");
wim	33:900a94bc7585	273	break;
wim	30:033048611c01	274
wim	29:a3663151aa65	275	default:
wim	30:033048611c01	276	// All other LCD types are initialised as 2 Line displays (including LCD16x1C and LCD40x4)
wim	32:59c4b8f648d4	277	_function = 0x0A; // Function set 001 DL N RE(0) DH REV (Std Regs)
wim	32:59c4b8f648d4	278	// DL=0 (4 bits bus)
wim	32:59c4b8f648d4	279	// N=1 (1 line mode), N=1 (2 line mode)
wim	32:59c4b8f648d4	280	// RE=0 (Dis. Extended Regs, special mode for KS0078)
wim	32:59c4b8f648d4	281	// DH=1 (Disp shift enable, special mode for KS0078)
wim	32:59c4b8f648d4	282	// REV=0 (Reverse normal, special mode for KS0078)
wim	32:59c4b8f648d4	283
wim	33:900a94bc7585	284	_function_1 = 0x0C; // Function set 001 DL N RE(1) BE 0 (Ext Regs)
wim	32:59c4b8f648d4	285	// DL=0 (4 bits bus)
wim	32:59c4b8f648d4	286	// N=1 (1 line mode), N=1 (2 line mode)
wim	32:59c4b8f648d4	287	// RE=1 (Ena Extended Regs, special mode for KS0078)
wim	32:59c4b8f648d4	288	// BE=0 (Blink Enable, CG/SEG RAM, special mode for KS0078)
wim	32:59c4b8f648d4	289	// 0
wim	30:033048611c01	290
wim	32:59c4b8f648d4	291	_function_x = 0x00; // Ext Function set 0000 1 FW BW NW (Ext Regs)
wim	32:59c4b8f648d4	292	// NW=0 (1,2 line), NW=1 (4 Line, special mode for KS0078)
wim	29:a3663151aa65	293	break;
wim	29:a3663151aa65	294	} // switch type
wim	29:a3663151aa65	295
wim	32:59c4b8f648d4	296	// init special features
wim	32:59c4b8f648d4	297	_writeCommand(0x20 \| _function_1);// Function set 001 DL N RE(1) BE 0 (Ext Regs)
wim	32:59c4b8f648d4	298	// DL=0 (4 bits bus), DL=1 (8 bits mode)
wim	32:59c4b8f648d4	299	// N=0 (1 line mode), N=1 (2 line mode)
wim	32:59c4b8f648d4	300	// RE=1 (Ena Extended Regs, special mode for KS0078)
wim	32:59c4b8f648d4	301	// BE=0 (Blink Enable/Disable, CG/SEG RAM, special mode for KS0078)
wim	32:59c4b8f648d4	302	// 0
wim	32:59c4b8f648d4	303
wim	32:59c4b8f648d4	304	_writeCommand(0x08 \| _function_x); // Ext Function set 0000 1 FW BW NW (Ext Regs)
wim	32:59c4b8f648d4	305	// FW=0 (5-dot font, special mode for KS0078)
wim	32:59c4b8f648d4	306	// BW=0 (Cur BW invert disable, special mode for KS0078)
wim	32:59c4b8f648d4	307	// NW=0 (1,2 Line), NW=1 (4 line, special mode for KS0078)
wim	32:59c4b8f648d4	308
wim	32:59c4b8f648d4	309	_writeCommand(0x10); // Scroll/Shift set 0001 DS/HS4 DS/HS3 DS/HS2 DS/HS1 (Ext Regs)
wim	32:59c4b8f648d4	310	// Dotscroll/Display shift enable (Special mode for KS0078)
wim	32:59c4b8f648d4	311
wim	32:59c4b8f648d4	312	_writeCommand(0x80); // Scroll Quantity set 1 0 SQ5 SQ4 SQ3 SQ2 SQ1 SQ0 (Ext Regs)
wim	32:59c4b8f648d4	313	// Scroll quantity (Special mode for KS0078)
wim	32:59c4b8f648d4	314
wim	32:59c4b8f648d4	315	_writeCommand(0x20 \| _function); // Function set 001 DL N RE(0) DH REV (Std Regs)
wim	32:59c4b8f648d4	316	// DL=0 (4 bits bus), DL=1 (8 bits mode)
wim	32:59c4b8f648d4	317	// N=0 (1 line mode), N=1 (2 line mode)
wim	32:59c4b8f648d4	318	// RE=0 (Dis. Extended Regs, special mode for KS0078)
wim	32:59c4b8f648d4	319	// DH=1 (Disp shift enable/disable, special mode for KS0078)
wim	32:59c4b8f648d4	320	// REV=0 (Reverse/Normal, special mode for KS0078)
wim	29:a3663151aa65	321	break; // case KS0078 Controller
wim	29:a3663151aa65	322
wim	26:bd897a001012	323	case ST7032_3V3:
wim	26:bd897a001012	324	// ST7032 controller: Initialise Voltage booster for VLCD. VDD=3V3
wim	26:bd897a001012	325	case ST7032_5V:
wim	32:59c4b8f648d4	326	// ST7032 controller: Disable Voltage booster for VLCD. VDD=5V
wim	29:a3663151aa65	327
wim	29:a3663151aa65	328	// Initialise Display configuration
wim	29:a3663151aa65	329	switch (_type) {
wim	29:a3663151aa65	330	case LCD8x1: //8x1 is a regular 1 line display
wim	29:a3663151aa65	331	case LCD8x2B: //8x2B is a special case of 16x1
wim	29:a3663151aa65	332	// case LCD12x1:
wim	29:a3663151aa65	333	case LCD16x1:
wim	30:033048611c01	334	// case LCD20x1:
wim	32:59c4b8f648d4	335	case LCD24x1:
wim	32:59c4b8f648d4	336	_function = 0x00; // FUNCTION SET 0 0 1 DL=0 (4 bit), N=0 (1-line display mode), F=0 (5*7dot), 0, IS
wim	32:59c4b8f648d4	337	// Note: 4 bit mode is ignored for native SPI and I2C devices
wim	32:59c4b8f648d4	338	// Saved to allow switch between Instruction sets at later time
wim	32:59c4b8f648d4	339	break;
wim	28:30fa94f7341c	340
wim	32:59c4b8f648d4	341	case LCD12x3D: // Special mode for KS0078 and PCF21XX
wim	32:59c4b8f648d4	342	case LCD12x3D1: // Special mode for KS0078 and PCF21XX
wim	32:59c4b8f648d4	343	case LCD12x4D: // Special mode for KS0078 and PCF21XX
wim	33:900a94bc7585	344	case LCD16x3G: // Special mode for ST7036
wim	32:59c4b8f648d4	345	case LCD24x4D: // Special mode for KS0078
wim	32:59c4b8f648d4	346	error("Error: LCD Controller type does not support this Display type\n\r");
wim	30:033048611c01	347	break;
wim	29:a3663151aa65	348
wim	32:59c4b8f648d4	349	default:
wim	32:59c4b8f648d4	350	// All other LCD types are initialised as 2 Line displays
wim	32:59c4b8f648d4	351	_function = 0x08; // FUNCTION SET 0 0 1 DL=0 (4 bit), N=1 (2-line display mode), F=0 (5*7dot), 0, IS
wim	32:59c4b8f648d4	352	// Note: 4 bit mode is ignored for native SPI and I2C devices
wim	32:59c4b8f648d4	353	// Saved to allow switch between Instruction sets at later time
wim	32:59c4b8f648d4	354	break;
wim	32:59c4b8f648d4	355	} // switch type
wim	32:59c4b8f648d4	356
wim	32:59c4b8f648d4	357	// init special features
wim	33:900a94bc7585	358	_writeCommand(0x20 \| _function \| 0x01); // Set function, 0 0 1 DL N F 0 IS=1 Select Instr Set = 1
wim	33:900a94bc7585	359
wim	33:900a94bc7585	360	_writeCommand(0x1C); // Internal OSC frequency adjustment Framefreq=183HZ, Bias will be 1/4 (Instr Set=1)
wim	32:59c4b8f648d4	361
wim	32:59c4b8f648d4	362	_contrast = LCD_ST7032_CONTRAST;
wim	32:59c4b8f648d4	363	_writeCommand(0x70 \| (_contrast & 0x0F)); // Set Contrast Low bits, 0 1 1 1 C3 C2 C1 C0 (IS=1)
wim	32:59c4b8f648d4	364
wim	32:59c4b8f648d4	365
wim	32:59c4b8f648d4	366	if (_ctrl == ST7032_3V3) {
wim	32:59c4b8f648d4	367	_icon_power = 0x04; // Icon display off, Booster circuit is turned on (IS=1)
wim	32:59c4b8f648d4	368	// Saved to allow contrast change at later time
wim	32:59c4b8f648d4	369	}
wim	32:59c4b8f648d4	370	else {
wim	32:59c4b8f648d4	371	_icon_power = 0x00; // Icon display off, Booster circuit is turned off (IS=1)
wim	32:59c4b8f648d4	372	// Saved to allow contrast change at later time
wim	32:59c4b8f648d4	373	}
wim	32:59c4b8f648d4	374	_writeCommand(0x50 \| _icon_power \| ((_contrast >> 4) & 0x03)); // Set Icon, Booster and Contrast High bits, 0 1 0 1 Ion Bon C5 C4 (IS=1)
wim	32:59c4b8f648d4	375	wait_ms(10); // Wait 10ms to ensure powered up
wim	32:59c4b8f648d4	376
wim	32:59c4b8f648d4	377	_writeCommand(0x68 \| (LCD_ST7032_RAB & 0x07)); // Voltage follower, 0 1 1 0 FOn=1, Ampl ratio Rab2=1, Rab1=0, Rab0=0 (IS=1)
wim	32:59c4b8f648d4	378	wait_ms(10); // Wait 10ms to ensure powered up
wim	32:59c4b8f648d4	379
wim	32:59c4b8f648d4	380	_writeCommand(0x20 \| _function); // Select Instruction Set = 0
wim	32:59c4b8f648d4	381
wim	32:59c4b8f648d4	382	break; // case ST7032_3V3 Controller
wim	32:59c4b8f648d4	383	// case ST7032_5V Controller
wim	32:59c4b8f648d4	384
wim	32:59c4b8f648d4	385	case ST7036_3V3:
wim	32:59c4b8f648d4	386	// ST7036 controller: Initialise Voltage booster for VLCD. VDD=3V3
wim	32:59c4b8f648d4	387	// Note: supports 1,2 (LCD_T_A) or 3 lines (LCD_T_G)
wim	32:59c4b8f648d4	388	case ST7036_5V:
wim	32:59c4b8f648d4	389	// ST7036 controller: Disable Voltage booster for VLCD. VDD=5V
wim	32:59c4b8f648d4	390	// Note: supports 1,2 (LCD_T_A) or 3 lines (LCD_T_G)
wim	32:59c4b8f648d4	391
wim	32:59c4b8f648d4	392	// Initialise Display configuration
wim	32:59c4b8f648d4	393	switch (_type) {
wim	32:59c4b8f648d4	394	case LCD8x1: //8x1 is a regular 1 line display
wim	32:59c4b8f648d4	395	case LCD8x2B: //8x2D is a special case of 16x1
wim	32:59c4b8f648d4	396	// case LCD12x1:
wim	32:59c4b8f648d4	397	case LCD16x1:
wim	32:59c4b8f648d4	398	case LCD24x1:
wim	32:59c4b8f648d4	399	_function = 0x00; // Set function, 0 0 1 DL=0 (4-bit Databus), N=0 (1 Line), DH=0 (5x7font), IS2, IS1 (Select Instruction Set)
wim	32:59c4b8f648d4	400	// Note: 4 bit mode is ignored for native SPI and I2C devices
wim	32:59c4b8f648d4	401	// Saved to allow switch between Instruction sets at later time
wim	32:59c4b8f648d4	402
wim	32:59c4b8f648d4	403	_bias_lines = 0x04; // Bias: 1/5, 1 or 2-Lines LCD
wim	32:59c4b8f648d4	404	break;
wim	32:59c4b8f648d4	405
wim	32:59c4b8f648d4	406	// case LCD12x3G: // Special mode for ST7036
wim	32:59c4b8f648d4	407	case LCD16x3G: // Special mode for ST7036
wim	32:59c4b8f648d4	408	_function = 0x08; // Set function, 0 0 1 DL=0 (4-bit Databus), N=1 (2 Line), DH=0 (5x7font), IS2,IS1 (Select Instruction Set)
wim	32:59c4b8f648d4	409	// Note: 4 bit mode is ignored for native SPI and I2C devices
wim	32:59c4b8f648d4	410	// Saved to allow switch between Instruction sets at later time
wim	32:59c4b8f648d4	411
wim	32:59c4b8f648d4	412	_bias_lines = 0x05; // Bias: 1/5, 3-Lines LCD
wim	32:59c4b8f648d4	413	break;
wim	32:59c4b8f648d4	414
wim	32:59c4b8f648d4	415	// case LCD12x3D1: // Special mode for KS0078 and PCF21XX
wim	32:59c4b8f648d4	416	// case LCD16x3D1: // Special mode for SSD1803
wim	30:033048611c01	417	case LCD12x4D: // Special mode for PCF2116
wim	30:033048611c01	418	case LCD24x4D: // Special mode for KS0078
wim	30:033048611c01	419	error("Error: LCD Controller type does not support this Display type\n\r");
wim	29:a3663151aa65	420	break;
wim	28:30fa94f7341c	421
wim	29:a3663151aa65	422	default:
wim	32:59c4b8f648d4	423	// All other LCD types are initialised as 2 Line displays (including LCD16x1C and LCD40x4)
wim	32:59c4b8f648d4	424	_function = 0x08; // Set function, 0 0 1 DL=0 (4-bit Databus), N=1 (2 Line), DH=0 (5x7font), IS2,IS1 (Select Instruction Set)
wim	32:59c4b8f648d4	425	// Note: 4 bit mode is ignored for native SPI and I2C devices
wim	32:59c4b8f648d4	426	// Saved to allow switch between Instruction sets at later time
wim	32:59c4b8f648d4	427
wim	32:59c4b8f648d4	428	_bias_lines = 0x04; // Bias: 1/5, 1 or 2-Lines LCD
wim	32:59c4b8f648d4	429	break;
wim	32:59c4b8f648d4	430	} // switch type
wim	32:59c4b8f648d4	431
wim	29:a3663151aa65	432
wim	32:59c4b8f648d4	433	// init special features
wim	33:900a94bc7585	434	_writeCommand(0x20 \| _function \| 0x01); // Set function, IS2,IS1 = 01 (Select Instr Set = 1)
wim	32:59c4b8f648d4	435	_writeCommand(0x10 \| _bias_lines); // Set Bias and 1,2 or 3 lines (Instr Set 1)
wim	29:a3663151aa65	436
wim	32:59c4b8f648d4	437	_contrast = LCD_ST7036_CONTRAST;
wim	32:59c4b8f648d4	438	_writeCommand(0x70 \| (_contrast & 0x0F)); // Set Contrast, 0 1 1 1 C3 C2 C1 C0 (Instr Set 1)
wim	32:59c4b8f648d4	439
wim	32:59c4b8f648d4	440	if (_ctrl == ST7036_3V3) {
wim	32:59c4b8f648d4	441	_icon_power = 0x04; // Set Icon, Booster, Contrast High bits, 0 1 0 1 Ion=0 Bon=1 C5 C4 (Instr Set 1)
wim	32:59c4b8f648d4	442	// Saved to allow contrast change at later time
wim	32:59c4b8f648d4	443	}
wim	32:59c4b8f648d4	444	else {
wim	32:59c4b8f648d4	445	_icon_power = 0x00; // Set Icon, Booster, Contrast High bits, 0 1 0 1 Ion=0 Bon=0 C5 C4 (Instr Set 1)
wim	32:59c4b8f648d4	446	}
wim	29:a3663151aa65	447
wim	32:59c4b8f648d4	448	_writeCommand(0x50 \| _icon_power \| ((_contrast >> 4) & 0x03)); // Set Contrast C5, C4 (Instr Set 1)
wim	32:59c4b8f648d4	449	wait_ms(10); // Wait 10ms to ensure powered up
wim	32:59c4b8f648d4	450
wim	32:59c4b8f648d4	451	_writeCommand(0x68 \| (LCD_ST7036_RAB & 0x07)); // Voltagefollower On = 1, Ampl ratio Rab2, Rab1, Rab0 = 1 0 1 (Instr Set 1)
wim	32:59c4b8f648d4	452	wait_ms(10); // Wait 10ms to ensure powered up
wim	28:30fa94f7341c	453
wim	32:59c4b8f648d4	454	_writeCommand(0x20 \| _function); // Set function, IS2,IS1 = 00 (Select Instruction Set = 0)
wim	32:59c4b8f648d4	455
wim	32:59c4b8f648d4	456	break; // case ST7036_3V3 Controller
wim	32:59c4b8f648d4	457	// case ST7036_5V Controller
wim	32:59c4b8f648d4	458
wim	32:59c4b8f648d4	459	case SSD1803_3V3:
wim	32:59c4b8f648d4	460	// SSD1803 controller: Initialise Voltage booster for VLCD. VDD=3V3
wim	32:59c4b8f648d4	461	// Note: supports 1,2, 3 or 4 lines
wim	32:59c4b8f648d4	462	// case SSD1803_5V:
wim	32:59c4b8f648d4	463	// SSD1803 controller: No Voltage booster for VLCD. VDD=5V
wim	32:59c4b8f648d4	464
wim	29:a3663151aa65	465	// Initialise Display configuration
wim	29:a3663151aa65	466	switch (_type) {
wim	29:a3663151aa65	467	case LCD8x1: //8x1 is a regular 1 line display
wim	30:033048611c01	468	case LCD8x2B: //8x2D is a special case of 16x1
wim	29:a3663151aa65	469	// case LCD12x1:
wim	29:a3663151aa65	470	case LCD16x1:
wim	29:a3663151aa65	471	case LCD24x1:
wim	32:59c4b8f648d4	472	_function = 0x00; // Set function 0 0 1 DL N DH RE(0) IS
wim	32:59c4b8f648d4	473	// Saved to allow switch between Instruction sets at later time
wim	32:59c4b8f648d4	474	// DL=0 4-bit Databus,
wim	32:59c4b8f648d4	475	// Note: 4 bit mode is ignored for native SPI and I2C devices
wim	32:59c4b8f648d4	476	// N=0 1 Line / 3 Line
wim	32:59c4b8f648d4	477	// DH=0 Double Height disable
wim	32:59c4b8f648d4	478	// IS=0
wim	32:59c4b8f648d4	479
wim	33:900a94bc7585	480	_function_1 = 0x02; // Set function, 0 0 1 DL N BE RE(1) REV
wim	32:59c4b8f648d4	481	// Saved to allow switch between Instruction sets at later time
wim	32:59c4b8f648d4	482	// DL=0 4-bit Databus,
wim	32:59c4b8f648d4	483	// Note: 4 bit mode is ignored for native SPI and I2C devices
wim	32:59c4b8f648d4	484	// N=0 1 Line / 3 Line
wim	32:59c4b8f648d4	485	// BE=0 Blink Enable off, special feature of SSD1803
wim	32:59c4b8f648d4	486	// REV=0 Reverse off, special feature of SSD1803
wim	32:59c4b8f648d4	487
wim	32:59c4b8f648d4	488	_lines = 0x00; // Ext function set 0 0 0 0 1 FW BW NW
wim	32:59c4b8f648d4	489	// NW=0 1-Line LCD (N=0)
wim	29:a3663151aa65	490	break;
wim	32:59c4b8f648d4	491
wim	33:900a94bc7585	492	case LCD12x3D: // Special mode for KS0078 and PCF21XX
wim	32:59c4b8f648d4	493	// case LCD12x3D1: // Special mode for KS0078 and PCF21XX
wim	33:900a94bc7585	494	case LCD16x3D: // Special mode for KS0078
wim	32:59c4b8f648d4	495	// case LCD16x3D1: // Special mode for SSD1803
wim	32:59c4b8f648d4	496	// case LCD20x3D: // Special mode for SSD1803
wim	32:59c4b8f648d4	497	_function = 0x00; // Set function 0 0 1 DL N DH RE(0) IS
wim	32:59c4b8f648d4	498	// Saved to allow switch between Instruction sets at later time
wim	32:59c4b8f648d4	499	// DL=0 4-bit Databus,
wim	32:59c4b8f648d4	500	// Note: 4 bit mode is ignored for native SPI and I2C devices
wim	32:59c4b8f648d4	501	// N=0 1 Line / 3 Line
wim	32:59c4b8f648d4	502	// DH=0 Double Height disable
wim	32:59c4b8f648d4	503	// IS=0
wim	32:59c4b8f648d4	504
wim	33:900a94bc7585	505	_function_1 = 0x02; // Set function, 0 0 1 DL N BE RE(1) REV
wim	32:59c4b8f648d4	506	// Saved to allow switch between Instruction sets at later time
wim	32:59c4b8f648d4	507	// DL=0 4-bit Databus,
wim	32:59c4b8f648d4	508	// Note: 4 bit mode is ignored for native SPI and I2C devices
wim	32:59c4b8f648d4	509	// N=0 1 Line / 3 Line
wim	32:59c4b8f648d4	510	// BE=0 Blink Enable off, special feature of SSD1803
wim	32:59c4b8f648d4	511	// REV=0 Reverse off, special feature of SSD1803
wim	32:59c4b8f648d4	512
wim	32:59c4b8f648d4	513	_lines = 0x00; // Ext function set 0 0 0 0 1 FW BW NW
wim	32:59c4b8f648d4	514	// NW=1 3-Line LCD (N=0)
wim	29:a3663151aa65	515	break;
wim	30:033048611c01	516
wim	32:59c4b8f648d4	517	case LCD20x4D: // Special mode for SSD1803
wim	32:59c4b8f648d4	518	_function = 0x08; // Set function 0 0 1 DL N DH RE(0) IS
wim	32:59c4b8f648d4	519	// Saved to allow switch between Instruction sets at later time
wim	32:59c4b8f648d4	520	// DL=0 4-bit Databus,
wim	32:59c4b8f648d4	521	// Note: 4 bit mode is ignored for native SPI and I2C devices
wim	32:59c4b8f648d4	522	// N=1 4 Line
wim	32:59c4b8f648d4	523	// DH=0 Double Height disable
wim	32:59c4b8f648d4	524	// IS=0
wim	32:59c4b8f648d4	525
wim	33:900a94bc7585	526	_function_1 = 0x0A; // Set function, 0 0 1 DL N BE RE(1) REV
wim	32:59c4b8f648d4	527	// Saved to allow switch between Instruction sets at later time
wim	32:59c4b8f648d4	528	// DL=0 4-bit Databus,
wim	32:59c4b8f648d4	529	// Note: 4 bit mode is ignored for native SPI and I2C devices
wim	32:59c4b8f648d4	530	// N=1 4 Line
wim	32:59c4b8f648d4	531	// BE=0 Blink Enable off, special feature of SSD1803
wim	32:59c4b8f648d4	532	// REV=0 Reverse off, special feature of SSD1803
wim	32:59c4b8f648d4	533
wim	32:59c4b8f648d4	534	_lines = 0x01; // Ext function set 0 0 0 0 1 FW BW NW
wim	32:59c4b8f648d4	535	// NW=1 4-Line LCD (N=1)
wim	32:59c4b8f648d4	536	break;
wim	32:59c4b8f648d4	537
wim	33:900a94bc7585	538	case LCD16x3G: // Special mode for ST7036
wim	32:59c4b8f648d4	539	case LCD24x4D: // Special mode for KS0078
wim	30:033048611c01	540	error("Error: LCD Controller type does not support this Display type\n\r");
wim	30:033048611c01	541	break;
wim	30:033048611c01	542
wim	29:a3663151aa65	543	default:
wim	30:033048611c01	544	// All other LCD types are initialised as 2 Line displays (including LCD16x1C and LCD40x4)
wim	32:59c4b8f648d4	545	_function = 0x08; // Set function 0 0 1 DL N DH RE(0) IS
wim	32:59c4b8f648d4	546	// Saved to allow switch between Instruction sets at later time
wim	32:59c4b8f648d4	547	// DL=0 4-bit Databus,
wim	32:59c4b8f648d4	548	// Note: 4 bit mode is ignored for native SPI and I2C devices
wim	32:59c4b8f648d4	549	// N=1 2 line / 4 Line
wim	32:59c4b8f648d4	550	// DH=0 Double Height disable
wim	32:59c4b8f648d4	551	// IS=0
wim	29:a3663151aa65	552
wim	33:900a94bc7585	553	_function_1 = 0x0A; // Set function, 0 0 1 DL N BE RE(1) REV
wim	32:59c4b8f648d4	554	// Saved to allow switch between Instruction sets at later time
wim	32:59c4b8f648d4	555	// DL=0 4-bit Databus,
wim	32:59c4b8f648d4	556	// Note: 4 bit mode is ignored for native SPI and I2C devices
wim	32:59c4b8f648d4	557	// N=1 2 line / 4 Line
wim	32:59c4b8f648d4	558	// BE=0 Blink Enable off, special feature of SSD1803
wim	32:59c4b8f648d4	559	// REV=0 Reverse off, special feature of SSD1803
wim	32:59c4b8f648d4	560
wim	32:59c4b8f648d4	561	_lines = 0x00; // Ext function set 0 0 0 0 1 FW BW NW
wim	32:59c4b8f648d4	562	// NW=0 2-Line LCD (N=1)
wim	32:59c4b8f648d4	563	break;
wim	32:59c4b8f648d4	564	} // switch type
wim	32:59c4b8f648d4	565
wim	32:59c4b8f648d4	566
wim	32:59c4b8f648d4	567	// init special features
wim	33:900a94bc7585	568	_writeCommand(0x20 \| _function_1); // Set function, 0 0 1 DL N BE RE(1) REV
wim	32:59c4b8f648d4	569	// Select Extended Instruction Set
wim	33:900a94bc7585	570
wim	33:900a94bc7585	571	_writeCommand(0x06); // Set ext entry mode, 0 0 0 0 0 1 BDC=1 COM1-32, BDS=0 SEG100-1 "Bottom View" (Ext Instr Set)
wim	33:900a94bc7585	572	// _writeCommand(0x05); // Set ext entry mode, 0 0 0 0 0 1 BDC=0 COM32-1, BDS=1 SEG1-100 "Top View" (Ext Instr Set)
wim	33:900a94bc7585	573	wait_ms(5); // Wait to ensure completion or SSD1803 fails to set Top/Bottom after reset..
