Sean Smith
/
WIP
Initial Commit
Diff: inc/app_config.h
- Revision:
- 1:384a1737b0df
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/inc/app_config.h Tue May 28 19:37:12 2019 +0000 @@ -0,0 +1,112 @@ +/*************************************************************************//** + * @file app_config.h + * @brief Configuration file of AD5686 firmware example program + * @author ssmith (sean.smith@analog.com) +****************************************************************************** +* Copyright (c) 2019 Analog Devices, Inc. +* +* All rights reserved. +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions are met: +* - Redistributions of source code must retain the above copyright notice, +* this list of conditions and the following disclaimer. +* - Redistributions in binary form must reproduce the above copyright notice, +* this list of conditions and the following disclaimer in the documentation +* and/or other materials provided with the distribution. +* - Modified versions of the software must be conspicuously marked as such. +* - This software is licensed solely and exclusively for use with +* processors/products manufactured by or for Analog Devices, Inc. +* - This software may not be combined or merged with other code in any manner +* that would cause the software to become subject to terms and +* conditions which differ from those listed here. +* - Neither the name of Analog Devices, Inc. nor the names of its +* contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* - The use of this software may or may not infringe the patent rights +* of one or more patent holders. This license does not release you from +* the requirement that you obtain separate licenses from these patent +* holders to use this software. +* +* THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES, INC. AND CONTRIBUTORS "AS IS" +* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, +* NON-INFRINGEMENT, TITLE, MERCHANTABILITY AND FITNESS FOR A +* PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ANALOG DEVICES, +* INC. OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, PUNITIVE OR CONSEQUENTIAL DAMAGES +* (INCLUDING, BUT NOT LIMITED TO, DAMAGES ARISING OUT OF CLAIMS OF +* INTELLECTUAL PROPERTY RIGHTS INFRINGEMENT; PROCUREMENT OF SUBSTITUTE +* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) +* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, +* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING +* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +* POSSIBILITY OF SUCH DAMAGE. +* +* 20180927-7CBSD SLA +*****************************************************************************/ + +#ifndef _APP_CONFIG_H_ +#define _APP_CONFIG_H_ + +#include <stdint.h> +#include "platform_drivers.h" +#ifdef __cplusplus +extern "C" +{ +#endif +#ifdef __cplusplus +#include "ad5686.h" +} +#endif + + +#ifndef ACTIVE_DEVICE +/** + #define your chosen device here from the + ad5686_type (ad5686.h) enum +*/ +#define ACTIVE_DEVICE ID_AD5686R +#endif // ! + +#define ARDUINO + + +/** + The ADI SDP_K1 can be used with both arduino headers + or the 120-pin SDP connector found on ADI evaluation + boards. The default is the SDP connector + + Uncomment the ARDUINO #define above to enable the ARDUINO connector + +*/ +//#warning check this +#ifdef ARDUINO + #define I2C_SCL D15 + #define I2C_SDA D14 + + #define SPI_CS D10 + #define SPI_MISO D12 + #define SPI_MOSI D11 + #define SPI_SCK D13 + + #define GAIN_PIN D8 + #define RESET_PIN D9 + #define LDAC_PIN D7 + #define ADDR0_PIN D6 +#else + + #define I2C_SCL SDP_I2C_SCL + #define I2C_SDA SDP_I2C_SDA + + #define SPI_CS SDP_SPI_CS_A + #define SPI_MISO SDP_SPI_MISO + #define SPI_MOSI SDP_SPI_MOSI + #define SPI_SCK SDP_SPI_SCK + + #define GAIN_PIN SDP_GPIO_0 + #define RESET_PIN SDP_GPIO_2 + #define LDAC_PIN SDP_GPIO_3 + #define ADDR0_PIN SDP_GPIO_4 +#endif + +#endif //_APP_CONFIG_H_ \ No newline at end of file