File content as of revision 11:1b7aaf37a131:

/**
 *
 * \file ccmLIB.h
 * \brief CCM Library API.
 * Copyright Sensinode Ltd 2013
 *
 *  \section ccm-api CCM Library API:
 *  - ccm_sec_init(), A function to init CCM library.
 *  - ccm_process_run(), A function to run configured CCM process
 *
 *  \section ccm-inctuction CCM process sequency:
 *  1. Init CCM library by , ccm key, ccm_sec_init()
 *  	- security level
 *  	- 128-bit ccm key
 *  	- mode: AES_CCM_ENCRYPT or AES_CCM_DECRYPT
 *  	- CCM L parameter: 2 or 3 depends nonce legth (802.15.4 use 2 and TLS security use 3)
 *  2. Define ADATA pointer and length, if returned global structure mic_len field is > 0
 *  3. Set Data pointer and length
 *  4. Do configured CCM process ccm_process_run()
 *  5. Check Return value:
 *  	-If 0 Process ok
 *  	-< 0 MIC fail or parameter fail
 */
#ifdef __cplusplus
extern "C" {
#endif
#ifndef CCMLIB_H_
#define CCMLIB_H_
#define AES_NO_SECURITY 		0x00
#define AES_SECURITY_LEVEL_MIC32 	0x01
#define AES_SECURITY_LEVEL_MIC64 	0x02
#define AES_SECURITY_LEVEL_MIC128 	0x03
#define AES_SECURITY_LEVEL_ENC 		0x04
#define AES_SECURITY_LEVEL_ENC_MIC32 	0x05
#define AES_SECURITY_LEVEL_ENC_MIC64 	0x06
#define AES_SECURITY_LEVEL_ENC_MIC128 	0x07

#define AES_CCM_ENCRYPT		0x00
#define AES_CCM_DECRYPT		0x01

/*!
 * \struct ccm_globals_t
 * \brief CCM global structure.
 * Structure is used to configure NONCE, adata and data before call ccm_process_run().
 */
typedef struct
{
	uint8_t exp_nonce[15];	/**< CCM NONCE buffer Nonce */
	uint8_t *data_ptr;		/**< Pointer to Data IN */
	uint16_t data_len;		/**< Length of Data IN */
	uint8_t *adata_ptr;		/**< Pointer to Auhentication data */
	uint16_t adata_len;		/**< Length of Auhentication data */
	uint8_t mic_len;		/**< ccm_sec_init() will set here length of MIC */
	uint8_t *mic;			/**< Encrypt process will write MIC and decode compare given MIC */
}ccm_globals_t;

/**
 * \brief A function to init CCM library.
 * \param sec_level Used CCM security level (0-7).
 * \param ccm_key pointer to 128-key.
 * \param mode AES_CCM_ENCRYPT or AES_CCM_DECRYPT
 * \param ccm_l cuold be 2 or 3. 2 when NONCE length is 13 and 3 when length is 12. (NONCE Len= (15-ccm_l))
 *
 * \return Pointer to Global CCM paramameter buffer.
 * \return 0 When parameter fail or CCM is Busy.
 */
extern ccm_globals_t * ccm_sec_init(uint8_t sec_level, uint8_t *ccm_key, uint8_t mode, uint8_t ccm_l);
/**
 * \brief A function to run configured CCM process.
 * When AES_CCM_ENCRYPT mode is selected and MIC is needed library will save MIC direct after  when data ends.
 * \param sec_level Used CCM security level (0-7).
 * \param ccm_key pointer to 128-key.
 * \param mode AES_CCM_ENCRYPT or AES_CCM_DECRYPT
 * \param ccm_l cuold be 2 or 3. 2 when NONCE length is 13 and 3 when length is 12. (NONCE Len= (15-ccm_l))
 *
 * \return 0 CCM process OK and when AES_CCM_DECRYPT mode was selectected also MIC was correct.
 * \return -1 Init have not called or data or adata pointers or lengths are zero.
 * \return -2 Null pointer given to function
 */
extern int8_t ccm_process_run(ccm_globals_t *ccm_params);
#ifdef __cplusplus
}
#endif
#endif /* CCMLIB_H_ */