wim	33:900a94bc7585	574
wim	33:900a94bc7585	575	_writeCommand(0x08 \| _lines); // Set ext function 0 0 0 0 1 FW BW NW 1,2,3 or 4 lines (Ext Instr Set)
wim	32:59c4b8f648d4	576
wim	32:59c4b8f648d4	577	_writeCommand(0x10); // Double Height and Bias, 0 0 0 1 UD2=0, UD1=0, BS1=0 Bias 1/5, DH=0 (Ext Instr Set)
wim	32:59c4b8f648d4	578
wim	32:59c4b8f648d4	579	// _writeCommand(0x76); // Set TC Control, 0 1 1 1 0 1 1 0 (Ext Instr Set)
wim	32:59c4b8f648d4	580	// _writeData(0x02); // Set TC data, 0 0 0 0 0 TC2,TC1,TC0 = 0 1 0 (Ext Instr Set)
wim	32:59c4b8f648d4	581
wim	32:59c4b8f648d4	582	_writeCommand(0x20 \| _function \| 0x01); // Set function, 0 0 1 DL N DH RE(0) IS=1 Select Instruction Set 1
wim	32:59c4b8f648d4	583	// Select Std Instr set, Select IS=1
wim	32:59c4b8f648d4	584
wim	32:59c4b8f648d4	585	_contrast = LCD_SSD1_CONTRAST;
wim	32:59c4b8f648d4	586	_writeCommand(0x70 \| (_contrast & 0x0F)); // Set Contrast 0 1 1 1 C3, C2, C1, C0 (Instr Set 1)
wim	32:59c4b8f648d4	587
wim	32:59c4b8f648d4	588	_icon_power = 0x04; // Icon off, Booster on (Instr Set 1)
wim	32:59c4b8f648d4	589	// Saved to allow contrast change at later time
wim	32:59c4b8f648d4	590	_writeCommand(0x50 \| _icon_power \| ((_contrast >> 4) & 0x03)); // Set Power, Icon and Contrast, 0 1 0 1 Ion Bon C5 C4 (Instr Set 1)
wim	32:59c4b8f648d4	591	wait_ms(10); // Wait 10ms to ensure powered up
wim	32:59c4b8f648d4	592
wim	32:59c4b8f648d4	593	_writeCommand(0x68 \| (LCD_SSD1_RAB & 0x07)); // Set Voltagefollower 0 1 1 0 Don = 1, Ampl ratio Rab2, Rab1, Rab0 = 1 1 0 (Instr Set 1)
wim	32:59c4b8f648d4	594	wait_ms(10); // Wait 10ms to ensure powered up
wim	32:59c4b8f648d4	595
wim	33:900a94bc7585	596	_writeCommand(0x20 \| _function_1); // Set function, 0 0 1 DL N BE RE(1) REV
wim	32:59c4b8f648d4	597	// Select Extended Instruction Set 1
wim	32:59c4b8f648d4	598	_writeCommand(0x10); // Shift/Scroll enable, 0 0 0 1 DS4/HS4 DS3/HS3 DS2/HS2 DS1/HS1 (Ext Instr Set 1)
wim	32:59c4b8f648d4	599
wim	32:59c4b8f648d4	600
wim	32:59c4b8f648d4	601	_writeCommand(0x20 \| _function); // Set function, 0 0 1 DL N DH RE(0) IS=0 Select Instruction Set 0
wim	32:59c4b8f648d4	602	// Select Std Instr set, Select IS=0
wim	32:59c4b8f648d4	603
wim	32:59c4b8f648d4	604	break; // case SSD1803 Controller
wim	32:59c4b8f648d4	605
wim	29:a3663151aa65	606
wim	32:59c4b8f648d4	607	// Note1: The PCF21XX family of controllers has several types that dont have an onboard voltage generator for V-LCD.
wim	32:59c4b8f648d4	608	// You must supply this LCD voltage externally and not try to enable VGen.
wim	32:59c4b8f648d4	609	// Note2: The early versions of PCF2116 controllers (eg PCF2116C) can not generate sufficiently negative voltage for the LCD at a VDD of 3V3.
wim	32:59c4b8f648d4	610	// You must supply this voltage externally and not enable VGen or you must use a higher VDD (e.g. 5V) and enable VGen.
wim	32:59c4b8f648d4	611	// More recent versions of the controller (eg PCF2116K) have an improved VGen that will work with 3V3.
wim	32:59c4b8f648d4	612	// Note3: See datasheet, PCF2116 and other types provide a V0 pin to control the LCD contrast voltage that is provided by VGen. This pins allows
wim	32:59c4b8f648d4	613	// contrast control similar to that of pin 3 on the standard 14pin LCD module connector.
wim	32:59c4b8f648d4	614	// You can disable VGen by connecting Vo to VDD. VLCD will then be used directly as LCD voltage.
wim	32:59c4b8f648d4	615	// Note4: PCF2113 and PCF2119 are different wrt to VLCD generator! There is no V0 pin. The contrast voltage is software controlled by setting the VA and VB registers.
wim	32:59c4b8f648d4	616	// Vgen is automatically switched off when the contrast voltage VA or VB is set to 0x00. Note that certain limits apply to allowed values for VA and VB.
wim	32:59c4b8f648d4	617	// Note5: See datasheet, members of the PCF21XX family support different numbers of rows/columns. Not all can support 3 or 4 rows.
wim	32:59c4b8f648d4	618	// Note6: See datasheet, the PCF21XX-C and PCF21XX-K use a non-standard character set. This may result is strange looking text when not corrected..
wim	32:59c4b8f648d4	619
wim	30:033048611c01	620	case PCF2113_3V3:
wim	32:59c4b8f648d4	621	// PCF2113 controller: Initialise Voltage booster for VLCD. VDD=3V3. VA and VB control contrast.
wim	29:a3663151aa65	622	// Initialise Display configuration
wim	29:a3663151aa65	623	switch (_type) {
wim	29:a3663151aa65	624	// case LCD12x1:
wim	33:900a94bc7585	625	// _function = 0x02; // FUNCTION SET 0 0 1 DL=0 4 bit, 0, M=0 1-line/12 chars display mode, SL=1, IS=0
wim	32:59c4b8f648d4	626	// Note: 4 bit mode is ignored for I2C mode
wim	29:a3663151aa65	627	case LCD24x1:
wim	33:900a94bc7585	628	_function = 0x00; // FUNCTION SET 0 0 1 DL=0 4 bit, 0, M=0 1-line/24 chars display mode, SL=0, IS=0
wim	32:59c4b8f648d4	629	// Note: 4 bit mode is ignored for I2C mode
wim	30:033048611c01	630	break;
wim	30:033048611c01	631
wim	30:033048611c01	632	//Tested OK for PCF2113
wim	30:033048611c01	633	case LCD12x2:
wim	33:900a94bc7585	634	_function = 0x04; // FUNCTION SET 0 0 1 DL=0 4 bit, 0, M=1 2-line/12 chars display mode, SL=0, IS=0
wim	30:033048611c01	635	break;
wim	30:033048611c01	636
wim	30:033048611c01	637	default:
wim	30:033048611c01	638	error("Error: LCD Controller type does not support this Display type\n\r");
wim	30:033048611c01	639	break;
wim	30:033048611c01	640
wim	30:033048611c01	641	} // switch type
wim	30:033048611c01	642
wim	32:59c4b8f648d4	643	// Init special features
wim	33:900a94bc7585	644	_writeCommand(0x20 \| _function \| 0x01); // Set function, Select Instr Set = 1
wim	33:900a94bc7585	645
wim	33:900a94bc7585	646	_writeCommand(0x04); // Display Conf Set 0000 0, 1, P=0, Q=0 (Instr. Set 1)
wim	33:900a94bc7585	647	_writeCommand(0x10); // Temp Compensation Set 0001 0, 0, TC1=0, TC2=0 (Instr. Set 1)
wim	33:900a94bc7585	648	// _writeCommand(0x42); // HV GEN 0100 S1=1, S2=0 (2x multiplier) (Instr. Set 1)
wim	33:900a94bc7585	649	_writeCommand(0x40 \| (LCD_PCF2_S12 & 0x03)); // HV Gen 0100 S1=1, S2=0 (2x multiplier) (Instr. Set 1)
wim	32:59c4b8f648d4	650
wim	32:59c4b8f648d4	651	_contrast = LCD_PCF2_CONTRAST;
wim	33:900a94bc7585	652	_writeCommand(0x80 \| 0x00 \| (_contrast & 0x3F)); // VLCD_set (Instr. Set 1) 1, V=0, VA=contrast
wim	33:900a94bc7585	653	_writeCommand(0x80 \| 0x40 \| (_contrast & 0x3F)); // VLCD_set (Instr. Set 1) 1, V=1, VB=contrast
wim	32:59c4b8f648d4	654	wait_ms(10); // Wait 10ms to ensure powered up
wim	32:59c4b8f648d4	655
wim	33:900a94bc7585	656	_writeCommand(0x02); // Screen Config 0000 001, L=0 (Instr. Set 1)
wim	33:900a94bc7585	657	_writeCommand(0x08); // ICON Conf 0000 1, IM=0 (Char mode), IB=0 (no icon blink) DM=0 (no direct mode) (Instr. Set 1)
wim	33:900a94bc7585	658
wim	33:900a94bc7585	659	_writeCommand(0x20 \| _function); // Set function, Select Instr Set = 0
wim	32:59c4b8f648d4	660
wim	30:033048611c01	661	break; // case PCF2113_3V3 Controller
wim	30:033048611c01	662
wim	30:033048611c01	663
wim	32:59c4b8f648d4	664	// case PCF2113_5V:
wim	32:59c4b8f648d4	665	// PCF2113 controller: No Voltage generator for VLCD. VDD=5V. Contrast voltage controlled by VA or VB.
wim	32:59c4b8f648d4	666	//@TODO
wim	32:59c4b8f648d4	667
wim	30:033048611c01	668
wim	30:033048611c01	669	case PCF2116_3V3:
wim	32:59c4b8f648d4	670	// PCF2116 controller: Voltage generator for VLCD. VDD=5V. V0 controls contrast voltage.
wim	30:033048611c01	671	// Initialise Display configuration
wim	30:033048611c01	672	switch (_type) {
wim	30:033048611c01	673	// case LCD12x1:
wim	30:033048611c01	674	// case LCD12x2:
wim	30:033048611c01	675	case LCD24x1:
wim	32:59c4b8f648d4	676	_writeCommand(0x22); //FUNCTION SET 4 bit, N/M=0 1-line/24 chars display mode, G=1 Vgen on
wim	29:a3663151aa65	677	//Note: 4 bit mode is ignored for I2C mode
wim	29:a3663151aa65	678	wait_ms(10); // Wait 10ms to ensure powered up
wim	29:a3663151aa65	679	break;
wim	29:a3663151aa65	680
wim	32:59c4b8f648d4	681	case LCD12x3D: // Special mode for KS0078 and PCF21XX
wim	32:59c4b8f648d4	682	case LCD12x3D1: // Special mode for PCF21XX
wim	32:59c4b8f648d4	683	case LCD12x4D: // Special mode for PCF21XX:
wim	30:033048611c01	684	_writeCommand(0x2E); //FUNCTION SET 4 bit, N=1/M=1 4-line/12 chars display mode, G=1 VGen on
wim	29:a3663151aa65	685	//Note: 4 bit mode is ignored for I2C mode
wim	29:a3663151aa65	686	wait_ms(10); // Wait 10ms to ensure powered up
wim	29:a3663151aa65	687	break;
wim	30:033048611c01	688
wim	30:033048611c01	689	case LCD24x2:
wim	30:033048611c01	690	_writeCommand(0x2A); //FUNCTION SET 4 bit, N=1/M=0 2-line/24 chars display mode, G=1 VGen on
wim	29:a3663151aa65	691	//Note: 4 bit mode is ignored for I2C mode
wim	30:033048611c01	692	wait_ms(10); // Wait 10ms to ensure powered up
wim	32:59c4b8f648d4	693	break;
wim	32:59c4b8f648d4	694
wim	30:033048611c01	695	default:
wim	30:033048611c01	696	error("Error: LCD Controller type does not support this Display type\n\r");
wim	30:033048611c01	697	break;
wim	30:033048611c01	698
wim	29:a3663151aa65	699	} // switch type
wim	29:a3663151aa65	700
wim	30:033048611c01	701	break; // case PCF2116_3V3 Controller
wim	29:a3663151aa65	702
wim	32:59c4b8f648d4	703
wim	32:59c4b8f648d4	704	//Experimental for cellphone 3-line display, SA=0x74, No Ack supported, Character set C or K, DL = 8 bit, N=0,M=1 (reserved mode !!), external VLCD -2V5
wim	32:59c4b8f648d4	705	//@TODO
wim	32:59c4b8f648d4	706	case PCF2116_5V:
wim	32:59c4b8f648d4	707	// PCF2116 controller: No Voltage generator for VLCD. VDD=5V. V0 controls contrast voltage.
wim	32:59c4b8f648d4	708	// Initialise Display configuration
wim	32:59c4b8f648d4	709	switch (_type) {
wim	32:59c4b8f648d4	710	// case LCD12x1:
wim	32:59c4b8f648d4	711	// case LCD12x2:
wim	32:59c4b8f648d4	712	// case LCD24x1:
wim	32:59c4b8f648d4	713	// _writeCommand(0x20); //FUNCTION SET 4 bit, N/M=0 1-line/24 chars display mode
wim	32:59c4b8f648d4	714	//Note: 4 bit mode is ignored for I2C mode
wim	32:59c4b8f648d4	715	// wait_ms(10); // Wait 10ms to ensure powered up
wim	32:59c4b8f648d4	716	// break;
wim	32:59c4b8f648d4	717
wim	32:59c4b8f648d4	718	case LCD12x3D: // Special mode for KS0078 and PCF21XX
wim	32:59c4b8f648d4	719	case LCD12x3D1: // Special mode for PCF21XX
wim	32:59c4b8f648d4	720	case LCD12x4D: // Special mode for PCF21XX:
wim	32:59c4b8f648d4	721	// _writeCommand(0x34); //FUNCTION SET 8 bit, N=0/M=1 4-line/12 chars display mode OK
wim	32:59c4b8f648d4	722	// _writeCommand(0x24); //FUNCTION SET 4 bit, N=0/M=1 4-line/12 chars display mode OK
wim	32:59c4b8f648d4	723	_writeCommand(0x2C); //FUNCTION SET 4 bit, N=1/M=1 4-line/12 chars display mode OK
wim	32:59c4b8f648d4	724	//Note: 4 bit mode is ignored for I2C mode
wim	32:59c4b8f648d4	725	wait_ms(10); // Wait 10ms to ensure powered up
wim	32:59c4b8f648d4	726	break;
wim	32:59c4b8f648d4	727
wim	32:59c4b8f648d4	728	// case LCD24x2:
wim	32:59c4b8f648d4	729	// _writeCommand(0x28); //FUNCTION SET 4 bit, N=1/M=0 2-line/24 chars display mode
wim	32:59c4b8f648d4	730	//Note: 4 bit mode is ignored for I2C mode
wim	32:59c4b8f648d4	731	// wait_ms(10); // Wait 10ms to ensure powered up
wim	32:59c4b8f648d4	732	// break;
wim	32:59c4b8f648d4	733
wim	32:59c4b8f648d4	734	default:
wim	32:59c4b8f648d4	735	error("Error: LCD Controller type does not support this Display type\n\r");
wim	32:59c4b8f648d4	736	break;
wim	32:59c4b8f648d4	737
wim	32:59c4b8f648d4	738	} // switch type
wim	32:59c4b8f648d4	739
wim	32:59c4b8f648d4	740	break; // case PCF2116_5V Controller
wim	32:59c4b8f648d4	741
wim	32:59c4b8f648d4	742	case PCF2119_3V3:
wim	32:59c4b8f648d4	743	// PCF2119 controller: Initialise Voltage booster for VLCD. VDD=3V3. VA and VB control contrast.
wim	32:59c4b8f648d4	744	// Note1: See datasheet, the PCF2119 supports icons and provides separate constrast control for Icons and characters.
wim	32:59c4b8f648d4	745	// Note2: Vgen is switched off when the contrast voltage VA or VB is set to 0x00.
wim	32:59c4b8f648d4	746
wim	32:59c4b8f648d4	747	//POR or Hardware Reset should be applied
wim	32:59c4b8f648d4	748	wait_ms(10); // Wait 10ms to ensure powered up
wim	32:59c4b8f648d4	749
wim	32:59c4b8f648d4	750	// Initialise Display configuration
wim	32:59c4b8f648d4	751	switch (_type) {
wim	32:59c4b8f648d4	752	case LCD8x1:
wim	32:59c4b8f648d4	753	// case LCD12x1:
wim	32:59c4b8f648d4	754	case LCD16x1:
wim	32:59c4b8f648d4	755	_function = 0x02; // FUNCTION SET DL=0 4 bit, 0 , M=0 1-line/16 chars display mode, SL=1
wim	32:59c4b8f648d4	756	// Note: 4 bit mode is ignored for I2C mode
wim	32:59c4b8f648d4	757	break;
wim	32:59c4b8f648d4	758
wim	32:59c4b8f648d4	759	case LCD24x1:
wim	32:59c4b8f648d4	760	// case LCD32x1:
wim	32:59c4b8f648d4	761	_function = 0x00; // FUNCTION SET DL=0 4 bit, 0 , M=0 1-line/32 chars display mode, SL=0
wim	32:59c4b8f648d4	762	// Note: 4 bit mode is ignored for I2C mode
wim	32:59c4b8f648d4	763	break;
wim	32:59c4b8f648d4	764
wim	32:59c4b8f648d4	765	case LCD8x2:
wim	32:59c4b8f648d4	766	// case LCD12x2:
wim	32:59c4b8f648d4	767	case LCD16x2:
wim	32:59c4b8f648d4	768	_function = 0x04; // FUNCTION SET DL=0 4 bit, 0, M=1 2-line/16 chars display mode, SL=0
wim	32:59c4b8f648d4	769	// Note: 4 bit mode is ignored for I2C mode
wim	32:59c4b8f648d4	770	break;
wim	32:59c4b8f648d4	771
wim	32:59c4b8f648d4	772	default:
wim	32:59c4b8f648d4	773	error("Error: LCD Controller type does not support this Display type\n\r");
wim	32:59c4b8f648d4	774	break;
wim	32:59c4b8f648d4	775
wim	32:59c4b8f648d4	776	} // switch type
wim	32:59c4b8f648d4	777
wim	32:59c4b8f648d4	778	// Init special features
wim	32:59c4b8f648d4	779	_writeCommand(0x20 \| _function \| 0x01); // Set function, Select Instruction Set = 1
wim	32:59c4b8f648d4	780
wim	32:59c4b8f648d4	781	_writeCommand(0x04); // DISP CONF SET (Instr. Set 1) 0000, 0, 1, P=0, Q=0
wim	32:59c4b8f648d4	782	_writeCommand(0x10); // TEMP CTRL SET (Instr. Set 1) 0001, 0, 0, TC1=0, TC2=0
wim	32:59c4b8f648d4	783	// _writeCommand(0x42); // HV GEN (Instr. Set 1) 0100, 0, 0, S1=1, S2=0 (2x multiplier)
wim	32:59c4b8f648d4	784	_writeCommand(0x40 \| (LCD_PCF2_S12 & 0x03)); // HV GEN (Instr. Set 1) 0100, 0, 0, S1=1, S2=0 (2x multiplier)
wim	32:59c4b8f648d4	785
wim	32:59c4b8f648d4	786	_contrast = LCD_PCF2_CONTRAST;
wim	32:59c4b8f648d4	787	_writeCommand(0x80 \| 0x00 \| (_contrast & 0x3F)); // VLCD_set (Instr. Set 1) V=0, VA=contrast
wim	32:59c4b8f648d4	788	_writeCommand(0x80 \| 0x40 \| (_contrast & 0x3F)); // VLCD_set (Instr. Set 1) V=1, VB=contrast
wim	32:59c4b8f648d4	789	wait_ms(10); // Wait 10ms to ensure powered up
wim	32:59c4b8f648d4	790
wim	32:59c4b8f648d4	791	_writeCommand(0x02); // SCRN CONF (Instr. Set 1) L=0
wim	32:59c4b8f648d4	792	_writeCommand(0x08); // ICON CONF (Instr. Set 1) IM=0 (Char mode) IB=0 (no icon blink) DM=0 (no direct mode)
wim	32:59c4b8f648d4	793
wim	32:59c4b8f648d4	794	_writeCommand(0x20 \| _function); // Select Instruction Set = 0
wim	32:59c4b8f648d4	795
wim	32:59c4b8f648d4	796	break; // case PCF2119_3V3 Controller
wim	32:59c4b8f648d4	797
wim	32:59c4b8f648d4	798	// case PCF2119_5V:
wim	32:59c4b8f648d4	799	// PCF2119 controller: No Voltage booster for VLCD. VDD=3V3. VA and VB control contrast.
wim	32:59c4b8f648d4	800	// Note1: See datasheet, the PCF2119 supports icons and provides separate constrast control for Icons and characters.
wim	32:59c4b8f648d4	801	// Note2: Vgen is switched off when the contrast voltage VA or VB is set to 0x00.
