Change to "#define DEFAULT 1" → "#define DEFAULT 0" and "#define LCM1602 0" → "#define LCM1602 1" in the TextLCD_Config.h
Dependents: Test_TextLCD_F303K
Diff: TextLCD.cpp
- Revision:
- 31:ef31cd8a00d1
- Parent:
- 30:033048611c01
- Child:
- 32:59c4b8f648d4
--- a/TextLCD.cpp Sat Jun 28 14:27:32 2014 +0000 +++ b/TextLCD.cpp Sun Jun 29 14:55:50 2014 +0000 @@ -812,191 +812,6 @@ return 0x80 | getAddress(column, row); } -#if(0) -// This is new method to return the memory address based on row, column and displaytype. -// -/** Return the memoryaddress of screen column and row location - * - * @param column The horizontal position from the left, indexed from 0 - * @param row The vertical position from the top, indexed from 0 - * @param return The memoryaddress of screen column and row location - * - * Note: some configurations are commented out because they have not yet been tested due to lack of hardware - */ -int TextLCD_Base::getAddress(int column, int row) { - - switch (_type) { - case LCD8x1: -// case LCD12x1: -// case LCD16x1B: -// case LCD20x1: - case LCD24x1: -// case LCD40x1: - return 0x00 + column; - - case LCD16x1: - // LCD16x1 is a special layout of LCD8x2 - if (column<8) - return 0x00 + column; - else - return 0x40 + (column - 8); - - case LCD8x2D: - // LCD8x2B is a special layout of LCD16x1 - if (row==0) - return 0x00 + column; - else - return 0x08 + column; - - case LCD8x2: - case LCD12x2: - case LCD16x2: - case LCD20x2: - case LCD24x2: - case LCD40x2: - return 0x00 + (row * 0x40) + column; - -// Not sure about this one, seems wrong. -// Left in for compatibility with original library - case LCD16x2B: - return 0x00 + (row * 40) + column; - - -// Special mode for ST7036 -// case LCD16x3: - -// Special mode for PCF2116 - case LCD12x3B: - //Display bottom three rows of four - switch (row) { - case 0: - return 0x20 + column; - case 1: - return 0x40 + column; - case 2: - return 0x60 + column; - } - -#if(0) - case LCD12x3C: - //Display top three rows of four - switch (row) { - case 0: - return 0x00 + column; - case 1: - return 0x20 + column; - case 2: - return 0x40 + column; - } -#endif - - case LCD12x4: - switch (row) { - case 0: - return 0x00 + column; - case 1: - return 0x40 + column; - case 2: - return 0x0C + column; - case 3: - return 0x4C + column; - } - -// Special mode for PCF2116 (and KS0078) - case LCD12x4B: - switch (row) { - case 0: - return 0x00 + column; - case 1: - return 0x20 + column; - case 2: - return 0x40 + column; - case 3: - return 0x60 + column; - } - - case LCD16x4: - switch (row) { - case 0: - return 0x00 + column; - case 1: - return 0x40 + column; - case 2: - return 0x10 + column; - case 3: - return 0x50 + column; - } - - case LCD20x4: - switch (row) { - case 0: - return 0x00 + column; - case 1: - return 0x40 + column; - case 2: - return 0x14 + column; - case 3: - return 0x54 + column; - } - -// Special mode for KS0078 - case LCD24x4B: - switch (row) { - case 0: - return 0x00 + column; - case 1: - return 0x20 + column; - case 2: - return 0x40 + column; - case 3: - return 0x60 + column; - } - - case LCD40x4: - // LCD40x4 is a special case since it has 2 controllers - // Each controller is configured as 40x2 - if (row<2) { - // Test to see if we need to switch between controllers - if (_ctrl_idx != _LCDCtrl_0) { - - // Second LCD controller Cursor Off - _setCursorAndDisplayMode(_currentMode, CurOff_BlkOff); - - // Select primary controller - _ctrl_idx = _LCDCtrl_0; - - // Restore cursormode on primary LCD controller - _setCursorAndDisplayMode(_currentMode, _currentCursor); - } - - return 0x00 + (row * 0x40) + column; - } - else { - - // Test to see if we need to switch between controllers - if (_ctrl_idx != _LCDCtrl_1) { - // Primary LCD controller Cursor Off - _setCursorAndDisplayMode(_currentMode, CurOff_BlkOff); - - // Select secondary controller - _ctrl_idx = _LCDCtrl_1; - - // Restore cursormode on secondary LCD controller - _setCursorAndDisplayMode(_currentMode, _currentCursor); - } - - return 0x00 + ((row-2) * 0x40) + column; - } - -// Should never get here. - default: - return 0x00; - } -} - -#else - -//Test of Addressing Mode encoded in LCDType // This is new method to return the memory address based on row, column and displaytype. // @@ -1128,10 +943,6 @@ } -#endif - - - /** Set the memoryaddress of screen column and row location * * @param column The horizontal position from the left, indexed from 0 @@ -1175,50 +986,7 @@ // Columns encoded in b7..b0 //return (_type & 0xFF); - return _nr_cols; - -#if(0) - switch (_type) { - case LCD8x1: - case LCD8x2: - case LCD8x2B: - return 8; - - case LCD12x2: - case LCD12x3B: -// case LCD12x3C: - case LCD12x4: - case LCD12x4B: - return 12; - - case LCD16x1: - case LCD16x2: - case LCD16x2B: -// case LCD16x3: - case LCD16x4: - return 16; - -// case LCD20x1: - case LCD20x2: - case LCD20x4: - return 20; - - case LCD24x1: - case LCD24x2: -// case LCD24x3B: - case LCD24x4B: - return 24; - -// case LCD40x1: - case LCD40x2: - case LCD40x4: - return 40; - -// Should never get here. - default: - return 0; - } -#endif + return _nr_cols; } /** Return the number of rows @@ -1232,45 +1000,6 @@ // Rows encoded in b15..b8 //return ((_type >> 8) & 0xFF); return _nr_rows; - -#if(0) - switch (_type) { - case LCD8x1: - case LCD16x1: -// case LCD20x1: - case LCD24x1: -// case LCD40x1: - return 1; - - case LCD8x2: - case LCD8x2B: - case LCD12x2: - case LCD16x2: - case LCD16x2B: - case LCD20x2: - case LCD24x2: - case LCD40x2: - return 2; - - case LCD12x3B: -// case LCD12x3C: -// case LCD16x3: -// case LCD24x3B: - return 3; - - case LCD12x4: - case LCD12x4B: - case LCD16x4: - case LCD20x4: - case LCD24x4B: - case LCD40x4: - return 4; - -// Should never get here. - default: - return 0; - } -#endif } /** Set the Cursormode @@ -1283,8 +1012,7 @@ _currentCursor = cursorMode; // Configure only current LCD controller - _setCursorAndDisplayMode(_currentMode, _currentCursor); - + _setCursorAndDisplayMode(_currentMode, _currentCursor); } /** Set the Displaymode @@ -1748,21 +1476,6 @@ _bl = NULL; //Construct dummy pin } -#if(0) - //Sanity check - switch (_ctrl) { - case ST7032_3V3: - case ST7032_5V: - case PCF21XX_3V3: -// case PCF21XX_5V: - _init(); - break; - - default: - error("Error: LCD Controller type does not support native I2C interface\n\r"); - } -#endif - //Sanity check if (_ctrl & LCD_C_I2C) { _init(); @@ -2013,20 +1726,6 @@ _bl = NULL; //Construct dummy pin } -#if(0) - //Sanity check - switch (_ctrl) { - case ST7032_3V3: - case ST7032_5V: - case WS0010: - _init(); - break; - - default: - error("Error: LCD Controller type does not support native SPI4 interface\n\r"); - } -#endif - //Sanity check if (_ctrl & LCD_C_SPI4) { _init();