wim	30:033048611c01	802	//@TODO
wim	29:a3663151aa65	803
wim	19:c747b9e2e7b8	804	case WS0010:
wim	19:c747b9e2e7b8	805	// WS0010 OLED controller: Initialise DC/DC Voltage converter for LEDs
wim	30:033048611c01	806	// Note1: Identical to RS0010
wim	30:033048611c01	807	// Note2: supports 1 or 2 lines (and 16x100 graphics)
wim	30:033048611c01	808	// supports 4 fonts (English/Japanese (default), Western European-I, English/Russian, Western European-II)
wim	19:c747b9e2e7b8	809	// Cursor/Disp shift set 0001 SC RL 0 0
wim	19:c747b9e2e7b8	810	//
wim	30:033048611c01	811	// Mode and Power set 0001 GC PWR 1 1
wim	19:c747b9e2e7b8	812	// GC = 0 (Graph Mode=1, Char Mode=0)
wim	30:033048611c01	813	// PWR = 1 (DC/DC On/Off)
wim	30:033048611c01	814
wim	30:033048611c01	815	//@Todo: This may be needed to enable a warm reboot
wim	32:59c4b8f648d4	816	//_writeCommand(0x13); // Char mode, DC/DC off
wim	30:033048611c01	817	//wait_ms(10); // Wait 10ms to ensure powered down
wim	32:59c4b8f648d4	818	_writeCommand(0x17); // Char mode, DC/DC on
wim	30:033048611c01	819	wait_ms(10); // Wait 10ms to ensure powered up
wim	29:a3663151aa65	820
wim	29:a3663151aa65	821	// Initialise Display configuration
wim	29:a3663151aa65	822	switch (_type) {
wim	29:a3663151aa65	823	case LCD8x1: //8x1 is a regular 1 line display
wim	29:a3663151aa65	824	case LCD8x2B: //8x2B is a special case of 16x1
wim	29:a3663151aa65	825	// case LCD12x1:
wim	29:a3663151aa65	826	case LCD16x1:
wim	30:033048611c01	827	case LCD24x1:
wim	30:033048611c01	828	_writeCommand(0x20); // Function set 001 DL N F FT1 FT0
wim	30:033048611c01	829	// DL=0 (4 bits bus)
wim	30:033048611c01	830	// N=0 (1 line)
wim	30:033048611c01	831	// F=0 (5x7 dots font)
wim	30:033048611c01	832	// FT=00 (00 = Engl/Jap, 01 = WestEur1, 10 = Engl/Russian, 11 = WestEur2
wim	30:033048611c01	833	break;
wim	30:033048611c01	834
wim	32:59c4b8f648d4	835	case LCD12x3D: // Special mode for KS0078 and PCF21XX
wim	32:59c4b8f648d4	836	case LCD12x3D1: // Special mode for PCF21XX
wim	32:59c4b8f648d4	837	case LCD12x4D: // Special mode for PCF21XX:
wim	33:900a94bc7585	838	case LCD16x3G: // Special mode for ST7036
wim	30:033048611c01	839	case LCD24x4D: // Special mode for KS0078
wim	30:033048611c01	840	error("Error: LCD Controller type does not support this Display type\n\r");
wim	29:a3663151aa65	841	break;
wim	29:a3663151aa65	842
wim	29:a3663151aa65	843	default:
wim	30:033048611c01	844	// All other LCD types are initialised as 2 Line displays (including LCD16x1C and LCD40x4)
wim	30:033048611c01	845	_writeCommand(0x28); // Function set 001 DL N F FT1 FT0
wim	30:033048611c01	846	// DL=0 (4 bits bus)
wim	30:033048611c01	847	// N=1 (2 lines)
wim	30:033048611c01	848	// F=0 (5x7 dots font)
wim	30:033048611c01	849	// FT=00 (00 = Engl/Jap, 01 = WestEur1, 10 = Engl/Russian, 11 = WestEur2
wim	30:033048611c01	850
wim	29:a3663151aa65	851	break;
wim	29:a3663151aa65	852	} // switch type
wim	29:a3663151aa65	853
wim	32:59c4b8f648d4	854	break; // case WS0010 Controller
wim	33:900a94bc7585	855
wim	33:900a94bc7585	856
wim	33:900a94bc7585	857	case US2066_3V3:
wim	33:900a94bc7585	858	// US2066/SSD1311 OLED controller, Initialise for VDD=3V3
wim	33:900a94bc7585	859	// Note: supports 1,2, 3 or 4 lines
wim	33:900a94bc7585	860	// case USS2066_5V:
wim	33:900a94bc7585	861	// US2066 controller, VDD=5V
wim	33:900a94bc7585	862
wim	33:900a94bc7585	863	// Initialise Display configuration
wim	33:900a94bc7585	864	switch (_type) {
wim	33:900a94bc7585	865	case LCD8x1: //8x1 is a regular 1 line display
wim	33:900a94bc7585	866	case LCD8x2B: //8x2D is a special case of 16x1
wim	33:900a94bc7585	867	// case LCD12x1:
wim	33:900a94bc7585	868	case LCD16x1:
wim	33:900a94bc7585	869	// case LCD20x1:
wim	33:900a94bc7585	870	_function = 0x00; // Set function 0 0 1 X N DH RE(0) IS
wim	33:900a94bc7585	871	// Saved to allow switch between Instruction sets at later time
wim	33:900a94bc7585	872	// DL=X bit is ignored for US2066. Uses hardwired pins instead
wim	33:900a94bc7585	873	// N=0 1 Line / 3 Line
wim	33:900a94bc7585	874	// DH=0 Double Height disable
wim	33:900a94bc7585	875	// IS=0
wim	33:900a94bc7585	876
wim	33:900a94bc7585	877	_function_1 = 0x02; // Set function, 0 0 1 X N BE RE(1) REV
wim	33:900a94bc7585	878	// Saved to allow switch between Instruction sets at later time
wim	33:900a94bc7585	879	// DL=X bit is ignored for US2066. Uses hardwired pins instead
wim	33:900a94bc7585	880	// N=0 1 Line / 3 Line
wim	33:900a94bc7585	881	// BE=0 Blink Enable off, special feature of SSD1803, US2066
wim	33:900a94bc7585	882	// REV=0 Reverse off, special feature of SSD1803, US2066
wim	33:900a94bc7585	883
wim	33:900a94bc7585	884	_lines = 0x00; // Ext function set 0 0 0 0 1 FW BW NW
wim	33:900a94bc7585	885	// NW=0 1-Line LCD (N=0)
wim	33:900a94bc7585	886	break;
wim	33:900a94bc7585	887
wim	33:900a94bc7585	888	case LCD16x1C:
wim	33:900a94bc7585	889	case LCD8x2:
wim	33:900a94bc7585	890	case LCD16x2:
wim	33:900a94bc7585	891	case LCD20x2:
wim	33:900a94bc7585	892	_function = 0x08; // Set function 0 0 1 X N DH RE(0) IS
wim	33:900a94bc7585	893	// Saved to allow switch between Instruction sets at later time
wim	33:900a94bc7585	894	// DL=X bit is ignored for US2066. Uses hardwired pins instead
wim	33:900a94bc7585	895	// N=1 2 line / 4 Line
wim	33:900a94bc7585	896	// DH=0 Double Height disable
wim	33:900a94bc7585	897	// IS=0
wim	33:900a94bc7585	898
wim	33:900a94bc7585	899	_function_1 = 0x0A; // Set function, 0 0 1 X N BE RE(1) REV
wim	33:900a94bc7585	900	// Saved to allow switch between Instruction sets at later time
wim	33:900a94bc7585	901	// DL=X bit is ignored for US2066. Uses hardwired pins instead
wim	33:900a94bc7585	902	// N=1 2 line / 4 Line
wim	33:900a94bc7585	903	// BE=0 Blink Enable off, special feature of SSD1803, US2066
wim	33:900a94bc7585	904	// REV=0 Reverse off, special feature of SSD1803, US2066
wim	33:900a94bc7585	905
wim	33:900a94bc7585	906	_lines = 0x00; // Ext function set 0 0 0 0 1 FW BW NW
wim	33:900a94bc7585	907	// NW=0 2-Line LCD (N=1)
wim	33:900a94bc7585	908	break;
wim	33:900a94bc7585	909
wim	33:900a94bc7585	910	case LCD12x3D: // Special mode for KS0078 and PCF21XX
wim	33:900a94bc7585	911	// case LCD12x3D1: // Special mode for KS0078 and PCF21XX
wim	33:900a94bc7585	912	case LCD16x3D: // Special mode for KS0078, SSD1803 and US2066
wim	33:900a94bc7585	913	// case LCD16x3D1: // Special mode for SSD1803, US2066
wim	33:900a94bc7585	914	// case LCD20x3D: // Special mode for SSD1803, US2066
wim	33:900a94bc7585	915	_function = 0x00; // Set function 0 0 1 X N DH RE(0) IS
wim	33:900a94bc7585	916	// Saved to allow switch between Instruction sets at later time
wim	33:900a94bc7585	917	// DL=X bit is ignored for US2066. Uses hardwired pins instead
wim	33:900a94bc7585	918	// N=0 1 Line / 3 Line
wim	33:900a94bc7585	919	// DH=0 Double Height disable
wim	33:900a94bc7585	920	// IS=0
wim	33:900a94bc7585	921
wim	33:900a94bc7585	922	_function_1 = 0x02; // Set function, 0 0 1 X N BE RE(1) REV
wim	33:900a94bc7585	923	// Saved to allow switch between Instruction sets at later time
wim	33:900a94bc7585	924	// DL=X bit is ignored for US2066. Uses hardwired pins instead
wim	33:900a94bc7585	925	// N=0 1 Line / 3 Line
wim	33:900a94bc7585	926	// BE=0 Blink Enable off, special feature of SSD1803, US2066
wim	33:900a94bc7585	927	// REV=0 Reverse off, special feature of SSD1803, US2066
wim	33:900a94bc7585	928
wim	33:900a94bc7585	929	_lines = 0x00; // Ext function set 0 0 0 0 1 FW BW NW
wim	33:900a94bc7585	930	// NW=1 3-Line LCD (N=0)
wim	33:900a94bc7585	931	break;
wim	33:900a94bc7585	932
wim	33:900a94bc7585	933	case LCD20x4D: // Special mode for SSD1803, US2066
wim	33:900a94bc7585	934	_function = 0x08; // Set function 0 0 1 X N DH RE(0) IS
wim	33:900a94bc7585	935	// Saved to allow switch between Instruction sets at later time
wim	33:900a94bc7585	936	// DL=X bit is ignored for US2066. Uses hardwired pins instead
wim	33:900a94bc7585	937	// N=1 2 line / 4 Line
wim	33:900a94bc7585	938	// DH=0 Double Height disable
wim	33:900a94bc7585	939	// IS=0
wim	33:900a94bc7585	940
wim	33:900a94bc7585	941	_function_1 = 0x0A; // Set function, 0 0 1 DL N BE RE(1) REV
wim	33:900a94bc7585	942	// Saved to allow switch between Instruction sets at later time
wim	33:900a94bc7585	943	// DL=0 bit is ignored for US2066. Uses hardwired pins instead
wim	33:900a94bc7585	944	// N=1 2 line / 4 Line
wim	33:900a94bc7585	945	// BE=0 Blink Enable off, special feature of SSD1803, US2066
wim	33:900a94bc7585	946	// REV=0 Reverse off, special feature of SSD1803, US2066
wim	33:900a94bc7585	947
wim	33:900a94bc7585	948	_lines = 0x01; // Ext function set 0 0 0 0 1 FW BW NW
wim	33:900a94bc7585	949	// NW=1 4-Line LCD (N=1)
wim	33:900a94bc7585	950	break;
wim	33:900a94bc7585	951
wim	33:900a94bc7585	952	// case LCD24x1:
wim	33:900a94bc7585	953	// case LCD16x3G: // Special mode for ST7036
wim	33:900a94bc7585	954	// case LCD24x4D: // Special mode for KS0078
wim	33:900a94bc7585	955	default:
wim	33:900a94bc7585	956	error("Error: LCD Controller type does not support this Display type\n\r");
wim	33:900a94bc7585	957	break;
wim	33:900a94bc7585	958
wim	33:900a94bc7585	959	} // switch type
wim	33:900a94bc7585	960
wim	33:900a94bc7585	961
wim	33:900a94bc7585	962	// init special features
wim	33:900a94bc7585	963	_writeCommand(0x20 \| _function_1); // Set function, 0 0 1 X N BE RE(1) REV
wim	33:900a94bc7585	964	// Select Extended Instruction Set
wim	33:900a94bc7585	965
wim	33:900a94bc7585	966	_writeCommand(0x71); // Function Select A: 0 1 1 1 0 0 0 1 (Ext Instr Set)
wim	33:900a94bc7585	967	_writeData(0x00); // Disable Internal VDD
wim	33:900a94bc7585	968
wim	33:900a94bc7585	969	_writeCommand(0x79); // Function Select OLED: 0 1 1 1 1 0 0 1 (Ext Instr Set)
wim	33:900a94bc7585	970
wim	33:900a94bc7585	971	_writeCommand(0xD5); // Display Clock Divide Ratio: 1 1 0 1 0 1 0 1 (Ext Instr Set, OLED Instr Set)
wim	33:900a94bc7585	972	_writeCommand(0x70); // Display Clock Divide Ratio value: 0 1 1 1 0 0 0 0 (Ext Instr Set, OLED Instr Set)
wim	33:900a94bc7585	973
wim	33:900a94bc7585	974	_writeCommand(0x78); // Function Disable OLED: 0 1 1 1 1 0 0 0 (Ext Instr Set)
wim	33:900a94bc7585	975
wim	33:900a94bc7585	976	// _writeCommand(0x06); // Set ext entry mode, 0 0 0 0 0 1 BDC=1 COM1-32, BDS=0 SEG100-1 "Bottom View" (Ext Instr Set)
wim	33:900a94bc7585	977	_writeCommand(0x05); // Set ext entry mode, 0 0 0 0 0 1 BDC=0 COM32-1, BDS=1 SEG1-100 "Top View" (Ext Instr Set)
wim	33:900a94bc7585	978
wim	33:900a94bc7585	979	_writeCommand(0x08 \| _lines); // Set ext function 0 0 0 0 1 FW BW NW 1,2,3 or 4 lines (Ext Instr Set)
wim	33:900a94bc7585	980
wim	33:900a94bc7585	981	// _writeCommand(0x1C); // Double Height and Bias, 0 0 0 1 UD2=1, UD1=1, X, DH=0 (Ext Instr Set)
wim	33:900a94bc7585	982	// // Default
wim	33:900a94bc7585	983
wim	33:900a94bc7585	984	_writeCommand(0x72); // Function Select B: 0 1 1 1 0 0 1 0 (Ext Instr Set)
wim	33:900a94bc7585	985	_writeData(0x01); // Select ROM A (CGRAM 8, CGROM 248)
wim	33:900a94bc7585	986
wim	33:900a94bc7585	987	_writeCommand(0x79); // Function Select OLED: 0 1 1 1 1 0 0 1 (Ext Instr Set)
wim	33:900a94bc7585	988
wim	33:900a94bc7585	989	_writeCommand(0xDA); // Set Segm Pins Config: 1 1 0 1 1 0 1 0 (Ext Instr Set, OLED)
wim	33:900a94bc7585	990	_writeCommand(0x10); // Set Segm Pins Config value: Altern Odd/Even, Disable Remap (Ext Instr Set, OLED)
wim	33:900a94bc7585	991
wim	33:900a94bc7585	992	_writeCommand(0xDC); // Function Select C: 1 1 0 1 1 1 0 0 (Ext Instr Set, OLED)
wim	33:900a94bc7585	993	// _writeCommand(0x00); // Set internal VSL, GPIO pin HiZ (always read low)
wim	33:900a94bc7585	994	_writeCommand(0x80); // Set external VSL, GPIO pin HiZ (always read low)
wim	33:900a94bc7585	995
wim	33:900a94bc7585	996	_contrast = LCD_US20_CONTRAST;
wim	33:900a94bc7585	997	_writeCommand(0x81); // Set Contrast Control: 1 0 0 0 0 0 0 1 (Ext Instr Set, OLED)
wim	33:900a94bc7585	998	_writeCommand((_contrast << 2) \| 0x03); // Set Contrast Value: 8 bits, use 6 bits for compatibility
wim	33:900a94bc7585	999
wim	33:900a94bc7585	1000	_writeCommand(0xD9); // Set Phase Length: 1 1 0 1 1 0 0 1 (Ext Instr Set, OLED)
wim	33:900a94bc7585	1001	_writeCommand(0xF1); // Set Phase Length Value:
wim	33:900a94bc7585	1002
wim	33:900a94bc7585	1003	_writeCommand(0xDB); // Set VCOMH Deselect Lvl: 1 1 0 1 1 0 1 1 (Ext Instr Set, OLED)
wim	33:900a94bc7585	1004	_writeCommand(0x30); // Set VCOMH Deselect Value: 0.83 x VCC
wim	33:900a94bc7585	1005
wim	33:900a94bc7585	1006	wait_ms(10); // Wait 10ms to ensure powered up
wim	33:900a94bc7585	1007
wim	33:900a94bc7585	1008	//Test Fade/Blinking. Hard Blink on/off, No fade in/out ??
wim	33:900a94bc7585	1009	// _writeCommand(0x23); // Set (Ext Instr Set, OLED)
wim	33:900a94bc7585	1010	// _writeCommand(0x3F); // Set interval 128 frames
wim	33:900a94bc7585	1011	//End Test Blinking
wim	33:900a94bc7585	1012
wim	33:900a94bc7585	1013	_writeCommand(0x78); // Function Disable OLED: 0 1 1 1 1 0 0 0 (Ext Instr Set)
wim	33:900a94bc7585	1014
wim	33:900a94bc7585	1015	_writeCommand(0x20 \| _function \| 0x01); // Set function, 0 0 1 X N DH RE(0) IS=1 Select Instruction Set 1
wim	33:900a94bc7585	1016	// Select Std Instr set, Select IS=1
wim	33:900a94bc7585	1017
wim	33:900a94bc7585	1018	_writeCommand(0x20 \| _function_1); // Set function, 0 0 1 X N BE RE(1) REV
wim	33:900a94bc7585	1019	// Select Ext Instr Set, IS=1
wim	33:900a94bc7585	1020	_writeCommand(0x10); // Shift/Scroll enable, 0 0 0 1 DS4/HS4 DS3/HS3 DS2/HS2 DS1/HS1 (Ext Instr Set, IS=1)
wim	33:900a94bc7585	1021
wim	33:900a94bc7585	1022
wim	33:900a94bc7585	1023	_writeCommand(0x20 \| _function); // Set function, 0 0 1 DL N DH RE(0) IS=0 Select Instruction Set 0
wim	33:900a94bc7585	1024	// Select Std Instr set, Select IS=0
wim	33:900a94bc7585	1025
wim	33:900a94bc7585	1026	break; // case US2066/SSD1311 Controller
wim	33:900a94bc7585	1027
wim	29:a3663151aa65	1028
wim	19:c747b9e2e7b8	1029	default:
wim	32:59c4b8f648d4	1030	// Devices fully compatible to HD44780 that do not use any DC/DC Voltage converters but external VLCD, no icons etc
wim	10:dd9b3a696acd	1031
wim	29:a3663151aa65	1032	// Initialise Display configuration
wim	29:a3663151aa65	1033	switch (_type) {
wim	29:a3663151aa65	1034	case LCD8x1: //8x1 is a regular 1 line display
wim	29:a3663151aa65	1035	case LCD8x2B: //8x2B is a special case of 16x1
wim	29:a3663151aa65	1036	// case LCD12x1:
wim	29:a3663151aa65	1037	case LCD16x1:
wim	30:033048611c01	1038	// case LCD20x1:
wim	29:a3663151aa65	1039	case LCD24x1:
wim	30:033048611c01	1040	// case LCD40x1:
wim	32:59c4b8f648d4	1041	_function = 0x00; // Function set 001 DL N F - -
wim	29:a3663151aa65	1042	// DL=0 (4 bits bus)
wim	29:a3663151aa65	1043	// N=0 (1 line)
wim	29:a3663151aa65	1044	// F=0 (5x7 dots font)
wim	32:59c4b8f648d4	1045	_writeCommand(0x20 \| _function);
wim	29:a3663151aa65	1046	break;
wim	29:a3663151aa65	1047
wim	32:59c4b8f648d4	1048	case LCD12x3D: // Special mode for KS0078 and PCF21XX
wim	32:59c4b8f648d4	1049	case LCD12x3D1: // Special mode for KS0078 and PCF21XX
wim	32:59c4b8f648d4	1050	case LCD12x4D: // Special mode for KS0078 and PCF21XX:
wim	33:900a94bc7585	1051	case LCD16x3D: // Special mode for KS0078
wim	32:59c4b8f648d4	1052	// case LCD16x3D1: // Special mode for KS0078
wim	30:033048611c01	1053	// case LCD24x3D: // Special mode for KS0078
wim	32:59c4b8f648d4	1054	// case LCD24x3D1: // Special mode for KS0078
wim	30:033048611c01	1055	case LCD24x4D: // Special mode for KS0078
wim	30:033048611c01	1056	error("Error: LCD Controller type does not support this Display type\n\r");
wim	30:033048611c01	1057	break;
wim	30:033048611c01	1058
wim	30:033048611c01	1059	// All other LCD types are initialised as 2 Line displays (including LCD16x1C and LCD40x4)
wim	29:a3663151aa65	1060	default:
wim	32:59c4b8f648d4	1061	_function = 0x08; // Function set 001 DL N F - -
wim	29:a3663151aa65	1062	// DL=0 (4 bits bus)
wim	29:a3663151aa65	1063	// Note: 4 bit mode is ignored for native SPI and I2C devices
wim	29:a3663151aa65	1064	// N=1 (2 lines)
wim	29:a3663151aa65	1065	// F=0 (5x7 dots font, only option for 2 line display)
wim	32:59c4b8f648d4	1066	// - (Don't care)
wim	32:59c4b8f648d4	1067	_writeCommand(0x20 \| _function);
wim	29:a3663151aa65	1068	break;
wim	29:a3663151aa65	1069	} // switch type
wim	10:dd9b3a696acd	1070
wim	29:a3663151aa65	1071	break; // case default Controller
wim	29:a3663151aa65	1072
wim	29:a3663151aa65	1073	} // switch Controller specific initialisations
wim	29:a3663151aa65	1074
wim	10:dd9b3a696acd	1075
wim	30:033048611c01	1076	// Controller general initialisations
wim	32:59c4b8f648d4	1077	// _writeCommand(0x01); // cls, and set cursor to 0
wim	32:59c4b8f648d4	1078	// wait_ms(10); // The CLS command takes 1.64 ms.
wim	32:59c4b8f648d4	1079	// // Since we are not using the Busy flag, Lets be safe and take 10 ms
wim	28:30fa94f7341c	1080
wim	28:30fa94f7341c	1081	_writeCommand(0x02); // Return Home
wim	28:30fa94f7341c	1082	// Cursor Home, DDRAM Address to Origin
wim	28:30fa94f7341c	1083
wim	28:30fa94f7341c	1084	_writeCommand(0x06); // Entry Mode 0000 0 1 I/D S
wim	13:24506ba22480	1085	// Cursor Direction and Display Shift
wim	28:30fa94f7341c	1086	// I/D=1 (Cur incr)
wim	28:30fa94f7341c	1087	// S=0 (No display shift)
wim	10:dd9b3a696acd	1088
wim	29:a3663151aa65	1089	_writeCommand(0x14); // Cursor or Display shift 0001 S/C R/L x x
wim	29:a3663151aa65	1090	// S/C=0 Cursor moves
wim	29:a3663151aa65	1091	// R/L=1 Right
wim	29:a3663151aa65	1092	//
wim	29:a3663151aa65	1093
wim	13:24506ba22480	1094	// _writeCommand(0x0C); // Display Ctrl 0000 1 D C B
wim	17:652ab113bc2e	1095	// // Display On, Cursor Off, Blink Off
wim	21:9eb628d9e164	1096	setCursor(CurOff_BlkOff);
wim	21:9eb628d9e164	1097	setMode(DispOn);
simon	1:ac48b187213c	1098	}
simon	1:ac48b187213c	1099
wim	8:03116f75b66e	1100
wim	21:9eb628d9e164	1101	/** Clear the screen, Cursor home.
wim	21:9eb628d9e164	1102	*/
wim	21:9eb628d9e164	1103	void TextLCD_Base::cls() {
wim	15:b70ebfffb258	1104
wim	15:b70ebfffb258	1105	// Select and configure second LCD controller when needed
wim	15:b70ebfffb258	1106	if(_type==LCD40x4) {
wim	21:9eb628d9e164	1107	_ctrl_idx=_LCDCtrl_1; // Select 2nd controller
wim	15:b70ebfffb258	1108
wim	15:b70ebfffb258	1109	// Second LCD controller Cursor always Off
wim	21:9eb628d9e164	1110	_setCursorAndDisplayMode(_currentMode, CurOff_BlkOff);
wim	15:b70ebfffb258	1111
wim	15:b70ebfffb258	1112	// Second LCD controller Clearscreen
wim	27:22d5086f6ba6	1113	_writeCommand(0x01); // cls, and set cursor to 0
wim	29:a3663151aa65	1114	wait_ms(10); // The CLS command takes 1.64 ms.
wim	29:a3663151aa65	1115	// Since we are not using the Busy flag, Lets be safe and take 10 ms
wim	15:b70ebfffb258	1116
wim	21:9eb628d9e164	1117	_ctrl_idx=_LCDCtrl_0; // Select primary controller
wim	15:b70ebfffb258	1118	}
wim	15:b70ebfffb258	1119
wim	15:b70ebfffb258	1120	// Primary LCD controller Clearscreen
wim	27:22d5086f6ba6	1121	_writeCommand(0x01); // cls, and set cursor to 0
wim	29:a3663151aa65	1122	wait_ms(10); // The CLS command takes 1.64 ms.
wim	29:a3663151aa65	1123	// Since we are not using the Busy flag, Lets be safe and take 10 ms
wim	15:b70ebfffb258	1124
wim	15:b70ebfffb258	1125	// Restore cursormode on primary LCD controller when needed
wim	15:b70ebfffb258	1126	if(_type==LCD40x4) {
wim	17:652ab113bc2e	1127	_setCursorAndDisplayMode(_currentMode,_currentCursor);
wim	15:b70ebfffb258	1128	}
wim	15:b70ebfffb258	1129
wim	29:a3663151aa65	1130	setAddress(0, 0); // Reset Cursor location
wim	32:59c4b8f648d4	1131	// Note: This is needed because some displays (eg PCF21XX) don't use line 0 in the '3 Line' mode.
simon	1:ac48b187213c	1132	}
simon	1:ac48b187213c	1133
wim	29:a3663151aa65	1134	/** Locate cursor to a screen column and row
wim	29:a3663151aa65	1135	*
wim	29:a3663151aa65	1136	* @param column The horizontal position from the left, indexed from 0
wim	29:a3663151aa65	1137	* @param row The vertical position from the top, indexed from 0
wim	29:a3663151aa65	1138	*/
wim	21:9eb628d9e164	1139	void TextLCD_Base::locate(int column, int row) {
wim	15:b70ebfffb258	1140
wim	15:b70ebfffb258	1141	// setAddress() does all the heavy lifting:
wim	15:b70ebfffb258	1142	// check column and row sanity,
wim	15:b70ebfffb258	1143	// switch controllers for LCD40x4 if needed
wim	15:b70ebfffb258	1144	// switch cursor for LCD40x4 if needed
wim	15:b70ebfffb258	1145	// set the new memory address to show cursor at correct location
wim	32:59c4b8f648d4	1146	setAddress(column, row);
wim	15:b70ebfffb258	1147	}
wim	30:033048611c01	1148
wim	15:b70ebfffb258	1149
wim	21:9eb628d9e164	1150	/** Write a single character (Stream implementation)
wim	21:9eb628d9e164	1151	*/
wim	21:9eb628d9e164	1152	int TextLCD_Base::_putc(int value) {
wim	15:b70ebfffb258	1153	int addr;
wim	15:b70ebfffb258	1154
wim	15:b70ebfffb258	1155	if (value == '\n') {
wim	15:b70ebfffb258	1156	//No character to write
wim	15:b70ebfffb258	1157
wim	15:b70ebfffb258	1158	//Update Cursor
wim	15:b70ebfffb258	1159	_column = 0;
wim	15:b70ebfffb258	1160	_row++;
wim	15:b70ebfffb258	1161	if (_row >= rows()) {
wim	15:b70ebfffb258	1162	_row = 0;
wim	15:b70ebfffb258	1163	}
wim	15:b70ebfffb258	1164	}
wim	15:b70ebfffb258	1165	else {
wim	15:b70ebfffb258	1166	//Character to write
wim	15:b70ebfffb258	1167	_writeData(value);
wim	15:b70ebfffb258	1168
wim	15:b70ebfffb258	1169	//Update Cursor
wim	15:b70ebfffb258	1170	_column++;
wim	15:b70ebfffb258	1171	if (_column >= columns()) {
wim	15:b70ebfffb258	1172	_column = 0;
wim	15:b70ebfffb258	1173	_row++;
wim	15:b70ebfffb258	1174	if (_row >= rows()) {
wim	15:b70ebfffb258	1175	_row = 0;
wim	15:b70ebfffb258	1176	}
wim	15:b70ebfffb258	1177	}
wim	15:b70ebfffb258	1178	} //else
wim	15:b70ebfffb258	1179
wim	15:b70ebfffb258	1180	//Set next memoryaddress, make sure cursor blinks at next location
wim	15:b70ebfffb258	1181	addr = getAddress(_column, _row);
wim	15:b70ebfffb258	1182	_writeCommand(0x80 \| addr);
wim	15:b70ebfffb258	1183
wim	15:b70ebfffb258	1184	return value;
wim	15:b70ebfffb258	1185	}
wim	15:b70ebfffb258	1186
wim	15:b70ebfffb258	1187
wim	16:c276b75e6585	1188	// get a single character (Stream implementation)
wim	21:9eb628d9e164	1189	int TextLCD_Base::_getc() {
simon	1:ac48b187213c	1190	return -1;
simon	1:ac48b187213c	1191	}
simon	1:ac48b187213c	1192
wim	14:0c32b66b14b8	1193
wim	17:652ab113bc2e	1194	// Write a nibble using the 4-bit interface
wim	21:9eb628d9e164	1195	void TextLCD_Base::_writeNibble(int value) {
wim	17:652ab113bc2e	1196
wim	17:652ab113bc2e	1197	// Enable is Low
wim	21:9eb628d9e164	1198	this->_setEnable(true);
wim	21:9eb628d9e164	1199	this->_setData(value & 0x0F); // Low nibble
wim	17:652ab113bc2e	1200	wait_us(1); // Data setup time
wim	21:9eb628d9e164	1201	this->_setEnable(false);
wim	17:652ab113bc2e	1202	wait_us(1); // Datahold time
wim	17:652ab113bc2e	1203
wim	17:652ab113bc2e	1204	// Enable is Low
wim	17:652ab113bc2e	1205	}
wim	17:652ab113bc2e	1206
wim	16:c276b75e6585	1207	// Write a byte using the 4-bit interface
wim	21:9eb628d9e164	1208	void TextLCD_Base::_writeByte(int value) {
wim	15:b70ebfffb258	1209
wim	15:b70ebfffb258	1210	// Enable is Low
wim	21:9eb628d9e164	1211	this->_setEnable(true);
wim	21:9eb628d9e164	1212	this->_setData(value >> 4); // High nibble
wim	15:b70ebfffb258	1213	wait_us(1); // Data setup time
wim	21:9eb628d9e164	1214	this->_setEnable(false);
wim	15:b70ebfffb258	1215	wait_us(1); // Data hold time
wim	15:b70ebfffb258	1216
wim	21:9eb628d9e164	1217	this->_setEnable(true);
wim	21:9eb628d9e164	1218	this->_setData(value >> 0); // Low nibble
wim	15:b70ebfffb258	1219	wait_us(1); // Data setup time
wim	21:9eb628d9e164	1220	this->_setEnable(false);
wim	15:b70ebfffb258	1221	wait_us(1); // Datahold time
wim	15:b70ebfffb258	1222
wim	15:b70ebfffb258	1223	// Enable is Low
simon	1:ac48b187213c	1224	}
simon	1:ac48b187213c	1225
wim	21:9eb628d9e164	1226	// Write a command byte to the LCD controller
wim	21:9eb628d9e164	1227	void TextLCD_Base::_writeCommand(int command) {
wim	15:b70ebfffb258	1228
wim	21:9eb628d9e164	1229	this->_setRS(false);
wim	16:c276b75e6585	1230	wait_us(1); // Data setup time for RS
wim	15:b70ebfffb258	1231
wim	21:9eb628d9e164	1232	this->_writeByte(command);
wim	15:b70ebfffb258	1233	wait_us(40); // most instructions take 40us
simon	1:ac48b187213c	1234	}
simon	1:ac48b187213c	1235
wim	21:9eb628d9e164	1236	// Write a data byte to the LCD controller
wim	21:9eb628d9e164	1237	void TextLCD_Base::_writeData(int data) {
wim	15:b70ebfffb258	1238
wim	21:9eb628d9e164	1239	this->_setRS(true);
wim	16:c276b75e6585	1240	wait_us(1); // Data setup time for RS
wim	15:b70ebfffb258	1241
wim	21:9eb628d9e164	1242	this->_writeByte(data);
wim	15:b70ebfffb258	1243	wait_us(40); // data writes take 40us
simon	1:ac48b187213c	1244	}
simon	1:ac48b187213c	1245
wim	8:03116f75b66e	1246
wim	32:59c4b8f648d4	1247	// This replaces the original _address() method.
wim	8:03116f75b66e	1248	// It is confusing since it returns the memoryaddress or-ed with the set memorycommand 0x80.
wim	8:03116f75b66e	1249	// Left it in here for compatibility with older code. New applications should use getAddress() instead.
wim	21:9eb628d9e164	1250	int TextLCD_Base::_address(int column, int row) {
wim	8:03116f75b66e	1251	return 0x80 \| getAddress(column, row);
wim	8:03116f75b66e	1252	}
wim	8:03116f75b66e	1253
wim	30:033048611c01	1254
wim	30:033048611c01	1255	// This is new method to return the memory address based on row, column and displaytype.
wim	30:033048611c01	1256	//
wim	30:033048611c01	1257	/** Return the memoryaddress of screen column and row location
wim	30:033048611c01	1258	*
wim	30:033048611c01	1259	* @param column The horizontal position from the left, indexed from 0
wim	30:033048611c01	1260	* @param row The vertical position from the top, indexed from 0
wim	30:033048611c01	1261	* @param return The memoryaddress of screen column and row location
wim	30:033048611c01	1262	*
wim	30:033048611c01	1263	*/
wim	30:033048611c01	1264	int TextLCD_Base::getAddress(int column, int row) {
wim	30:033048611c01	1265
wim	30:033048611c01	1266	switch (_addr_mode) {
wim	30:033048611c01	1267
wim	30:033048611c01	1268	case LCD_T_A:
wim	30:033048611c01	1269	//Default addressing mode for 1, 2 and 4 rows (except 40x4)
wim	30:033048611c01	1270	//The two available rows are split and stacked on top of eachother. Addressing for 3rd and 4th line continues where lines 1 and 2 were split.
wim	30:033048611c01	1271	//Displays top rows when less than four are used.
wim	30:033048611c01	1272	switch (row) {
wim	30:033048611c01	1273	case 0:
wim	30:033048611c01	1274	return 0x00 + column;
wim	30:033048611c01	1275	case 1:
wim	30:033048611c01	1276	return 0x40 + column;
wim	30:033048611c01	1277	case 2:
wim	30:033048611c01	1278	return 0x00 + _nr_cols + column;
wim	30:033048611c01	1279	case 3:
wim	30:033048611c01	1280	return 0x40 + _nr_cols + column;
wim	30:033048611c01	1281	// Should never get here.
wim	30:033048611c01	1282	default:
wim	30:033048611c01	1283	return 0x00;
wim	30:033048611c01	1284	}
wim	30:033048611c01	1285
wim	30:033048611c01	1286	case LCD_T_B:
wim	30:033048611c01	1287	// LCD8x2B is a special layout of LCD16x1
wim	30:033048611c01	1288	if (row==0)
wim	30:033048611c01	1289	return 0x00 + column;
wim	30:033048611c01	1290	else
wim	30:033048611c01	1291	// return _nr_cols + column;
wim	30:033048611c01	1292	return 0x08 + column;
wim	30:033048611c01	1293
wim	30:033048611c01	1294	case LCD_T_C:
wim	30:033048611c01	1295	// LCD16x1C is a special layout of LCD8x2
wim	33:900a94bc7585	1296	// LCD32x1C is a special layout of LCD16x2
wim	33:900a94bc7585	1297	// LCD40x1C is a special layout of LCD20x2
wim	33:900a94bc7585	1298	#if(0)
wim	32:59c4b8f648d4	1299	if (column < 8)
wim	30:033048611c01	1300	return 0x00 + column;
wim	30:033048611c01	1301	else
wim	30:033048611c01	1302	return 0x40 + (column - 8);
wim	32:59c4b8f648d4	1303	#else
wim	32:59c4b8f648d4	1304	if (column < (_nr_cols >> 1))
wim	32:59c4b8f648d4	1305	return 0x00 + column;
wim	32:59c4b8f648d4	1306	else
wim	32:59c4b8f648d4	1307	return 0x40 + (column - (_nr_cols >> 1));
wim	32:59c4b8f648d4	1308	#endif
wim	30:033048611c01	1309
wim	30:033048611c01	1310	// Not sure about this one, seems wrong.
wim	30:033048611c01	1311	// Left in for compatibility with original library
wim	30:033048611c01	1312	// case LCD16x2B:
wim	30:033048611c01	1313	// return 0x00 + (row * 40) + column;
wim	30:033048611c01	1314
wim	30:033048611c01	1315	case LCD_T_D:
wim	33:900a94bc7585	1316	//Alternate addressing mode for 3 and 4 row displays (except 40x4). Used by PCF21XX, KS0078, SSD1803
wim	30:033048611c01	1317	//The 4 available rows start at a hardcoded address.
wim	30:033048611c01	1318	//Displays top rows when less than four are used.
wim	30:033048611c01	1319	switch (row) {
wim	30:033048611c01	1320	case 0:
wim	30:033048611c01	1321	return 0x00 + column;
wim	30:033048611c01	1322	case 1:
wim	30:033048611c01	1323	return 0x20 + column;
wim	30:033048611c01	1324	case 2:
wim	30:033048611c01	1325	return 0x40 + column;
wim	30:033048611c01	1326	case 3:
wim	30:033048611c01	1327	return 0x60 + column;
wim	30:033048611c01	1328	// Should never get here.
wim	30:033048611c01	1329	default:
wim	30:033048611c01	1330	return 0x00;
wim	30:033048611c01	1331	}
wim	30:033048611c01	1332
wim	30:033048611c01	1333	case LCD_T_D1:
wim	32:59c4b8f648d4	1334	//Alternate addressing mode for 3 row displays. Used by PCF21XX, KS0078, SSD1803
wim	30:033048611c01	1335	//The 4 available rows start at a hardcoded address.
wim	30:033048611c01	1336	//Skips top row of 4 row display and starts display at row 1
wim	30:033048611c01	1337	switch (row) {
wim	30:033048611c01	1338	case 0:
wim	30:033048611c01	1339	return 0x20 + column;
wim	30:033048611c01	1340	case 1:
wim	30:033048611c01	1341	return 0x40 + column;
wim	30:033048611c01	1342	case 2:
wim	30:033048611c01	1343	return 0x60 + column;
wim	30:033048611c01	1344	// Should never get here.
wim	30:033048611c01	1345	default:
wim	30:033048611c01	1346	return 0x00;
wim	30:033048611c01	1347	}
wim	30:033048611c01	1348
wim	30:033048611c01	1349	case LCD_T_E:
wim	30:033048611c01	1350	// LCD40x4 is a special case since it has 2 controllers.
wim	30:033048611c01	1351	// Each controller is configured as 40x2 (Type A)
wim	30:033048611c01	1352	if (row<2) {
wim	30:033048611c01	1353	// Test to see if we need to switch between controllers
wim	30:033048611c01	1354	if (_ctrl_idx != _LCDCtrl_0) {
wim	30:033048611c01	1355
wim	30:033048611c01	1356	// Second LCD controller Cursor Off
wim	30:033048611c01	1357	_setCursorAndDisplayMode(_currentMode, CurOff_BlkOff);
wim	30:033048611c01	1358
wim	30:033048611c01	1359	// Select primary controller
wim	30:033048611c01	1360	_ctrl_idx = _LCDCtrl_0;
wim	30:033048611c01	1361
wim	30:033048611c01	1362	// Restore cursormode on primary LCD controller
wim	30:033048611c01	1363	_setCursorAndDisplayMode(_currentMode, _currentCursor);
wim	30:033048611c01	1364	}
wim	30:033048611c01	1365
wim	30:033048611c01	1366	return 0x00 + (row * 0x40) + column;
wim	30:033048611c01	1367	}
wim	30:033048611c01	1368	else {
wim	30:033048611c01	1369
wim	30:033048611c01	1370	// Test to see if we need to switch between controllers
wim	30:033048611c01	1371	if (_ctrl_idx != _LCDCtrl_1) {
wim	30:033048611c01	1372	// Primary LCD controller Cursor Off
wim	30:033048611c01	1373	_setCursorAndDisplayMode(_currentMode, CurOff_BlkOff);
wim	30:033048611c01	1374
wim	30:033048611c01	1375	// Select secondary controller
wim	30:033048611c01	1376	_ctrl_idx = _LCDCtrl_1;
wim	30:033048611c01	1377
wim	30:033048611c01	1378	// Restore cursormode on secondary LCD controller
wim	30:033048611c01	1379	_setCursorAndDisplayMode(_currentMode, _currentCursor);
wim	30:033048611c01	1380	}
wim	30:033048611c01	1381
wim	30:033048611c01	1382	return 0x00 + ((row-2) * 0x40) + column;
wim	30:033048611c01	1383	}
wim	30:033048611c01	1384
wim	32:59c4b8f648d4	1385	case LCD_T_F:
wim	32:59c4b8f648d4	1386	//Alternate addressing mode for 3 row displays.
wim	32:59c4b8f648d4	1387	//The first half of 3rd row continues from 1st row, the second half continues from 2nd row.
wim	32:59c4b8f648d4	1388	switch (row) {
wim	32:59c4b8f648d4	1389	case 0:
wim	32:59c4b8f648d4	1390	return 0x00 + column;
wim	32:59c4b8f648d4	1391	case 1:
wim	32:59c4b8f648d4	1392	return 0x40 + column;
wim	32:59c4b8f648d4	1393	case 2:
wim	32:59c4b8f648d4	1394	if (column < (_nr_cols >> 1)) // check first or second half of line
wim	32:59c4b8f648d4	1395	return (0x00 + _nr_cols + column);
wim	32:59c4b8f648d4	1396	else
wim	32:59c4b8f648d4	1397	return (0x40 + _nr_cols + (column - (_nr_cols >> 1)));
wim	32:59c4b8f648d4	1398	// Should never get here.
wim	32:59c4b8f648d4	1399	default:
wim	32:59c4b8f648d4	1400	return 0x00;
wim	32:59c4b8f648d4	1401	}
wim	32:59c4b8f648d4	1402
wim	32:59c4b8f648d4	1403	case LCD_T_G:
wim	32:59c4b8f648d4	1404	//Alternate addressing mode for 3 row displays. Used by ST7036
wim	32:59c4b8f648d4	1405	switch (row) {
wim	32:59c4b8f648d4	1406	case 0:
wim	32:59c4b8f648d4	1407	return 0x00 + column;
wim	32:59c4b8f648d4	1408	case 1:
wim	32:59c4b8f648d4	1409	return 0x10 + column;
wim	32:59c4b8f648d4	1410	case 2:
wim	32:59c4b8f648d4	1411	return 0x20 + column;
wim	32:59c4b8f648d4	1412	// Should never get here.
wim	32:59c4b8f648d4	1413	default:
wim	32:59c4b8f648d4	1414	return 0x00;
wim	32:59c4b8f648d4	1415	}
wim	32:59c4b8f648d4	1416
wim	30:033048611c01	1417	// Should never get here.
wim	30:033048611c01	1418	default:
wim	30:033048611c01	1419	return 0x00;
wim	32:59c4b8f648d4	1420
wim	32:59c4b8f648d4	1421	} // switch _addr_mode
wim	30:033048611c01	1422	}
wim	30:033048611c01	1423
wim	30:033048611c01	1424
wim	29:a3663151aa65	1425	/** Set the memoryaddress of screen column and row location
wim	29:a3663151aa65	1426	*
wim	29:a3663151aa65	1427	* @param column The horizontal position from the left, indexed from 0
wim	29:a3663151aa65	1428	* @param row The vertical position from the top, indexed from 0
wim	29:a3663151aa65	1429	*/
wim	21:9eb628d9e164	1430	void TextLCD_Base::setAddress(int column, int row) {
wim	15:b70ebfffb258	1431
wim	15:b70ebfffb258	1432	// Sanity Check column
wim	15:b70ebfffb258	1433	if (column < 0) {
wim	15:b70ebfffb258	1434	_column = 0;
wim	15:b70ebfffb258	1435	}
wim	15:b70ebfffb258	1436	else if (column >= columns()) {
wim	15:b70ebfffb258	1437	_column = columns() - 1;
wim	15:b70ebfffb258	1438	} else _column = column;
wim	8:03116f75b66e	1439
wim	15:b70ebfffb258	1440	// Sanity Check row
wim	15:b70ebfffb258	1441	if (row < 0) {
wim	15:b70ebfffb258	1442	_row = 0;
wim	15:b70ebfffb258	1443	}
wim	15:b70ebfffb258	1444	else if (row >= rows()) {
wim	15:b70ebfffb258	1445	_row = rows() - 1;
wim	15:b70ebfffb258	1446	} else _row = row;
wim	15:b70ebfffb258	1447
wim	15:b70ebfffb258	1448
wim	15:b70ebfffb258	1449	// Compute the memory address
wim	15:b70ebfffb258	1450	// For LCD40x4: switch controllers if needed
wim	15:b70ebfffb258	1451	// switch cursor if needed
wim	15:b70ebfffb258	1452	int addr = getAddress(_column, _row);
wim	8:03116f75b66e	1453
wim	13:24506ba22480	1454	_writeCommand(0x80 \| addr);
wim	8:03116f75b66e	1455	}
simon	1:ac48b187213c	1456
wim	29:a3663151aa65	1457
wim	29:a3663151aa65	1458	/** Return the number of columns
wim	29:a3663151aa65	1459	*
wim	29:a3663151aa65	1460	* @param return The number of columns
wim	30:033048611c01	1461	*
wim	30:033048611c01	1462	* Note: some configurations are commented out because they have not yet been tested due to lack of hardware
wim	29:a3663151aa65	1463	*/
wim	21:9eb628d9e164	1464	int TextLCD_Base::columns() {
wim	30:033048611c01	1465
wim	30:033048611c01	1466	// Columns encoded in b7..b0
wim	30:033048611c01	1467	//return (_type & 0xFF);
wim	31:ef31cd8a00d1	1468	return _nr_cols;
simon	1:ac48b187213c	1469	}
simon	1:ac48b187213c	1470
wim	29:a3663151aa65	1471	/** Return the number of rows
wim	29:a3663151aa65	1472	*
wim	29:a3663151aa65	1473	* @param return The number of rows
wim	30:033048611c01	1474	*
wim	30:033048611c01	1475	* Note: some configurations are commented out because they have not yet been tested due to lack of hardware
wim	29:a3663151aa65	1476	*/
wim	21:9eb628d9e164	1477	int TextLCD_Base::rows() {
wim	30:033048611c01	1478
wim	30:033048611c01	1479	// Rows encoded in b15..b8
wim	30:033048611c01	1480	//return ((_type >> 8) & 0xFF);
wim	30:033048611c01	1481	return _nr_rows;
simon	1:ac48b187213c	1482	}
wim	10:dd9b3a696acd	1483
wim	29:a3663151aa65	1484	/** Set the Cursormode
wim	29:a3663151aa65	1485	*
wim	29:a3663151aa65	1486	* @param cursorMode The Cursor mode (CurOff_BlkOff, CurOn_BlkOff, CurOff_BlkOn, CurOn_BlkOn)
wim	29:a3663151aa65	1487	*/
wim	21:9eb628d9e164	1488	void TextLCD_Base::setCursor(LCDCursor cursorMode) {
wim	15:b70ebfffb258	1489
wim	17:652ab113bc2e	1490	// Save new cursor mode, needed when 2 controllers are in use or when display is switched off/on
wim	17:652ab113bc2e	1491	_currentCursor = cursorMode;
wim	10:dd9b3a696acd	1492
wim	17:652ab113bc2e	1493	// Configure only current LCD controller
wim	31:ef31cd8a00d1	1494	_setCursorAndDisplayMode(_currentMode, _currentCursor);
wim	15:b70ebfffb258	1495	}
wim	15:b70ebfffb258	1496
wim	29:a3663151aa65	1497	/** Set the Displaymode
wim	29:a3663151aa65	1498	*
wim	29:a3663151aa65	1499	* @param displayMode The Display mode (DispOff, DispOn)
wim	29:a3663151aa65	1500	*/
wim	21:9eb628d9e164	1501	void TextLCD_Base::setMode(LCDMode displayMode) {
wim	17:652ab113bc2e	1502
wim	17:652ab113bc2e	1503	// Save new displayMode, needed when 2 controllers are in use or when cursor is changed
wim	17:652ab113bc2e	1504	_currentMode = displayMode;
wim	15:b70ebfffb258	1505
wim	17:652ab113bc2e	1506	// Select and configure second LCD controller when needed
wim	17:652ab113bc2e	1507	if(_type==LCD40x4) {
wim	21:9eb628d9e164	1508	if (_ctrl_idx==_LCDCtrl_0) {
wim	17:652ab113bc2e	1509	// Configure primary LCD controller
wim	17:652ab113bc2e	1510	_setCursorAndDisplayMode(_currentMode, _currentCursor);
wim	11:9ec02df863a1	1511
wim	17:652ab113bc2e	1512	// Select 2nd controller
wim	21:9eb628d9e164	1513	_ctrl_idx=_LCDCtrl_1;
wim	17:652ab113bc2e	1514
wim	17:652ab113bc2e	1515	// Configure secondary LCD controller
wim	21:9eb628d9e164	1516	_setCursorAndDisplayMode(_currentMode, CurOff_BlkOff);
wim	11:9ec02df863a1	1517
wim	17:652ab113bc2e	1518	// Restore current controller
wim	21:9eb628d9e164	1519	_ctrl_idx=_LCDCtrl_0;
wim	17:652ab113bc2e	1520	}
wim	17:652ab113bc2e	1521	else {
wim	17:652ab113bc2e	1522	// Select primary controller
wim	21:9eb628d9e164	1523	_ctrl_idx=_LCDCtrl_0;
wim	17:652ab113bc2e	1524
wim	17:652ab113bc2e	1525	// Configure primary LCD controller
wim	21:9eb628d9e164	1526	_setCursorAndDisplayMode(_currentMode, CurOff_BlkOff);
wim	17:652ab113bc2e	1527
wim	17:652ab113bc2e	1528	// Restore current controller
wim	21:9eb628d9e164	1529	_ctrl_idx=_LCDCtrl_1;
wim	11:9ec02df863a1	1530
wim	17:652ab113bc2e	1531	// Configure secondary LCD controller
wim	17:652ab113bc2e	1532	_setCursorAndDisplayMode(_currentMode, _currentCursor);
wim	10:dd9b3a696acd	1533	}
wim	17:652ab113bc2e	1534	}
wim	17:652ab113bc2e	1535	else {
wim	17:652ab113bc2e	1536	// Configure primary LCD controller
wim	17:652ab113bc2e	1537	_setCursorAndDisplayMode(_currentMode, _currentCursor);
wim	30:033048611c01	1538	}
wim	17:652ab113bc2e	1539	}
wim	17:652ab113bc2e	1540
wim	17:652ab113bc2e	1541
wim	29:a3663151aa65	1542	/** Low level method to restore the cursortype and display mode for current controller
wim	29:a3663151aa65	1543	*/
wim	21:9eb628d9e164	1544	void TextLCD_Base::_setCursorAndDisplayMode(LCDMode displayMode, LCDCursor cursorType) {
wim	17:652ab113bc2e	1545
wim	17:652ab113bc2e	1546	// Configure current LCD controller
wim	17:652ab113bc2e	1547	_writeCommand(0x08 \| displayMode \| cursorType);
wim	10:dd9b3a696acd	1548	}
wim	10:dd9b3a696acd	1549
wim	29:a3663151aa65	1550	/** Set the Backlight mode
wim	29:a3663151aa65	1551	*
wim	29:a3663151aa65	1552	* @param backlightMode The Backlight mode (LightOff, LightOn)
wim	29:a3663151aa65	1553	*/
wim	21:9eb628d9e164	1554	void TextLCD_Base::setBacklight(LCDBacklight backlightMode) {
wim	20:e0da005a777f	1555
wim	20:e0da005a777f	1556	if (backlightMode == LightOn) {
wim	21:9eb628d9e164	1557	this->_setBL(true);
wim	20:e0da005a777f	1558	}
wim	20:e0da005a777f	1559	else {
wim	21:9eb628d9e164	1560	this->_setBL(false);
wim	20:e0da005a777f	1561	}
wim	20:e0da005a777f	1562	}
wim	20:e0da005a777f	1563
wim	29:a3663151aa65	1564	/** Set User Defined Characters
wim	29:a3663151aa65	1565	*
wim	29:a3663151aa65	1566	* @param unsigned char c The Index of the UDC (0..7)
wim	29:a3663151aa65	1567	* @param char *udc_data The bitpatterns for the UDC (8 bytes of 5 significant bits)
wim	29:a3663151aa65	1568	*/
wim	21:9eb628d9e164	1569	void TextLCD_Base::setUDC(unsigned char c, char *udc_data) {
wim	15:b70ebfffb258	1570
wim	15:b70ebfffb258	1571	// Select and configure second LCD controller when needed
wim	15:b70ebfffb258	1572	if(_type==LCD40x4) {
wim	19:c747b9e2e7b8	1573	_LCDCtrl_Idx current_ctrl_idx = _ctrl_idx; // Temp save current controller
wim	15:b70ebfffb258	1574
wim	15:b70ebfffb258	1575	// Select primary controller
wim	21:9eb628d9e164	1576	_ctrl_idx=_LCDCtrl_0;
wim	15:b70ebfffb258	1577
wim	15:b70ebfffb258	1578	// Configure primary LCD controller
wim	15:b70ebfffb258	1579	_setUDC(c, udc_data);
wim	15:b70ebfffb258	1580
wim	15:b70ebfffb258	1581	// Select 2nd controller
wim	21:9eb628d9e164	1582	_ctrl_idx=_LCDCtrl_1;
wim	15:b70ebfffb258	1583
wim	15:b70ebfffb258	1584	// Configure secondary LCD controller
wim	15:b70ebfffb258	1585	_setUDC(c, udc_data);
wim	11:9ec02df863a1	1586
wim	15:b70ebfffb258	1587	// Restore current controller
wim	19:c747b9e2e7b8	1588	_ctrl_idx=current_ctrl_idx;
wim	15:b70ebfffb258	1589	}
wim	15:b70ebfffb258	1590	else {
wim	15:b70ebfffb258	1591	// Configure primary LCD controller
wim	15:b70ebfffb258	1592	_setUDC(c, udc_data);
wim	15:b70ebfffb258	1593	}
wim	15:b70ebfffb258	1594
wim	15:b70ebfffb258	1595	}
wim	15:b70ebfffb258	1596
wim	29:a3663151aa65	1597	/** Low level method to store user defined characters for current controller
wim	29:a3663151aa65	1598	*/
wim	21:9eb628d9e164	1599	void TextLCD_Base::_setUDC(unsigned char c, char *udc_data) {
wim	15:b70ebfffb258	1600
wim	15:b70ebfffb258	1601	// Select CG RAM for current LCD controller
wim	15:b70ebfffb258	1602	_writeCommand(0x40 + ((c & 0x07) << 3)); //Set CG-RAM address,
wim	15:b70ebfffb258	1603	//8 sequential locations needed per UDC
wim	15:b70ebfffb258	1604	// Store UDC pattern
wim	11:9ec02df863a1	1605	for (int i=0; i<8; i++) {
wim	13:24506ba22480	1606	_writeData(*udc_data++);
wim	11:9ec02df863a1	1607	}
wim	15:b70ebfffb258	1608
wim	15:b70ebfffb258	1609	//Select DD RAM again for current LCD controller
wim	15:b70ebfffb258	1610	int addr = getAddress(_column, _row);
wim	30:033048611c01	1611	_writeCommand(0x80 \| addr);
wim	11:9ec02df863a1	1612	}
wim	21:9eb628d9e164	1613
wim	32:59c4b8f648d4	1614
wim	33:900a94bc7585	1615	/** Set UDC Blink
wim	33:900a94bc7585	1616	* setUDCBlink method is supported by some compatible devices (eg SSD1803)
wim	33:900a94bc7585	1617	*
wim	33:900a94bc7585	1618	* @param blinkMode The Blink mode (BlinkOff, BlinkOn)
wim	33:900a94bc7585	1619	*/
wim	33:900a94bc7585	1620	void TextLCD_Base::setUDCBlink(LCDBlink blinkMode){
wim	33:900a94bc7585	1621	// Blinking UDCs are enabled when a specific controlbit (BE) is set.
wim	33:900a94bc7585	1622	// The blinking pixels in the UDC can be controlled by setting additional bits in the UDC bitpattern.
wim	33:900a94bc7585	1623	// UDCs are defined by an 8 byte bitpattern. The P0..P5 form the character pattern.
wim	33:900a94bc7585	1624	// P7 P6 P5 P4 P3 P2 P1 P0
wim	33:900a94bc7585	1625	// 0 B1 B0 x 0 1 1 1 0
wim	33:900a94bc7585	1626	// 1 B1 B0 x 1 0 0 0 1
wim	33:900a94bc7585	1627	// .............
wim	33:900a94bc7585	1628	// 7 B1 B0 x 1 0 0 0 1
wim	33:900a94bc7585	1629	//
wim	33:900a94bc7585	1630	// Bit 6 and Bit 7 in the pattern will control the blinking mode when Blink is enabled through BE.
wim	33:900a94bc7585	1631	// B1 B0 Mode
wim	33:900a94bc7585	1632	// 0 0 No Blinking in this row of the UDC
wim	33:900a94bc7585	1633	// 0 1 Enabled pixels in P4 will blink
wim	33:900a94bc7585	1634	// 1 x Enabled pixels in P0..P4 will blink
wim	33:900a94bc7585	1635
wim	33:900a94bc7585	1636	switch (blinkMode) {
wim	33:900a94bc7585	1637	case BlinkOn:
wim	33:900a94bc7585	1638	// Controllers that support UDC Blink
wim	33:900a94bc7585	1639	switch (_ctrl) {
wim	33:900a94bc7585	1640	case KS0078 :
wim	33:900a94bc7585	1641	_function_1 \|= 0x02; // Enable UDC Blink
wim	33:900a94bc7585	1642	_writeCommand(0x20 \| _function_1); // Function set 0 0 1 DL N RE(1) BE 0 (Ext Regs)
wim	33:900a94bc7585	1643
wim	33:900a94bc7585	1644	_writeCommand(0x20 \| _function); // Function set 0 0 1 DL N RE(0) DH REV (Std Regs)
wim	33:900a94bc7585	1645	break; // case KS0078 Controller
wim	33:900a94bc7585	1646
wim	33:900a94bc7585	1647	case US2066_3V3 :
wim	33:900a94bc7585	1648	case SSD1803_3V3 :
wim	33:900a94bc7585	1649	_function_1 \|= 0x04; // Enable UDC Blink
wim	33:900a94bc7585	1650	_writeCommand(0x20 \| _function_1); // Set function, 0 0 1 DL N BE RE(1) REV
wim	33:900a94bc7585	1651	// Select Ext Instr Set
wim	33:900a94bc7585	1652
wim	33:900a94bc7585	1653	_writeCommand(0x20 \| _function); // Set function, 0 0 1 DL N DH RE(0) IS=0 Select Instruction Set 0
wim	33:900a94bc7585	1654	// Select Std Instr set, Select IS=0
wim	33:900a94bc7585	1655	break; // case SSD1803, US2066
wim	33:900a94bc7585	1656
wim	33:900a94bc7585	1657	default:
wim	33:900a94bc7585	1658	//Unsupported feature for other controllers
wim	33:900a94bc7585	1659	break;
wim	33:900a94bc7585	1660	} //switch _ctrl
wim	33:900a94bc7585	1661
wim	33:900a94bc7585	1662	break;
wim	33:900a94bc7585	1663
wim	33:900a94bc7585	1664	case BlinkOff:
wim	33:900a94bc7585	1665	// Controllers that support UDC Blink
wim	33:900a94bc7585	1666	switch (_ctrl) {
wim	33:900a94bc7585	1667	case KS0078 :
wim	33:900a94bc7585	1668	_function_1 &= ~0x02; // Disable UDC Blink
wim	33:900a94bc7585	1669	_writeCommand(0x20 \| _function_1); // Function set 0 0 1 DL N RE(1) BE 0 (Ext Regs)
wim	33:900a94bc7585	1670
wim	33:900a94bc7585	1671	_writeCommand(0x20 \| _function); // Function set 0 0 1 DL N RE(0) DH REV (Std Regs)
wim	33:900a94bc7585	1672	break; // case KS0078 Controller
wim	33:900a94bc7585	1673
wim	33:900a94bc7585	1674	case US2066_3V3 :
wim	33:900a94bc7585	1675	case SSD1803_3V3 :
wim	33:900a94bc7585	1676	_function_1 &= ~0x04; // Disable UDC Blink
wim	33:900a94bc7585	1677	_writeCommand(0x20 \| _function_1); // Set function, 0 0 1 DL N BE RE(1) REV
wim	33:900a94bc7585	1678	// Select Ext Instr Set
wim	33:900a94bc7585	1679
wim	33:900a94bc7585	1680	_writeCommand(0x20 \| _function); // Set function, 0 0 1 DL N DH RE(0) IS=0 Select Instruction Set 0
wim	33:900a94bc7585	1681	// Select Std Instr set, Select IS=0
wim	33:900a94bc7585	1682	break; // case SSD1803, US2066
wim	33:900a94bc7585	1683
wim	33:900a94bc7585	1684	default:
wim	33:900a94bc7585	1685	//Unsupported feature for other controllers
wim	33:900a94bc7585	1686	break;
wim	33:900a94bc7585	1687	} //switch _ctrl
wim	33:900a94bc7585	1688
wim	33:900a94bc7585	1689	break;
wim	33:900a94bc7585	1690
wim	33:900a94bc7585	1691	default:
wim	33:900a94bc7585	1692	break;
wim	33:900a94bc7585	1693	} // blinkMode
wim	33:900a94bc7585	1694
wim	33:900a94bc7585	1695	} // setUDCBlink()
wim	33:900a94bc7585	1696
wim	33:900a94bc7585	1697
wim	32:59c4b8f648d4	1698	/** Set Contrast
wim	32:59c4b8f648d4	1699	* setContrast method is supported by some compatible devices (eg ST7032i) that have onboard LCD voltage generation
wim	32:59c4b8f648d4	1700	* Initial code for ST70XX imported from fork by JH1PJL
wim	32:59c4b8f648d4	1701	*
wim	32:59c4b8f648d4	1702	* @param unsigned char c contrast data (6 significant bits, valid range 0..63, Value 0 will disable the Vgen)
wim	32:59c4b8f648d4	1703	* @return none
wim	32:59c4b8f648d4	1704	*/
wim	32:59c4b8f648d4	1705	//@TODO Add support for 40x4 dual controller
wim	32:59c4b8f648d4	1706	void TextLCD_Base::setContrast(unsigned char c) {
wim	32:59c4b8f648d4	1707
wim	32:59c4b8f648d4	1708	// Function set mode stored during Init. Make sure we dont accidentally switch between 1-line and 2-line mode!
wim	32:59c4b8f648d4	1709	// Icon/Booster mode stored during Init. Make sure we dont accidentally change this!
wim	32:59c4b8f648d4	1710
wim	32:59c4b8f648d4	1711	_contrast = c & 0x3F; // Sanity check
wim	32:59c4b8f648d4	1712
wim	33:900a94bc7585	1713	switch (_ctrl) {
wim	32:59c4b8f648d4	1714	case PCF2113_3V3 :
wim	32:59c4b8f648d4	1715	case PCF2119_3V3 :
wim	32:59c4b8f648d4	1716	if (_contrast < 5) _contrast = 0; // See datasheet. Sanity check for PCF2113/PCF2119
wim	32:59c4b8f648d4	1717	if (_contrast > 55) _contrast = 55;
wim	32:59c4b8f648d4	1718
wim	32:59c4b8f648d4	1719	_writeCommand(0x20 \| _function \| 0x01); // Set function, Select Instruction Set = 1
wim	32:59c4b8f648d4	1720	_writeCommand(0x80 \| 0x00 \| (_contrast & 0x3F)); // VLCD_set (Instr. Set 1) V=0, VA=contrast
wim	32:59c4b8f648d4	1721	_writeCommand(0x80 \| 0x40 \| (_contrast & 0x3F)); // VLCD_set (Instr. Set 1) V=1, VB=contrast
wim	32:59c4b8f648d4	1722	_writeCommand(0x20 \| _function); // Select Instruction Set = 0
wim	32:59c4b8f648d4	1723	break;
wim	32:59c4b8f648d4	1724
wim	32:59c4b8f648d4	1725	case ST7032_3V3 :
wim	32:59c4b8f648d4	1726	case ST7032_5V :
wim	32:59c4b8f648d4	1727	case ST7036_3V3 :
wim	32:59c4b8f648d4	1728	// case ST7036_5V :
wim	32:59c4b8f648d4	1729	case SSD1803_3V3 :
wim	32:59c4b8f648d4	1730	_writeCommand(0x20 \| _function \| 0x01); // Select Instruction Set = 1
wim	32:59c4b8f648d4	1731	_writeCommand(0x70 \| (_contrast & 0x0F)); // Contrast Low bits
wim	32:59c4b8f648d4	1732	_writeCommand(0x50 \| _icon_power \| ((_contrast >> 4) & 0x03)); // Contrast High bits
wim	32:59c4b8f648d4	1733	_writeCommand(0x20 \| _function); // Select Instruction Set = 0
wim	32:59c4b8f648d4	1734	break;
wim	32:59c4b8f648d4	1735
wim	33:900a94bc7585	1736	case US2066_3V3 :
wim	33:900a94bc7585	1737	_writeCommand(0x20 \| _function_1); // Set function, 0 0 1 DL N BE RE(1) REV
wim	33:900a94bc7585	1738	// Select Extended Instruction Set
wim	33:900a94bc7585	1739
wim	33:900a94bc7585	1740	_writeCommand(0x79); // Function Select OLED: 0 1 1 1 1 0 0 1 (Ext Instr Set)
wim	33:900a94bc7585	1741
wim	33:900a94bc7585	1742	_writeCommand(0x81); // Set Contrast Control: 1 0 0 0 0 0 0 1 (Ext Instr Set, OLED)
wim	33:900a94bc7585	1743	_writeCommand((_contrast << 2) \| 0x03); // Set Contrast Value: 8 bits. Use 6 bits for compatibility
wim	33:900a94bc7585	1744
wim	33:900a94bc7585	1745	_writeCommand(0x78); // Function Disable OLED: 0 1 1 1 1 0 0 0 (Ext Instr Set)
wim	33:900a94bc7585	1746
wim	33:900a94bc7585	1747	_writeCommand(0x20 \| _function); // Set function, 0 0 1 DL N DH RE(0) IS=0 Select Instruction Set 0
wim	33:900a94bc7585	1748	// Select Std Instr set, Select IS=0
wim	33:900a94bc7585	1749	break;
wim	33:900a94bc7585	1750
wim	32:59c4b8f648d4	1751	#if(0)
wim	32:59c4b8f648d4	1752	//not yet tested
wim	32:59c4b8f648d4	1753	case PT6314 :
wim	32:59c4b8f648d4	1754	// Only 2 significant bits
wim	32:59c4b8f648d4	1755	// 0x00 = 100%
wim	32:59c4b8f648d4	1756	// 0x01 = 75%
wim	32:59c4b8f648d4	1757	// 0x02 = 50%
wim	32:59c4b8f648d4	1758	// 0x03 = 25%
wim	32:59c4b8f648d4	1759	_writeCommand(0x20 \| _function \| ((~_contrast) >> 4)); // Invert and shift to use 2 MSBs
wim	32:59c4b8f648d4	1760	break;
wim	32:59c4b8f648d4	1761	#endif
wim	32:59c4b8f648d4	1762
wim	32:59c4b8f648d4	1763	default:
wim	32:59c4b8f648d4	1764	//Unsupported feature for other controllers
wim	33:900a94bc7585	1765	break;
wim	33:900a94bc7585	1766	} // end switch
wim	33:900a94bc7585	1767	} // end setContrast()
wim	32:59c4b8f648d4	1768
wim	32:59c4b8f648d4	1769
wim	32:59c4b8f648d4	1770	/** Set Power
wim	32:59c4b8f648d4	1771	* setPower method is supported by some compatible devices (eg SSD1803) that have power down modes
wim	32:59c4b8f648d4	1772	*
wim	32:59c4b8f648d4	1773	* @param bool powerOn Power on/off
wim	32:59c4b8f648d4	1774	* @return none
wim	32:59c4b8f648d4	1775	*/
wim	32:59c4b8f648d4	1776	//@TODO Add support for 40x4 dual controller
wim	32:59c4b8f648d4	1777	void TextLCD_Base::setPower(bool powerOn) {
wim	32:59c4b8f648d4	1778
wim	32:59c4b8f648d4	1779	if (powerOn) {
wim	32:59c4b8f648d4	1780	// Switch on
wim	32:59c4b8f648d4	1781	setMode(DispOn);
wim	32:59c4b8f648d4	1782
wim	32:59c4b8f648d4	1783	// Controllers that supports specific Power Down mode
wim	32:59c4b8f648d4	1784	switch (_ctrl) {
wim	32:59c4b8f648d4	1785
wim	32:59c4b8f648d4	1786	// case PCF2113_3V3 :
wim	32:59c4b8f648d4	1787	// case PCF2119_3V3 :
wim	32:59c4b8f648d4	1788	// case ST7032_3V3 :
wim	32:59c4b8f648d4	1789	//@todo
wim	33:900a94bc7585	1790	// enable Booster Bon
wim	33:900a94bc7585	1791
wim	33:900a94bc7585	1792	case WS0010:
wim	33:900a94bc7585	1793	_writeCommand(0x17); // Char mode, DC/DC on
wim	33:900a94bc7585	1794	wait_ms(10); // Wait 10ms to ensure powered up
wim	33:900a94bc7585	1795	break;
wim	33:900a94bc7585	1796
wim	33:900a94bc7585	1797	case KS0078:
wim	32:59c4b8f648d4	1798	case SSD1803_3V3 :
wim	32:59c4b8f648d4	1799	// case SSD1803_5V :
wim	33:900a94bc7585	1800	_writeCommand(0x20 \| _function_1); // Select Ext Instr Set
wim	33:900a94bc7585	1801	_writeCommand(0x02); // Power On
wim	32:59c4b8f648d4	1802	_writeCommand(0x20 \| _function); // Select Std Instr Set
wim	32:59c4b8f648d4	1803	break;
wim	32:59c4b8f648d4	1804
wim	32:59c4b8f648d4	1805	default:
wim	32:59c4b8f648d4	1806	//Unsupported feature for other controllers
wim	32:59c4b8f648d4	1807	break;
wim	32:59c4b8f648d4	1808	} // end switch
wim	32:59c4b8f648d4	1809	}
wim	32:59c4b8f648d4	1810	else {
wim	32:59c4b8f648d4	1811	// Switch off
wim	32:59c4b8f648d4	1812	setMode(DispOff);
wim	32:59c4b8f648d4	1813
wim	32:59c4b8f648d4	1814	// Controllers that support specific Power Down mode
wim	32:59c4b8f648d4	1815	switch (_ctrl) {
wim	32:59c4b8f648d4	1816
wim	32:59c4b8f648d4	1817	// case PCF2113_3V3 :
wim	32:59c4b8f648d4	1818	// case PCF2119_3V3 :
wim	32:59c4b8f648d4	1819	// case ST7032_3V3 :
wim	32:59c4b8f648d4	1820	//@todo
wim	33:900a94bc7585	1821	// disable Booster Bon
wim	33:900a94bc7585	1822
wim	33:900a94bc7585	1823	case WS0010:
wim	33:900a94bc7585	1824	_writeCommand(0x13); // Char mode, DC/DC off
wim	33:900a94bc7585	1825	break;
wim	33:900a94bc7585	1826
wim	33:900a94bc7585	1827	case KS0078:
wim	32:59c4b8f648d4	1828	case SSD1803_3V3 :
wim	32:59c4b8f648d4	1829	// case SSD1803_5V :
wim	33:900a94bc7585	1830	_writeCommand(0x20 \| _function_1); // Select Ext Instr Set
wim	33:900a94bc7585	1831	_writeCommand(0x03); // Power Down
wim	32:59c4b8f648d4	1832	_writeCommand(0x20 \| _function); // Select Std Instr Set
wim	32:59c4b8f648d4	1833	break;
wim	32:59c4b8f648d4	1834
wim	32:59c4b8f648d4	1835	default:
wim	32:59c4b8f648d4	1836	//Unsupported feature for other controllers
wim	32:59c4b8f648d4	1837	break;
wim	32:59c4b8f648d4	1838	} // end switch
wim	32:59c4b8f648d4	1839	}
wim	33:900a94bc7585	1840	} // end setPower()
wim	33:900a94bc7585	1841
wim	33:900a94bc7585	1842
wim	33:900a94bc7585	1843	/** Set Orient
wim	33:900a94bc7585	1844	* setOrient method is supported by some compatible devices (eg SSD1803, US2066) that have top/bottom view modes
wim	33:900a94bc7585	1845	*
wim	33:900a94bc7585	1846	* @param LCDOrient orient Orientation
wim	33:900a94bc7585	1847	* @return none
wim	33:900a94bc7585	1848	*/
wim	33:900a94bc7585	1849	void TextLCD_Base::setOrient(LCDOrient orient){
wim	33:900a94bc7585	1850
wim	33:900a94bc7585	1851	switch (orient) {
wim	33:900a94bc7585	1852
wim	33:900a94bc7585	1853	case Top:
wim	33:900a94bc7585	1854	switch (_ctrl) {
wim	33:900a94bc7585	1855	case SSD1803_3V3 :
wim	33:900a94bc7585	1856	// case SSD1803_5V :
wim	33:900a94bc7585	1857	case US2066_3V3 :
wim	33:900a94bc7585	1858	_writeCommand(0x20 \| _function_1); // Set function, 0 0 1 X N BE RE(1) REV
wim	33:900a94bc7585	1859	// Select Extended Instruction Set
wim	33:900a94bc7585	1860	// _writeCommand(0x06); // Set ext entry mode, 0 0 0 0 0 1 BDC=1 COM1-32, BDS=0 SEG100-1 "Bottom View" (Ext Instr Set)
wim	33:900a94bc7585	1861	_writeCommand(0x05); // Set ext entry mode, 0 0 0 0 0 1 BDC=0 COM32-1, BDS=1 SEG1-100 "Top View" (Ext Instr Set)
wim	33:900a94bc7585	1862
wim	33:900a94bc7585	1863	_writeCommand(0x20 \| _function); // Set function, 0 0 1 DL N DH RE(0) IS=0 Select Instruction Set 0
wim	33:900a94bc7585	1864	// Select Std Instr set, Select IS=0
wim	33:900a94bc7585	1865	break;
wim	33:900a94bc7585	1866
wim	33:900a94bc7585	1867	default:
wim	33:900a94bc7585	1868	//Unsupported feature for other controllers
wim	33:900a94bc7585	1869	break;
wim	33:900a94bc7585	1870
wim	33:900a94bc7585	1871	} // end switch _ctrl
wim	33:900a94bc7585	1872	break; // end Top
wim	33:900a94bc7585	1873
wim	33:900a94bc7585	1874	case Bottom:
wim	33:900a94bc7585	1875	switch (_ctrl) {
wim	33:900a94bc7585	1876	case SSD1803_3V3 :
wim	33:900a94bc7585	1877	// case SSD1803_5V :
wim	33:900a94bc7585	1878	case US2066_3V3 :
wim	33:900a94bc7585	1879	_writeCommand(0x20 \| _function_1); // Set function, 0 0 1 X N BE RE(1) REV
wim	33:900a94bc7585	1880	// Select Extended Instruction Set
wim	33:900a94bc7585	1881	_writeCommand(0x06); // Set ext entry mode, 0 0 0 0 0 1 BDC=1 COM1-32, BDS=0 SEG100-1 "Bottom View" (Ext Instr Set)
wim	33:900a94bc7585	1882	// _writeCommand(0x05); // Set ext entry mode, 0 0 0 0 0 1 BDC=0 COM32-1, BDS=1 SEG1-100 "Top View" (Ext Instr Set)
wim	33:900a94bc7585	1883
wim	33:900a94bc7585	1884	_writeCommand(0x20 \| _function); // Set function, 0 0 1 DL N DH RE(0) IS=0 Select Instruction Set 0
wim	33:900a94bc7585	1885	// Select Std Instr set, Select IS=0
wim	33:900a94bc7585	1886	break;
wim	33:900a94bc7585	1887
wim	33:900a94bc7585	1888	default:
wim	33:900a94bc7585	1889	//Unsupported feature for other controllers
wim	33:900a94bc7585	1890	break;
wim	33:900a94bc7585	1891
wim	33:900a94bc7585	1892	} // end switch _ctrl
wim	33:900a94bc7585	1893
wim	33:900a94bc7585	1894	break; // end Bottom
wim	33:900a94bc7585	1895	} // end switch orient
wim	33:900a94bc7585	1896	} // end setOrient()
wim	33:900a94bc7585	1897
wim	33:900a94bc7585	1898
wim	32:59c4b8f648d4	1899
wim	23:d47f226efb24	1900	//--------- End TextLCD_Base -----------
wim	21:9eb628d9e164	1901
wim	22:35742ec80c24	1902
wim	23:d47f226efb24	1903	//--------- Start TextLCD Bus -----------
wim	21:9eb628d9e164	1904
wim	21:9eb628d9e164	1905	/* Create a TextLCD interface for using regular mbed pins
wim	21:9eb628d9e164	1906	*
wim	21:9eb628d9e164	1907	* @param rs Instruction/data control line
wim	21:9eb628d9e164	1908	* @param e Enable line (clock)
wim	21:9eb628d9e164	1909	* @param d4-d7 Data lines for using as a 4-bit interface
wim	21:9eb628d9e164	1910	* @param type Sets the panel size/addressing mode (default = LCD16x2)
wim	21:9eb628d9e164	1911	* @param bl Backlight control line (optional, default = NC)
wim	21:9eb628d9e164	1912	* @param e2 Enable2 line (clock for second controller, LCD40x4 only)
wim	21:9eb628d9e164	1913	* @param ctrl LCD controller (default = HD44780)
wim	21:9eb628d9e164	1914	*/
wim	21:9eb628d9e164	1915	TextLCD::TextLCD(PinName rs, PinName e,
wim	21:9eb628d9e164	1916	PinName d4, PinName d5, PinName d6, PinName d7,
wim	21:9eb628d9e164	1917	LCDType type, PinName bl, PinName e2, LCDCtrl ctrl) :
wim	21:9eb628d9e164	1918	TextLCD_Base(type, ctrl),
wim	22:35742ec80c24	1919	_rs(rs), _e(e), _d(d4, d5, d6, d7) {
wim	22:35742ec80c24	1920
wim	22:35742ec80c24	1921	// The hardware Backlight pin is optional. Test and make sure whether it exists or not to prevent illegal access.
wim	22:35742ec80c24	1922	if (bl != NC) {
wim	22:35742ec80c24	1923	_bl = new DigitalOut(bl); //Construct new pin
wim	22:35742ec80c24	1924	_bl->write(0); //Deactivate
wim	22:35742ec80c24	1925	}
wim	22:35742ec80c24	1926	else {
wim	22:35742ec80c24	1927	// No Hardware Backlight pin
wim	22:35742ec80c24	1928	_bl = NULL; //Construct dummy pin
wim	22:35742ec80c24	1929	}
wim	22:35742ec80c24	1930
wim	22:35742ec80c24	1931	// The hardware Enable2 pin is only needed for LCD40x4. Test and make sure whether it exists or not to prevent illegal access.
wim	22:35742ec80c24	1932	if (e2 != NC) {
wim	22:35742ec80c24	1933	_e2 = new DigitalOut(e2); //Construct new pin
wim	22:35742ec80c24	1934	_e2->write(0); //Deactivate
wim	22:35742ec80c24	1935	}
wim	22:35742ec80c24	1936	else {
wim	22:35742ec80c24	1937	// No Hardware Enable pin
wim	22:35742ec80c24	1938	_e2 = NULL; //Construct dummy pin
wim	22:35742ec80c24	1939	}
wim	21:9eb628d9e164	1940
wim	21:9eb628d9e164	1941	_init();
wim	21:9eb628d9e164	1942	}
wim	21:9eb628d9e164	1943
wim	29:a3663151aa65	1944	/** Destruct a TextLCD interface for using regular mbed pins
wim	29:a3663151aa65	1945	*
wim	29:a3663151aa65	1946	* @param none
wim	29:a3663151aa65	1947	* @return none
wim	29:a3663151aa65	1948	*/
wim	29:a3663151aa65	1949	TextLCD::~TextLCD() {
wim	29:a3663151aa65	1950	if (_bl != NULL) {delete _bl;} // BL pin
wim	29:a3663151aa65	1951	if (_e2 != NULL) {delete _e2;} // E2 pin
wim	29:a3663151aa65	1952	}
wim	29:a3663151aa65	1953
wim	29:a3663151aa65	1954
wim	22:35742ec80c24	1955	/** Set E pin (or E2 pin)
wim	22:35742ec80c24	1956	* Used for mbed pins, I2C bus expander or SPI shiftregister
wim	22:35742ec80c24	1957	* Default PinName value for E2 is NC, must be used as pointer to avoid issues with mbed lib and DigitalOut pins
wim	22:35742ec80c24	1958	* @param value true or false
wim	22:35742ec80c24	1959	* @return none
wim	22:35742ec80c24	1960	*/
wim	21:9eb628d9e164	1961	void TextLCD::_setEnable(bool value) {
wim	21:9eb628d9e164	1962
wim	22:35742ec80c24	1963	if(_ctrl_idx==_LCDCtrl_0) {
wim	22:35742ec80c24	1964	if (value) {
wim	22:35742ec80c24	1965	_e = 1; // Set E bit
wim	22:35742ec80c24	1966	}
wim	22:35742ec80c24	1967	else {
wim	22:35742ec80c24	1968	_e = 0; // Reset E bit
wim	22:35742ec80c24	1969	}
wim	22:35742ec80c24	1970	}
wim	22:35742ec80c24	1971	else {
wim	22:35742ec80c24	1972	if (value) {
wim	22:35742ec80c24	1973	if (_e2 != NULL) {_e2->write(1);} //Set E2 bit
wim	22:35742ec80c24	1974	}
wim	22:35742ec80c24	1975	else {
wim	22:35742ec80c24	1976	if (_e2 != NULL) {_e2->write(0);} //Reset E2 bit
wim	22:35742ec80c24	1977	}
wim	22:35742ec80c24	1978	}
wim	21:9eb628d9e164	1979	}
wim	21:9eb628d9e164	1980
wim	21:9eb628d9e164	1981	// Set RS pin
wim	21:9eb628d9e164	1982	// Used for mbed pins, I2C bus expander or SPI shiftregister
wim	21:9eb628d9e164	1983	void TextLCD::_setRS(bool value) {
wim	21:9eb628d9e164	1984
wim	22:35742ec80c24	1985	if (value) {
wim	21:9eb628d9e164	1986	_rs = 1; // Set RS bit
wim	22:35742ec80c24	1987	}
wim	22:35742ec80c24	1988	else {
wim	21:9eb628d9e164	1989	_rs = 0; // Reset RS bit
wim	22:35742ec80c24	1990	}
wim	21:9eb628d9e164	1991	}
wim	21:9eb628d9e164	1992
wim	22:35742ec80c24	1993	/** Set BL pin
wim	22:35742ec80c24	1994	* Used for mbed pins, I2C bus expander or SPI shiftregister
wim	22:35742ec80c24	1995	* Default PinName value is NC, must be used as pointer to avoid issues with mbed lib and DigitalOut pins
wim	22:35742ec80c24	1996	* @param value true or false
wim	22:35742ec80c24	1997	* @return none
wim	22:35742ec80c24	1998	*/
wim	21:9eb628d9e164	1999	void TextLCD::_setBL(bool value) {
wim	21:9eb628d9e164	2000
wim	22:35742ec80c24	2001	if (value) {
wim	22:35742ec80c24	2002	if (_bl != NULL) {_bl->write(1);} //Set BL bit
wim	22:35742ec80c24	2003	}
wim	22:35742ec80c24	2004	else {
wim	22:35742ec80c24	2005	if (_bl != NULL) {_bl->write(0);} //Reset BL bit
wim	22:35742ec80c24	2006	}
wim	21:9eb628d9e164	2007	}
wim	21:9eb628d9e164	2008
wim	21:9eb628d9e164	2009	// Place the 4bit data on the databus
wim	21:9eb628d9e164	2010	// Used for mbed pins, I2C bus expander or SPI shifregister
wim	21:9eb628d9e164	2011	void TextLCD::_setData(int value) {
wim	21:9eb628d9e164	2012	_d = value & 0x0F; // Write Databits
wim	21:9eb628d9e164	2013	}
wim	22:35742ec80c24	2014
wim	23:d47f226efb24	2015	//----------- End TextLCD ---------------
wim	21:9eb628d9e164	2016
wim	21:9eb628d9e164	2017
wim	23:d47f226efb24	2018	//--------- Start TextLCD_I2C -----------
wim	22:35742ec80c24	2019
wim	26:bd897a001012	2020	/** Create a TextLCD interface using an I2C PC8574 (or PCF8574A) or MCP23008 portexpander
wim	22:35742ec80c24	2021	*
wim	22:35742ec80c24	2022	* @param i2c I2C Bus
wim	26:bd897a001012	2023	* @param deviceAddress I2C slave address (PCF8574, PCF8574A or MCP23008, default = 0x40)
wim	22:35742ec80c24	2024	* @param type Sets the panel size/addressing mode (default = LCD16x2)
wim	22:35742ec80c24	2025	* @param ctrl LCD controller (default = HD44780)
wim	22:35742ec80c24	2026	*/
wim	21:9eb628d9e164	2027	TextLCD_I2C::TextLCD_I2C(I2C *i2c, char deviceAddress, LCDType type, LCDCtrl ctrl) :
wim	21:9eb628d9e164	2028	TextLCD_Base(type, ctrl),
wim	21:9eb628d9e164	2029	_i2c(i2c){
wim	21:9eb628d9e164	2030
wim	22:35742ec80c24	2031	_slaveAddress = deviceAddress & 0xFE;
wim	28:30fa94f7341c	2032
wim	28:30fa94f7341c	2033	// Setup the I2C bus
wim	28:30fa94f7341c	2034	// The max bitrate for PCF8574 is 100kbit, the max bitrate for MCP23008 is 400kbit,
wim	32:59c4b8f648d4	2035	_i2c->frequency(100000);
wim	21:9eb628d9e164	2036
wim	26:bd897a001012	2037	#if (MCP23008==1)
wim	26:bd897a001012	2038	// MCP23008 portexpander Init
wim	27:22d5086f6ba6	2039	_write_register(IODIR, 0x00); // All outputs
wim	27:22d5086f6ba6	2040	_write_register(IPOL, 0x00); // No reverse polarity
wim	27:22d5086f6ba6	2041	_write_register(GPINTEN, 0x00); // No interrupt
wim	27:22d5086f6ba6	2042	_write_register(DEFVAL, 0x00); // Default value to compare against for interrupts
wim	27:22d5086f6ba6	2043	_write_register(INTCON, 0x00); // No interrupt on changes
wim	27:22d5086f6ba6	2044	_write_register(IOCON, 0x00); // Interrupt polarity
wim	27:22d5086f6ba6	2045	_write_register(GPPU, 0x00); // No Pullup
wim	27:22d5086f6ba6	2046	_write_register(INTF, 0x00); //
wim	27:22d5086f6ba6	2047	_write_register(INTCAP, 0x00); //
wim	27:22d5086f6ba6	2048	_write_register(GPIO, 0x00); // Output/Input pins
wim	27:22d5086f6ba6	2049	_write_register(OLAT, 0x00); // Output Latch
wim	26:bd897a001012	2050
wim	21:9eb628d9e164	2051	// Init the portexpander bus
wim	21:9eb628d9e164	2052	_lcd_bus = D_LCD_BUS_DEF;
wim	21:9eb628d9e164	2053
wim	21:9eb628d9e164	2054	// write the new data to the portexpander
wim	26:bd897a001012	2055	_write_register(GPIO, _lcd_bus);
wim	26:bd897a001012	2056	#else
wim	26:bd897a001012	2057	// PCF8574 of PCF8574A portexpander
wim	26:bd897a001012	2058
wim	26:bd897a001012	2059	// Init the portexpander bus
wim	26:bd897a001012	2060	_lcd_bus = D_LCD_BUS_DEF;
wim	26:bd897a001012	2061
wim	26:bd897a001012	2062	// write the new data to the portexpander
wim	21:9eb628d9e164	2063	_i2c->write(_slaveAddress, &_lcd_bus, 1);
wim	26:bd897a001012	2064	#endif
wim	21:9eb628d9e164	2065
wim	30:033048611c01	2066	_init();
wim	21:9eb628d9e164	2067	}
wim	21:9eb628d9e164	2068
wim	21:9eb628d9e164	2069	// Set E pin (or E2 pin)
wim	21:9eb628d9e164	2070	// Used for mbed pins, I2C bus expander or SPI shiftregister
wim	21:9eb628d9e164	2071	void TextLCD_I2C::_setEnable(bool value) {
wim	21:9eb628d9e164	2072
wim	22:35742ec80c24	2073	if(_ctrl_idx==_LCDCtrl_0) {
wim	26:bd897a001012	2074	if (value) {
wim	22:35742ec80c24	2075	_lcd_bus \|= D_LCD_E; // Set E bit
wim	26:bd897a001012	2076	}
wim	26:bd897a001012	2077	else {
wim	22:35742ec80c24	2078	_lcd_bus &= ~D_LCD_E; // Reset E bit
wim	26:bd897a001012	2079	}
wim	22:35742ec80c24	2080	}
wim	22:35742ec80c24	2081	else {
wim	26:bd897a001012	2082	if (value) {
wim	22:35742ec80c24	2083	_lcd_bus \|= D_LCD_E2; // Set E2 bit
wim	26:bd897a001012	2084	}
wim	26:bd897a001012	2085	else {
wim	22:35742ec80c24	2086	_lcd_bus &= ~D_LCD_E2; // Reset E2bit
wim	26:bd897a001012	2087	}
wim	26:bd897a001012	2088	}
wim	26:bd897a001012	2089
wim	26:bd897a001012	2090	#if (MCP23008==1)
wim	26:bd897a001012	2091	// MCP23008 portexpander
wim	26:bd897a001012	2092
wim	26:bd897a001012	2093	// write the new data to the portexpander
wim	26:bd897a001012	2094	_write_register(GPIO, _lcd_bus);
wim	26:bd897a001012	2095	#else
wim	26:bd897a001012	2096	// PCF8574 of PCF8574A portexpander
wim	21:9eb628d9e164	2097
wim	22:35742ec80c24	2098	// write the new data to the I2C portexpander
wim	22:35742ec80c24	2099	_i2c->write(_slaveAddress, &_lcd_bus, 1);
wim	26:bd897a001012	2100	#endif
wim	21:9eb628d9e164	2101	}
wim	21:9eb628d9e164	2102
wim	21:9eb628d9e164	2103	// Set RS pin
wim	21:9eb628d9e164	2104	// Used for mbed pins, I2C bus expander or SPI shiftregister
wim	21:9eb628d9e164	2105	void TextLCD_I2C::_setRS(bool value) {
wim	21:9eb628d9e164	2106
wim	26:bd897a001012	2107	if (value) {
wim	22:35742ec80c24	2108	_lcd_bus \|= D_LCD_RS; // Set RS bit
wim	26:bd897a001012	2109	}
wim	26:bd897a001012	2110	else {
wim	22:35742ec80c24	2111	_lcd_bus &= ~D_LCD_RS; // Reset RS bit
wim	26:bd897a001012	2112	}
wim	26:bd897a001012	2113
wim	26:bd897a001012	2114	#if (MCP23008==1)
wim	26:bd897a001012	2115	// MCP23008 portexpander
wim	26:bd897a001012	2116
wim	26:bd897a001012	2117	// write the new data to the portexpander
wim	26:bd897a001012	2118	_write_register(GPIO, _lcd_bus);
wim	26:bd897a001012	2119	#else
wim	26:bd897a001012	2120	// PCF8574 of PCF8574A portexpander
wim	21:9eb628d9e164	2121
wim	22:35742ec80c24	2122	// write the new data to the I2C portexpander
wim	22:35742ec80c24	2123	_i2c->write(_slaveAddress, &_lcd_bus, 1);
wim	30:033048611c01	2124	#endif
wim	21:9eb628d9e164	2125	}
wim	21:9eb628d9e164	2126
wim	21:9eb628d9e164	2127	// Set BL pin
wim	21:9eb628d9e164	2128	// Used for mbed pins, I2C bus expander or SPI shiftregister
wim	21:9eb628d9e164	2129	void TextLCD_I2C::_setBL(bool value) {
wim	21:9eb628d9e164	2130
wim	33:900a94bc7585	2131	#if (DFROBOT==1)
wim	33:900a94bc7585	2132	value = !value; // The DFRobot module uses PNP transistor to drive the Backlight. Reverse logic level.
wim	33:900a94bc7585	2133	#endif
wim	33:900a94bc7585	2134
wim	26:bd897a001012	2135	if (value) {
wim	21:9eb628d9e164	2136	_lcd_bus \|= D_LCD_BL; // Set BL bit
wim	26:bd897a001012	2137	}
wim	26:bd897a001012	2138	else {
wim	21:9eb628d9e164	2139	_lcd_bus &= ~D_LCD_BL; // Reset BL bit
wim	26:bd897a001012	2140	}
wim	26:bd897a001012	2141
wim	26:bd897a001012	2142	#if (MCP23008==1)
wim	26:bd897a001012	2143	// MCP23008 portexpander
wim	26:bd897a001012	2144
wim	26:bd897a001012	2145	// write the new data to the portexpander
wim	26:bd897a001012	2146	_write_register(GPIO, _lcd_bus);
wim	26:bd897a001012	2147	#else
wim	26:bd897a001012	2148	// PCF8574 of PCF8574A portexpander
wim	21:9eb628d9e164	2149
wim	21:9eb628d9e164	2150	// write the new data to the I2C portexpander
wim	21:9eb628d9e164	2151	_i2c->write(_slaveAddress, &_lcd_bus, 1);
wim	30:033048611c01	2152	#endif
wim	21:9eb628d9e164	2153	}
wim	21:9eb628d9e164	2154
wim	21:9eb628d9e164	2155
wim	21:9eb628d9e164	2156	// Place the 4bit data on the databus
wim	21:9eb628d9e164	2157	// Used for mbed pins, I2C bus expander or SPI shifregister
wim	21:9eb628d9e164	2158	void TextLCD_I2C::_setData(int value) {
wim	21:9eb628d9e164	2159	int data;
wim	22:35742ec80c24	2160
wim	22:35742ec80c24	2161	// Set bit by bit to support any mapping of expander portpins to LCD pins
wim	21:9eb628d9e164	2162
wim	22:35742ec80c24	2163	data = value & 0x0F;
wim	26:bd897a001012	2164	if (data & 0x01){
wim	22:35742ec80c24	2165	_lcd_bus \|= D_LCD_D4; // Set Databit
wim	26:bd897a001012	2166	}
wim	26:bd897a001012	2167	else {
wim	26:bd897a001012	2168	_lcd_bus &= ~D_LCD_D4; // Reset Databit
wim	26:bd897a001012	2169	}
wim	21:9eb628d9e164	2170
wim	26:bd897a001012	2171	if (data & 0x02){
wim	22:35742ec80c24	2172	_lcd_bus \|= D_LCD_D5; // Set Databit
wim	26:bd897a001012	2173	}
wim	26:bd897a001012	2174	else {
wim	26:bd897a001012	2175	_lcd_bus &= ~D_LCD_D5; // Reset Databit
wim	26:bd897a001012	2176	}
wim	21:9eb628d9e164	2177
wim	26:bd897a001012	2178	if (data & 0x04) {
wim	22:35742ec80c24	2179	_lcd_bus \|= D_LCD_D6; // Set Databit
wim	26:bd897a001012	2180	}
wim	26:bd897a001012	2181	else {
wim	26:bd897a001012	2182	_lcd_bus &= ~D_LCD_D6; // Reset Databit
wim	26:bd897a001012	2183	}
wim	21:9eb628d9e164	2184
wim	26:bd897a001012	2185	if (data & 0x08) {
wim	22:35742ec80c24	2186	_lcd_bus \|= D_LCD_D7; // Set Databit
wim	26:bd897a001012	2187	}
wim	26:bd897a001012	2188	else {
wim	26:bd897a001012	2189	_lcd_bus &= ~D_LCD_D7; // Reset Databit
wim	26:bd897a001012	2190	}
wim	21:9eb628d9e164	2191
wim	26:bd897a001012	2192	#if (MCP23008==1)
wim	26:bd897a001012	2193	// MCP23008 portexpander
wim	26:bd897a001012	2194
wim	26:bd897a001012	2195	// write the new data to the portexpander
wim	26:bd897a001012	2196	_write_register(GPIO, _lcd_bus);
wim	26:bd897a001012	2197	#else
wim	26:bd897a001012	2198	// PCF8574 of PCF8574A portexpander
wim	26:bd897a001012	2199
wim	22:35742ec80c24	2200	// write the new data to the I2C portexpander
wim	26:bd897a001012	2201	_i2c->write(_slaveAddress, &_lcd_bus, 1);
wim	26:bd897a001012	2202	#endif
wim	22:35742ec80c24	2203
wim	22:35742ec80c24	2204	}
wim	21:9eb628d9e164	2205
wim	26:bd897a001012	2206	// Write data to MCP23008 I2C portexpander
wim	26:bd897a001012	2207	void TextLCD_I2C::_write_register (int reg, int value) {
wim	26:bd897a001012	2208	char data[] = {reg, value};
wim	26:bd897a001012	2209
wim	30:033048611c01	2210	_i2c->write(_slaveAddress, data, 2);
wim	26:bd897a001012	2211	}
wim	26:bd897a001012	2212
wim	23:d47f226efb24	2213	//---------- End TextLCD_I2C ------------
wim	21:9eb628d9e164	2214
wim	21:9eb628d9e164	2215
wim	28:30fa94f7341c	2216	//--------- Start TextLCD_I2C_N ---------
wim	28:30fa94f7341c	2217
wim	28:30fa94f7341c	2218	/** Create a TextLCD interface using a controller with native I2C interface
wim	28:30fa94f7341c	2219	*
wim	28:30fa94f7341c	2220	* @param i2c I2C Bus
wim	28:30fa94f7341c	2221	* @param deviceAddress I2C slave address (default = 0x7C)
wim	28:30fa94f7341c	2222	* @param type Sets the panel size/addressing mode (default = LCD16x2)
wim	28:30fa94f7341c	2223	* @param bl Backlight control line (optional, default = NC)
wim	28:30fa94f7341c	2224	* @param ctrl LCD controller (default = ST7032_3V3)
wim	28:30fa94f7341c	2225	*/
wim	28:30fa94f7341c	2226	TextLCD_I2C_N::TextLCD_I2C_N(I2C *i2c, char deviceAddress, LCDType type, PinName bl, LCDCtrl ctrl) :
wim	28:30fa94f7341c	2227	TextLCD_Base(type, ctrl),
wim	32:59c4b8f648d4	2228
wim	33:900a94bc7585	2229	_i2c(i2c){
wim	30:033048611c01	2230
wim	28:30fa94f7341c	2231	_slaveAddress = deviceAddress & 0xFE;
wim	28:30fa94f7341c	2232
wim	28:30fa94f7341c	2233	// Setup the I2C bus
wim	29:a3663151aa65	2234	// The max bitrate for ST7032i is 400kbit, lets stick to default here
wim	29:a3663151aa65	2235	_i2c->frequency(100000);
wim	32:59c4b8f648d4	2236
wim	30:033048611c01	2237
wim	28:30fa94f7341c	2238	// The hardware Backlight pin is optional. Test and make sure whether it exists or not to prevent illegal access.
wim	28:30fa94f7341c	2239	if (bl != NC) {
wim	28:30fa94f7341c	2240	_bl = new DigitalOut(bl); //Construct new pin
wim	28:30fa94f7341c	2241	_bl->write(0); //Deactivate
wim	28:30fa94f7341c	2242	}
wim	28:30fa94f7341c	2243	else {
wim	28:30fa94f7341c	2244	// No Hardware Backlight pin
wim	28:30fa94f7341c	2245	_bl = NULL; //Construct dummy pin
wim	28:30fa94f7341c	2246	}
wim	28:30fa94f7341c	2247
wim	30:033048611c01	2248	//Sanity check
wim	30:033048611c01	2249	if (_ctrl & LCD_C_I2C) {
wim	30:033048611c01	2250	_init();
wim	30:033048611c01	2251	}
wim	30:033048611c01	2252	else {
wim	30:033048611c01	2253	error("Error: LCD Controller type does not support native I2C interface\n\r");
wim	30:033048611c01	2254	}
wim	30:033048611c01	2255
wim	28:30fa94f7341c	2256	}
wim	28:30fa94f7341c	2257
wim	28:30fa94f7341c	2258	TextLCD_I2C_N::~TextLCD_I2C_N() {
wim	28:30fa94f7341c	2259	if (_bl != NULL) {delete _bl;} // BL pin
wim	28:30fa94f7341c	2260	}
wim	28:30fa94f7341c	2261
wim	28:30fa94f7341c	2262	// Not used in this mode
wim	28:30fa94f7341c	2263	void TextLCD_I2C_N::_setEnable(bool value) {
wim	28:30fa94f7341c	2264	}
wim	28:30fa94f7341c	2265
wim	28:30fa94f7341c	2266	// Set RS pin
wim	28:30fa94f7341c	2267	// Used for mbed pins, I2C bus expander or SPI shiftregister and native I2C or SPI
wim	28:30fa94f7341c	2268	void TextLCD_I2C_N::_setRS(bool value) {
wim	30:033048611c01	2269	// The controlbyte defines the meaning of the next byte. This next byte can either be data or command.
wim	30:033048611c01	2270	// Start Slaveaddress+RW b7 b6 b5 b4 b3 b2 b1 b0 b7...........b0 Stop
wim	30:033048611c01	2271	// Co RS RW 0 0 0 0 0 command or data
wim	30:033048611c01	2272	//
wim	30:033048611c01	2273	// C0=1 indicates that another controlbyte will follow after the next data or command byte
wim	30:033048611c01	2274	// RS=1 means that next byte is data, RS=0 means that next byte is command
wim	30:033048611c01	2275	// RW=0 means write to controller. RW=1 means that controller will be read from after the next command.
wim	30:033048611c01	2276	// Many native I2C controllers dont support this option and it is not used by this lib.
wim	30:033048611c01	2277	//
wim	30:033048611c01	2278
wim	28:30fa94f7341c	2279	if (value) {
wim	28:30fa94f7341c	2280	_controlbyte = 0x40; // Next byte is data, No more control bytes will follow
wim	28:30fa94f7341c	2281	}
wim	28:30fa94f7341c	2282	else {
wim	28:30fa94f7341c	2283	_controlbyte = 0x00; // Next byte is command, No more control bytes will follow
wim	28:30fa94f7341c	2284	}
wim	28:30fa94f7341c	2285	}
wim	28:30fa94f7341c	2286
wim	28:30fa94f7341c	2287	// Set BL pin
wim	28:30fa94f7341c	2288	void TextLCD_I2C_N::_setBL(bool value) {
wim	28:30fa94f7341c	2289	if (_bl) {
wim	28:30fa94f7341c	2290	_bl->write(value);
wim	28:30fa94f7341c	2291	}
wim	28:30fa94f7341c	2292	}
wim	29:a3663151aa65	2293
wim	29:a3663151aa65	2294	// Not used in this mode
wim	29:a3663151aa65	2295	void TextLCD_I2C_N::_setData(int value) {
wim	29:a3663151aa65	2296	}
wim	29:a3663151aa65	2297
wim	28:30fa94f7341c	2298	// Write a byte using I2C
wim	28:30fa94f7341c	2299	void TextLCD_I2C_N::_writeByte(int value) {
wim	30:033048611c01	2300	// The controlbyte defines the meaning of the next byte. This next byte can either be data or command.
wim	30:033048611c01	2301	// Start Slaveaddress+RW b7 b6 b5 b4 b3 b2 b1 b0 b7...........b0 Stop
wim	30:033048611c01	2302	// Co RS RW 0 0 0 0 0 command or data
wim	30:033048611c01	2303	//
wim	30:033048611c01	2304	// C0=1 indicates that another controlbyte will follow after the next data or command byte
wim	30:033048611c01	2305	// RS=1 means that next byte is data, RS=0 means that next byte is command
wim	30:033048611c01	2306	// RW=0 means write to controller. RW=1 means that controller will be read from after the next command.
wim	30:033048611c01	2307	// Many native I2C controllers dont support this option and it is not used by this lib.
wim	30:033048611c01	2308	//
wim	28:30fa94f7341c	2309	char data[] = {_controlbyte, value};
wim	28:30fa94f7341c	2310
wim	32:59c4b8f648d4	2311	#if(LCD_I2C_ACK==1)
wim	32:59c4b8f648d4	2312	//Controllers that support ACK
wim	30:033048611c01	2313	_i2c->write(_slaveAddress, data, 2);
wim	32:59c4b8f648d4	2314	#else
wim	32:59c4b8f648d4	2315	//Controllers that dont support ACK
wim	32:59c4b8f648d4	2316	_i2c->start();
wim	32:59c4b8f648d4	2317	_i2c->write(_slaveAddress);
wim	32:59c4b8f648d4	2318	_i2c->write(data[0]);
wim	32:59c4b8f648d4	2319	_i2c->write(data[1]);
wim	32:59c4b8f648d4	2320	_i2c->stop();
wim	32:59c4b8f648d4	2321	#endif
wim	28:30fa94f7341c	2322	}
wim	28:30fa94f7341c	2323
wim	28:30fa94f7341c	2324	//-------- End TextLCD_I2C_N ------------
wim	28:30fa94f7341c	2325
wim	28:30fa94f7341c	2326
wim	23:d47f226efb24	2327	//--------- Start TextLCD_SPI -----------
wim	21:9eb628d9e164	2328
wim	22:35742ec80c24	2329	/** Create a TextLCD interface using an SPI 74595 portexpander
wim	22:35742ec80c24	2330	*
wim	22:35742ec80c24	2331	* @param spi SPI Bus
wim	22:35742ec80c24	2332	* @param cs chip select pin (active low)
wim	22:35742ec80c24	2333	* @param type Sets the panel size/addressing mode (default = LCD16x2)
wim	22:35742ec80c24	2334	* @param ctrl LCD controller (default = HD44780)
wim	22:35742ec80c24	2335	*/
wim	21:9eb628d9e164	2336	TextLCD_SPI::TextLCD_SPI(SPI *spi, PinName cs, LCDType type, LCDCtrl ctrl) :
wim	21:9eb628d9e164	2337	TextLCD_Base(type, ctrl),
wim	21:9eb628d9e164	2338	_spi(spi),
wim	21:9eb628d9e164	2339	_cs(cs) {
wim	21:9eb628d9e164	2340
wim	32:59c4b8f648d4	2341	// Init cs
wim	32:59c4b8f648d4	2342	_setCS(true);
wim	32:59c4b8f648d4	2343
wim	21:9eb628d9e164	2344	// Setup the spi for 8 bit data, low steady state clock,
wim	21:9eb628d9e164	2345	// rising edge capture, with a 500KHz or 1MHz clock rate
wim	21:9eb628d9e164	2346	_spi->format(8,0);
wim	21:9eb628d9e164	2347	_spi->frequency(500000);
wim	21:9eb628d9e164	2348	//_spi.frequency(1000000);
wim	21:9eb628d9e164	2349
wim	21:9eb628d9e164	2350	// Init the portexpander bus
wim	21:9eb628d9e164	2351	_lcd_bus = D_LCD_BUS_DEF;
wim	21:9eb628d9e164	2352
wim	21:9eb628d9e164	2353	// write the new data to the portexpander
wim	21:9eb628d9e164	2354	_setCS(false);
wim	21:9eb628d9e164	2355	_spi->write(_lcd_bus);
wim	21:9eb628d9e164	2356	_setCS(true);
wim	30:033048611c01	2357
wim	30:033048611c01	2358	_init();
wim	21:9eb628d9e164	2359	}
wim	21:9eb628d9e164	2360
wim	21:9eb628d9e164	2361	// Set E pin (or E2 pin)
wim	21:9eb628d9e164	2362	// Used for mbed pins, I2C bus expander or SPI shiftregister
wim	21:9eb628d9e164	2363	void TextLCD_SPI::_setEnable(bool value) {
wim	21:9eb628d9e164	2364
wim	22:35742ec80c24	2365	if(_ctrl_idx==_LCDCtrl_0) {
wim	26:bd897a001012	2366	if (value) {
wim	22:35742ec80c24	2367	_lcd_bus \|= D_LCD_E; // Set E bit
wim	26:bd897a001012	2368	}
wim	26:bd897a001012	2369	else {
wim	22:35742ec80c24	2370	_lcd_bus &= ~D_LCD_E; // Reset E bit
wim	26:bd897a001012	2371	}
wim	22:35742ec80c24	2372	}
wim	22:35742ec80c24	2373	else {
wim	26:bd897a001012	2374	if (value) {
wim	22:35742ec80c24	2375	_lcd_bus \|= D_LCD_E2; // Set E2 bit
wim	26:bd897a001012	2376	}
wim	26:bd897a001012	2377	else {
wim	22:35742ec80c24	2378	_lcd_bus &= ~D_LCD_E2; // Reset E2 bit
wim	26:bd897a001012	2379	}
wim	22:35742ec80c24	2380	}
wim	21:9eb628d9e164	2381
wim	22:35742ec80c24	2382	// write the new data to the SPI portexpander
wim	22:35742ec80c24	2383	_setCS(false);
wim	22:35742ec80c24	2384	_spi->write(_lcd_bus);
wim	30:033048611c01	2385	_setCS(true);
wim	21:9eb628d9e164	2386	}
wim	21:9eb628d9e164	2387
wim	21:9eb628d9e164	2388	// Set RS pin
wim	21:9eb628d9e164	2389	// Used for mbed pins, I2C bus expander or SPI shiftregister
wim	21:9eb628d9e164	2390	void TextLCD_SPI::_setRS(bool value) {
wim	21:9eb628d9e164	2391
wim	22:35742ec80c24	2392	if (value) {
wim	21:9eb628d9e164	2393	_lcd_bus \|= D_LCD_RS; // Set RS bit
wim	22:35742ec80c24	2394	}
wim	22:35742ec80c24	2395	else {
wim	21:9eb628d9e164	2396	_lcd_bus &= ~D_LCD_RS; // Reset RS bit
wim	22:35742ec80c24	2397	}
wim	21:9eb628d9e164	2398
wim	21:9eb628d9e164	2399	// write the new data to the SPI portexpander
wim	21:9eb628d9e164	2400	_setCS(false);
wim	21:9eb628d9e164	2401	_spi->write(_lcd_bus);
wim	21:9eb628d9e164	2402	_setCS(true);
wim	21:9eb628d9e164	2403	}
wim	21:9eb628d9e164	2404
wim	21:9eb628d9e164	2405	// Set BL pin
wim	21:9eb628d9e164	2406	// Used for mbed pins, I2C bus expander or SPI shiftregister
wim	21:9eb628d9e164	2407	void TextLCD_SPI::_setBL(bool value) {
wim	21:9eb628d9e164	2408
wim	22:35742ec80c24	2409	if (value) {
wim	21:9eb628d9e164	2410	_lcd_bus \|= D_LCD_BL; // Set BL bit
wim	22:35742ec80c24	2411	}
wim	22:35742ec80c24	2412	else {
wim	21:9eb628d9e164	2413	_lcd_bus &= ~D_LCD_BL; // Reset BL bit
wim	22:35742ec80c24	2414	}
wim	21:9eb628d9e164	2415
wim	21:9eb628d9e164	2416	// write the new data to the SPI portexpander
wim	21:9eb628d9e164	2417	_setCS(false);
wim	21:9eb628d9e164	2418	_spi->write(_lcd_bus);
wim	30:033048611c01	2419	_setCS(true);
wim	21:9eb628d9e164	2420	}
wim	21:9eb628d9e164	2421
wim	21:9eb628d9e164	2422	// Place the 4bit data on the databus
wim	21:9eb628d9e164	2423	// Used for mbed pins, I2C bus expander or SPI shiftregister
wim	21:9eb628d9e164	2424	void TextLCD_SPI::_setData(int value) {
wim	21:9eb628d9e164	2425	int data;
wim	21:9eb628d9e164	2426
wim	22:35742ec80c24	2427	// Set bit by bit to support any mapping of expander portpins to LCD pins
wim	22:35742ec80c24	2428
wim	22:35742ec80c24	2429	data = value & 0x0F;
wim	26:bd897a001012	2430	if (data & 0x01) {
wim	22:35742ec80c24	2431	_lcd_bus \|= D_LCD_D4; // Set Databit
wim	26:bd897a001012	2432	}
wim	26:bd897a001012	2433	else {
wim	22:35742ec80c24	2434	_lcd_bus &= ~D_LCD_D4; // Reset Databit
wim	26:bd897a001012	2435	}
wim	26:bd897a001012	2436
wim	26:bd897a001012	2437	if (data & 0x02) {
wim	22:35742ec80c24	2438	_lcd_bus \|= D_LCD_D5; // Set Databit
wim	26:bd897a001012	2439	}
wim	26:bd897a001012	2440	else {
wim	22:35742ec80c24	2441	_lcd_bus &= ~D_LCD_D5; // Reset Databit
wim	26:bd897a001012	2442	}
wim	26:bd897a001012	2443
wim	26:bd897a001012	2444	if (data & 0x04) {
wim	22:35742ec80c24	2445	_lcd_bus \|= D_LCD_D6; // Set Databit
wim	26:bd897a001012	2446	}
wim	26:bd897a001012	2447	else {
wim	22:35742ec80c24	2448	_lcd_bus &= ~D_LCD_D6; // Reset Databit
wim	26:bd897a001012	2449	}
wim	26:bd897a001012	2450
wim	26:bd897a001012	2451	if (data & 0x08) {
wim	22:35742ec80c24	2452	_lcd_bus \|= D_LCD_D7; // Set Databit
wim	26:bd897a001012	2453	}
wim	26:bd897a001012	2454	else {
wim	26:bd897a001012	2455	_lcd_bus &= ~D_LCD_D7; // Reset Databit
wim	26:bd897a001012	2456	}
wim	21:9eb628d9e164	2457
wim	22:35742ec80c24	2458	// write the new data to the SPI portexpander
wim	22:35742ec80c24	2459	_setCS(false);
wim	22:35742ec80c24	2460	_spi->write(_lcd_bus);
wim	30:033048611c01	2461	_setCS(true);
wim	21:9eb628d9e164	2462	}
wim	21:9eb628d9e164	2463
wim	21:9eb628d9e164	2464	// Set CS line.
wim	21:9eb628d9e164	2465	// Only used for SPI bus
wim	21:9eb628d9e164	2466	void TextLCD_SPI::_setCS(bool value) {
wim	21:9eb628d9e164	2467
wim	21:9eb628d9e164	2468	if (value) {
wim	21:9eb628d9e164	2469	_cs = 1; // Set CS pin
wim	21:9eb628d9e164	2470	}
wim	22:35742ec80c24	2471	else {
wim	21:9eb628d9e164	2472	_cs = 0; // Reset CS pin
wim	22:35742ec80c24	2473	}
wim	21:9eb628d9e164	2474	}
wim	21:9eb628d9e164	2475
wim	23:d47f226efb24	2476	//---------- End TextLCD_SPI ------------
wim	22:35742ec80c24	2477
wim	22:35742ec80c24	2478
wim	25:6162b31128c9	2479	//--------- Start TextLCD_SPI_N ---------
Sissors	24:fb3399713710	2480
wim	30:033048611c01	2481	/** Create a TextLCD interface using a controller with a native SPI4 interface
Sissors	24:fb3399713710	2482	*
Sissors	24:fb3399713710	2483	* @param spi SPI Bus
Sissors	24:fb3399713710	2484	* @param cs chip select pin (active low)
wim	25:6162b31128c9	2485	* @param rs Instruction/data control line
Sissors	24:fb3399713710	2486	* @param type Sets the panel size/addressing mode (default = LCD16x2)
wim	25:6162b31128c9	2487	* @param bl Backlight control line (optional, default = NC)
wim	26:bd897a001012	2488	* @param ctrl LCD controller (default = ST7032_3V3)
wim	25:6162b31128c9	2489	*/
wim	25:6162b31128c9	2490	TextLCD_SPI_N::TextLCD_SPI_N(SPI *spi, PinName cs, PinName rs, LCDType type, PinName bl, LCDCtrl ctrl) :
wim	25:6162b31128c9	2491	TextLCD_Base(type, ctrl),
wim	25:6162b31128c9	2492	_spi(spi),
wim	25:6162b31128c9	2493	_cs(cs),
wim	25:6162b31128c9	2494	_rs(rs) {
Sissors	24:fb3399713710	2495
wim	32:59c4b8f648d4	2496	// Init CS
wim	32:59c4b8f648d4	2497	_cs = 1;
wim	32:59c4b8f648d4	2498
Sissors	24:fb3399713710	2499	// Setup the spi for 8 bit data, low steady state clock,
Sissors	24:fb3399713710	2500	// rising edge capture, with a 500KHz or 1MHz clock rate
Sissors	24:fb3399713710	2501	_spi->format(8,0);
Sissors	24:fb3399713710	2502	_spi->frequency(1000000);
Sissors	24:fb3399713710	2503
Sissors	24:fb3399713710	2504	// The hardware Backlight pin is optional. Test and make sure whether it exists or not to prevent illegal access.
Sissors	24:fb3399713710	2505	if (bl != NC) {
Sissors	24:fb3399713710	2506	_bl = new DigitalOut(bl); //Construct new pin
Sissors	24:fb3399713710	2507	_bl->write(0); //Deactivate
Sissors	24:fb3399713710	2508	}
Sissors	24:fb3399713710	2509	else {
Sissors	24:fb3399713710	2510	// No Hardware Backlight pin
Sissors	24:fb3399713710	2511	_bl = NULL; //Construct dummy pin
Sissors	24:fb3399713710	2512	}
wim	30:033048611c01	2513
wim	30:033048611c01	2514	//Sanity check
wim	30:033048611c01	2515	if (_ctrl & LCD_C_SPI4) {
wim	30:033048611c01	2516	_init();
wim	30:033048611c01	2517	}
wim	30:033048611c01	2518	else {
wim	30:033048611c01	2519	error("Error: LCD Controller type does not support native SPI4 interface\n\r");
wim	30:033048611c01	2520	}
Sissors	24:fb3399713710	2521	}
Sissors	24:fb3399713710	2522
wim	25:6162b31128c9	2523	TextLCD_SPI_N::~TextLCD_SPI_N() {
Sissors	24:fb3399713710	2524	if (_bl != NULL) {delete _bl;} // BL pin
Sissors	24:fb3399713710	2525	}
Sissors	24:fb3399713710	2526
Sissors	24:fb3399713710	2527	// Not used in this mode
wim	25:6162b31128c9	2528	void TextLCD_SPI_N::_setEnable(bool value) {
Sissors	24:fb3399713710	2529	}
Sissors	24:fb3399713710	2530
Sissors	24:fb3399713710	2531	// Set RS pin
Sissors	24:fb3399713710	2532	// Used for mbed pins, I2C bus expander or SPI shiftregister
wim	25:6162b31128c9	2533	void TextLCD_SPI_N::_setRS(bool value) {
Sissors	24:fb3399713710	2534	_rs = value;
Sissors	24:fb3399713710	2535	}
Sissors	24:fb3399713710	2536
Sissors	24:fb3399713710	2537	// Set BL pin
wim	25:6162b31128c9	2538	void TextLCD_SPI_N::_setBL(bool value) {
wim	26:bd897a001012	2539	if (_bl) {
Sissors	24:fb3399713710	2540	_bl->write(value);
wim	26:bd897a001012	2541	}
Sissors	24:fb3399713710	2542	}
Sissors	24:fb3399713710	2543
wim	29:a3663151aa65	2544	// Not used in this mode
wim	29:a3663151aa65	2545	void TextLCD_SPI_N::_setData(int value) {
wim	29:a3663151aa65	2546	}
wim	29:a3663151aa65	2547
Sissors	24:fb3399713710	2548	// Write a byte using SPI
wim	25:6162b31128c9	2549	void TextLCD_SPI_N::_writeByte(int value) {
Sissors	24:fb3399713710	2550	_cs = 0;
Sissors	24:fb3399713710	2551	wait_us(1);
Sissors	24:fb3399713710	2552	_spi->write(value);
Sissors	24:fb3399713710	2553	wait_us(1);
Sissors	24:fb3399713710	2554	_cs = 1;
Sissors	24:fb3399713710	2555	}
wim	30:033048611c01	2556
wim	25:6162b31128c9	2557	//-------- End TextLCD_SPI_N ------------
wim	21:9eb628d9e164	2558
wim	21:9eb628d9e164	2559
wim	21:9eb628d9e164	2560
wim	32:59c4b8f648d4	2561	#if(1)
wim	30:033048611c01	2562	//Code checked out on logic analyser. Not yet tested on hardware..
wim	30:033048611c01	2563
wim	30:033048611c01	2564	//-------- Start TextLCD_SPI_N_3_9 --------
wim	30:033048611c01	2565
wim	30:033048611c01	2566	/** Create a TextLCD interface using a controller with a native SPI3 9 bits interface
wim	30:033048611c01	2567	*
wim	30:033048611c01	2568	* @param spi SPI Bus
wim	30:033048611c01	2569	* @param cs chip select pin (active low)
wim	30:033048611c01	2570	* @param type Sets the panel size/addressing mode (default = LCD16x2)
wim	30:033048611c01	2571	* @param bl Backlight control line (optional, default = NC)
wim	30:033048611c01	2572	* @param ctrl LCD controller (default = AIP31068)
wim	30:033048611c01	2573	*/
wim	30:033048611c01	2574	TextLCD_SPI_N_3_9::TextLCD_SPI_N_3_9(SPI *spi, PinName cs, LCDType type, PinName bl, LCDCtrl ctrl) :
wim	30:033048611c01	2575	TextLCD_Base(type, ctrl),
wim	30:033048611c01	2576	_spi(spi),
wim	33:900a94bc7585	2577	_cs(cs) {
wim	32:59c4b8f648d4	2578
wim	32:59c4b8f648d4	2579	// Init CS
wim	32:59c4b8f648d4	2580	_cs = 1;
wim	32:59c4b8f648d4	2581
wim	30:033048611c01	2582	// Setup the spi for 9 bit data, low steady state clock,
wim	30:033048611c01	2583	// rising edge capture, with a 500KHz or 1MHz clock rate
wim	32:59c4b8f648d4	2584	// _spi->format(9,0);
wim	32:59c4b8f648d4	2585	_spi->format(9,3);
wim	30:033048611c01	2586	_spi->frequency(1000000);
wim	30:033048611c01	2587
wim	30:033048611c01	2588	// The hardware Backlight pin is optional. Test and make sure whether it exists or not to prevent illegal access.
wim	30:033048611c01	2589	if (bl != NC) {
wim	30:033048611c01	2590	_bl = new DigitalOut(bl); //Construct new pin
wim	30:033048611c01	2591	_bl->write(0); //Deactivate
wim	30:033048611c01	2592	}
wim	30:033048611c01	2593	else {
wim	30:033048611c01	2594	// No Hardware Backlight pin
wim	30:033048611c01	2595	_bl = NULL; //Construct dummy pin
wim	30:033048611c01	2596	}
wim	30:033048611c01	2597
wim	30:033048611c01	2598	//Sanity check
wim	30:033048611c01	2599	if (_ctrl & LCD_C_SPI3_9) {
wim	30:033048611c01	2600	_init();
wim	30:033048611c01	2601	}
wim	30:033048611c01	2602	else {
wim	30:033048611c01	2603	error("Error: LCD Controller type does not support native SPI3 9 bits interface\n\r");
wim	30:033048611c01	2604	}
wim	30:033048611c01	2605	}
wim	30:033048611c01	2606
wim	30:033048611c01	2607	TextLCD_SPI_N_3_9::~TextLCD_SPI_N_3_9() {
wim	30:033048611c01	2608	if (_bl != NULL) {delete _bl;} // BL pin
wim	30:033048611c01	2609	}
wim	30:033048611c01	2610
wim	30:033048611c01	2611	// Not used in this mode
wim	30:033048611c01	2612	void TextLCD_SPI_N_3_9::_setEnable(bool value) {
wim	30:033048611c01	2613	}
wim	30:033048611c01	2614
wim	30:033048611c01	2615	// Set RS pin
wim	30:033048611c01	2616	// Used for mbed pins, I2C bus expander or SPI shiftregister
wim	30:033048611c01	2617	void TextLCD_SPI_N_3_9::_setRS(bool value) {
wim	30:033048611c01	2618	// The controlbits define the meaning of the next byte. This next byte can either be data or command.
wim	30:033048611c01	2619	// b8 b7...........b0
wim	30:033048611c01	2620	// RS command or data
wim	30:033048611c01	2621	//
wim	30:033048611c01	2622	// RS=1 means that next byte is data, RS=0 means that next byte is command
wim	30:033048611c01	2623	//
wim	30:033048611c01	2624
wim	30:033048611c01	2625	if (value) {
wim	30:033048611c01	2626	_controlbyte = 0x01; // Next byte is data
wim	30:033048611c01	2627	}
wim	30:033048611c01	2628	else {
wim	30:033048611c01	2629	_controlbyte = 0x00; // Next byte is command
wim	30:033048611c01	2630	}
wim	30:033048611c01	2631
wim	30:033048611c01	2632	}
wim	30:033048611c01	2633
wim	30:033048611c01	2634	// Set BL pin
wim	30:033048611c01	2635	void TextLCD_SPI_N_3_9::_setBL(bool value) {
wim	30:033048611c01	2636	if (_bl) {
wim	30:033048611c01	2637	_bl->write(value);
wim	30:033048611c01	2638	}
wim	30:033048611c01	2639	}
wim	30:033048611c01	2640
wim	30:033048611c01	2641	// Not used in this mode
wim	30:033048611c01	2642	void TextLCD_SPI_N_3_9::_setData(int value) {
wim	30:033048611c01	2643	}
wim	30:033048611c01	2644
wim	30:033048611c01	2645	// Write a byte using SPI3 9 bits mode
wim	30:033048611c01	2646	void TextLCD_SPI_N_3_9::_writeByte(int value) {
wim	30:033048611c01	2647	_cs = 0;
wim	30:033048611c01	2648	wait_us(1);
wim	30:033048611c01	2649	_spi->write( (_controlbyte << 8) \| (value & 0xFF));
wim	30:033048611c01	2650	wait_us(1);
wim	30:033048611c01	2651	_cs = 1;
wim	30:033048611c01	2652	}
wim	30:033048611c01	2653
wim	30:033048611c01	2654	//------- End TextLCD_SPI_N_3_9 -----------
wim	30:033048611c01	2655	#endif
wim	21:9eb628d9e164	2656
wim	21:9eb628d9e164	2657
wim	32:59c4b8f648d4	2658	#if(1)
wim	30:033048611c01	2659	//------- Start TextLCD_SPI_N_3_10 --------
wim	30:033048611c01	2660
wim	30:033048611c01	2661	/** Create a TextLCD interface using a controller with a native SPI3 10 bits interface
wim	30:033048611c01	2662	*
wim	30:033048611c01	2663	* @param spi SPI Bus
wim	30:033048611c01	2664	* @param cs chip select pin (active low)
wim	30:033048611c01	2665	* @param type Sets the panel size/addressing mode (default = LCD16x2)
wim	30:033048611c01	2666	* @param bl Backlight control line (optional, default = NC)
wim	30:033048611c01	2667	* @param ctrl LCD controller (default = AIP31068)
wim	30:033048611c01	2668	*/
wim	30:033048611c01	2669	TextLCD_SPI_N_3_10::TextLCD_SPI_N_3_10(SPI *spi, PinName cs, LCDType type, PinName bl, LCDCtrl ctrl) :
wim	30:033048611c01	2670	TextLCD_Base(type, ctrl),
wim	30:033048611c01	2671	_spi(spi),
wim	30:033048611c01	2672	_cs(cs) {
wim	30:033048611c01	2673
wim	32:59c4b8f648d4	2674	// Init CS
wim	32:59c4b8f648d4	2675	_cs = 1;
wim	32:59c4b8f648d4	2676
wim	30:033048611c01	2677	// Setup the spi for 10 bit data, low steady state clock,
wim	30:033048611c01	2678	// rising edge capture, with a 500KHz or 1MHz clock rate
wim	30:033048611c01	2679	_spi->format(10,0);
wim	30:033048611c01	2680	_spi->frequency(1000000);
wim	30:033048611c01	2681
wim	30:033048611c01	2682	// The hardware Backlight pin is optional. Test and make sure whether it exists or not to prevent illegal access.
wim	30:033048611c01	2683	if (bl != NC) {
wim	30:033048611c01	2684	_bl = new DigitalOut(bl); //Construct new pin
wim	30:033048611c01	2685	_bl->write(0); //Deactivate
wim	30:033048611c01	2686	}
wim	30:033048611c01	2687	else {
wim	30:033048611c01	2688	// No Hardware Backlight pin
wim	30:033048611c01	2689	_bl = NULL; //Construct dummy pin
wim	30:033048611c01	2690	}
wim	30:033048611c01	2691
wim	30:033048611c01	2692	//Sanity check
wim	30:033048611c01	2693	if (_ctrl & LCD_C_SPI3_10) {
wim	30:033048611c01	2694	_init();
wim	30:033048611c01	2695	}
wim	30:033048611c01	2696	else {
wim	30:033048611c01	2697	error("Error: LCD Controller type does not support native SPI3 10 bits interface\n\r");
wim	30:033048611c01	2698	}
wim	30:033048611c01	2699	}
wim	30:033048611c01	2700
wim	30:033048611c01	2701	TextLCD_SPI_N_3_10::~TextLCD_SPI_N_3_10() {
wim	30:033048611c01	2702	if (_bl != NULL) {delete _bl;} // BL pin
wim	30:033048611c01	2703	}
wim	30:033048611c01	2704
wim	30:033048611c01	2705	// Not used in this mode
wim	30:033048611c01	2706	void TextLCD_SPI_N_3_10::_setEnable(bool value) {
wim	30:033048611c01	2707	}
wim	30:033048611c01	2708
wim	30:033048611c01	2709	// Set RS pin
wim	30:033048611c01	2710	// Used for mbed pins, I2C bus expander or SPI shiftregister
wim	30:033048611c01	2711	void TextLCD_SPI_N_3_10::_setRS(bool value) {
wim	30:033048611c01	2712	// The controlbits define the meaning of the next byte. This next byte can either be data or command.
wim	30:033048611c01	2713	// b9 b8 b7...........b0
wim	30:033048611c01	2714	// RS RW command or data
wim	30:033048611c01	2715	//
wim	30:033048611c01	2716	// RS=1 means that next byte is data, RS=0 means that next byte is command
wim	30:033048611c01	2717	// RW=0 means that next byte is writen, RW=1 means that next byte is read (not used in this lib)
wim	30:033048611c01	2718	//
wim	30:033048611c01	2719
wim	30:033048611c01	2720	if (value) {
wim	30:033048611c01	2721	_controlbyte = 0x02; // Next byte is data
wim	30:033048611c01	2722	}
wim	30:033048611c01	2723	else {
wim	30:033048611c01	2724	_controlbyte = 0x00; // Next byte is command
wim	30:033048611c01	2725	}
wim	30:033048611c01	2726
wim	30:033048611c01	2727	}
wim	30:033048611c01	2728
wim	30:033048611c01	2729	// Set BL pin
wim	30:033048611c01	2730	void TextLCD_SPI_N_3_10::_setBL(bool value) {
wim	30:033048611c01	2731	if (_bl) {
wim	30:033048611c01	2732	_bl->write(value);
wim	30:033048611c01	2733	}
wim	30:033048611c01	2734	}
wim	30:033048611c01	2735
wim	30:033048611c01	2736	// Not used in this mode
wim	30:033048611c01	2737	void TextLCD_SPI_N_3_10::_setData(int value) {
wim	30:033048611c01	2738	}
wim	30:033048611c01	2739
wim	30:033048611c01	2740	// Write a byte using SPI3 10 bits mode
wim	30:033048611c01	2741	void TextLCD_SPI_N_3_10::_writeByte(int value) {
wim	30:033048611c01	2742	_cs = 0;
wim	30:033048611c01	2743	wait_us(1);
wim	30:033048611c01	2744	_spi->write( (_controlbyte << 8) \| (value & 0xFF));
wim	30:033048611c01	2745	wait_us(1);
wim	30:033048611c01	2746	_cs = 1;
wim	30:033048611c01	2747	}
wim	30:033048611c01	2748
wim	30:033048611c01	2749	//------- End TextLCD_SPI_N_3_10 ----------
wim	32:59c4b8f648d4	2750	#endif
wim	32:59c4b8f648d4	2751
wim	32:59c4b8f648d4	2752	#if(0)
wim	32:59c4b8f648d4	2753	//Code to be checked out on logic analyser. Not yet tested on hardware..
wim	32:59c4b8f648d4	2754
wim	32:59c4b8f648d4	2755	//------- Start TextLCD_SPI_N_3_16 --------
wim	32:59c4b8f648d4	2756
wim	32:59c4b8f648d4	2757	/** Create a TextLCD interface using a controller with a native SPI3 16 bits interface
wim	32:59c4b8f648d4	2758	*
wim	32:59c4b8f648d4	2759	* @param spi SPI Bus
wim	32:59c4b8f648d4	2760	* @param cs chip select pin (active low)
wim	32:59c4b8f648d4	2761	* @param type Sets the panel size/addressing mode (default = LCD16x2)
wim	32:59c4b8f648d4	2762	* @param bl Backlight control line (optional, default = NC)
wim	32:59c4b8f648d4	2763	* @param ctrl LCD controller (default = PT6314)
wim	32:59c4b8f648d4	2764	*/
wim	32:59c4b8f648d4	2765	TextLCD_SPI_N_3_16::TextLCD_SPI_N_3_16(SPI *spi, PinName cs, LCDType type, PinName bl, LCDCtrl ctrl) :
wim	32:59c4b8f648d4	2766	TextLCD_Base(type, ctrl),
wim	32:59c4b8f648d4	2767	_spi(spi),
wim	32:59c4b8f648d4	2768	_cs(cs) {
wim	32:59c4b8f648d4	2769
wim	32:59c4b8f648d4	2770	// Init CS
wim	32:59c4b8f648d4	2771	_cs = 1;
wim	32:59c4b8f648d4	2772
wim	32:59c4b8f648d4	2773	// Setup the spi for 8 bit data, low steady state clock,
wim	32:59c4b8f648d4	2774	// rising edge capture, with a 500KHz or 1MHz clock rate
wim	32:59c4b8f648d4	2775	_spi->format(8,0);
wim	32:59c4b8f648d4	2776	_spi->frequency(1000000);
wim	32:59c4b8f648d4	2777
wim	32:59c4b8f648d4	2778	// The hardware Backlight pin is optional. Test and make sure whether it exists or not to prevent illegal access.
wim	32:59c4b8f648d4	2779	if (bl != NC) {
wim	32:59c4b8f648d4	2780	_bl = new DigitalOut(bl); //Construct new pin
wim	32:59c4b8f648d4	2781	_bl->write(0); //Deactivate
wim	32:59c4b8f648d4	2782	}
wim	32:59c4b8f648d4	2783	else {
wim	32:59c4b8f648d4	2784	// No Hardware Backlight pin
wim	32:59c4b8f648d4	2785	_bl = NULL; //Construct dummy pin
wim	32:59c4b8f648d4	2786	}
wim	32:59c4b8f648d4	2787
wim	32:59c4b8f648d4	2788	//Sanity check
wim	32:59c4b8f648d4	2789	if (_ctrl & LCD_C_SPI3_16) {
wim	32:59c4b8f648d4	2790	_init();
wim	32:59c4b8f648d4	2791	}
wim	32:59c4b8f648d4	2792	else {
wim	32:59c4b8f648d4	2793	error("Error: LCD Controller type does not support native SPI3 16 bits interface\n\r");
wim	32:59c4b8f648d4	2794	}
wim	32:59c4b8f648d4	2795	}
wim	32:59c4b8f648d4	2796
wim	32:59c4b8f648d4	2797	TextLCD_SPI_N_3_16::~TextLCD_SPI_N_3_16() {
wim	32:59c4b8f648d4	2798	if (_bl != NULL) {delete _bl;} // BL pin
wim	32:59c4b8f648d4	2799	}
wim	32:59c4b8f648d4	2800
wim	32:59c4b8f648d4	2801	// Not used in this mode
wim	32:59c4b8f648d4	2802	void TextLCD_SPI_N_3_16::_setEnable(bool value) {
wim	32:59c4b8f648d4	2803	}
wim	32:59c4b8f648d4	2804
wim	32:59c4b8f648d4	2805	// Set RS pin
wim	32:59c4b8f648d4	2806	// Used for mbed pins, I2C bus expander or SPI shiftregister
wim	32:59c4b8f648d4	2807	void TextLCD_SPI_N_3_16::_setRS(bool value) {
wim	32:59c4b8f648d4	2808	// The 16bit mode is split in 2 bytes. The first byte is for synchronisation and controlbits. The controlbits define the meaning of the next byte.
wim	32:59c4b8f648d4	2809	// The 8 actual bits represent either a data or a command byte.
wim	32:59c4b8f648d4	2810	// b15 b14 b13 b12 b11 b10 b9 b8 - b7 b6 b5 b4 b3 b2 b1 b0
wim	32:59c4b8f648d4	2811	// 1 1 1 1 1 RW RS 0 d7 d6 d5 d4 d3 d2 d1 d0
wim	32:59c4b8f648d4	2812	//
wim	32:59c4b8f648d4	2813	// RS=1 means that next byte is data, RS=0 means that next byte is command
wim	32:59c4b8f648d4	2814	// RW=0 means that next byte is writen, RW=1 means that next byte is read (not used in this lib)
wim	32:59c4b8f648d4	2815	//
wim	32:59c4b8f648d4	2816
wim	32:59c4b8f648d4	2817	if (value) {
wim	32:59c4b8f648d4	2818	_controlbyte = 0xFA; // Next byte is data
wim	32:59c4b8f648d4	2819	}
wim	32:59c4b8f648d4	2820	else {
wim	32:59c4b8f648d4	2821	_controlbyte = 0xF8; // Next byte is command
wim	32:59c4b8f648d4	2822	}
wim	32:59c4b8f648d4	2823	}
wim	32:59c4b8f648d4	2824
wim	32:59c4b8f648d4	2825	// Set BL pin
wim	32:59c4b8f648d4	2826	void TextLCD_SPI_N_3_16::_setBL(bool value) {
wim	32:59c4b8f648d4	2827	if (_bl) {
wim	32:59c4b8f648d4	2828	_bl->write(value);
wim	32:59c4b8f648d4	2829	}
wim	32:59c4b8f648d4	2830	}
wim	32:59c4b8f648d4	2831
wim	32:59c4b8f648d4	2832	// Not used in this mode
wim	32:59c4b8f648d4	2833	void TextLCD_SPI_N_3_16::_setData(int value) {
wim	32:59c4b8f648d4	2834	}
wim	32:59c4b8f648d4	2835
wim	32:59c4b8f648d4	2836
wim	32:59c4b8f648d4	2837	// Write a byte using SPI3 16 bits mode
wim	32:59c4b8f648d4	2838	void TextLCD_SPI_N_3_16::_writeByte(int value) {
wim	32:59c4b8f648d4	2839	_cs = 0;
wim	32:59c4b8f648d4	2840	wait_us(1);
wim	32:59c4b8f648d4	2841
wim	32:59c4b8f648d4	2842	_spi->write(_controlbyte);
wim	32:59c4b8f648d4	2843
wim	32:59c4b8f648d4	2844	_spi->write(value);
wim	32:59c4b8f648d4	2845
wim	32:59c4b8f648d4	2846	wait_us(1);
wim	32:59c4b8f648d4	2847	_cs = 1;
wim	32:59c4b8f648d4	2848	}
wim	32:59c4b8f648d4	2849
wim	32:59c4b8f648d4	2850	//------- End TextLCD_SPI_N_3_16 ----------
wim	32:59c4b8f648d4	2851	#endif
wim	32:59c4b8f648d4	2852
wim	32:59c4b8f648d4	2853	#if(1)
wim	32:59c4b8f648d4	2854	//------- Start TextLCD_SPI_N_3_24 --------
wim	32:59c4b8f648d4	2855
wim	32:59c4b8f648d4	2856	/** Create a TextLCD interface using a controller with a native SPI3 24 bits interface
wim	32:59c4b8f648d4	2857	*
wim	32:59c4b8f648d4	2858	* @param spi SPI Bus
wim	32:59c4b8f648d4	2859	* @param cs chip select pin (active low)
wim	32:59c4b8f648d4	2860	* @param type Sets the panel size/addressing mode (default = LCD16x2)
wim	32:59c4b8f648d4	2861	* @param bl Backlight control line (optional, default = NC)
wim	32:59c4b8f648d4	2862	* @param ctrl LCD controller (default = SSD1803)
wim	32:59c4b8f648d4	2863	*/
wim	32:59c4b8f648d4	2864	TextLCD_SPI_N_3_24::TextLCD_SPI_N_3_24(SPI *spi, PinName cs, LCDType type, PinName bl, LCDCtrl ctrl) :
wim	32:59c4b8f648d4	2865	TextLCD_Base(type, ctrl),
wim	32:59c4b8f648d4	2866	_spi(spi),
wim	32:59c4b8f648d4	2867	_cs(cs) {
wim	32:59c4b8f648d4	2868
wim	32:59c4b8f648d4	2869	// Init CS
wim	32:59c4b8f648d4	2870	_cs = 1;
wim	32:59c4b8f648d4	2871
wim	32:59c4b8f648d4	2872	// Setup the spi for 8 bit data, low steady state clock,
wim	32:59c4b8f648d4	2873	// rising edge capture, with a 500KHz or 1MHz clock rate
wim	32:59c4b8f648d4	2874	_spi->format(8,0);
wim	32:59c4b8f648d4	2875	_spi->frequency(1000000);
wim	32:59c4b8f648d4	2876
wim	32:59c4b8f648d4	2877	// The hardware Backlight pin is optional. Test and make sure whether it exists or not to prevent illegal access.
wim	32:59c4b8f648d4	2878	if (bl != NC) {
wim	32:59c4b8f648d4	2879	_bl = new DigitalOut(bl); //Construct new pin
wim	32:59c4b8f648d4	2880	_bl->write(0); //Deactivate
wim	32:59c4b8f648d4	2881	}
wim	32:59c4b8f648d4	2882	else {
wim	32:59c4b8f648d4	2883	// No Hardware Backlight pin
wim	32:59c4b8f648d4	2884	_bl = NULL; //Construct dummy pin
wim	32:59c4b8f648d4	2885	}
wim	32:59c4b8f648d4	2886
wim	32:59c4b8f648d4	2887	//Sanity check
wim	32:59c4b8f648d4	2888	if (_ctrl & LCD_C_SPI3_24) {
wim	32:59c4b8f648d4	2889	_init();
wim	32:59c4b8f648d4	2890	}
wim	32:59c4b8f648d4	2891	else {
wim	32:59c4b8f648d4	2892	error("Error: LCD Controller type does not support native SPI3 24 bits interface\n\r");
wim	32:59c4b8f648d4	2893	}
wim	32:59c4b8f648d4	2894	}
wim	32:59c4b8f648d4	2895
wim	32:59c4b8f648d4	2896	TextLCD_SPI_N_3_24::~TextLCD_SPI_N_3_24() {
wim	32:59c4b8f648d4	2897	if (_bl != NULL) {delete _bl;} // BL pin
wim	32:59c4b8f648d4	2898	}
wim	32:59c4b8f648d4	2899
wim	32:59c4b8f648d4	2900	// Not used in this mode
wim	32:59c4b8f648d4	2901	void TextLCD_SPI_N_3_24::_setEnable(bool value) {
wim	32:59c4b8f648d4	2902	}
wim	32:59c4b8f648d4	2903
wim	32:59c4b8f648d4	2904	// Set RS pin
wim	32:59c4b8f648d4	2905	// Used for mbed pins, I2C bus expander or SPI shiftregister
wim	32:59c4b8f648d4	2906	void TextLCD_SPI_N_3_24::_setRS(bool value) {
wim	32:59c4b8f648d4	2907	// The 24bit mode is split in 3 bytes. The first byte is for synchronisation and controlbits. The controlbits define the meaning of the next two bytes.
wim	32:59c4b8f648d4	2908	// Each byte encodes 4 actual bits. The 8 actual bits represent either a data or a command byte.
wim	32:59c4b8f648d4	2909	// b23 b22 b21 b20 b19 b18 b17 b16 - b15 b14 b13 b12 b11 b10 b9 b8 - b7 b6 b5 b4 b3 b2 b1 b0
wim	32:59c4b8f648d4	2910	// 1 1 1 1 1 RW RS 0 d0 d1 d2 d3 0 0 0 0 d4 d5 d6 d7 0 0 0 0
wim	32:59c4b8f648d4	2911	//
wim	32:59c4b8f648d4	2912	// RS=1 means that next byte is data, RS=0 means that next byte is command
wim	32:59c4b8f648d4	2913	// RW=0 means that next byte is writen, RW=1 means that next byte is read (not used in this lib)
wim	32:59c4b8f648d4	2914	//
wim	32:59c4b8f648d4	2915	// Note: SPI3_24 expects LSB first. This is inconsistent with regular SPI convention (and hardware) that sends MSB first.
wim	32:59c4b8f648d4	2916
wim	32:59c4b8f648d4	2917	if (value) {
wim	32:59c4b8f648d4	2918	_controlbyte = 0xFA; // Next byte is data
wim	32:59c4b8f648d4	2919	}
wim	32:59c4b8f648d4	2920	else {
wim	32:59c4b8f648d4	2921	_controlbyte = 0xF8; // Next byte is command
wim	32:59c4b8f648d4	2922	}
wim	32:59c4b8f648d4	2923
wim	32:59c4b8f648d4	2924	}
wim	32:59c4b8f648d4	2925
wim	32:59c4b8f648d4	2926	// Set BL pin
wim	32:59c4b8f648d4	2927	void TextLCD_SPI_N_3_24::_setBL(bool value) {
wim	32:59c4b8f648d4	2928	if (_bl) {
wim	32:59c4b8f648d4	2929	_bl->write(value);
wim	32:59c4b8f648d4	2930	}
wim	32:59c4b8f648d4	2931	}
wim	32:59c4b8f648d4	2932
wim	32:59c4b8f648d4	2933	// Not used in this mode
wim	32:59c4b8f648d4	2934	void TextLCD_SPI_N_3_24::_setData(int value) {
wim	32:59c4b8f648d4	2935	}
wim	32:59c4b8f648d4	2936
wim	32:59c4b8f648d4	2937	//Mapping table to flip the bits around cause SPI3_24 expects LSB first.
wim	32:59c4b8f648d4	2938	const uint8_t map3_24[16] = {0x00, 0x80, 0x40, 0xC0, 0x20, 0xA0, 0x60, 0xE0, 0x10, 0x90, 0x50, 0xD0, 0x30, 0xB0, 0x70, 0xF0};
wim	32:59c4b8f648d4	2939
wim	32:59c4b8f648d4	2940	// Write a byte using SPI3 24 bits mode
wim	32:59c4b8f648d4	2941	void TextLCD_SPI_N_3_24::_writeByte(int value) {
wim	32:59c4b8f648d4	2942	_cs = 0;
wim	32:59c4b8f648d4	2943	wait_us(1);
wim	32:59c4b8f648d4	2944	_spi->write(_controlbyte);
wim	32:59c4b8f648d4	2945
wim	32:59c4b8f648d4	2946	//Map and send the LSB nibble
wim	32:59c4b8f648d4	2947	_spi->write( map3_24[value & 0x0F]);
wim	32:59c4b8f648d4	2948
wim	32:59c4b8f648d4	2949	//Map and send the MSB nibble
wim	32:59c4b8f648d4	2950	_spi->write( map3_24[(value >> 4) & 0x0F]);
wim	32:59c4b8f648d4	2951
wim	32:59c4b8f648d4	2952	wait_us(1);
wim	32:59c4b8f648d4	2953	_cs = 1;
wim	32:59c4b8f648d4	2954	}
wim	32:59c4b8f648d4	2955
wim	32:59c4b8f648d4	2956	//------- End TextLCD_SPI_N_3_24 ----------
wim	30:033048611c01	2957	#endif

Repository toolbox

Export to desktop IDE

Repository details

Type:	Library
Created:	12 Mar 2020
Imports:	5
Forks:	0
Commits:	43
Dependents:	1
Dependencies:	0
Followers:	2

TextLCD.cpp@33:900a94bc7585, 2014-08-28 (annotated)

Who changed what in which revision?

Repository toolbox

Repository details

Important Information for this Arm website

Access Warning